Default JTree with the colors, sports and food nodes

Hi!
Is there a way to create a JTree with a null root node and no elements without Swing adding the colors, sports and food nodes automatically ?
thanks

Create a new DefaultMutableTreeNode and set it as the root.

Similar Messages

Premiere Pro CS5.5 -very strange issue with the color tones and Preview-

I deal with a very strange and not usual problem in Premiere Pro CS5.5 (also the version CS5). What I try to do is just a simple color correction. The problem occurs when I try to use Three Way Color Corrector but it happens with Fast Color Corrector also.
When applying the Three-Way Color Correction and without changing anything else (just applying), can be seen in the preview of the soft how sudden changes in color tones. For example, the gray tone becomes a little more green, but also can be seen very easy a change in the other color tones too. In fact even RGB Parade show the same thing. This is very, very strange and unacceptable and saw that it happens when trying to use Colorista II too.
I tried the same thing in Sony Vegas Pro 11 and I downloaded the trial version of Edius 6 to convince me if the same thing happens. Not! In Sony Vegas and Edius everything is working correctly, I have not experienced these problems in the preview's of this 2 others softs.
This issue is very annoying because every possible color correction is based on what we see in the preview and if in this preview the tones are seen altered realize that can not make a decent color correction. So what happens here?!? I uploaded a small video demonstration to see very clearly about what I'm talking. You can see in the next link: http://vimeo.com/35317616

Yes Jim, you're right. No changes in the scopes when one just apply RGB Curves, Fast Color Corrector, RGB Color Corrector or the Three way Color Corrector (last three thanks to the new update 6.03). I already wrote that Adobe team has been able to fix this bug for some of the tools/effects.
But Brightness&Contrast? Change Color? Color Balance? Levels? MBLooks? Twixtor? Colorista II? Does it seem normally that all scopes or just one of them jump when you just apply one of these effects/tools? Not to say that in some situations even the tones change (especially in shadows&midtones).
You say this is something "very minimal". I say it is not so. I don't find normally to make a very detalied CC with Three way Color Corrector and then when applying Colorista/MBLooks, for example, the scopes jump and inclusively some tones may be influenced. And I left clear examples in this topic where you can see that this is possible. I don't know if this is "very minimal" or not, but is really so impossible to edit in Premiere without this "very minimal" issue?!? How can it be possible in other softs (Edius, Media Composer, Vegas Pro) and in Premiere not?!?
One more thing: many of us use intermediate codecs in the editing process. Do you find normally that a AVCHD video have the lumninance at approximately 110IRE, to export it directly to Cineform and then import it in Premiere, and the waveform shows the luminance at 100IRE?!? How is this possible?!? So the AVCHD video have a 110IRE luminance, you convert this video to Cineform without changing anything, and then this Cineform video have the luminance at 100IRE?!? And anyone can verify this example.
So, how can one trust in this soft?!?

Any file I open, along with the color swatches and sampler, in PS has a warm white color where it is supposed to be white. I don't now how this happened and I have no idea how to get the whites back. Please help, thanks, P

as I stated. the white in any file I open in PS s a warm white. I don't know how this happened or how to fix it. I do know it is not my PC or moniter. Only in PS. any hepl is appriciated, thanks, P

My5cats, Cris may have more to add but here are some thoughts. A calibrated monitor does have warm whites. We perceive a blue white as being correct but it isn't. i don't know if you are using monitor calibration or not. One possible area is that Photoshop is set to a paper or some other gamut. You can check (in PS) by going to the Edit menu > Color settings. Here is a picture of mine. I set the working space to sRGB which is used for the web and many printers. If you get a correct setting , consider saving it.

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

HT2513 my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas?

my iCal calendar that I created with the color green keeps changing to purple. no matter how many times I change it to green, it turns it back to purple. Of course this only happens with iCloud and not "from my Mac". Any ideas on how to correct this? This seems like a trivial error, but it's super annoying.

I called Apple and they said that they know about this problem. It's a problem with iCloud which their Engineers know about. (there was a new iCloud release, hence...) No ETA for a fix yet. I asked that this be escalated so Engineering doesn't put it at the bottom of their fix list. I talked to a Senior Advisor and mentioned to them to have QA check their regression tests as this has happened before to me (the problem just didn't take this long to resolve). I like to use green too for important stuff, so I've resorted to creating a new calendar using the normal calendar green for events going forward. They could have picked another color besides green to have this problem with and I wouldn't have been so upset. ;-)

I can t use my time capsule with time machine. When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

See > Using Time Machine with a Time Capsule
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm

My computer is all out of sort with the color and it is in like a negitative effect that i cannot seem to fix. How do i fix it?

my computer is all out of sort with the color and it is in like a negitative effect that i cannot seem to fix. How do i fix it?

