Default file share question

I have a mac mini server and I am not very experienced.
I think I screwed up the permissions and configuration of the default shares: Backups, Groups, Public and Users.
Can anybody tell me what the defaults are?
Regards,

Hi
There is no default 'Backups' share. You must have created this yourself? By default there has only ever been three shares going back to at least 10.3. These are Public, Groups and Users. There are only ever POSIX permissions applied by default to these shares and any other share you create using Server Admin. The Owner is root (read/write), The Group is staff or wheel (read only) and Others/Everyone (read only). If you decide to share folders created using the Finder the same 'rules' apply except the default Owner becomes whatever you used as the name for the initial administrator user.
If you're using Server Preferences (you really should try to move away from using this) the above advice should still apply. As ever poorly configured DNS Services will have a fundamental bearing on how well your Server works. Don't confuse a privately run DNS Service with what's available publicly.
HTH?
Tony

Similar Messages

How-to hide the portal file shares on Windows

Hi,
Does anybody know how to hide the default file shares created by SAP NW 04 in windows?
In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$.
I know how to do the Windows part, but where and how do I configure the SAP Web AS part?
Regards,
Steven Dijkman

Hi guys,
Thanks for all the feedback. However, this still does not fully work.
I tried hiding the folder but it in fact only hides the folder, not the share itself. I'm trying to do the opposite, hiding the share (making it an administrative one) whilst not hiding the folder. With the folder hidden, the startup framework (NW 04 EP6 SP12) does not work.
By the way: checking / tightening access is not an option: security architects dictate what needs to happen here and unless I have VERY good reasons I should comply to what they say: change saploc to saploc$ and change sapmnt to sapmnt$.
If anybody has anymore thoughts, I'd be very interested.
Cheers,
Steven Dijkman

Setting project default file locations and a few random interface questions

I apologize for the randomness of this post, but it seemed better than spamming a bunch of different posts in a short period of time. I've been using Premiere Elements 9 for about 6 months now and there are a few little things that I'd like to tweak.
I'd like to change the default file save location for a project. I've got different projects in different folders and it seems like I should be able to set a default save location for each project. All I've ever been able to find in the help is how to set the scratch folder, which is different.
I'd like to change the default encoding preset for a project. For example, I have a custom preset for mp4 under the mobile phone category. It would be nice to have that be the default whenever I pick the mobile phone category.
With birthdays and concerts and plays and all that stuff I have about 50 videos and a couple hundred large photos already. Every time Premiere loads, it takes a few extra seconds to load up all of the thumbnails. I hide all the videos and pictures on the Organize tab and save the project, but it never sticks. Is this just impossible?
Finally, every so often, the end-of-clip marker acts funny. I don't know what the proper name for it is, but it is the thing under the mouse cursor in the picture below. It used to automatically move on the time line as I added or deleted clips. Somehow I clicked a button and it no longer does that. After a week or so of not working, it goes back to automatically adjusting as I add and delete clips from the timeline and then it will break again. Ideas?
Also in the timeline, I now have this huge gap of nothingness on top of video 1, see picture. My ocd says that Video1 and Audio 1 should be at the very top and the gap should be on the bottom. Ideas?
Thanks,
Bob

