Default formula in report painter

Hi,
We have added one total 'column formula' and one percentage 'line formula'
The problem is in the cell met by these two formulas. The system takes the column formula by default.
How can we modify this so that the system takes the line formula by default?
The total percentage is always the sum of all the percentages but not the percentage of the 'total column'
Thanks for your answers,
Best regards,
Laurent

Laurent,
I am struggling with the exactly the same issue. Did you manage to figure out a solution ?
Regards,
Peter

Similar Messages

New column with formula in Report Painter - GRR2

Hi gurus,
I want to insert a new element in my new report painter created by GRR2. I took a standard report and I copied the report. I know how to insert a new element.
The problem is I want to choose the value of a field in PROJ table for create a formula in my report. The users insert a value in user-define fields of CJ20n, and i would like to choose this value for create a formula in my report.
Can I create a formula to take this value from the table PROJ? If I need to create a characteristic for choose this field, as I can create?
Thanks.

Hi,
My question is:
Can i pick a value of a table (proj) for use in formula of report painter??
Many thanks.
Regards.

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

Conditional formula in report painter.

Hello.
I create new CO-PA report in KE31 transaction which is based on a form.
In transaction KE35 I define the new form and in this form I want to create formula.
This formula should be conditional. How to define conditional formula in that kind of form.
I can also define key figure scheme in transaction KER1 but in this transaction I also don't see possibility to define
conditional formula.
Conditional formula means that some value fields should be summ and some value fields should be substract
depending on the value of characteristics.
How to solve this problem in R/3 4.6C?
I am waiting for help.
Best regards
Bogdan

Hi,
I don't think that we can put the conditional formula. but we can do the calcualtion by row wise or column wise.
Thanks.

CO-PA column formula in report painter

Hi all,
Sorry about previously explanation!
In KE34, when define a form, we need several columns with a formula that is a combination between cells.
Rows:
- Row 1: Revenue (Y001)
- Row 2: Total cost (Y002)
- Row 3: Wages cost (Y003)
- Row 4: Depreciation cost (Y004)
- Row 5: ...
Columns:
- Column 1: Plan - value (X001)
- column 2: Plan - % (X002)= Cost / revenue * 100
for example: Cell Z001 (interaction between row 2 and column 2) = Y002/Y001 * 100%
Cell Z002 (interaction between row 3 and column 2) = Y003/Y001 * 100%
How I can set formula for column 2?
I tried to define formula for each cell in column 2. It worked, but it takes too much time cause the report includes 3 column like column 2; and about 20 rows -> 3*20 cells need to define for each report like this???
Is there any tool or formula variable i should use instead?
Thanks for any help
HuyenTT
Edited by: huyentt4 on May 17, 2010 11:22 AM

Hi,
there is no need to define the formula for each cell.
Mark cell 1/1 (Plan revenue) Have no other cells marked. --> this is cell Z001
Define column 2 formula as: Column 1 / cell Z001
The formular will for line X take the plan value from line X and divide it by the plan value from line 1.
I have lots of reports where I use this
Regards
Nikolas

Formulas in report painter - form

Hello,
does anyone know where I can add some formula components in KE35? I want to add some components to calculate new formulas.
thanks a lot!
David

Hi,
Good morning and greetings,
In KE35 click on Extras Menu > Report Parameters > Click on Display Form
For example in Net Revenue line double click to define the formula for the same.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Difficult report formula in report painter

Hi Gurus,
I would like to do the following:
I have 5 columns(X1-X5) and 5(Y1-Y5) rows. If I wanted column X2 in row Y2 to be the sum of X2 in row y3, how would I go about this.?. The issue is really about putting in a formula in different cells.
Any help would be appreciated
Regards

You need to use special cell processing. First select the cells. Then the selected cells will have a new variable starting with "Z".
Now use these selected cells to make your custom formule.

Report Painter - variables in formulas

Dear all,
we try to use value variables in formulas within Report Painter reports which should not influence the selection. Example: the benchmark of a daily rate is 975 - and the report should calculate the variance between the effective daily rate (total of service-provider costs divided by number of rendered hours divided by 8). The 975 should not be stored as a fixed value within the formula but should be defined as a value variable.
Ideally the value should be editable at the selection screen.
Has anybody an idea?
Thanks for your response.

Hi
I suspect you are not able to use the '& symbol in the formula in your system because the note 593897 was not present in old release.
Due to this note there is no need to enter '&' symbol for variables in the formula but in order for the variables to be used please make sure that the variable is contained in the general data selection of the report.
Kidn Regards
davide

How to apply condtion formula inside Report Writer and Report Painter

Hi anybody,
I am doing report painter. but i don't know how to include condition formula inside report painter or report writer. ex if condition ..
Anybody please explain to me the steps of report writer how do this.
I will appreciate goods answers to me.
thanks
Regards,
S.Muthu
Edited by: Subramaniyan Marimuthu on Jun 3, 2009 7:50 AM

www.virtuosollc.com/PDF/Get_Reporter.pdf
This is most useful PDF written by industry expert. This is more informative.
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
Regards,
Ravi

New variable in Report Painter - GRR2

Hi,
Can i create a variable with a value of table PROJ, the value is in Z field of table PROJ?
I need to create a formula in report painter to take the field value PROJ table and multiply by the actual costs.
Many thanks.
Regards.

