Default Factory Settings??

I have recently needed to open a few ports but do not know my password and it is not the default password. I figured it not possible to recover my password? If i reset the router to default factory settings what happens? Will i have to reconnect all wireless adapters to my 3 computers in my house? Thanks

If you are not remembering your assigned password .....use default password admin ....
If it is still not working reset the router ....
Reset will erase all the settings wired as well as wireless settings in the router .....
It will work under factory default settings .... that is with Linksys network name & no security ....
After reset ..... you need to again reconfigure the router .... this includes wireless settings also ....

Similar Messages

Reset hp envy 4500 printer to default factory settings

The printer indicates that the cartridges are not suitable for this printer. That is strange, because both cartridges are original HP cartridges. I'm looking for a way to reset the printer to the default factory settings, but I can't find a way to do this neither in the manual nor on the printer itself. Does anyone have a suggestion? Thank you very much.

did you find a way to resolve this? i am having the same error message and when i called for support, they said i just needed to buy a new printer. Because of this error message blocking the entire screen, I cannot reset anything or access the main menu. It seems like it's an issue that needs to be fixed manually by taking the printer apart simply because there is not an emergency trick mentioned by staff or by manual that I have found. Any help besides replacing the idiot box all together?

TS1717 restoring default factory settings without itunes as both may have malware

How can I restoring default factory settings without itunes on my ipod 1 and ipod 3rd generation, as both may have malware aswell as 3 laptops, 2 mobile, TV snd BluRay Browser.
any advice will be greatly appreciated.
have tried to disinfect with Kaspersky products but the malware just overwrites everything that is put into the p.c. so I need to use just the pad itself, that is, of course, if it allows me access.
theres nothing like a ipad scorned, ask my weary eyes. cheers

yep, unfortunately can't reset without the passcode either.
With regards to doing a restore, do you mean:
open itunes on my computer
click on my device on the left
go to the device summary
click restore
it then asks if i want to back up before i restore (to which i say no)
then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this!

T3+ - reset all parameters to default / factory settings...

Hi
I was looking for this in the documentation but found .... nothing.
i want to reset t3+ storage array to default settings.
How to do it?
Regards
Paul

There is a command but it is password protected for Sun Service personnel only.
What problem are you trying to fix that requires a factory reset?
The defaults for the 'sys' and 'set' commands are available in the T3+ Service manual which can be downloaded from docs.sun.com.

AirPort Express - Keeps Defaulting to Factory Settings

Hi everybody:
I just got an AirPort Express to broadcast my broadband internet throughout my apartment.
I connected it to my cable modem by ethernet cable, created a new network in Airport Utility, and it set up just fine.
I noticed that the light on the Airport Express was flashing amber, although in the A.Utility, it showed green with a successful connection.
The Airport Express is placed directly next to my computer.
Everything was working great (for a while), and I was even able to set up another Airport Express on that same network to broadcast AirTunes in another room. That connection was successful, and the light on Airport Express #2 glowed green.
After a few hours however, I lost connection.
And in Airport Utility, the status on Airport #1 (the one used to create the new network & connected by ethernet to my modem) showed that it had been defaulted to factory settings.
I then manually reset both Airports to default settings, set up the whole configuration again by creating a whole new network, and everything worked as before (#1 flashing amber, but status good in A.Utility; #2 glowed green), but again, after a few hours lost connection #1 status showed default factory settings.
There's a good chance that I'm doing something wrong -- any ideas?
Any wisdom is greatly appreciated.

Usually, if you have an amber light on the Express, there's also an amber light in AirPort Utility when you check the settings.
Click on the word "Status" to see if there are any messages in the window that opens. A flashing amber light can sometimes be a message that a firmware update is available for the AirPort Express.

How to set apple tv back to factory settings

I have the new Apple TV - the black one and I Jailbreaked it using SeasonPass so I could instal FLASHTV and watch AVI files but now I want to set it back to its default factory settings - how does one do this?

Reload iOS when it's connected to iTunes direct on your mac

What is the default/factory setting for the brightness on the iPhone 4?

I prefer to have default/factory settings for my iPhone 4. Someone moved the brightness slider and I would like to change it back. A screenshot would be rather preferred.

Just set it to a level that is comfortable for you. Why does it matter if it is the "default" position?

