Default framework properties ( urgent )

Hi,
Unknowling i have turned off the visibility of 'com.sap.portal.innerpage'-(desktop innerpage) Iview in Default framework page.
After that i am not able to see anything even if logged in as a super admin ?
How to turn the visibility again ?
Pts assured.
RGds,
J

Hi,
You can run the PCD inspector and change an attribute there.
Run the inspector by entering the URL http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.portal.pcd.admintools.pcd_inspector!2fpcd_inspector
You will have to log in and accept the terms of the PCD inspector.
Navigate to the framework page, and then to the innerpage.
Change the innerpages attribute called com.sap.portal.iview.Availability and change it to MANDATORY.
I think this would be the easiest.
Hope this helps.
Daniel

Similar Messages

Default Framework page Isolation method changed

We changed the Isolation method to URL instead of embedded on all of the iviews in the Default Framework page.
Now we cannot view the Portal Content Directory. Is there any method to fix this by going to a URL.
We tried - http://myServer:50000/irj/portal?NavigationTarget=ROLES://portal_content/administrator/content_admin/worksets/com.sap.portal.content_admin_ws/com.sap.portal.content_admin_wsExplorer and it did not work.
Thanks in advance,
D. Maupin

Hi,
You can resolve by using the steps below:
1. Create a transport package for the Default framework page in a system where the properties are correct . Export the epa file and save locally
2. Login to the Portal where the properties have been messed up.
3. On the same Browser window change the URL to
http://<server>:<port>/irj/servlet/prt/portal/prtroot/com.sap.portal.pcd.admintools.import.default
This should open the Import Transport application
4. Import the local transport .
5. Logout and login again to the portal.
Thanks
Prashant

Acrobat 9 Text Box Default Text Properties

Acrobat 9: How do you change the default text properties for a text box?

I take it you are talking about the text box from the Comment and Markup Toolbar?
Yes, to access the Properties of a drawn box, select the box and right click(Control click on Mac) , a pop up menu will appear, choose > Properties... and amend as necessary. (Sounds like you probably knew that bit already).
When in the Properties dialog box you will see a check box at the bottom that says 'Make Properties Default'
Also an already modified box can be right clicked on the reveal 'Make Current Properties Default' from the pop up menu
Paul

Can't find tool area iview in default framework page

Hi,
I want configure tool area iview in default framework page to clp. i went through endusers -> standard portal users -> deafault framework page -> open -> edit ->
Here i have to see tools area iview apart from other iview, By default tools area iview is hidden. if i want to see and configure that(tools area iview) what i have to do. any one have solution.
Thanks,
Regards
Damodhar.

Hi Damodhar,
The Tool area iview has to be there in Default Frame work page. But if some how u lost that then one thing i can advice there is a par file in the server com.sap.portal.navigation.toolarea.par.bak,Go System Administration>> Support>>Portal Runtime>>Browse Deployment>>WEB-iNF>> Deployment>> pcd, import that into ur NWDS and delpoy it to the server. Make an iview based on it and put that iview in the frame work page in its postion.
http://help.sap.com/saphelp_nw04/helpdata/en/b4/771158e4cb4bf6af9974380948db86/frameset.htm
Check out the link also to get a better understanding abt the deafault frame work page.
Hope this Helps
gEorgE

Development problem about layout of default framework page

Hello experts,
I want to do some development for layout of default framework page.
The layout of default framework page named "framework page layout".
But I can't find the JSP file of "framework page layout".
I download and unzip the "com.sap.portal.layouts.default.par.bak" and "com.sap.portal.layouts.framework.par.bak", but both of them not contain the JSP file of "framework page layout".
Could you please tell me where to get the par or JSP file of "framework page layout"?
Best Rrgards,
Jianguo Chen

Hi Johan,
You are right !
Do you have modified the framework.jsp ? e.g: set the width to 800 .
<lyt:template>
<%
pageRunMode = epPageVariables.getRunMode();
if(pageRunMode == RunMode.RUN_TIME){
%>
    <script>
        document.body.style.margin=0;
        document.body.scroll = "no";
    </script>
<%}%>
    <hbj:content id="myContext" >
        <hbj:page title="Portal Page">
        <hbj:gridLayout   id="GridLayout1" width="800" cellSpacing="0">
            <lyt:container id="frameworkColumn" />
        </hbj:gridLayout>
        </hbj:page>
    </hbj:content>
</lyt:template>
Is this code right to change the with of frameworkpage to 800 pixels ?
Expect your responding
Best Regards,
Jianguo Chen

How to change default text properties and text box properties

I'm adding text to a PDF document by using the text box tool. The default is to put a border around the box and also the font is red and larger than I'd like. I think I found how to change the default box properties (so it has no boarder).
For the text/font, I can pull up a menu to change the font properties, but so far I'm having to do this for each box I create. One workaround is to cut and paste new text boxes with the formatting I want, but I still want to know how can I set the defaults to the font, size and color of text I want?
I'm using AA 8 Professional
Best, David

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

BUG? Default Project Properties, Business Components: Base Classes

Is it just me, or is there a bug in the Default Project Properties Dialog when attemptiong to specify custom classes for the Business Component Base Classes.
I have extended EntityCache and can successfully specify it as a base class via the Project Properties dialog, but in Default Project Properties, I get an error stating: "The selected class is not a valid superclass. Either is does not implement the interface oracle.jbo.server.EntityCache or it has an invalid modifier".
FYI: My custom library has been added to the Default Project Properties->Libraries.
Any help?

Does it work if you use the:
Tools | Preferences... | Business Components > Base Classes panel instead?