I kind of wish you'd have spread these questions out over a couple of posts so that we could answer each thoroughly. If I answer all of them in depth in a single post, this answer would be the size of one of my books! (which, by the way, contain many of the answers to these questions.)
1. The default save location for your videos should be the last place you've saved your video to. So that should happen automatically. Although in my books I recommend that, whenever you start a new project, you create a new folder for it. This is good housekeeping and a good way to keep your tmp and render files in the same place on your drive, which has a number of advantages.
2. You can't create a custom project preset. The only presets available are the ones Adobe provides. And, although they are pretty extensive, some non-traditional formats (like video from some mobile phones) are not well supported. You may be able to get it to work -- but it's usually a hybrid solution and, personally, if you plan to use your phone's video as your main video source, I'd recommend you look at another video editing program. Premiere Elements doesn't do the hybrid stuff well. It's ideally suited for video from traditional camcorders.
3. The thumbnails you see when the program loads are not in your current project. At least not until you import them into your Project panel. That Media panel is merely a preview to what's in your Organizer catalog. As I explain in my book, it's usually best to ignore this panel until you really learn your way around the basics of this program. It's very confusing. Fortunately, it adds very little load time to the program itself -- regardless of how much time it seems to add.
4. The thing in the illustration is the Work Area Bar. It's used to isolate a segment of your timeline for rendering, etc. Usually, it will shrink and grow as you add and remove video from your timeline. Unfortunately, there's a bug in version 9 and, if you manually change it once during a project, you'll have to manually change it for the rest of the time you work on the project. But, if you drag each end of the Work Area Bar to cover your entire timeline of videos, your project shouldn't misbehave.
5. The "gap of nothingness" on your timeline is just room for you to add more audio and video tracks if you'd like to. It's a good thing to have! BTW, as I'm sure you know (and my books, once again, explain) you can toggle the tracks on your timeline so that they display as either compressed (as in your illustration) or wide open, which allows you to see your clips and control audio and video levels. Once again, this is a very good thing!
Happy moviemaking.

Default File system Authorization

Dear all
I have a question regarding the file systems Authorization
By default File system are created with authorization as follow :
                 - Everyone RX (this folder only)
                 - Users (3 sets of permissions)
                 - CREATOR OWNER F - subfolder and files only
                 - SYSTEM F (all files and folders)
                 - Adminsitrators F (all files and folders)
In fact what I do not like about this is that in the "user group" of the machine is populated "Authenticated Users"
So my collegues non IT, create share on these machines leaving the inheritance and then the whole company have access to thoses files.
Iwas wondering what would be the impact of removing the entries for users, creator owner, everyone and system
would that lead for issues for application to run?
Why keeping such wide permission on sever by default instead of closing the permission and granting access to people that need it ?
Thanks for your help
Bruno

Hi Bruno,
I understand your concern. However, the default permission set is the result after balancing security and usability. If user groups like authenticated users are removed by default, it would break things for sure.
Regarding critical servers like Domain Controllers and file servers, we should keep them in a secure environment and only grant physical access to qualified administrators.
Here are a few threads for your references:
Why is "Authenticated Users" in the local Users group by default?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bb74fa7c-89bd-476d-88bf-e88cd66618e6/why-is-authenticated-users-in-the-local-users-group-by-default?forum=winserversecurity
Risk of removing NT authority\authenticated users (S-1-5-11) from group "USERS"
http://social.technet.microsoft.com/Forums/en-US/681831a3-7fdc-493c-9cd8-378806733889/risk-of-removing-nt-authorityauthenticated-users-s1511-from-group-users
What is the best method to remove the Authenticated users group from all windows 7 workstations?
http://social.technet.microsoft.com/Forums/windows/en-US/b6794a96-fa6d-43df-8708-92aa4ccb3d8f/what-is-the-best-method-to-remove-the-authenticated-users-group-from-all-windows-7-workstations?forum=w7itprosecurity
Errors after removing Authenticated User in C drive
http://social.technet.microsoft.com/Forums/en-US/e47896d7-21dd-4924-b96c-0aa70b99bcf5/errors-after-removing-authenticated-user-in-c-drive?forum=w8itprosecurity
Best Regards,
Amy

Send to File Share issues

Has anyone successfully gotten the send to file share option to work correctly. Ideally I would like to have some podcasts output to some windows smb shares that we have available on campus. I've mapped these drives on the SL PcP2 server, but no file ever gets written. The farthest I've gotten is that PcP2 will write the day folder in the share but never any of the content. Any ideas?

