Default Folders Policy/Items retention period not respected ?

Hello, 
We have Exchange Server 2007 SP3 and we've set up a default folders policy to erase all mailbox content older than 31 days. 
However in three mailboxes we've sampled this policy isn't properly applied : the mailboxes had mails newer than 31 days deleted ( some 20 days, some 28 days, mine had only 14 days old mails !
Can you please explain to me why this is happening? 

Thank you sir Allen
I ran the commands you mentioned
[PS] C:\Documents and Settings\Administrateur>Get-Mailbox "alias" | FL Identit
y, ManagedFolderMailboxPolicy
Identity                   : domain.com/Users/alias 
ManagedFolderMailboxPolicy : TestPolicy
[PS] C:\Documents and Settings\Administrateur>Get-ManagedFolderMailboxPolicy "TestPolicy" | FL Identity,ManagedFolderLinks
Identity           : TestPolicy
ManagedFolderLinks : {Entire Mailbox, Tasks, Notes, Journal, Contacts, Calendar
[PS] C:\Documents and Settings\Administrateur>Get-ManagedContentSettings -FolderName "Entire Mailbox"
Name                      MessageClass              ManagedFolderName
testrem                   *                         Entire Mailbox
[PS] C:\Documents and Settings\Administrateur>Get-ManagedContentSettings -FolderName "Tasks"
Name                      MessageClass              ManagedFolderName
Preventing Del            IPM.Task*                 Tasks
I set the entire Mailbox to be deleted after 31 days, then creating managed content settings on tasks, agenda and contacts and uncheked the item retention period so that these items do not get deleted.
tried to go with only deleting items from the inbox but it didn't delete those in custom folders(each user creates his own)... the other method worked though

Similar Messages

  • Retention Period Not maintained Error when Archiving

    Dear Experts,
    i am trying to Archive the Archiving Object(MM_EKKO) but i have got the error below
    "Retention Period Not maintained" Error
    i tried to read different forums on this issue but am not sure i understand why this error happens.
    i appreciate your fast response!
    best regards

    Hai,
    In SPRO - IMG - MM - Purchasing - Define tolerance limit for archiving. In this maintain the residence time 1 & residence time 2 for the Purchasinh doc type & also with item category also.
    Define Tolerance Limit for Archiving
    In this step, you specify how long external purchasing documents are retained unchanged in the database before being archived.
    You can define two time periods, via which you control the archiving of the documents:
    Residence time 1 for items without a deletion indicator
    Before the deletion indicator is set for a document item, the system checks when the relevant item was last changed. In the process, a change in the PO quantity is taken into account in just the same way as a goods receipt, for example.
    The date of the last change is compared with the current date. If no change has been made within the residence time 1 entered , the deletion indicator is set for the item.
    Residence time 2 for items with a deletion indicator
    For document items for which the deletion indicator was set manually or during the archiving run, the system checks how many days have elapsed since the deletion indicator was set.
    The whole document is only archived if:
    The deletion indicator has been set for all items of the document
    None of the items have been changed during the residence time 2 entered - i.e. the last change is the setting of the deletion
    The archived documents are then deleted from the database.

  • Archive purchase document  log -  Retention period not maintained

    Hello Everybody,
       I have been trying to archive the Purchase document, I have also set the Retention period is 0 (Zero), but  when i archive the some Purchase document, it is give log like that
    Object                                                     Message
    4700000053 00010                                           Retention period not maintained
    4700000066 00010                                           Retention period not maintained
    4700000079 00010                                           Retention period not maintained
    So please suggest me how to solve the problem
    Thanks

    Solved, by archiving

  • Retention period not maintained

    Hi,
    When i'm doing data archiving for purchase orders,i got the message " Retention period is not maintained ".
    Please any one can tell where i have to maintain.

