Default InfoCube Structure (0CURRENCY)

I have a question about the default InfoCube structure. It has a dimention "U", which is 0CURRENCY. How is it used? What for? I see that if a Key Figure in InfoCube has a type "Amount" it has 0CURRENCY in field "Unit / currency" in its Key Figure description.
Thanks,
Olga

Hi Olga,
Just one question are you new to BI? then welcome to BI.
ok whatever the answer is if you see in RSD1 for 0AMOUNT you can find in Unit / currency = 0CURRENCY.
why because for any amount you required prefix currency this currency stores in 0CURRENCY.
IN cube dimension U is unit dimension.
whenevr you use any keyfigure at that time system automatically identify the Unit/Currency for that keyfigure & then put that Unit/Currency into U Dimension.
Hope you got ur answer.
Regards,

Similar Messages

How to Apply Default Property Structure to File Repository

Hi,
I have added few custom properties to the default property structure and those properties are appearing for all the resources under the /document folder.
I created a file repository but the custom property is not appearing for the resources in this repository.
Is Default Property Structure not used by the File Repository, if not how to apply?
Regards,
Sreeram

Hi sreeram
You can define your custom group render
take a look at his
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f7b176eb-0701-0010-2b84-8edb1f76771d
and this might help too
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/de31ec90-0201-0010-be95-f501d25027a8
Regards
DV

Default Metadata Structure

Hi,
Do we have any default metadata structure in KM?
Thanks,
Priya

Hi...
         You try this link.....
          https://www.sdn.sap.com/irj/sdn/thread?threadID=196168
       Points are welcome
         regards...
         Bala

Best way to integrate system Music & Movies folders with iTunes' default folder structure?

I understand that OSX has system folders that can't be moved (Music, Movies, Documents, etc.). These folders are the only ones that get their specialized icons in the sidebar. I like those icons as they make choosing the right folder easier (even though I can read).
MUSIC:
Isn't there something very un-elegant to have my actual music files buried 4 layers deep in OSX's folder structure? By that I mean, I'd like to click on my (system) Music folder and see my music. But OSX and iTunes have schemed to make users have to deal with Music/iTunes/iTunes Media/Music. It's weird, right?
I am aware that the iTunes library location can be altered via Advanced Prefs, but I like having Music, Podcasts, Movies, etc. be on the same folder level, if that makes sense. If I point iTunes to my (system) Music folder, then my other media will be down below in the iTunes Media folder.
MOVIES:
Likewise, if I let iTunes manage my files, movies go to the Music/iTunes/iTunes Media/Movies folder. I don't let iTunes copy everything into the Media folder (as I don't want to eat HD space with duplicates), but that's still where it wants movies to go when it organizes. Similar to the Music folder issue above, how can I make use of my (system) Movies folder given this setup?
I know that I can just remove whatever folders I want from the sidebar and put in the ones that iTunes uses, but then I lose out on the icons and I end up having permanent folders in my Home folder that don't even get directly used for the media files they're supposed to hold.
Thoughts?

first of all, to get rid of the duplicates, you tell iTunes to consolidate Library.
I think you may be missing the idea of what iTunes does for you. If you have content, like music, that you want to find the file of, you right click the name of the file in itunes and then "show in finder" . For things like iChat, you can simply drag and drop your music into the chat window from itunes, just like it was finder. iTunes organizes your media for you so you don't have to go looking for it.
The same thing goes with videos.
There is no reason to have two of the same files on your computer. Think of iTunes like finder, only it plays media too.
Not everyone uses itunes. Things like quicktime player, after you do a recording, will save the content into your videos folder. They're not on itunes but it uses your video folder to save the recordings. This is just one example of how your video sidebar icon folder will still be useful.
Delete the backups you have of your media unless they're in a format the itunes doesn't support, like lossess formats such as Flac, because it is pointless and wasteful to have two of the same files for music and video on your computer.

Default XML structures in IPC

Hi,
My client wants to implement IPC and connect over PI to other systems.
Is there some documentation on how to achieve this?
Is there something like default XML messages that we can implement?
thx
Robert

One way to make your program use the Saxon 6 transformer is to make this line of code run in its initialization:System.setProperty("javax.xml.transform.TransformerFactory",
"com.icl.saxon.TransformerFactoryImpl");This is for Saxon 6, note, the class name you should use for Saxon 7 is something else. You should find the exact name in the Saxon documentation somewhere.
I don't have any Resin experience, but you need to find the place where you can specify Java system properties for Resin and specify that one (javax.xml.transform.TransformerFactory) there. The command-line version would be
java -Djavax.xml.transform.TransformerFactory=...

Default directory structure - simple question.

