Default HTML Gallery: How to make Slider for 'thumb.width' & apply output sharpening on thumbnails

Hi,
I am in the process of teaching myself the LRWebengine by modifing the file 'galleryInfo.lrweb' which is default HTML Gallery.
I am intensively reading and using SDK 3.0.
Not sure whether I am asking in the right forum but give it a try anyway.
What I'd like to achive is to have a slider allowing to change the width of the thumbnails in the section for Grid Pages and later to apply output sharpening on thumbnails.
Currently the size for the thumbnails width & height is set to 130px (["photoSizes.thumb.height"] = 130)
There is no problem to change the size for all thumbnails manually by changing this and its associated values at lines 96, 110, 114, 134, 138 in galleryInfo.lrweb.
What I'd like to find out is the following:
- how to properly include a slider row in the section for 'Grid pages' (presumably right after line 358)
- how to create a variable (eg. $sliderThumbWidth) from the selected slider-value
- so that this variable can be used to replace the current preset values at lines (96, 110, 114, 134, 138)
- later and in addition, apply sharpening 'high' (level=3) on output for thumbnails
First I thought I'd be able to figure it out by myself, but after two days of fiddling it seems that I can't. I am stuck with the creation of the variable '$sliderThumbWidth' and assume that the new 'slider_row' is not coded properly.
Hope someone can give me hints and will help me out on this.
Thanks for your attention.

... have a slider allowing to change the width of the thumbnails in the section for Grid Pages ...
Got this one worked out alright. Yeah, thumbs can now be dynamically adjusted in the WEB-UI.
Remains the problem to find out how to apply output sharpening on thumbnails.
Has someone ideas how to achieve this?
Thanks for replies.
Message was edited by: snahphoto

Similar Messages

Hi all, how to make slide show on Iweb with out QuickTime?

Hi all, how to make slide show on Iweb (with out QuickTime or link to YouTube) to be watched in any computer/system?
I used Imove - share - exported - medium (m4v)
This the one I did.
http://360motorcycleadventures.com
Must looking profissional (no YouTube frame)
The problem is: I lot people don't have QuickTime, any body can point me the right direction?
Thanks' in Advance.

I use this slideshow often :
http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
See it here in an iWeb page :
http://www.wyodor.net/_Demo/MyHouse/Huis.html
These are the slideshows :
http://www.wyodor.net/_Demo/Gardens/flagstones.html
http://www.wyodor.net/_Demo/Gardens/gardens.html
And here in a non-iWeb page :
http://www.wyodor.net/htmlegg/SmallCard/SmallSlideshow.html
This is the slideshow itself :
http://www.wyodor.net/htmlegg/SmallCard/VintageParis/
Or use WOW slider :
http://www.wyodor.net/htmlegg/TallCard/TallWow.html
There are lots of slideshows out there. Choose the one you like.
And search/browse this forum for other solutions.

How to make slide images with Dreamweaver CS6?

How to make slide images with Dreamweaver CS6? Please teach me.

Hello
in addition to Jon's hint, I'll send you some links to nice sliders (have fun with the different representations ):
http://sandbox.scriptiny.com/javascript-slideshow/
http://jquery.malsup.com/cycle/
http://wowslider.com/best-jquery-slider-crystal-linear-demo.html
http://www.jcoverflip.com/demo
http://www.jacksasylum.eu/ContentFlow/
http://addyosmani.com/blog/jqueryuicoverflow/
You only need to use the source code to implant these shows there where you want. In my eyes it would be the best that you use first a very new and blank DW file to perform (maybe in LiveView) the one or the other.
Hans-Günter

How to make entry for transit loss in the system

Hello to all,
I am having an issue with one subCon material.
Suppose,
Material A is the product required of 3000 MT Qty.
SubCon vendor have sent that qty, but there is a transit loss of 500 MT.
How to make entry for this transit loss in the system.
regards,
Anisha

correct me if i am wrong-
ur scenario is
for making material A ,
3000 MT of material B required.
but for producing A vendor uses 3500MT of B
solution : if this ia the case then u can overwrite the value of B at GRN from 3000MT to 3500MT.
OR
ur scenario is -
u require material A of 3000MT
vendor sends u 3000MT
but actualy u recieve 2500MT
and u have to pay for 3000MT as per bill
solution : if this is ur scenario then.
prerequisite-activate direct posting to G/L and material at MIRO
Path - SPRO->MM->LIV->activate direct posting to G/L and material at MIRO.
now procedure is -
step 1) do GR for 2500MT
step2) in LIV pay to vendor for 3000MT for that put 500 qty in material tab and the relavent amount.
in this way loss in transite will be book on inventory.
regards,
sujit

How to make folders for pitcures on iphone 4

how to make folders for pitcures on iphone 4?