Tatas,
I have not experienced this problem. This does sound like a permission error to me. Does your Podcast administrator have write permissions for the folder in question? Additionally with SMB, I seem to recall that permissions do not propagate by default. Check that out, also.
Finally, each job will create a diagnostic file that has information about the job; perhaps there will be some clues in it. The diagnostic files are located in /Library/Logs/pcastserverd/DiagnosticReports/ .
Hope this helps,
Stephen

Changing the default file manager in XFCE

How would I go about using Nautilus as the default file manager in XFCE instead of Thunar? I know it can be started up with 'nautilus --no-desktop', but how do I make this the default when opening folders from the desktop, menus, etc..?
The main reason I want to do this is because Thunar doesn't seem to remember a folders last setting. For example, there are folders which I would like to permanently view as a list, sorted by date; but there are plenty of other folders where this is not suitable. Nautilus remembers settings for each folder, Thunar doesn't, and it gets annoying changing the view mode each time. Also network browsing is easier in Nautilus, and I also like the way it tells you how fast file transfers are going.
Thanks very much,

Well, it might be considered a dirty hack but it has worked for me in gnome before so it should also work in xfce. Just edit the thunar.desktop file in /usr/share/applications and replace the Exec=thunar to Exec=nautilus --no-desktop and save the file. Then any time thunar is launched, nautilus will be launched instead.
Otherwise, you can edit the menu with the menu editor and change the File manager command and do the same in the panel icon properties. Both methods will work.

How can I map a drive to Azue file shares without user intervention or having a user logged on?

I have the file share created, and can manually map the drive. I have even created a batch file that will create the drive mapping. One step further, I used the following regedit to create the mapped drive:
Regedit:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
add new string value:
value name: MapS
value data: c:\azurefileshare.bat
I have a scheduled task running a batch file running the net use command, and the drive is available, and I can create/delete files, so access is not an issue.
All works fine if I log onto the server, however, what I am trying to accomplish, is to have that drive mapped upon reboot without having a user log on.   Checking the log file running the net use command when no one is logged on, I get the following:
Status       Local     Remote                    Network
Unavailable S:        path of file share
Microsoft Windows Network
The command completed successfully.
New connections will be remembered.
Is there a way to accomplish this? Thanks in advance.

Hello wdick,
Thank you for your response and getting back on this issue. I am sorry that the blog that I referred to was not available. I pretty much thought that you must be referring to the ‘File Services’ which is in preview yet. I recently had another user with a similar
question but currently, the users can access the files using only 'Interactive logon'. You can refer to this link:
http://social.msdn.microsoft.com/Forums/en-US/1f1fa9b5-a81d-4067-9d90-2c7c47667732/azure-file-services-authentication-without-prompt-passthrough?forum=windowsazuredata
Thanks.
Syed Irfan Hussain

How can I set a default file for JFileChooser

Hi. I am developing a p2p chat application and I have to unrelated questions.
1. How can I set a default file name for JFileChooser, to save a completly new file?
2. I have a JTextArea that I append recieved messages. But when a message is appended, the whole desktop screen refreshes. How can I prevent that?
Hope I was clear. Thanks in advance.