I need to add a configuration file to my application.
I thought about adding it to either the web or web/resources directory of my project.
My question is this:
How do I reference either of these directories in my File access routine?
Thanks

Ah OK, now I see .. You can use a propertiesfile and put it in the classpath (inside a WAR, it can be the root of the package or the WEB-INF/lib directory). Then you can retrieve it by ClassLoader#getSystemResourceAsStream().
Basically:
String filename = "config.properties";
InputStream input = ClassLoader.getSystemResourceAsStream(filename);
Properties properties = new Properties();
properties.load(input);
input.close();
String someKey = properties.getProperty("someKey");Where config.properties looks like:someKey = someValue
anotherKey = anotherValueAlso see the java.util.Properties API.

How do I restore the default folder structure in my iPhone internal storage?

The music folder is missing from the internal storage folder so I can't sync anything to my iphone 4. I do have a small amount of music on my phone though? I can't see where that is stored however. How do i rectify this?

Check in Restrictions...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

I have transfered my library my library to a NAS drive. How do I stop Itunes from creating the default folder on the local drive?

I've transferred my Itunes Media Library to a NAS drive, and pointed Itunes (using the advanced preferences tab) to the relevant folder on the NAS drive. I have done this to free up disk space on a computer I primarily use for work but which I use both at home and at work. The NAS drive is at home. (To clarify, I am not expecting Itunes to function at work, only at home when access to the NAS drive is available).
Under certain circumstances Itunes will start-up at work and when it does it will create the folder structure for the Itunes Media Library in the default location (on the local drive) instead of looking for the location I have specified (the NAS drive) which it should not be able to find when I am at work and telling me that it can't find it (which would be fine).
How do I stop Itunes from recreating the default folder structure and defaulting the file path to the standard media library location on my local drive? Every time this happens I have to re-point Itunes to the NAS drive location, which often requires me to reconsolicate libraries which is tedious and time consuming. It seems that in the process of one of these consolidations I have lost some of the media files. They are still in the library (ie. visible in the Itunes window) but Itunes can't find the media associated with that file - identifying them with an excamation mark "!".
Any help with this would be appreciated, as I have read several forums and threads, and despite trying several different approaches I have been unable to address the problem, which appears to be exacerbated by the laptop being remote from the NAS drive.

angelofromnsw wrote:
Can I put the ".itl" and other database files on the NAS, and if so where would I put them? I'm thinking that if the library file is only available at home then the ITunes library won't get corrupted at work when it can't find the media, in the event that I accidentally start up itunes eg. while opening an attachment or disc that can be read by Itunes.
iTunes will start up and you will have an empty library.
Can I put the ".itl" and other database files on the NAS, and if so where would I put them?
Yes.
Quit iTunes.
Copy the /Music/iTunes/ folder on the NAS.
Move the /iTunes media/ folder currently on the NAS into the /iTunes/ folder you just copied to the NAS.
Hold Option, launch iTunes, select Choose library... and select the iTunes folder on the NAS.
You can delete /Music/iTunes/ folder on the internal drive.
If you launch iTunes while NOT comnnected to the NAS, iTunes will recreate the /Music/iTunes/ folder and you will have an empty library.
WHen you are again connected to the NAS, just do step 4 above.
Do you know what the advantages and disadvantages are of having the database files like the ".itl" files stored locally versus on the NAS?
Keeping everyhing together inside the iTunes folder makes it "cleaner" and simpler to manage everything.

Transport error while adding new Navigational Attr to InfoCube on BIA

Hi Gurus,
I have added a new field in the Profit Center Master data(0PROFIT_CTR_ATTR) in R/3 and the changes seem to be working fine in BW. This 0PROFIT_CTR is present in one of the InfoCubes that we have on the BIA. I have turned 'ON' the newly added Navigational Attribute in the InfoCube and have saved the changes. Now when I try to transport these changes to the QA for testing, the transport is getting cancelled with the message 'NOT CORRECT USAGE' in rsddtrex.
I am wondering if this is because I have added and turned'ON' a new Navigational attribute in the InfoCube under the BIA.Maybe the BIA index and the the InfoCube structure do not match because of this newly added Nav Attr in the InfoCube?
Do you have any suggestions on this. I was under the impresiion that even if this was the case, the transports should succeed and only the rollup to the BIA process should fail in the BIA rather than the transports to QA.
Any suggestions?
Thanks
Arvind

Hi.
Did you check if note 1223284 was applied in yor system ?
1223284 - BIA index set to inactive 'A' after InfoCube activation.
Thanks,
Walter Oliveira.