How to enable desktop innerpage in Default framework from the disabled EP

Hi,
By mistake I have disabled the desktop inner page in default framework - ep7.0. Now I am not able to see anything below the toplevel menu. I want to enable that again and i don't know how to do that. Because nothing is coming inside the screen after clinking the portal contant. That mean disabled. Is there any other way to get back that?
I don't know how to do that.
Thanks,
V P

Hi,
After getting into the portal i have entered the below url and changed back to the original.
http://server:port/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fcom.sap.portal.frameworkpage
Thanks,
VP

BPC7.5NW: How to increase default Dimension Properties length

Hi Experts,
May I know if it is possible to increase the maximum length of default dimension properties, such as ID and EvDescription? I know we can set the property length in "Modify Dimension Property". However, I don't see those default dimension properties under this functionality, in my case, the ID.
Please advice.
Regards,
Kenneth

Hi,
No! you can not change Ienghts of all properties. If the dimension is standard then you can not change any of the standard properties. If the dimension is user defined then you can not change ID,Description and Scaling.
Default length for ID is 20 chars and Description is 60 chars.
Regards,
Raju

Mass-Update Default Print Properties for Spool Authorization (S_SPO_ACT)

Dear Experts
To protect HR spool requests it is possible to use the print-authorization in combination with the authorization object S_SPO_ACT.
In case a HR user prints a form the the print-popup will default the user-parameter SAU for print-authorization. When printed like this the value of the SAU-parameter will be added to the spool request.
In case the HR user prints a ABAP-list the value of the user-parameter SAU is not defaulted in the print popup. Instead seperatly saved defaults print properties (see print popup -> properties) are taken.
How can I mass-change these default print properties? How can I set these default print properties for other users?
Thanks in advance

Please note that with SAP BASIS release later than 620, parameter id 'SAU' is either no longer used or only used in a limit fashion. The default spool authorization is now stored in cluster 'UV' instead of at 'USR05' / parid 'SAU' .
If your users already have 'SAU' parameter populated with proper spool authorization, SAP has an ABAP util 'RSTRANSPARAMSAU' to store this in the cluster. Once you run this util, default spool authorization will
be populated properly each time spool files are created.

Can I use the default "signature properties dialog" in DigSig layer?

Hello
I am writing a plug-in about digital signature with the DigSig Layer. I need a "signature properties dialog" to display info after I verified the signature.
Now my questions :
Can I use the default "signature properties dialog" in DigSig layer, just like PubSec's default "signature properties dialog" ?
If I want to implement my own "signature properties dialog", what should I do ?
thanks.

Thank you so much~
Actually, it's only an applet for test. I cannot get the error code if I new the KeyPair in install function or Applet construct function. It will return "6A 80" when install the applet.
And, I found that it support few algorithm. For example, it does not support ALG_DES_MAC4_ISO9797_M2,etc. Is there anything I can do if I want to use the algorithm? Shall I rewrite security package by myself?
5555, security package is the standard package in JAVACARD API 2.1.1.

EP6 SP2 Patch 4: Default Framework for innerpage corrupt

Hi,
we just installed Patch 4 and Hotfix 5 in a cluster environment on Unix. Everything went (almost) fine (eg. the SAPInst installer started the portal as user root which produced some error after our restart, but we could fix that).
The only "interesting" problem we had was, that the default framework for the portal (which is needed for the innerpage) was corrupt (or at least if we open this framework in the portal we can see only the narrow section of the framework -- and not the "narrow - wide" layout as it should be; the effect was, that all content of the innerpage was displayed in a very small area).
This was no real problem for us since we were already using a modified layout, but it still would be interesting to know if anybody else experienced this kind of behavior and perhaps knows a fix for that. I looked through the OSS notes, but couldn't find anything.
Best regards,
Holger.

Did you find a resolution for this behavior?
Michael

Why not include a default framework in Dreamweaver?

In Webphere 5.0 onwards you get struts framework as default
framework.
why not adobe include some framework default in DW or
CFEclipse.
Default framework wizard allow users not to struggle with
framework.

good idea, fusebox would be the obvious one to start
with

About Default Framework Desktop Inner Page refresh Problem

In the Default Framework's Destktop Inner Page's Detail Navigation , When I click a link , It's refresh whole Desktop Innerpage page.
Now I not require refresh whole Desktop innerpage . I'm only require it's refresh content page.
How solve this problem?
Thanks.

Hi Yanjun,
The behavior of a lot of features depends of the framework. Please check first the framework comparison document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3050a9ef-2848-2a10-1e93-bcc432c00c84
Also check isolation method of IViews, mainly URL isolation method (it may help you):
http://help.sap.com/saphelp_nw70/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/b5/8d977463334342be192228d2824fe1/content.htm
Reward points if itu2019s helpful.

Default framework page not opening

Hi Forum,
I am trying to login in portal with super admin role but after authentication I am getting this error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/every_user/general/com.sap.portal.frameworkpage/com.sap.portal.toolAreaiView
Component Name : com.sap.portal.navigation.toolarea.default
com/sap/ip/basecomps/consistency/ConsistencyDomain$Lockable.
Exception id: 03:11_14/03/07_0057_14617650
See the details for the exception ID in the log file
It seems that the default framework page is corrupted.
Can u pls suggest how should I proceed to recover thr portal framework page?
Any help is welcomed!
Regards,
Mickey.

Hi Mickey,
did you see this <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=2844054">thread</a>?
Best regards,
Martin

Default framework properties ( urgent )

Similar Messages

Maybe you are looking for