sorry about that..Where do i find the replies to my posts? tks

Example to demonstrate how to make rebate for business

Hello Gurus,
please give a example to demonstrate how to make rebate for business?
thanks very much!

hi
Rebates Processs in SAP is divided into three components
1) Configuring Rebates
2) Setting Up Rebates
3) Managing rebate agreeeements and payments
Pre-requsiistes- Check the following:
1.The payer partner needs toi have the rebate field checked in the customer master on the sales area-billing doc tab.
2.The Billing type must be marked as relevant for rebates.
3.The Sales Organisation must be marked as relevant for rebates.
Condition Technique :
Rebates, use the condition technique, but distinguish themselves from pricing in applying to transactions over time, versus on a transaction basis. Rebates have their wn field catalog and their own condition table naming convention.So you could have two condition table "001" one for pricing and one for rebates, which could have different key fields. You need to use the technical names A001 For pricing and KOTe001 for rebates when you use the query type using transaction SE 16..
Use create access sequence (AS). Enter 1 in field category for rebate specific. AS after going thru the right path of maintaining access sequence for rebates.
The big difference between the rebate and the pricing access sequence is that there is no exclsuion flag available for rebate related AS. This means multiple tables for an access sequence can be aplied at the same time.
Rebate related condition types are identified by codnition class -C.
After defining and creating condition types for rebated include them in the pricing proceedure. The requirement should be 24 here which implies that the accruals are calculated on the basis of invoice/bill.
The other fields- alctyp and altcbv does not allow you to manipulate how a rebate is calculated. Also, remove the requiremnt 24, if u want to see reabtes at order time.
Now payment of rebates:
Payments can be maunal or in full settlement. When you do manual payments, it defines how much can be paid out during a partial settlemetn. You use partial settlement only when rebate agreement is defined for a full year but the paoyouts are supposed to happen on a monthly, quarterly or anyother specified period.
These accurals are based on sales volume and when they are posted billing is created int eh follwoing manner. Provision for accruals is debited and Sales revenue is credited. When rebate credit memo is created
Customer account/ is debited and
Accrual provision account is credited.
Also, please note that when rebates are created without dependent ona material but on customer/material you need to refer to a material for settlement.
First of all rebates are more or less discounts which are offered to customers. The rebates are based on the volume of the business the customer does with you within a specified time. for eg if the customer agrees for Rs.1 Crore worth of business with u in 1 year, then you activate your rebate porocess. if at the end of the year the customer DOES achieve the target u offer him say 2/3/4 % whatever is decided. The rebates are passed on to the customer in the form of Credit notes.
The rebate can be given to the customer at one time or in installments also.
This is broadly the outline of the rebate process.
Note : I recomend you to study the theory part of why rebate and why not a discount.
This will help you understand better.
May be I can help you with rebate process.(IN -IMG)
1. define a rebate agreement type
2. define a condition type group
3. define a condition type and place this condition
Type in the pricing procedure.(REQUIREMENT=24)
ALSO IN THE PROCEDURE- ACCRUAL KEY = ERU
YOU ALSO HAVE TO DO THE ACCOUNT DETERMINATION FOR REBATES.
Once you have defined all the 3 and assignment starts.
Assign the agreement type to the condition type group
Assign the cond type group to the condition type.
Condition technique is also used in rebates.
REBATE ACTIVATION- IN CUSTOMER MASTER, SALES ORGANISATION AND FOR THE BILLING DOCUMENT.
After having done this please proceed to maintain the condition record for the rebates (transaction code-vbo1)
Note: if you maintain the requirement coloumn with the requirement as 24 - the rebate will be affected in the billing document and if you dont give the requirement as 24 your rebate will be affected in the sales order.
The rebate process is completed when you have created a credit memo to the customer.
The document type for the partial settlement is R3.
Please make sure you open two screens SO THAT YOU CAN COMPARE THE NEW ENTRIES WHAT EVER YOU'RE DEFINING WITH THAT OF THE STANDARDS or first you try with the standard condition type boo1, boo2
boo3 boo4.
AFTER YOU HAVE FINISHED A COMPLETE SALES CYCLE OF CREATION ORDER , DELIVERY AND BILLING.
GO TO THE CONDITION RECORD IN CHANGE MODE (VB02) AND SETTLE THE ACCOUNT PARTIALLY.
In a simple way,
1. First you need to create a Rebate agreement.
2. Create condition record for rebate giving the rebate rate and accrual rate.
3. when the rebate relevent billing doc is generated, the rebate and accruals are determined and posted in a seperate GL account as a noted item - amount to be settled. Also it gets copied in the rebate agreement.
4. create settlement run using credit memo request and then credit memo to settle this amount with the customer.