DUmp Erro ASSIGN_TYPE_CONFLICT while loading from DSO to INFOCUBE

HI ALL,
Here i had rquirement of modifying the Tranformation rules and i have done some routine coding for a particular infoobject
and deleted the data from DOS & Cube , then i started Loading to DSO, here i got the sucess for DSO, now i have got the modified data of the particular Infoobject in the DSO,
But i am facing a Dump Error while loading data from DSO to Cube thorugh the DTP .
HEre is the Error "ASSIGN_TYPE_CONFLICT" which i see in ST22.
Plz,
Thanks in Advance,
sravan

HI,
When i started the load for the first time i got he same error, so i have activated the DTP and laoded it again,
then i faced the same problem,
where the Modified data is already in DSO and i have validated the Data also, that is ok ...
so i need to Delete or to need to create another DTP to load the data from DSA to CUBE.
and even i have cheked all the tansformation rules they are all fine the DSO structure and Infocube Structure is ok,
Please suggest,
Thanks LAX,

Create folder - setting properties in default property screen

Hello
You can create a folder with following url: 'http://com.sap.cm/.?uicommand=new_folder'
Setting Collection renderer to html renderer.
This works fine.
Now, I've got the requirement to modify the standard. I have an own property group which hangs in the default properties structure.
I need to get a folder upload (with 2 additional input fields) and only my property group (already displayed, so I need to get rid of the link and show the properties).
To start, I found the [One-Step-Screenflow tutorial|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/netweaver/netweaver-developers-guide-2004s/NetWeaverDevelopersGuide2004s_Documents/KM_articles_new/howto/km/flexui/Implementing%20Flexible%20UI%20One-Step-Screenflow.html].
But the requirement says we need, just as the standard, the default properties window of our own property group (just this tab) WITH the javascript checks on the mandatory fields.
Do you have any clue how to achieve this? I looked already in the standard SAP code, but can't figure out how to achieve this one..
Thanks for hints and tips.. or the solution of course
Christof

Hey Robert
I opened 2 threads because I didn't know which title would attract attention + which solutions are possible. I propose we discuss this matter further in my other thread ( https://forums.sdn.sap.com/thread.jspa?threadID=1207836&tstart=0 ) because it's useless answering plus minus 2 times the same questions But I awarded you the points!
So I close this one now..
Christof

Flat File to InfoCube Load Issue

Hello All,
              I am newbie in the SAP BW land. Probably a simple question to BW Experts.
This is crude implementation of the Fu and Fu example.
Environment SAP BW 7.0
Iam trying to load a flat file to the Info Cube.
1. I am able to successfully preview the data from the data sources
2. Also able to load the data to the PSA, which i see from PSA maintenance screen
Issue arises when i try to load the data to the Info Cube by running the DTP Process, it just does not load the data.
I ma unable to figure of what the issue is
Following the structure of the Flat File with 1 line of data
Day      Unit of Measure     Customer ID     Meterial Number     Sales Representative ID     Sales Office     Sales Region     Price of Material     Sales quantity     Sales revenue     Currency
20100510     gms     1122334455     92138     9710274     Chicago     NorthEast     890     50     928     USD
Following is the structure of the Info Cube
Characteristics
Time
Unit
Customer ID
Material Number
Sales Representative ID
Sales Office
Sales Region
Measures
Price of Material
Sales quantity
Sales revenue
--- also where can i find a data flow diagram or steps of what needs to be done to design a standard cube loading process
Please tell me where am I going wrong.

II think i made progress but i still do not see the data in the InfoCube
When i visit the PSA by
visiting the source system -> Manage PSA -> Select the line item -> PSA Maintenance-> I see the record completely like this
@5B@     1     1     05/10/2010     GMS     1,122,334,455     92,138     9,710,274     CHICAGO     NORTHEAST     890     50     928
But when i run the DTP Process i see the following error message
I think this is due to a data type mismatch between flat file and the infocube.
Please adivse
Error I see is
@5C@     No SID found for value 'GMS ' of characteristic 0UNIT     BRAIN     70     @35@     @3R@
Also where can i click or extract the InfoCube structure in plain text so that i can post it on the forum for your better visibility

Official directory structure for itunes 8 in OSX

I have had so many different locations for my itunes libraries over the years and I would like place the on a time capsule drive now. What is the default directory structure for itunes8? Are movies, podcasts, tv shows all in the same directory?

HD>Users>Your Account>Music>iTunes>iTunes Music - this is the default for iTunes.
The iTunes folder contains the data base file, .xml, genius, art work etc - the iTunes Music contains all your music in folders arranged by artist then album. Note that this is true as long as you have the iTunes prefs>Advanced - the 'keep' and 'copy' options are enabled.
MJ

Urgent : InfoCube/Dimension

Step 1 : In development box, the Cube was empty and did the few changes as below
From Dimension1 (already have 4 characteristics)
Deleted 3 characteristics from InfoCube via remodeling toolboox - Check the scheduled conversion and it was successful
added 1 characteristic to InfoCube manually just by dragging
Checked the dimension table and the changes are reflecting in the dimension table
Step 2 : The InfoCube ZIBSDPR01 moved to Quality
Note : There is data in the quality box
The transport failed returning the Error Code 8
The below text was highlighted in yellow (warnings)
1) Enhancement category for table missing
2) Enhancement category for include or subtype missing
The below text was highlighted in Red (error)
Dimension1 table could not be activated
But the InfoCube structure got changed (showing only 2 chars in dimension1
- (4 of earlier - 3 (of deleted) +1 (newly added))
Kindly let me know what could be reason for failing the transport request.
Is the error because of manually adding the char by dragging
Any information will be appreciated.
Thanks

DPN,
As you said the reason might be that. But you should remodel using only remodeling toolkit.

