Default mode for recording in Captivate 4

I've created a template for recording simulations in Captivate 4, but it seems to be recording in Demo mode, and not creating click boxes, failure captions, etc. How do I set it to default to Training Simulation?
Thanks for any suggestions...

Hi there
Unfortunately there is no way I'm aware of to force a default for this. The Captivate author must choose the type of recording at the time the recording occurs.
Click image below for possibly larger view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

Microphone recommendations for recording into Captivate 4?

Hello. Can you tell me what microphone you use to record directly into Captivate 4 (on Windows XP) that works properly and plays back as it should? I am having audio issues with C4 using a Rode Podcaster. I know it's not the microphone as it works with other applications. I know it is something with C4 and I have tried several workarounds to no avail (such as the one found http://bdld.blogspot.com/2009/03/fixing-sound-in-adobe-captivate.html[L=Link). If you have a microphone you've used with C4 that works, please reply to this post as I would like to see if I will have success with a different mic. Please do not respond here if you have an audio workaround, a .dll fix, or anything else to troubleshoot audio.
Thanks,
Casey

Hi Casey
I use a Microsft LifeChat headset microphone and it seems to work well.
However, I will also toss out a note about something I encountered a few weeks ago in a Captivate class. We were using Intel based Macintosh PCs. Captivate seemed to refuse to record until we first clicked Audio > Settings and specifically yselected the microphone.
Probably won't be that easy in your case but thought I'd mention it. Who knows?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Gnome 3 fallback mode for single user

How is it possible to set the gnome 3 fallback mode as default mode for a single user?
All the other users on the system should stay with gnome-shell as default.
@op

Hi,
You should read the wiki : https://wiki.archlinux.org/index.php/Gn … lback_mode

(Administration - Marketing - Import), you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in

Administration - Marketing -> Import, you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in Business Administration - Marketing -> Import -> Exceptions. Whatever the exception, including duplication import occurs during import and recorded in a text file. What are the fields that determine the duplicity? How I can I can change those?

You will be returned anything that is in the option's value parameter. What is displayed in the dropdown and what is put in the value attribute do NOT need to be the same, so maybe you should start there.

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

Hi Ed
Thank you for contacting me, however I already know how to save text to
audio files via timeline using the Export feature.
So my question was not entirely clear and I apologize for that. To explain
further, whenever I save a text to audio file, captivate takes me to a
default save as folder where I then have browse back to my production
folder where I am keeping all my Txt to Aud files. This is very tedious
process when you have alot of files to save. So my question was is there a
way to configure captivate so I can make my production folder the default
file for whenever I save a Txt to Audio file through Export feature that
the system automatically takes me to that production folder, and I am
spared the long tedious process of saving the file manually to the
prodcution folder I want.
I have copy the pathway to the production folder in the URL filed in the
Save As dialoge box and that workaround as cut the work down but I still
have to paste that URL field to point the file to the right folder. So it
would be nice if I could do everything automatically. Microsoft makes this
capability in their MS Office applications, so I was thinking Adobe might
do the same thing. Your help with this would be appreicated,
Thanks
Merrill Roberts
Sr. Training Specialist
SunGard Availability Services
Direct 925-831-7730
Mobile:415-215-9280

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Edit defaults mode , Preferences for all users.

Hi,
Iam working on an portlet app as part of it am planning to make the portlet application as jsr 168 compliant.
I have few questions regarding the jsr 168 stuff.
a) what versions of Bea portal do support the jsr 168 portlets it is it available for download todo some investigation.
b) This is an question related to preferences - For example Suppose user "A" publshes the portlet and another logged in user views the portlet he should see the same set of preferences or the defaults set by the user "A" . Some portals like Oracle portal achieve this by supporting a mode called Edit Defaults mode. How do i achieve this in a Portal which doesn't support edit defaults but it is JSR compliant. In other words the prefences set by the user "A" should be available to user "B" , how does i achieve this functionality in other portals. Note Edit defaults mode is an custom mode supported by the JSR 168 API it is not a mandatory mode like the Edit, View or Help .
Thanks in Advance.
Mouli

Resending as i havent received any replies. Thanks
Hi,
Iam working on an portlet app as part of it am planning to make the portlet application as jsr 168 compliant.
I have few questions regarding the jsr 168 stuff.
a) what versions of Bea portal do support the jsr 168 portlets it is it available for download todo some investigation.
b) This is an question related to preferences - For example Suppose user "A" publshes the portlet and another logged in user views the portlet he should see the same set of preferences or the defaults set by the user "A" . Some portals like Oracle portal achieve this by supporting a mode called Edit Defaults mode. How do i achieve this in a Portal which doesn't support edit defaults but it is JSR compliant. In other words the prefences set by the user "A" should be available to user "B" , how does i achieve this functionality in other portals. Note Edit defaults mode is an custom mode supported by the JSR 168 API it is not a mandatory mode like the Edit, View or Help .
Thanks in Advance.
Mouli

Can I change InDesign CC 2014 to default to cmyk mode for pantone colors instead of lab?