How to make password for macbook

how to make password for macbook

Go to System Preferences - Users and Groups, select your user, and click Change Password. If you currently have a blank password, type nothing in the "Current Password" box.
Matt

How to Make BDC for transcation KKS1

Hi dear,
can any one tell me that how to make BDC for KKS1.
because i have recorded the BDC and converted into the program logic than it is showing the first window but not showing the window with ALV and futher more. So what coding i have to apply.
Please help.
Siddarth Jain

Hi,
U can record the flow in using SHDB transaction recorder.
U can record and it will generate the program, u can copy and paste the part of the code that is generated, in ur ALV report. this will call the transaction.
Do as follows:
<b>SHDB > New Recording > Specify Recording Name YTEST > Transaction code KKS1 > STRAT RECORDING BUTTON></b>
then speciy the vales u want to give to run the transaction. U can save and come back as soon as u reach the screen when u want to stop it.
EG:
Declare a messtab
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata,
* Internal table to hold BDC messages
i_messtab TYPE STANDARD TABLE OF bdcmsgcoll
* Work area to hold bdcdata value
DATA: w_bdcdata TYPE bdcdata,
* Work area to hold BDC messages
w_messtab TYPE bdcmsgcoll.
CONSTANTS : c_e type bdcmsgcoll-msgtyp value 'E', "E
c_a type bdcmsgcoll-msgtyp value 'A', "A
nodata type c value '/'. "/
perform f1000_bdc_mm03 using lv_matnr lv_werks.
FORM f1000_bdc_mm03 USING P_LV_MATNR
P_LV_WERKS.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
p_lv_matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(15)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(15)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '0080'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-WERKS'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMG1-WERKS'
p_lv_werks.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'=ZU01'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=ZU08'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4110'.
perform bdc_field using 'BDC_OKCODE'
'=GESV'.
*perform bdc_field using 'BDC_CURSOR'
* 'RMMG1-MATNR'.
call transaction c_transaction_call_MM03 using i_bdcdata MODE 'N'MESSAGES INTO i_messtab.
<b>Kindly close the previous threads opened by u.</b>
Message was edited by: Judith Jessie Selvi

How to make root for lenovo a3500

Hey Guys
I need to know how to make root for lenovo a3500
I tried Kingo Android Root but it didn't do anything
Need help guys and thanks

I haved to try vroot, but unsucess. I haved upgrate android 4.4.2 and try used kingoroot and vroot unsucess. Who do try sucess? Help me?

How to make a row as selected in output internal table in oops ALV

Hi All,
I have ALV grid output using oops ALV concept, in my output i have a checkbox as first column when i select this checkbox and press a push button 'Print' which is there above ALV grid that particular line in output table should get selected and i need to code some logic for printing selected row.
how to make the particluar row in the output internal table to be selected and where to write the logic for print once it is pressed?
Thanks in advance
Srilakshmi.

but the checkbox is not getting set in internal table when i select some checkboxes.
can anybody explain y the checkbox in internal table not set?
Hi Srilakshmi,
As explained by Uwe, when we change a field ( say check box ) in ALV grid, the view (frontend) changes (showing the tick mark) but the changed data ( normally ) is not transfered to the backend.
We can initiate this data transfer by just registering the cl_gui_alv_grid=>mc_evt_modified edit event
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ). " This does the trick
Now as soon as we check a checkbox, the data_changed event is triggered.
This initiates data transfer to the backend and the checkbox field in internal table is updated.
check the below code for example.
DATA: go_cont            TYPE REF TO cl_gui_custom_container,
      go_grid            TYPE REF TO cl_gui_alv_grid,
      gt_fieldcat        TYPE lvc_t_fcat,
      gv_language        TYPE spras VALUE 'E',
      gt_outtab          TYPE TABLE OF bus_loca_demo WITH HEADER LINE.
START-OF-SELECTION.
CALL SCREEN 100.
*       MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
SET PF-STATUS 'BASIC'.
SET TITLEBAR '001'.
PERFORM create_and_init_alv CHANGING gt_outtab[]
                                       gt_fieldcat.
ENDMODULE.                    "pbo OUTPUT
*       MODULE PAI INPUT                                              *
MODULE pai INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'PRINT'.
      BREAK-POINT.
ENDCASE.
ENDMODULE.                    "pai INPUT
FORM create_and_init_alv CHANGING pt_outtab LIKE gt_outtab[]
                                  pt_fieldcat TYPE lvc_t_fcat.
CHECK go_cont IS NOT BOUND.
CREATE OBJECT go_cont
    EXPORTING
      container_name = 'CUSTOM'.
CREATE OBJECT go_grid
    EXPORTING
      i_parent = go_cont.
PERFORM build_display_table.
PERFORM build_fieldcat CHANGING pt_fieldcat.
go_grid->set_table_for_first_display( CHANGING it_fieldcatalog      = pt_fieldcat
                                                  it_outtab            = pt_outtab ).
go_grid->set_ready_for_input( 1 ).
go_grid->register_edit_event( EXPORTING i_event_id = cl_gui_alv_grid=>mc_evt_modified ). " This does the trick
ENDFORM.                               "CREATE_AND_INIT_ALV
FORM build_display_table.
FREE gt_outtab.
DO 10 TIMES.
    gt_outtab-creation_partner = sy-index.
    gt_outtab-date_field       = sy-datum.
    APPEND gt_outtab.
ENDDO.
ENDFORM.                               "build_display_table
FORM build_fieldcat CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'BUS_LOCA_DEMO'
    CHANGING
      ct_fieldcat      = pt_fieldcat.
LOOP AT pt_fieldcat INTO ls_fcat.
    CASE ls_fcat-fieldname.
      WHEN 'CHECKBOX'.
        ls_fcat-checkbox = 'X'.
        ls_fcat-edit     = abap_true.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'ENTER_FIELD' OR 'DBLCLICK_FIELD'.
        ls_fcat-no_out = abap_true.
        MODIFY pt_fieldcat FROM ls_fcat.
    ENDCASE.
ENDLOOP.
ENDFORM.                               "build_fieldcat
Cheers,
Jose.