Thank you for the first answer, it solved my problem. Here is the code for 2nd question, I've trimmed it a lot, hope I didn't cut off any critical code
public class ConversationWindow extends JFrame implements KeyListener,MessageArrivedListener,ActionListener,IOnlineUsrComp{
     private TextArea incomingArea;
     private Conversation conversation;
     private JTextField outgoingField;
     private JScrollPane incomingTextScroller;
     private String userName;
     private JButton inviteButton;
     private JButton sendFileButton;
     private JFileChooser fileChooser;
     private FontMetrics fontMetrics;
     private HashMap<String, String> onlineUserMap;
     public void MessageArrived(MessageArrivedEvent e) {
          showMessage(e.getArrivedMessage());
     public ConversationWindow(Conversation conversation)
          this.conversation=conversation;
          userName=User.getInstance().getUserName();
          sendFileButton=new JButton("Dosya G�nder");
          sendFileButton.addActionListener(this);
          inviteButton=new JButton("Davet et");
          inviteButton.addActionListener(this);
          incomingArea=new TextArea();
          incomingArea.setEditable(false);
          incomingArea.setFont(new Font("Verdana",Font.PLAIN,12));
          fontMetrics =incomingArea.getFontMetrics(incomingArea.getFont());
          incomingArea.setPreferredSize(new Dimension(300,300));
          outgoingField=new JTextField();
          outgoingField.addKeyListener(this);
          incomingTextScroller=new JScrollPane(incomingArea);
          JPanel panel=new JPanel();
          panel.setLayout(new BoxLayout(panel,BoxLayout.PAGE_AXIS));
          panel.add(inviteButton);
          panel.add(sendFileButton);
          panel.add(incomingTextScroller);
          panel.add(outgoingField);
          add(panel);
          pack();
          setTitle("Kişiler:");
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          setLocationRelativeTo(null);
          addWindowListener(new CloseAdapter());
     //Sends the message to other end
     public void keyPressed(KeyEvent e) {
          if(e.getKeyCode()==KeyEvent.VK_ENTER && e.getSource()==outgoingField)
               String message=outgoingField.getText();
               if(message.equals("")) return;
               showMessage(userName+": "+message);
               conversation.sendMessages(userName+": "+message);
               outgoingField.setText("");
     //Displays the recieved message
     public void showMessage(String message)
          if(fontMetrics.stringWidth(message)>incomingArea.getWidth())
               int mid=message.length()/2;
               StringBuilder sbld=new StringBuilder(message);
               for(;mid<message.length();mid++)
                    if(message.charAt(mid)==' ')
                         sbld.setCharAt(mid, '\n');
                         message=sbld.toString();
                         break;
          incomingArea.append("\n"+message);
}

Error while adding file share for File Server role

I'm getting this error when trying to add a file share on a Server 2012 R2 failover cluster:
"Unable to retrieve all data needed to run the wizard. Error details: Cannot retrieve information from server. Error occurred during enumeration of SMB shares: WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote comptuers within the same
local subnet."
Despite the message, I can still create the share and it seems to work, but I'm concerned there may be an issue and I'd like to resolve it before putting the service into production. TIA!

Hi,
Your error often caused by the WinRM can’t communication to the others node, please confirm all the node “Windows Remote Management” service is running or try to disable your
firewall and AV soft then monitor it again.
More information:
WinRM (Windows Remote Management) Troubleshooting
http://blogs.technet.com/b/jonjor/archive/2009/01/09/winrm-windows-remote-management-troubleshooting.aspx
WINRM
http://blogs.msdn.com/b/powershell/archive/2007/10/30/winrm-exe.aspx
Installation and Configuration for Windows Remote Management
http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to set the default file name for upload

