Default logical system for usersettings

Dear Experts,
I hope you can help me with the following question:
We use SRM 7.0 with multiple backend systems. If the endusers want to default their cost centers in SRM via the portal themselves by clicking on "Usersettings" and selecting the attribute "cost center", the first thing that needs to be entered is the Logical system.
Is it possible to default the logical system in the PPOMA so that the end user does not have to select it?
Thanks a lot in advance!
T.

Hi Toppika,
Could you please try to define a logical system for the attribute 'ACS'  and tick it as default at the user level if possible or at the org unit level?
In such cases, the system should default the logical system.
Thanks and regards,
Ranjan

Similar Messages

  • Default logical system names for application and metadata in models.

    hi,
    I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
    how do we change them and re import after changing? in abap we cant change our code in test and prod systems right  so how is it in web dynpro java ?
    thanks

    Hi Jeschael,
    thanks for the reponse.
    When I create the model, I give the default logical system names and on the next screen I give the
    ip address of the backend system, client , login, password etc
    Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
    thanks
    B

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • Finding "Default Logical System Name Model Instance" in DC Project

    Hi,
    While Creating an Adaptive RFCModel, one defines the
    Default Logical System Name for Model Instance & the
    Default Logical System Name for RFCMetadata.
    In which file can I find these settings at a later stage in the Project File Structure.
    Ofcourse, I can view them in the WedynproContentAdministrator under the Jco Destinations.
    But is there anyway to access them in the NWDS?
    Regards
    MK

    Hello MK,
    You'll find the Logical System Names of the JCo destinations in the file ".wdproperties" under the project structure.
    Bala

  • Changing Default logical system names of a model.

    Hi
        How could i change the
         Default logical system name for model instances:
         Default logical syatem name for RFC metadata:
        values for existing model? without recreating the model.
         Thanx

    Hi shah kond,
    you can change  rfc destinations of model in 2 differnet ways.
    firs one: right clcik on project
              from the context menu select propeties
              it will open a dialogbox from that select dynpro references then click on jco references tab
    by using add and remove buttons u can add and remove joc destnations
    2.expand ur model class double click output class.now seelct properties view.there u can change the jco destination
    hope this will use ful for u
    Regards
    Naidu

  • ALE logical systems for business service or process

    Hi,
    I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
    I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
    "Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
    How can I handle this problem?
    Should I hard code values somewhere?
    Which ones?
    I have read the other posts for the error above, but my situation seems to be different.
    Help!
    Chris

    Hi,
    To solve your problem, here my solution:
    1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
    2/ Create this Logical System on your target system (R/3).
    WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
    Mickael.

  • Logical System for RFC-Business system?

    Hi,
    I want use RFC adapter for my scenario like File to RFC.
    The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
    Regards
    Gopi

    logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
    you can check the logical system names of ABAP application servers at bd54 tx code.
    Regards,
    Henrique.

  • Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

    Hi,
    I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
    Clients View
    Cl. Name City Crcy
    000 SAP AG Konzern Walldorf EUR
    001 Auslieferungsmandant R11 Kundstadt USD
    066 Test EarlyWatch Profiles Walldorf EUR
    I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
    Kindly help me.
    Kannan

    hi,
    ? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
    ? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
    ? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
    ? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
    ? Then click on the Remote Logon then we go to BW server give RFC – SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
    ? R/3 - B W - R/3
    ? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
    ? PC ?Flat file , DB ? Database
    ? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
    ? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
    ? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
    hope it helps u
    Ramesh

  • How to create Logical System for ALE?

    Hi All,
       I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing".  Help with proper documentation.
    Thanks in Advance.

    Hi,
    what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
    Here i am giving link go through that and do practice,
    http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
    http://www.****************/Tutorials/ALE/ALEMainPage.htm
    Reward if it useful
    lakshmi.