Can't I change the directory structure?

          Hello Everybody,
          So far everything is working when use the default directory structure,i.e. mydomain/applications/myWebApp/WEB-INF/classes/some package structure.
          But we have application with lot of html files which call servlets like this..myWebApp/WebApp/myServlet.
          In order not to change my html files, I've created this WebApp directory under weblogic directory structure shown above.
          I've done some trial and error in web.xml file to make servlets execute. But 404 error is showing up.
          I tried putting in web.xml like this...
          <servlet>
          <servlet-name>/WebApp/HelloWorldServlet</servlet-name>
          <servlet-class>com.reliable.servlets.HelloWorldServlet</servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name>HelloWorldServlet</servlet-name>
          <url-pattern>/WebApp/HelloWorldServlet/*</url-pattern>
          </servlet-mapping>
          I also tried taking out slash(/) before WebApp but no luck.
          Can any one guide how to make this work.
          Thanks so much,
          Sri


What he needs is something like:
          <servlet>
          <servlet-name>HHH</servlet-name>
          <servlet-class>com.reliable.servlets.HelloWorldServlet</servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name>HHH</servlet-name>
          <url-pattern>HelloWorldServlet/*</url-pattern>
          </servlet-mapping>
          HHH is simply to link the mapping declaration to the servlet declaration.
          Then the URL would be something like:
          http://myserver:8801/appname/HelloWorldServlet/abc
          If this is the default app, then appname/ drops out.
          There is a good discussion of this in our docs and
          the servlet spec discusses this as well.
          mark
          Keith wrote:
          > Hi Sri and Alfonso,
          > Did you ever get the code? I am interested in seeing how I can do that too. I
          > have to migrate my servlets and jsp from tomcat and all the html files are referencing
          > the servlets with this format:
          > http://abc/servlet/servletA
          >
          > Thanks!
          > keith
          >
          > "sri" <[email protected]> wrote:
          > >
          > >Hi Alfonso,
          > >Thanks for trying to help me. In your response you said "Just copy my code".
          > >But I didn't find any code in your reply.
          > >Can you please clarify.
          > >Thanks so much,
          > >Sri
          > >"alfonso" <[email protected]> wrote:
          > >>
          > >>You are in wrong, the servlet name is a short name to identify the servlet
          > >in xml file not in URL. You can not load many servlet without to register
          > >it,one by one. But i found a solution, that you can find in servlet without
          > >registration subject. (pe: we have servlets calls as http;//b2web/servlet/XXX)
          > >>just copy my code, or email me if you have problems to [email protected]
          > >>
          > >>"sri" <[email protected]> wrote:
          > >>>
          > >>>Hello Everybody,
          > >>>So far everything is working when use the default directory structure,i.e.
          > >mydomain/applications/myWebApp/WEB-INF/classes/some package structure.
          > >>>
          > >>>But we have application with lot of html files which call servlets like
          > >this..myWebApp/WebApp/myServlet.
          > >>>
          > >>>In order not to change my html files, I've created this WebApp directory
          > >under weblogic directory structure shown above.
          > >>>I've done some trial and error in web.xml file to make servlets execute.
          > >But 404 error is showing up.
          > >>>I tried putting in web.xml like this...
          > >>you are in wrong, the servlet name is
          > >>> <servlet>
          > >>> <servlet-name>/WebApp/HelloWorldServlet</servlet-name>
          > >>> <servlet-class>com.reliable.servlets.HelloWorldServlet</servlet-class>
          > >>> </servlet>
          > >>> <servlet-mapping>
          > >>> <servlet-name>HelloWorldServlet</servlet-name>
          > >>> <url-pattern>/WebApp/HelloWorldServlet/*</url-pattern>
          > >>> </servlet-mapping>
          > >>>
          > >>>I also tried taking out slash(/) before WebApp but no luck.
          > >>>
          > >>>Can any one guide how to make this work.
          > >>>
          > >>>Thanks so much,
          > >>>Sri
          > >>
          > >

Default InfoCube Structure (0CURRENCY)

Similar Messages

Maybe you are looking for