Try System Preferences>Universal Access>Seeing>Display. See if White on Black' has been selected.
If so, select 'Black on White'.
Ciao.
Message was edited by: OGELTHORPE

HT1692 Have recently installed itunes and outlook on a new computer. Have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, Help!

My new computer is 64-bit running Windows 7 pro, SP1 and Microsoft Office 2010 Pro Plus 32-bit
My phone is a 4S runing iOS 6.1.3
Very frustrated now that I have recently installed itunes and outlook on this new computer. Everything worked perfectly ok on my laptop which was also 64-bit Windows 7 and running 32-bit Microsoft Office 2010 Pro. I have multiple email accounts set up in Outlook tho only use contacts and calendar in relation to one of these. Cannot sync itunes with the correct contacts and calendars, when I sync the calendar and contacts are empty. Not sure if there is any way to point itunes to particular address books and calendars.
I have installed and uninstalled itunes 3 times and thank goodness have a backup
Can anyone help please?
thanks in anticipation

I had my home computer set up to sync to work's Exchange server. It worked well, but I didn't like seeing work email messages and other programs trying to sync with my default Outlook folder, which was then the Exchange (& work related) .ost file. I know there are various ways to manage those problems using filters, view, subfolders, etc., but it was a hassle for me. I think it could work well for many other folks.
For now, I have published my work calendar and subscribed to that calendar on my home computer. So I have view only access to my calendar on my home computer (and I can add/edit calendar items on my iPad (or Outlook Web Access) when away from work). This is not quite what I wanted, but it may work.
It almost makes me long for the days when I used my Windows Mobile Treo to sync back and forth between exchange at work and outlook at home (but had many sync conflicts as a result).

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

How do I change the default locations for the iTunes music and iPhone back-up folders?

My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc. When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition. I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice). Is there a way to change the default folders for the iTunes library and iPhone files? It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
Thanks!

You can't selectively move individual folders withing the iTunes folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
In the resulting dialog, click the Choose Library button.
Select the iTunes folder you moved to the external hard drive.
Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color.

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color. I click on a new color and press enter and nothing happens...not sure what I am doing wrong.

What do you currently see?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Do you have the menu bar?
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Do you have any toolbars visible at all?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Possible to get the color space and resolution from the .eps file

Hi all,
We have using the InDesign CS3 5.0.4, windows, javascript. We need to get the color space and resolution of the graphics (.eps) file using scripting.
The properties of the image like (actualPpi and effectivePpi will return the value only for the .tiff. and .jpg etc) but it will not return the .eps file resolution values.
Kindly give me the suggesting for the decrepancies.
Regards,
Nagaraj

... open them programmatically in PhotoShop, read out resolution and color space ...
On opening them in Photoshop, it asks you "what resolution shall I use, and what color space shall I apply?"
A single EPS may contain any number of embedded bitmaps, with any horizontal and vertical resolution, and in any color space. You can use only a few of these with Illustrator -- and even only one at a time with Photoshop --, but other programs allow just about every possible combination.
Not to mention procedurally generated bitmaps, also possible with PostScript.

I have a problem with the effect gallery and the saving libraries in Illustrator CS6

Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)

I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

What are the dimensions of the Apple Watch magnetic charger? Is the thickness the same for both the Watch Sport and Watch chargers?

I'm interested in the dimensions of the magnetic charger for both the Watch Sport and Watch. There are a number of third party charger stands out now and was wondering if a charger stand needs to be specific for the Sport or Watch or if any stand will fit accommodate both models.

Just for clarification, the white shown on the US Apple store charger is only a protective coating on the magnetic side so the charger doesn't scratch the watch. The remainder of the charger is polished metal. The Sport charger is entirely white, with no metal showing. The point is the magnetic charger ordered from the Apple store has a different thickness measurement from the magnetic charger that comes with the Watch Sport. This is only an issue for any aftermarket charging stand that expects chargers from both the Apple Watch and the Sport Watch to fit flush with the face of their stand. Only one or the other can fit flush. An option would be to manufacture for the thicker Sport Watch and include a 0.1" spacer for the Watch. This would allow either to fit flush with a stand face.
I'm done.

Default JTree with the colors, sports and food nodes

Similar Messages

Maybe you are looking for