  • Cost center integration with HR - logical system for CRT inconsistent

    Hi there,
    we are distributing Cost centers from our SAP ERP system to another SAP HR system via ALE [COSMAS01 basic type].
    The cost center created in target system contains information about source system logical system name - table CSKS, field LOGSYSTEM.
    This is causing problems in Travel Managment in SAP HR system, where we get the error: Logical system for CTR inconsistent.
    Cost centers created/changed in HR system does not contain any value in CSKS-LOGSYSTEM field and work fine.
    Any ideas how to solve this issue?
    For now to fix the issue, user needs to do a phony change in SAP HR system to get rid of original LOGSYSTEM value.
    I am thinking about removing field E1CSKSM-LOGSYSTEM from COSMAS IDoc but I gues there must be simpler soloution.
    Thanks for your advices,
    Igor

    Igor :
    I think this has something to do with matching logical system with controlling area in TKA01. Another option for cc's logical system to have no values when outbound ALE is to config V_TKA01_ALE (so it will be transported to the system that has cc ALE to other systems) to have field 'ALE Distribution Method' blank (No distribution to other system).
    This way, when SAP is creating outbound idoc for COSMAS, field CSKS-logicalsystem will not be populated (logic is in SAP 'MASTERIDOC_CREATE_COSMAS' , around line 86).
    Rgds.

  • From R/3 to CRM create one logical system for CRM client 300.

    Suppose i create one logical system for CRM in R/3 TO CRM scenario for client 300.another user wants to work on jdbc to CRM client 300 for this he wants to create another logical system for client 300 it is not possible,so,it is ok if he assign same logical system when he was working for CRM client 300 when he wants to create business system for CRM in JDBC to CRM.

    Hi,
    Business Systems are te logical system name for a CLient in the SAP.
    These can be reused again for different configuration scnario that you must have created for different interface.
    All you need to do is assing the Business system to your configuration scenario and Communication channel to the same.
    Regards
    Vijaya

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • Create a client and logical system for BW

    Hi all,
    Can anyone show me how to create a BW client?
         create a BW client and logical system for BW client.
         create sourcesystems for the other clients in BW.
    I have follow some documents
    B84: BI Connectivity
    B03: General Settings BI Integration
    But it's not working the data can't flow to BW server.

    hi,
    check out the following thread's. it will guide you
    Connection steps for SAP BW and R/3
    Info required  while  creating source system
    R/3 Source system creation error in BW 7.0
    regards
    harikrishna N

  • Internal order - Error - Different logical system for order

    Hello all,
    I try to send IDoc (INTERNAL_ORDER) from system A to system B.
    I have done:
    - BD64 / WE20 / WE21
    But after having customizing I have got following error:
    Different logical system for order xxxxxx
    Message no. 2075ALE001
    Diagnosis
    Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
    System Response
    Internal order xxxxxxx with master system A cannot be distributed in system B.
    Procedure
    Check customizing for ALE for internal orders.
    How to solve this?
    My aim is to maintain internal order master data in test system.
    Thanks for your help.
    David

    I have found something.
    If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
    Then: how to define "master"?

  • Define one logical system for PI or multiple LS for 3rd-party system?

    Hi gurus,
    We are using IDOC2SOAP and SOAP2IDOC scenario in PI7.11. My question is regarding the logical system(or partner profile) on R3 side. We have two 3rd party system:A and B, so we have two choices.
    1. define one single logical system for PI integration server;
    2. define two logical systems for A and B.
    For choice 1, it seems we can only use one business sytem or business component (business service in 7.0) as the two 3rd party system, especially for SOAP2IDOC scenario.
    For choice 2, it seems we have no restrictions.
    Is it correct?Any help will be appreciated.

    technically you can use both options.
    The question is - do you want all the IDOCs in your R3 system to appear as though they were sent from the PI?
    What if a lot of 3rd party systems were sending the same IDOC (for example - ORDERS) and you want to investigate only those who were sent from system A?
    I like it configured that every system will be identified by a name I give it.
    I just use the IDOC communication channel checkbox of "Take Sender from Payload"
    or use a different service in the IBC that has a different logical system configured in its Adapter specific identifiers.
    Hope it helps,
    Imanuel Rahamim.

Maybe you are looking for