Unable to restore to default factory setting

Hi,
I have Lenovo G550 Model name 2958 and with windows vista home basic.
When I am starting my Windows I am getting the small bar having the statement
"Win32 Guided Tour Applic...."
and after clicking on the small bar I am getting the light blue Page in Hindi(translated in English)
"There is some issue in Plugin which is 0x3BC3 and Please follow the below steps.
1.Call on the below number:
002612002210324
0022720122377
0022590409533
0023222274814
0037190100547
00261221000181
00263778289401
00263778289404
2.Please wait for the answer and put the key below in the box.
3.Put the key after getting from the above calling numbers and click on next."
I put the key "754-896-324-589-742" which I got from
http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/system-process-at-address-0x3bc3-...
After logging into Windows properly and try to restore the default factory settings by pressing the lenovo onekey recovery button it is not working then I have uninstalled it and downloaded the same version from the lenovo drivers site,but at the last moment of the installation of it i used to get "onekey recovery has stopped working"
Also sometimes earlier i have faced the issues while working used to get Dark blue screen with some text written on it and need to restart the system one more time.
Please suggest me the solutions for the above issues as i want to restore my laptop with default factory settings and want to eradicate all the above issues.
Please provide the solution for the same ASAP as it creating problem for me.
Regards,
Vaibhav

Hi,
I have tried to press the button when the laptop is turned off and during that time it is opening the windows in the same way as it opening in the normal manner.

I've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

Typos mad = and
Receive = retrieve

Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the

Hello! Just connected a used iPhone to iTunes for the first time. I'm trying to restore it to factory settings/default. The phone is connected via Wi-Fi and is updated to the most recent OS that the phone allows. The computer is also connected to the internet. But I still get the error: "itunes could not contact the iphone software update server because you are not connected to the internet." I also connected via iTunes and authorized the computer, but still have the same issue. Really, all I need to do is completely wipe the phone and start from scratch for safety's sake.
Help?

Did you check your security software settings?
Third-party security software might conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that might be caused by your security software.

What is the default restrictions code win restoring factory settings on an iPhone 3gs

I am trying to restore the factory settings to I can give the phone to a family member, but when I try it is asking for a restrictions pass code.
I don't ever remember setting one.
Is there a default one that I need to enter?
What is it?

Try 0000
I never set either passcode but Restrictions required one to get in so I tried a typical passcode that I might have used. It didn't work so I tried 0000 and it worked.

What is the default password in iphone4 for restoring factory settings

how can i reset my iphone4..... can i know the default password in iphone4 for restoring factory settings

kiran666, iOS devices will ask for a password if either you have set a screen-lock password OR you or your parents have set a restriction password. If you cannot get this password, and you have "find my iphone" turned on, use the "whip" option. It will reset to it's factory settings. If you do not, I suggest you do what KiltedTim suggested and put your iPhone in DFU mode or restore mode by simply holding home and power until the restore icon appears on the phone and restore using iTunes.

I was asked to update my iphone but then got an error message (6) saying I had to go to itunes which says I have to restore my iphone and default to factory settings. All that I am getting on the screen is a sign to plug in to itunes. I am VERY unhappy

It was working fine until I tried to update the software as requested. Help! I do not want to go to factory settings and lose everything. Can I uninstall the update somehow? Please respond asap

If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios.

Vista will not boot/install after performing a restore to factory settings on satellite l305