Hi All,
I have the following BSP app for a file upload of a csv file. I want the page when displayed show the default file name to be loaded as c:\db1\currentPM.csv
What changes do I need to make to get the default file name in the BSP app.
Thanks
Karen
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content id               = "content"
               design           = "classicdesign2002design2003"
               controlRendering = "sap"
               rtlAutoSwitch    = "true" >
<htmlb:page title="File Upload " >
    <htmlb:form method       = "post"
                encodingType = "multipart/form-data">
          <htmlb:textView text   = "File:"
                          design = "STANDARD" />
          <htmlb:fileUpload id          = "uploadID"
                            onUpload    = "UploadFile"
                            upload_text ="Upload"/>
    </htmlb:form>
</htmlb:page>
</htmlb:content>
On Input Processing
event handler for checking and processing user input and
for defining navigation
DATA: EVENT TYPE REF TO IF_HTMLB_DATA,
      DATA TYPE REF TO CL_HTMLB_FILEUPLOAD,
      LV_OUTPUT_LENGTH TYPE I,
      LV_TEXT_BUFFER TYPE STRING,
      FILE_NAME TYPE STRING,
      FILE_PATH TYPE STRING ,
      INTERN TYPE TABLE OF ZALSMEX_TABLINE.
DATA: LT_BINARY_TAB TYPE TABLE OF SDOKCNTBIN .
TYPES: BEGIN OF TY_TAB,
       FIELD1(2) TYPE C,
       FIELD2(2) TYPE C,
       FIELD3(2) TYPE C,
       FIELD4(2) TYPE C,
       FIELD5(2) TYPE C,
       END OF TY_TAB.
DATA: WA_TAB TYPE TY_TAB,
       IT_TAB TYPE TABLE OF TY_TAB.
TYPES: BEGIN OF TY_LINE,
          LINE(255) TYPE C,
       END OF TY_LINE.
DATA: WA_LINE TYPE TY_LINE,
       IT_LINE TYPE TABLE OF TY_LINE.
EVENT = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
IF EVENT IS NOT INITIAL AND EVENT->EVENT_NAME = HTMLB_EVENTS=>FILEUPLOAD.
DATA ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST = RUNTIME->SERVER->REQUEST NAME = 'fileUpload' ID = 'uploadID' ).
FILE_NAME = DATA->FILE_NAME.
FILE_PATH = FILE_NAME.
IF DATA IS NOT INITIAL.
    CALL FUNCTION'SCMS_XSTRING_TO_BINARY'
     EXPORTING BUFFER = DATA->FILE_CONTENT
     IMPORTING OUTPUT_LENGTH = LV_OUTPUT_LENGTH
     TABLES BINARY_TAB = LT_BINARY_TAB .
    CALL FUNCTION'SCMS_BINARY_TO_STRING'
    EXPORTING INPUT_LENGTH = LV_OUTPUT_LENGTH
     IMPORTING TEXT_BUFFER = LV_TEXT_BUFFER
     TABLES
     BINARY_TAB = LT_BINARY_TAB.
    IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    SPLIT LV_TEXT_BUFFER AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE IT_LINE.
    IF SY-SUBRC = 0.
      LOOP AT IT_LINE INTO WA_LINE.
       SPLIT WA_LINE AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
        split wa_line at ','
        INTO WA_TAB-FIELD1 WA_TAB-FIELD2 WA_TAB-FIELD3 WA_TAB-FIELD4 WA_TAB-FIELD5.
        append wa_tab to it_tab.
      ENDLOOP.
    ENDIF.
ENDIF.
ENDIF.

Also, I missed another point.
In the folder c:\dbdata I have a number of CSV files on the user frontend. I would like the BSP application to get the list of files in the folder and process them one after the other. How can I get the list of files on the folder in the user PC and how to process them one after the other.
I want the form to display only the default folder and once I press on upload it must process all files and display the status of processing on the same page.
Please kindly share ideas how I can implement this app.
Thanks
Karen

How do I change the default file saving type

I have seen this question all over the web, but none of the answers I have found apply to my version of Photoshop (CS5).
I want to change the default file type when I save files. I don't want PSD or PDF, I want PNG.
I want to hit CTRL + SHIFT + S like normal, but I don't want to select PNG from the drop-down menu when I go to name my items.
I don't want to create an action for each file I work with - I want this to be a default setting change across all of photoshop on every file.
Any help? Adobe has been of zero assistance.