Auto start default html gallery

Can I auto start the html gallery (default)?
Can I not use the thumbs?
Is there a better Lightroom template to do this?
bob

I don't believe that feature is supported in Lightroom's default Flash galleries. You could have a look at SlideShow Pro Lr Plug-in, which is altogether much more powerful and flexible tool for making web galleries and slideshows.
http://slideshowpro.net/products/slideshowpro_player/#ssplr

CS4|5 Exporter - how to make slider with no checkbox?

Hi all,
I can't work out how to make a slider with no checkbox next to it.
Also it is possible to make two fields next to each other?
eg:
M: 15 N: 3
Zac, it would be nice if you mentioned in the Docs that multi choice widgets are a Radio Button pair for < 3 otherwise it's a Drop Down box.

Hi Rallymax,
The slider + checkbox behavior was a problem with the first version of the exporter API in CS4, but in CS5 it has been fixed. The problem was in how the exporter host layer interpreted the parameters specified via the Export Param Suite. So when making presets for your exporter, it would make sense to use CS5, since CS4 has the problematic behavior. I haven't tried this, but bringing those presets from CS5 back to CS4 may solve the problem in CS4.
So far we haven't had any need or request for two editable fields side-by-side.
Sure, I can add that detail to the docs.
Regards,
Zac

Anyone know how to make folders for Word and Powerpoint?

I've been trying to make folders for my word documents. i dont know how though!! Thanks for the help!

Open Finder, highlight your Macintosh HD and select New Folder. Name it whatever you want. In Word there is an option to Save File in X folder. Select that new folder you created. Alternative to this is when saving a file a dialog window will open where you can select the folder to save in, select the folder you created and there should be an option to make this the Default folder to save to (but not sure about that option in the Save dialog box).

How to make suggestion for improvements in LR

How do I make suggestions for new features or improvements in LR?
The stacking function, IMO, needs to be improved. The time between shots does not take into account the length of exposure. For example if my exposure is 5 seconds the stacking exposure will not add the two exposures together in the time setting < 4 seconds.
Ideally I would like to see an HDR stacking function, looks at time between exposures (taking into account the length of exposure) and changes in exposure.
ideally there would be similar options for pans and focus stacking.
Thanks
Rich

Submit a feature request or bug report
Go to the above site.

How to make lines for "fill in the blanks?" (iWork Pages 09)

This should be easy since it's something many people do: design a form for others to fill out with a pen or pencil. However, I can't find any information regarding how to make a line after text, like this:
Name _________________ Address _________________________________ Phone __________
...without using the underline character.
Back on the Clarisworks days there was some way to make nice neat lines after text using tabs. However, It's been so long that I can't recall how it worked. I've Googled this issue using every logical term I can think of but found nothing useful. The Pages 09 help file and the user guide seem to be mute on this subject. The Word 2008 help file is similarly silent. However, I'm sure that the greater Pages community knows the answer to this one.
Thanks,
Bill

What you want is called a tab leader. In Pages, to create the underline:
To create a new tab stop using the Text inspector, click in the document where you want to create a new tab stop, click Inspector in the toolbar, and then click Tabs. Click the Add button in the bottom-left corner of the Tabs pane. The new tab stop appears in the Tab Stops column.
Then use the Leader drop down menu to choose a solid line:

Default HTML Gallery: How to make Slider for 'thumb.width' & apply output sharpening on thumbnails

Similar Messages

Maybe you are looking for