I have a satellite l305 that i bought new thru walmart.com about a year & a half ago, and for the past few months it seems like there are more & more issues with this pc that are causing it not to work properly-everything from drivers failing-or even disappearing, in some cases-to crashing into a blue screen everytime i insert a micro sd card into the slot.. My sound drivers are gone & even after i THOUGHT i downloaded them again, they still won't install or even recognize that they are there and then yesterday it suddenly stopped being able to fully load some of my fave games that i play daily.. I have tried EVERY SINGLE SUGGESTION in EVERY article, forum, help site, etc.,that i could find & even tried to get help over the phone from a pc tech here locally, and nothing has been able to fix my issues. I have done so many system restores from so many different restore points, installed updates, uninstalled updates, tried to install new drivers, rolled back drivers, started in safe mode to do diagnostics checks, entered BIOS & checked EVERY setting, reset all settings to default, checked error logs, etc., etc., etc...I have even completely disassembled my entire laptop & checked all wiring, fuses, etc., made sure everything was working, etc., So, finally yesterday I decided that it's gotta be something to do with a tech issue-probably with my vista home premium OS that came pre-installed at purchase, so i thought it best to just go ahead & go into the back up & restore & back up all my files onto an external hd using the file transfer wizard option inside the restore center, and then proceed into restoring the pc to it's factory, or "out of box", state. And i assumed i covered my bases by saving the back up-just in case...ohhh no-not the case at all!
It did't even occur tp me to that i might need an actual BOOT disk for vista after the fact. I just assumed that "out of box" meant just how it originally came-WITH vista pre-installed & ready to set up-like it did the day i bought it! i also was under the assumption that, isnce it never asked for a product key or anyting to activate vista then, that it wouldn't need one now either. But anyway, so this is where i'm at now-after i did the factory restore & turned it back on, it said to wait while windows finishes installing-but it never finished, then finally about an hour later, it said that windows was unexpectedly interrupted during installation & did not complete, and for me to restart pc to try install again. But after i did that, it was the same thing over & over. it NEVER installs!
So then i decided to go ahead & "restore windows using back up image" that i created on my external hd prior to the factory restore, thinking that it would just kinda pu **bleep** all back, but thats not working either. it recognizes the drive, and takes me to a menu where i can actually even view all the files on the drive and even tho they are known by my pc to be back up files, it still won't associate them to being back up files to MY PC!! I even got desperate enough to find a site that claimed to offer a free vista boot disk in the form of an iso image that i burned onto cd & tried to boot from as well. That actually took me to an install screen for windows & all the way to where it asks for product key-which DID NOT come locatedon any sticker anywhere on my laptop, and because they DID NOT include any OS utility, install, or boot disks with the purchase of my laptop, i don't know what the product key is OR where else i might be able to find that info, and i WILL NOT pay for ANOTHER ONE, just because they were too lazy or cheap to send the disks with the pc! so i tried to skip this step till later, but when i skip it, it shows anpther error saying that install was terminated & could not finish install & if i wish to continue, for me to restart my pc & re-attempt install..WHAT IS GOING NE WITH THIS AND WHAT CAN I POSSIBLY DO TO JUST BE ABLE TO USE MY LAPTOP AGAIN?? HELP ME PLEASE SOMEONE!!

Hi,
I do not really understand... Did you made a backup before restore to factory settings? And did you copy all backup files to an external device? If not, the data is gone!
Why? Restoryng to factory does not mean a reinstallation. It means to fill the whole harddisk with an image of the first (factory) installation. All other data will be destroyd! Other partitions are deleted and normally you find only one big partition - the whole hdd.
If you have a complete backup on external drive and it is corrupted during restore, try to open the files manually. Maybe you can restore some single files.
Good luck
kind regards
Stefan

How do I restore my mac to it's Factory settings w/o Disk Utility?

Hello Everybody. I had some trouble with not being able to start my Macbook Pro.
So I decided to just restore it to its default settings. I then erased the disk using the Utility Panel, and then pressed reinstall OS X Lion on the Macintosh HD.
It then dowloaded the needed files and started downloading.
When it was done, it started installing, but is stuck at the very beginning, then it gave me an error message saying it cant complete the installation beacause it can't create the recovery.
Then i started looking for a solution for this, and found that I had to remove my Bootcamp. Now, when I restart the mac and CMD+R, it says fail..
If I start it and hold the Option key down, it only shows my bootcamp and the installer for OS X Lion...
So how do I now restore my Mac to its Factory Settings.
Am quite francly clueless right now.
Hope you can help!!

Well, I don't know if your model supports full Internet Recovery. You can try the following, but if you get an error it means your computer isn't able to use full Internet Recovery in which case you need to buy Snow Leopard or replacement discs for the computer:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
Install Mavericks, Lion, or Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Download and install an updated EFI Firmware ROM for these computers to use the OS X Internet Recovery feature:
MacBook Pro (13-inch, Early 2011)
MacBook Pro (15-inch, Early 2011)
MacBook Pro (17-inch, Early 2011)
iMac (21.5-inch, Mid 2011)
iMac (27-inch, Mid 2011)
MacBook (13-inch, Mid 2010)
MacBook Pro (13-inch, Mid 2010)
Mac mini (Mid 2010)
MacBook Pro (15-inch and 17-inch, Mid 2010)
iMac (21.5-inch and 27-inch, Mid 2010)
MacBook Air (11-inch and 13-inch, Late 2010)
If your computer is older than these, then you cannot do an Internet Recovery.

Default Factory Settings??

Similar Messages

Maybe you are looking for