    Hai,
    In SPRO - IMG - MM - Purchasing - Define tolerance limit for archiving. In this maintain the residence time 1 & residence time 2 for the Purchasinh doc type & also with item category also.
    Define Tolerance Limit for Archiving
    In this step, you specify how long external purchasing documents are retained unchanged in the database before being archived.
    You can define two time periods, via which you control the archiving of the documents:
    Residence time 1 for items without a deletion indicator
    Before the deletion indicator is set for a document item, the system checks when the relevant item was last changed. In the process, a change in the PO quantity is taken into account in just the same way as a goods receipt, for example.
    The date of the last change is compared with the current date. If no change has been made within the residence time 1 entered , the deletion indicator is set for the item.
    Residence time 2 for items with a deletion indicator
    For document items for which the deletion indicator was set manually or during the archiving run, the system checks how many days have elapsed since the deletion indicator was set.
    The whole document is only archived if:
    The deletion indicator has been set for all items of the document
    None of the items have been changed during the residence time 2 entered - i.e. the last change is the setting of the deletion
    The archived documents are then deleted from the database.

  • Confused with default domain policy

    Hello I have a screensaver timeout policy that is enabled on the Default domain policy. It has a very short time value so that administrators lock out quickly
    however for general users in a different OU I created a new policy and enforced it which sets the timeout to be a bit longer.
    but for some reason the winning GPO is always the default domain policy. I looked at the default domain policy and it is not enforced so I am slightly confused why my enforced GPO lower down does not win .
    any idea?

    > but still I don't know what I can do to get it to apply the timeout
    > value overriding the default domain policy timeout value.
    First read through the links I provided.
    Then either link your "override" GPO to the computer OU and give domain
    computers read access, or disable loopback, or choose a totally
    different approach without using loopback:
    http://evilgpo.blogspot.de/2012/03/how-to-save-my-screen.html
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • New retention tag in default MRM policy (question/recommendations)

    Hi. I was asked by a user to setup a policy so that she could assign a policy that deletes any items older than 90 days.  She'd like the ability to assign this action to any folder in Outlook, both default (inbox, sent, etc), and personal folders she's
    created.
    So, what I did was to create a new tag, and then added it to the default MRM policy.  This is what the tag looks like:
    My question is, is this the "correct" way of doing this? Should I have created a whole new policy with just the one tag in it? Also, will she be able to apply it to any folder in Outlook, including the default ones?
    Thanks in advance!

    You've missed one 'catch':
    Users can apply archive policies to default folders, user-created folders or subfolders, and individual items. Users can apply a retention policy to user-created folders or subfolders and individual items (including subfolders and items in a default
    folder), but not to default folders.
    http://technet.microsoft.com/en-us/library/dd297955(v=exchg.150).aspx#RT
    Personal tag with Delete action will not work in this case, if she wants to apply it to all folders.

  • Custom Retention policies for default folders in Outlook

    Hello,
    The following are the steps I've taken to create a retention policy for a user.Exchange 2013, outlook 2013
    The problem is that even if I create a retention tag for a default folder, I cannot implement it. I've gotten retention tags for user created folders to work, but not the default folders.
    Login to microsoft 365 as exchange Administrator
    Click Admin > Exchange
    Click ‘Compliance Management’ on left side
    Click ‘Retention Tags’
    Create desired retention tag by folder (choose default folder or user created folder)
    Save each tag as it is created
    Click ‘Retention Policies’
    Click ‘New’ to create a new policy
    Add desired tags to policy and click save
    To apply Retention Policy click ‘Recipients’ on left side
    Click ‘mail boxes’
    12. 
    Select user and click edit > mailbox features
    13. 
     Select desired retention policy
    14. 
    Save
    Using this method I created a retention tag to delete mail in the junk mail folder after 14 days. I added the 14 day junk mail retention tag to a retention policy and applied
    it to a user. But whenever I look at the junk mail folder it shows that the email will be deleted in 30 days --- not 14.
    What am I doing wrong?

    Hi,
    We can try to use managed folders to specify retention settings for default folders such as Inbox, Deleted Items, and Sent Items. See:
    http://technet.microsoft.com/en-us/library/ee364744(v=exchg.141).aspx
    Also check this:
    http://blogs.technet.com/b/theexchangeguy/archive/2012/06/04/retention-polices-and-tags-101.aspx
    Since this question is more related to Exchange server, it's better to post your question to Exchange forum:
    http://social.technet.microsoft.com/Forums/en-US/category/exchangeserver/ 
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents,
    and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thank you for your understanding.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Pages: I want to reorganize items in folders, drag and drop is not working. So how can I do this?

