Default/Initial ODI Studio Windows Layout

How do I restore the Default/Initial ODI Studio Windows Layout.

I tried to restore .../AppData/Roaming/odi/.../Editing.Layout to its original values with no effect.
My problem is: I wanted to configure my screens as I had them in Sunopsis. After floating the Operator screen the Operator screen takes up the entire window. A session screen will be hidden behind the Operator screen and can only be seen by minimizing the Operator screen (it doesn't tile with the Operator screen). After viewing the session screen I must close everything and re-institute the Operator screen from the Main Menu.
The Developer screen behaves normally after float with subscreens tiliing normally.
If I could get back the the default layout, I could live with that.

Similar Messages

Installing ODI Studio and ODI Stand-alone on 64 bit Windows 7

Can anybody tell me which ODI downloads I need in order to install ODI Studio and ODI Stand-alone on my 64-bit Windows 7 machine?
I've already created the DB repository with RCU, but I'm having trouble with the ODI installation: I just spent an hour and a half downloading 2.5GB of installers that turned out to be wrong - the SETUP.EXE complained that it was a 32 bit installer and wouldn't work on 64 bit Windows - so I now need to find a 64-bit installer instead (another 2.5GB presumably...). Not sure which of the multiple download options to choose and I don't want to spend all day waiting for the wrong files to download again.
Looking through OTN and the (typically confusing) Oracle installation docs, there's a load of stuff about using 32-bit JREs on 64-bit Windows to get around 64/32-bit Java problems later on, or lots of stuff about all the Fusion requirements etc. But I don't want the JEE stuff (I already have about 4 different WebLogic installations because every time I install any Oracle "Fusion" stuff it slaps another WebLogic in there as well), and I'm miles away from getting any Java runtime problems with ODI when I can't even figure out the right installer to use for 64 bit Windows.
Maybe it's just me: every time I try to install any of Oracle's server products (apart from the RDBMS itself), I end up wading through endless lists of cross-linked installation pre-requisites and searching OTN forums for the single secret combination of installer/JDK/JRE/operating system/database character-set/RDBMS version and desperate prayers to minor deities that will permit the installation to go ahead...
So any help will be gratefully received!

You will have to download ODI with the download option "for All Platforms" from http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

ODI Studio on Windows 7 64bit or 32bit mode?

Hello,
Anyone know anything about running ODI studio on Windows 7 64bit or 32bit mode? Are there certification for this OS in either mode? What are the certification plans?
Thanks,

Have a read of the certification matrix for 11G :- http://www.oracle.com/technology/products/oracle-data-integrator/oracle_odi_11gr1_(11.1.1.x)_certification_matrix.xls
Cheers
John
http://john-goodwin.blogspot.com/

Problem getting MySQL driver loaded in ODI Studio (ODI 11g)

Hello -
I am trying to create a new data server in the physical architecture under the MySQL technology. Since there is no MySQL JDBC driver included as there was in ODI 10g, I looked into the documentation to find a similar drivers directory that I had used in ODI 10g for loading other JDBC drivers. I would like to be able to select the MySQL Connector/J driver from the drop-down list of usable drivers in the Driver dialog window. I found this link, that explains how to install drivers:
http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
I followed the documents instructions, added the file "mysql-connector-java-5.1.13-bin.jar" to my directory "C:\Documents and Settings\<my username>\Application Data\odi\oracledi\userlib" and restarted ODI Studio. I still cannot get the app to recognize the new driver to use, am I missing a step or is there a known issue with this method? More importantly has anyone been able to get this to register with the Driver dialog box successfully?
With ODI Studio open, I attempted to delete the mysql jar file from my userlib directory and there was an error that said the file was in use... so I assume that ODI Studio is using the file but not registering it within the Driver selection dialog.

I think we found our own answer... apparently the ODI Studio interface does not dynamically load that drop-down list from registered drivers in the classpath. We can still use the driver name by manually typing it into the "JDBC Driver:" text box.

Set default Initial View to Bookmarks Panel and Page on all new docs

Hello Acrobat Experts,
We convert *many* Word docs to PDF. We have PDFMaker force security on all docs. Now every document has the security settings we want.
That works.
We want to force the default Initial View to be Bookmarks Panel and Page so that *every* new document shows the Bookmark Panel and the Page.
We don't want to set this per document (which is a multi-setp process and a hassle, especially now that security is enabled) but globally for all new documents created by Adobe Acrobat.
Any and all advice is most welcome.
Thank you in advance.
Tech details:
Acrobat Professional 8.1.7
Windows Xp Professional (all current updates)

The article I pointed to in my Oct 20, 2009 post #3 contains two pointers that might assist to initially open the PDF fitting the page to the window.
I think you may be after "Vire [/Fit]" as described in the article;
[ /PageMode /UseOutlines
/Page 1 /View [/Fit ]
/DOCVIEW pdfmark
These lines of code open your PDF document with the bookmarks panel open. If you just want the document on its own try "UseNone" instead of "UseOutlines". Here are some additional values:
/Page 1 opens the PDF on page 1
View [/Fit ] opens the PDF Fit to page
And the article points to the PDFMark reference where you might look at Actions and Destinations on page 47.
I've not tried to do this myself so would you be kind enough to post your result and let us know the version of Acrobat you're using?