I have already tried the "Actions" method - which is glitchy in and of itself!
What I am doing is very simple - I am making photo slide shows. I create a new file that is 1920 x 1280 (the size of my display) and then I open 100+ images. I copy and paste each image into the 1920x1280 file so that all images display the same on my screen when I run the slides. I re-size and adjust the position of each image so it appears how I want.
So I copy and paste my first image into the 1920x1280 canvas and then hit F2 (the button I applied the save as PNG action to). It saves the file. Then I copy and paste another image into the file and hit F2. Rather than creating a new file (or even a copy) Photoshop writes over the last file I made. YAY! More wasted time!
It blows my mind that a function as simple as "Change default file type" is missing from such an expensive, accredited program. How can their software engineers overlook something that hundreds of other people (like me) have posted a need for online? Something so simple? Andy why is it my job now to learn how to do scripting for Photoshop to add in a feature that should be standard? Is that why I pay $50 a month for this software or why I bought CS5 outright for more than $1000?
So that's what I am trying to do - make a slide show where each image is exactly the same size. It seems the only option Adobe gives me is "WASTE MORE OF YOUR TIME"

Where is the file share located in itunes because i cant find it??

Where is file share located??

Still no answer to this important question, nearly a year after it was posted? WHERE IS THE REMOTE BUTTON that we are supposed to pair Remote app on the iPhone with? Here's what the help file says in French :
Jumeler Remote avec une bibliothèque iTunes
1. Touchez Remote sur l’écran d’accueil de votre appareil.
2. Touchez Ajouter une bibliothèque iTunes.Un code à 4 chiffres apparaît.
3. Ouvrez iTunes sur votre ordinateur, puis cliquez sur le bouton Remote .
4. Tapez le code à 4 chiffres dans la fenêtre iTunes.iTunes jumelle la bibliothèque de votre ordinateur avec l’app Remote de votre appareil.
NO REMOTE BUTTON ANYWHERE IN ITUNES THAT I CAN SEE... HELP!

CS4 Set default file type when placing file

The File->Place dialog box has a default file type of 'Importable files.' Is it possible to set the default to All files (or anything else)? Making the change manually does not seem to stick. I have the same general question regarding File->Open. A search of the forums returned one hit (unanswered) in the Dreamweaver forum.
Thank you.
Dick Conrad

Peter:
Good question. One of our editors made this request, and I believe that he works with files that lack extensions. But controlling the default would also let us go in the other direction: quickly see only .rtf or .txt files, for example.
Any trick would be impractical if it lived in InDesign Defaults. All ID users get the same copy, and no two editors would want the same filter.
Thanks for your response.
Dick Conrad

Setting permissions in File shares content sources

Hello,
we want to crawl File Shares and set them available to searches. The set up of the crawler and the indexing is not a problem and works just fine.
The problem is that we would like to set the permissions on the results given from this content source and if possible to map the permission already on the files to the result scope. In simple words, only show the results (files) in which the AD User has
at least read privilege.
Is this possible? and if not which would be a solution of setting the permissions to this content source?
Thanx in advance!
Ioannis

That is the default behavior of SharePoint search. It will automatically read and use the file ACL.
One thing to note is that often users can see files but not read them on the file system, in which case they will be able to find the files in the search engine but not open them nor see within the files.

Is it possible to propose another default file name in ALV Excel Export?

Hello All,
I have a problem while exporting to Excel from the WD ALV. The whole process works fine, the problem occurs when the user wants to open (without saving) multiple exported Excel documents at the same time. In this case he gets an error message, that the document with the same name has already been opened.
Therefore I have a question, is it possible to customize default file name, so that instead of 'export.xlsx' the file name will contain e.g. WD title&time (or something like that)?
Thank you very much in advance.

Hi,
It's the standard functionality. You actually have to enhance the standard method, which is not advisable as the same will be called in other applications as well.
So, Instead of that, hide the standard Export functionality and create a new Tool bar button, say, 'Export to Excel' and in on action of that button, use cl_wd_runtime_services=>attach_file_to_response ( and pass the file name by concatenating date/time) method to open/save the file.
Check this document to create a custom button in ALV tool bar: Creating Self-Defined Functions in WDA ALV
And, check this blog by Chris for code reference to have Export to Excel functionality: Using WD ABAP ALV export - the hacked way
Hope this helps u,
Regards,
Kiran

Default file share question

Similar Messages

Maybe you are looking for