    Pages: I want to reorganize items in folders, drag and drop is not working. So how can I do this?

    This is the very top of the documents view in the Pages app. If you don't see this, swipe down in this window to reveal the Date and Name tabs like you see here. If you tap on - Name - that arranges all of the documents in alphabetical order in this view and it also arranges documents in the respective folders alphabetically. If you tap on - Date - that will arrange all documents by the date that they were created or last edited. You want to make sure that you keep Name as the default at the top.
    Trust me, this does work. If you name the chapters alphabetically .... Chapter 1, Chapter 2, Chapter 3, or if you simply name them A, B, C, D, etc. they will be arranged in that order using the Name button at the top, which uses alphabetical order to arrange the documents.

  • ORA-01400 - not null column with default value and item with authorization

    I've searched - I would think someone has run into this. APEX 3.0.0.00.20 - I've created a simple form on a table. One of the column is a not null column with a default value. I have a select list on that item, but it has security on it - authorization scheme. So, it checks the user and if that user isn't of the right role, it will not even display that item. However, APEX appears to still send in the column in its sql! So, the default value is useless, it sends in null each time. Even if I set the default at the Item level, I get null. Argg. That's got to be a bug...
    In debug, I do not see the item listed at all. It's not used. That's fine - but why is it trying to insert the value? I would think it would leave it off??? I think because the item is associated with a database column. But, getting around this is ugly. Having to create a hidden item for each one, and then check to see if I need to take the list value... horrible. Any way to get around this???

    I should add - I guess I can always put my own custom process in to replace the DML. Just seems like a simple thing - if the value doesn't appear on the debug, isn't set with any default value... don't include it in the DML.

  • GL account given in Default Settings for Items is not taking precedence

    Hi All,
    Could you please give your valuable inputs for my query
    Which takes precedence....GL account given in Default Settings for Items at the top of the shop screen or the Product category and GL account assignment maintained in SRM GUI?
    Scenario: I input a GL account in 'Default Settings for Items' at the top of the shop screen. Then click on Describe Requirements. Here I change the Product Category and add the line item to shopping cart.
    What GL account will appear in the cost assignment? Default value maintained at the top or the value maintained in the Product category table.
    Thanks
    Deepthi....

    Hi Muthu,
    Thank you for your response.
    It is not picking the default G/L account assigned to cost center( I believe you are talking abt OKB9 trans). It is picking the G/L account which is assigned to the product category in the customising. This is happenning only if the product category is changed for the line item while adding the item to shopping cart. Otherwise the same G/L account given at the header is appearing in the line item too.
    Also While changing the G/L#  information in Default settings for items at top, if Cost center is also changed then the same cost center is appearing in the cost assignment section for the line item but not the G/L.
    Wanted to know if this is a standard design or not. I would like to have the header data to take precedence over the product category and G/L assignment. Any suggestions please
    No ..... I checked in csks table.There are many cost centers for the company code.
    Thanks
    Deepthi..

  • Default settings for items is not getting copied to items in Shopping Cart

    Hi SRM GURU's,
    I am facing a problme while creating shopping cart.
    I maintained default settings for items like Product catagory,Internal Notes etc.
    While adding items in shopping cart these default settings are not getting copied to any items.
    If anybody is having any clue Plz let me know I will award points for sure.
    Our integration testing is affected because of this issue.
    Thanks in Advance.
    Atulp
    +919822761641

    Dear Laurent,
    Yeah, this is a very strange issue and also a rare one. We have already tried this option. User deleted the cart and created a new cart. But still no luck. The new cart is also not getting released from SOCO. User created many carts previously for different product categories, vendors and all carts were through. But for this cart,it is not getting released. If you could have any other idea, you are most welcome.
    Anyway, thanks so much for your time and patience. Appreciate your help!!
    Regards,
    Aswini