AA2.0 How do I transfer the Window layout...

The new monster machine has been delivered and I'm working on setting it up;
> Dell Precision Workstation T7400
> XP-64
> Dual Socket, Dual Quad Core Xeon
> 8GB DDR2 RAM
> 120GB SSD C:\
> 320GB D:\ [ WD 7200 ]
> 320GB E:\ [ WD 7200 ]
> 320GB F:\ [ WD 7200 ]
> SB X-Fi Xtreme Music [WDM] Sound Card
(They want to eventually be able to do video work also that's why I had this monster ordered)
I however, don't want to spen the next 6 days setting up AA2.0
is there anyway to transfer the window layout settings from one AA2.0 install to a new one,
the first run layout is way too much junk for what I use it for
I tried searching but nothing of any relevance was presented in the results
all I want is to have it look as close to AA1.0 as possible
which I have already managed to do on my home machine
and the previous (old machine) install here
however, I'm not kidding when I say it takes 6 days to set it up the way I want
just trying to move the level indicator below the main window and above the rest
is nearly impossible it always goes behind or in front of the main window
making a huge useless 1000Px wide x 800Px tall level indicator (screen res 1152x 854)
or it pops behind or in front of one of the other small windows
here's my setup:
Edit View:
1> Regular Tool Bar (not the Hybrid)
2> Main window
3> Transport Controls
4> Time window
5> Zoom Controls
6> Selection / View position indicator
7> Level Indicator
8> I float the Cue list & only open it when I need it.
here's AA1.0 on this machine
The other AA2.0 machines aren't running
I'll post my AA2.0 window layout later (when I fire it up tomorow)
A-Ω

Thanks Craig;
I've been using 2.0 like this since I set it up and I don't use a lot of the "extra features"
working strictly in EV, I like my wave as big as I can have it while still being able to
use the rest of the machine
the work I do has me splitting words to correct:
stuttering
ummm's
repeated words
andahhhh's
etc.
all while making it sound like the speech errors never happened
1152 x 864 on a 17" monitor makes the normal windows text tiny and unreadable
without modification to the default font size and then selecting the Windows (Large) theme
I'm from the old school when a 15" monitor was considered huge and 800 x 600 was the res. to have
here's my screen from home office setup on the exact same monitor res. as the AA1.0 from the office setup
I just want to transfer the settings for this layout because it's what I use
A-Ω

Need to install ODI studio and ODI sdk(Developer Installation)

HelloHi every one,
Can any one suggest me in brief, how to install them, and also what are the things that I need to do before installing them, And where do I get them.
can you give me the brief guidance.
configuration:- Windows XP service pack 3 processor:-i7 , RAM-3.22GB.
Thanks,
Karthik

The pre-requsites for installing ODI is
1) supportable RDBMS 2) JDK (preferably version less than 7) you can search for ODI support matrix to get the exact supportable versions.
for downloading them goto https://edelivery.oracle.com/ (you can use the same oracle acct that you have for this discussion forum)
ODI installations are of two types:
1) Standalone installation (check boxes : ODI Studio, SDK, Standalone Agent while installation) (you can refer to any of the ODI blogs which will have a step by step process of installing ODI)
2) Java EE installation (integration with Oracle Web-logic server/[IBM websphere as well if ODI 11.1.17]) this requires a webserver to be installed before installing ODI.
Thanks,
Parasuram

Default initial view that applies to all PDFs opened

Is it possible to set a default PDF initial view that applies to every pdf opened, regardless of the source of the pdf? Simply put, I want to have the initial view of EVERY pdf I open to be at 100% zoom and no bookmark panel. Obviously this can be done manually every time I open a pdf, which will then reopen with those settings. It seems logical that I should be able to set a default initial view that will apply to any pdf I open and not require me to manually set every one. I've tried every option noted in all the forums I have found, using prologue and epilogue, file>properties, edit>preferences, action wizard. It all boils down to this...I don't want to manually set anything. I want to open pdf documents in the initial view I prefer.