Hi,
Easier option is to create a profit center group excluding the dummy profit center and assign it in the report painter instead of the variable.
Other option is at the time of executing the report, exclude the dummy profit center with out making any changes in the report.
Regards
Sudhakar Reddy

Formula line in Report painter

Hello,
Can I use 'IF' phrase in Formula column in Report painter ? If so what's the right Syntax .
Thank you,
Ran.

Hi Ran,
Glad to hear from you too!
Did you put '.' in the formula at the end of the message? You shouldn't in this kind of statement, so the expression should be:
IF X005 > 0 THEN X004 + X003 + X005 ELSE X004 + X003
Regards,
Eli
P.S. I tried it, just in case, and it works.

Report painter- problem in creating formula variable- ps

Hi Experts,
i have copied report 6P3 - 6PP1-001 Act/Com/Total/Plan from library in report painter.
our requirement is we want two user fields from cj20n in this report. they are prps-usr04
and prps-usr05.
i have added these in header as special text variable as they were ALREADY available at header under
MASTER DATA FOR PROJECTS / WBS ELEMENT IN REPORT-WRITER.
now my requirement is to add new columns. for that i required these two fields in formula.
but as they are not present in formula component i am not able to get it.
what should i do to enter these fields in component list in formula?
PLEASE GUIDE ME?
AMOL

ActRunningBal is a running total calculated in crystal or database field? If it is a database field then you can try this
if {command.CR-Amount} <>0 then
{command.CR-Amount}
else
previuous()+previous({command.Dr-Amount})
If it is a running total you cannot apply previous function on it.
Regards,
Raghavendra

Report painter - Default set 010100010001-1 does not exist

Dear Experts,
I have created a report in report painter and I transported (report, report group, variables) thru transport request. while importing into Quality system i was getting errror"Library 1VK: Default set 010100010001-1 does not exist". Then i kept 1 VK library in transport then i moved to Quality system now all standard report are not working properly.
Please advise.
Thanks
Balu

Hi Thanks for your reply
Earlier i was getting the following error when i was importing transpor request (report, report group, variables)
1)"Library 1VK: Default set 010100010001-1 does not exist. "
2)Errors occurred during post-handling G_RW_AFTER_IMPORT for GRW_JOB T
3)The errors affect the following componenets:
4)FI-SL-IS (Information System)
Then I transported 1VK library also (without selection list option) now my standard reports are not working properly
Please advise.
Thanks
Balu

Formula Variables for Report Painter

Dear Experts,
I have a Report Painter Report which displays month wise report in columns and now i want the report to be displayed based on the period mentioned in selection screen.
Can someone please advice how do I do the same with use of Formula Variables.
Regards,
Rahul

Go to the selection screen and press F1 and go to technical details to name the name of the screen field. example: 8A-VON (period from) and 8A-BIS (period to).
In your report designer, you enter the those variable for the "period" characteristic and tick the variable ON/OFF checkbox.

Report Painter - Use of Constants / Local Formula Variable

Hi,
I am using constant and/or local formula variable in report painter in FSI.
I could use both the values for calculating percentages, ie. it can be used for multiplication or division. However, when I try to use it for addition or subtraction, I am getting the error message no. KH206.
In all cases, I am using different values in the formula, i.e. a absolute figure and a GL based figure.
I am not able to understand, why it even allows me for calculating percentage.
Can anyone help me in using a absolute figure for input and thereafter use it in addition / subtraction.
I would prefer an immediate solution to this as I am in the final stages of this report.
Full points guaranteed.....

Hi Kash,
Thanks for your reply..
Can you elaborate bit further. You mean to say I should create a Constant with some value.
Thereafter how should I bring that in the form. But, How do I enter the Constant in the Formula... There is no key for entering any text in the formula.. there are only ID (the values which we bring in the form and which can be selected for the formula) and numbers which can be entered.
So how do I enter the name of the Constant?
I tried just keying in the name of the Constant, and I could check the formula also, However, while saving the form, I am getting an error,
Element WCaplimit Bis letztem ATag bis &$BISD is not defined correctly -> check definition
Message no. KH206
Diagnosis
In element WCaplimit Bis letztem ATag bis &$BISD the system adds quantities and values or different currencies.
Can you please revert back with step by step solution?
Appreciate your prompt reply.... Thanks

Default formula in report painter

Similar Messages

Maybe you are looking for