  • IMAP Default Folders are "Not Yet Available"

    Ok, I have exausted all of my troubleshooting abilities (I even turned it off and back on!) 
    I have three IMAP email accounts hosted on a server at Site5.  I can login, get mail, send mail, etc.  But the "Default Folders" are listed as "Not yet available."  meaning I can't specify a sent folder, trash folder, etc.
    The odd thing is that the pre IS getting a folder list from the server.  On the main folder view, when I pull down the folder list for a specific account, I see ALL the folders, Inbox, Outbox, Drafts, Junk, Sent, Trash, etc.  It even syncs the contents.
    I have removed and re-added these accounts a number of times.  All with the same results.
    I have a friend that also has a pre and Site5 accts.  He CAN setup his IMAP default folders.  Everything I can see looks identical between his settings and mine.
    The Site5 server is running Courier IMAP if that helps any troubleshooting. When I telnet into the mail server I get:
    OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2008 Double Precision, Inc.  See COPYING for distribution information.
    Running WebOS Version 1.2.1  (Problem existed on 1.2.0)  I never tried on 1.1.
    I'm moderately computer literate, so if anyone wants to help me tackle this problem, I have no problem running some commands in a SSH terminal (on the Pre, or the server.)  But you might have to tell me specifically what to enter.
    thanks,
    Craig
    Post relates to: Pre p100eww (Sprint)

    Please direct any more comments on this issue to the thread linked above.  This will focus the discussion to one area.  
    Thread closed.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Default Domain Policy Not Applying Settings to Servers or Clients

    I have 2008 R2 DC's with a functioning level of 2003.  Our domain servers are a mix of 2003, 2008, 2008 R2, and 2012 and our clients are a mix of Windows 7 Pro and Windows 8.1 Pro.
    I recently made a change to the Default Domain Policy located at Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> Security Options
    For the Security Policy setting called: Network security: Configure encryption types allowed for Kerberos
    The change was to enable DES because of a specific need that I have with an application that I work with but enabling DES and leaving the other options such AES unselected caused other applications to not work right.  I decided to revert the changes
    back to "Not Defined" but those changes did not reflect on the servers even after running the gpupdate /force command.
    In order to keep the application working that broke, we enabled all of the encryption levels such as DES, AES, etc. on the server that's running the application via it's Local Security Policy as a temporary fix.
    Now, I want to make sure all servers receive the settings from the Default Domain Policy and have their Local Security Policies reflect the "Not Defined" setting but it's not applying.  It seems like they worked when I first applied them but
    when I try to remove them it does not work.
    If I change the setting directly on the Local Security Policy on the server or clients it shows "No minimum" instead of "Not Defined" which I've heard can be fixed by identifying the registry entry for that setting and deleting it...so
    help with the location and how to identify that key would also be helpful.
    My goal is not to manually have to change servers and clients to revert back to their default settings...I want the Domain policy to apply and override the servers and client's Local Security Policy.
    Any help with this would be greatly appreciated and thank you in advance.