I have spend a great deal of time researching this exact question. What I have found is that essentially the answer is "no". I have come up with a workaround that isn't painless, but it gets the results I want without having to touch every pdf after it is opened.
I set up an Action in Acrobat that has the options I want (page and 100% with no bookmark panel open) and run it against pdfs in a specified directory. It sets all initial views for any pdf in the directory to what I want. The action can also be run against any directory or file, but for my purposes I find doing it in a sort of "batch" mode works best. To set the Action:
     1.     Open Acrobat (with no other pdfs open)
     2.     File >Action Wizard>Create New Action
     3.     On right panel set
                         Start with:     "Ask When Action is Started"
                         Save to:          "The Same Folder Selected at Start", check "Overwrite existing Files"
                                             (if you plan to run this action against a directory as I am)
     4.     From left panel
                         Select Document Processing>Set Open Options
     5.     In right panel click on "Options" for the step you just created and set the initial view you desire
     6.     Save
When you want to use the action you can access it from Acrobat opening window or any pdf file you currently have open.
Another alternative is to use Distiller with epilogue.ps or prologue.ps to append this initial view to any document created. As I don't create many pdfs, it didn't really help with what I wanted to do. .

Where is the "Window Layouts" file?

I exported my 65 GB movie.
I didn't check the location; just assumed it was going to plant the last place I exported a movie to.
I clicked the "export" command again to see where it defaulted to; I can see the movie name, but the finder cannot locate either my movie nor the "Window Layouts" folder it is in, presumably because it's buried in a bundled file somewhere.
RRRRrrrrr
I'm going to have to export the movie again unless somebody can tell me where the *** this file is...
And it was going so well...
Thanks!

Thanks, guys.
I just downloaded and installed a nifty little program called "Find File" which searches inside bundles and packages, too.
http://www.versiontracker.com/dyn/moreinfo/macosx/10906315
Found it, just where you said, Nick!
FCP really shouldn't export movies to a preferences file! That seems a little like a glitch to me...

ODI Studio slow

Hi,
I installed ODI Studio 11.1.1 (Generic) [I am using Windows7, 4GB RAM, but tried different compatibility modes].
I changed odi.conf to point to 32 bit java (C:\Program Files (x86)\Java\jdk1.6.0_31).
I created master repository and work repository, smoothly.
I didn't install Web Logic Server, and "ODI server", as I need only simple local deployment for eduction.
I started to play with ODI Studio, but working in Designer is VERY SLOW. Windows and tabs are responding with huge delay.
I checked tables in master repository, none is massive (as it is fresh start) to justify such a poor interaction.
I set AddVMOption -XX:MaxPermSize=512M in odi.conf, thinking it is memory related, but task manager is not showing high memory consumption or processors.
Did anyone had similar problem ?

Hi !
I am facing the same issue.
I login to ODI via Citrix Server. My ODI is installed on Citrix machine and my master repository and my work repository at a database which is not installed on the citrix machine.
When i see the solution that is provided earlier in this thread to have the work repository setup locally - does this mean that the work repository needs to be setup on a database on citrix where my ODI is installed?
Please validate and provide further inputs as to what are the other ways to resolve this issue.
Thanks & Regards,
Prerna

Odi studio very slow

Hi,I installed ODI Studio12c on linux Server and created master repository and work repository, smoothly.
but when I started to play with ODI Studio locally on my laptop, it is VERY SLOW. Windows and tabs are responding with huge delay.
Did anyone had similar problem ?

Hi,
I have also the ODI 12C installed on Windows 7 OS. Might be you are facing the issue because of your configuration of PC.
I have 4GB RAM here, please check the configuration to find the reason behind the slow performance of ODI.
Thanks & Best Regards
Shiv Kumar

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

How can I set to boot from MAC OS by default after I installed Windows?

How can I choose to boot from MAC OS by default after I installed Windows? I have a MacBook Pro Leo 10.6.8. I used bootcamp to install Windows XP SP2, but now if I don't press the option key it will start up with Windows, and I don't want that. Thanks for any help.

Select it in the Startup Disk pane of System Preferences.
(61137)

HT203477 My FCP 10.1 is freezing at "Restore window layout" I am running on mavericks and the layout folder in not in applications support... What do I do ???

My FCP 10.1 is freezing at "Restore window layout" I am running on mavericks and the layout folder in not in library/applications support/ final cut pro... What do I do ???

Had the same issues. For me, I found unmounting any external drives and relaunching FCPX worked.
Mavericks seems to have some issues with launching Final Cut, so its best to launch and then plug in any external drives - hope that helps.
Source - http://support-partners.com/troubleshooting-tips-for-fcpx-on-mavericks/
M

Default/Initial ODI Studio Windows Layout

Similar Messages

Maybe you are looking for