    I have 2008 R2 DC's with a functioning level of 2003.  Our domain servers are a mix of 2003, 2008, 2008 R2, and 2012 and our clients are a mix of Windows 7 Pro and Windows 8.1 Pro.
    I recently made a change to the Default Domain Policy located at Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> Security Options
    For the Security Policy setting called: Network security: Configure encryption types allowed for Kerberos
    refer:
    http://technet.microsoft.com/en-us/library/jj852180(v=ws.10).aspx
    We needed to implement a similar scenario a few years ago (when we introduced Windows7 into our estate).
    We had an SAP/NetWeaver implementation which always worked on WinXP, but failed on Win7.
    We had to enable the DES ciphers, since those were disabled by default in Win7. We discovered that we also needed to enable all the other ciphers (those which are enabled by default[not configured]).
    i.e., when we changed the setting from "Not Configured", enabled DES, and left the RC4/AES stuff untouched by us, the RC4/AES stuff attracted a status of disabled.
    So, we had to set the DES ciphers to Enabled, and, also set the RC4/AES ciphers to Enabled - this gave us the "resultant" enablement of the default stuff and the needed change/addition of DES.
    When you set a GP setting "back to Not Configured", depending upon the setting *AND* the individual Windows feature itself - one of two things will happen:
    a) the feature will "revert" to default behaviour
    b) the feature will retain the current configured behaviour but becomes un-managed
    In classic Group Policy terms, condition (b) above is often referred to as "tattooing", i.e., the last GP setting remains in effect even though GPMC/RSOP/etc does not reveal that to be the case.
    (This is also a really good example of not doing this sort of stuff in the DDP. It could have borked your whole domain :)
    What I'd suggest, is that you re-enable your ciphers for KRB settings again - this time, enable all the ciphers that would normally be "default", let that replicate around, and allow time for domain members to action it.
    Then, set the setting back to Not Configured. This way, the "last" settings issued by GP will be those you want to remain as the "legacy".
    Note: the GP settings reference s/sheet, has this to say:
    Network security: Configure encryption types allowed for Kerberos
    This policy setting allows you to set the encryption types that Kerberos is allowed to use.
    If not selected, the encryption type will not be allowed. This setting may affect compatibility with client computers or services and applications. Multiple selections are permitted.
    This policy is supported on at least Windows 7 or Windows Server 2008 R2.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • SAP PI7.31 Java Single Stack  - Default Delete Job Retention period

    Hi
    anybody know where the Default Delete Job Retention periods can be set ?     I'm on a SAP PI7.31 Java Single Stack.

    thanks  - in milliseconds  - very precise.
    1) NWA-->Configuration-->Infrastructure -->Java System Properties
    2) Go to Services tab, and type XPI and select – XPI Adapter: XI
    3) Type “persist” in Properties filter
    4) for example Set Retention period in Milli seconds and save
    2592000000 = 30 Days

  • Microsoft Azure Backups not reducing available recovery points or destination usage after retention period has been reduced.

    Microsoft Azure Backups not reducing available recovery points or destination usage after retention period has been reduced.  
    I had the retention period set to 30 day with around 6.8TB of backups. Over a week ago I changed the retention period down to 7 days, and it took a couple of days for the total recovery points to go down to 7. The destination usage was still going up.   
    I have come in today (monday) and the total backups is now 10 and the destination usage is now 7.57TB.  
    I only have the one server backing up to Azure Backups Services.  
    My questions are;  
    1. how long does it take for azure to delete backups from outside the retention period*   
    2. why are there move recovery points that the retention period?  
    3. Is there a way to purge just the backups outside the retention period?  
    *It does say the backup agent, "space allocation data is updated on a daily basis".
    It would be a great help if anyone had some information on this as the storage costs are getting very high.
    Thanks for the help in advance
    Z  

    Hi,
    Any update for this issue?
    If issue still exists, please open a case from http://azure.microsoft.com/en-us/support/options/, pick Recovery Services & problem type as “Backup”.
    Also please let me know the case ID so I can forward it to related support team for monitoring. Thank you for your time.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Varchar2 in index vs. number

    My indexes on three primary tables total 80gb in space. They have 3-6 columns in the index, one of which is a 10-byte varchar field. This field holds an identifier type in character rather than numeric format. For example, name type is "INDIV" rather

  • ITunes not syncing apps after upgrading to ios 5 - Help :(

    I downloaded the firmware for ios 5 as it took 60 mins to download last night, and when it got to 10 mins, it errored. I backed up everything, and it gave me the option to restore backup once i had installed the new ios firmware. However, all it gave

  • Problems with itunes starting up

    I can start itunes but i can't do anything with it. it just sits there and does nothing whatsoever no error messages pop up  so i can't exactly judge whats wrong with it help me please.

  • Script needed for Flash 8 for initiating email

    I would appreciate greatly if someone could help me with script for Flash 8 for initiating email with Subject & Body Text - thanks in advance!!

  • [solved] KDE 4.4: Wallpapers not working.

    I just updated testing and it installed KDE 4.3.98, however now I cannot use wallpapers on my desktop, if I choose wallpaper in the desktop appearance window, there's no options to pick what image to display or anything, just the drop down telling th