I work for a large corporation with close to 1000 sales people so we have a POD vendor who manages a website for the sales people to order our literature. Our colors were all great and now with InDesign CC 2014 using lab values instead of cmyk for pantones our colors are off. Is there a way to set InDesign CC 2014 to default to cmyk mode for pantones instead of lab?
Thanks,
Dave

so we have a POD vendor who manages a website for the sales people to order our literature.
The Pantone + Solid ink libraries only have one Lab definition. You can force a conversion to process CMYK via Ink Manger and the converted output values will depend on the document's CMYK profile.
If you prefer a single, device dependent CMYK definition for a solid ink simulation, you now have to use the Pantone + Bridge library—those colors are defined as process CMYK—or you can go back to the legacy solid library

Changing Quiz "Default Labels" for Incorrect Message for Captivate 5.5

Hi Experts,
I am trying to change the "default labels" for incorrect message for my existing Quiz slides. However, it does not get reflected. Is there a way I can change, e.g., the default label for incorrect message from "...press Y to continue" to "xyz" for my existing quiz slide and get that reflected.
Regards,
Roshni

You can change these default labels at Quiz settings > Default Labels > Correct Message and Incorrect Message fields.
However, you need to be aware that changing these label defaults will have no effect whatsoever on the Success and Failure captions that are already present in your project. Only new captions added AFTER the change will display the new text.

How do I troubleshoot Flash Player's protected mode for Firefox?

Starting with Flash Player 11.3, a protected mode was added as a new security enhancement for Firefox 4.0 and greater on Windows Vista and higher. This security enhancement is designed to limit the impact of attacks launched from malicious Flash content (SWF files). For additional details on this feature, please see Inside Flash Player Protected Mode for Firefox
After reviewing this FAQ, we'd appreciate if you would take a minute to let us know if it helped. There is a link to a two question survey at the bottom of the page.
While we believe this feature is fully tested and reliable, if you encounter issues with Firefox we recommend the following troubleshooting steps.
Problem: Flash content does not appear, YouTube display errors such as "An error occurred. Please try again later.", or Flash video will not function properly.
Solution: If RealPlayer is installed on your system, please disable the RealPlayer Browser Record plug-in.
Launch RealPlayer
Click the RealPlayer icon in the upper left corner of the window and choose Preferences.
Choose Download & Recording from the left hand panel
Uncheck "Enable Web Download & Recording for these installed browsers"
Click OK and close RealPlayer
Restart Firefox
If you are viewing this page in Firefox and Flash Player is not working, please click here for an HTML5 version of this video: YouTube HTML5 HD Link
Problem: RealPlayer is not installed, Flash Player crashes in Firefox
Solution:
Troubleshoot Extensions and Add-Ons by launching Firefox in Safe Mode
1. Exit Firefox
2. Click Start > Run
3. Type the following then press [Enter]:
firefox.exe -p
4. Click Continue in Safe Mode
5. Attempt to reproduce the problem
If the problem does not occur in safe mode, please try to isolate it down to an individual plug-in.
1. Exit Firefox
2. Re-launch Firefox
3. Click Firefox > Add-Ons > Extensions
4. Click Disable on all of your extensions
5. Attempt to reproduce the problem, while enabling each extension until you can reproduce the issue
If the issue persists in Safe-Mode, please continue with the steps below:
Some users have indicated that random crashing stops when clearing their Firefox profile. This step will allow you to temporarily test with a clean set of Firefox preferences, without losing your preferences.
Exit Firefox
Click Start > Run
Type the following then press [Enter]: firefox.exe -p
Click Create Profile
Click Next
In the Enter new profile name dialog, type "Test"
Click Finish
Select Test and click Start Firefox
Use Firefox as normal. If the problem goes away, clearing your Firefox preferences, or migrating the important settings (bookmarks, etc) to a clean Profile may be a good permanent solution.
If the problem persists, switch back to your old profile by doing the following:
Exit Firefox
Click Start > Run
Type the following then press [enter]:firefox.exe –p
Choose your old account (typically "default")
Click Start Firefox
Solution: Try a clean Windows profile (You must be an Administrator to complete this step. If your user account is not an admin type, skip to the next section for instructions on reporting a bug.) Creating a new Windows user will rule out any account-specific preferences that may be enabled on your system.
Create a user account in Vista
Create a user account in Windows 7
Use Flash Player normally. If the problem goes away, this indicates a compatibility problem, either with software you have installed or with preferences set on your account.
Reporting a bug:
Please file bugs at bugbase.adobe.com.
Choose "Adobe Flash Player" as the product
Choose "Browser Integration" as the product area
Please provide as much information as possible with what you were doing before the crash and an exact URL where the crash occurred.
If available, please attach your Firefox crash logs to the bug using the Attachments field.
Show hidden files and folders. For more details, see the instructions for the operating system that you use: Vista and Windows 7.
Crash logs are located at C:\Users\username\AppData\Roaming\Mozilla\Firefox\Crash Reports\
Logs will be located in either the pending or submitted folder, depending on whether or not you submitted the crash report to Mozilla.
Last resort
Finally, if these problems are blocking you from using Flash Player we recommend, as a last resort, you either revert back to Flash Player 11.2 or temporarily disable Protected Mode. We strongly recommend that Protected Mode is manually enabled once this issue is resolved.
To revert to a previous version of Flash Player, please see this FAQ: How do I revert to a previous version of Flash Player?
To disable Protected Mode, add the following line to your mms.cfg file located in:
Windows 32bit: C:\windows\system32\macromed\flash
Windows 64bit: C:\windows\syswow64\macromed\flash
ProtectedMode=0
If the mms.cfg file does not exist, create one using any standard text editor (e.g.. notepad)
Depending on your operating system, you might need to first save the mms.cfg file to a writable location (such as your documents or desktop folder) and then copy the file into the destination folder using Windows Explorer.
To re-enable Protected Mode, simply remove the line from the mms.cfg file.
Hopefully this FAQ helped you. Please let us know by taking a minute to fill out this simple survey.
Did this FAQ help?

Please ask your question on a forum for the Flash Player

Set different authentication mode for OWA (without 2 ip address)

hi
http://social.technet.microsoft.com/Forums/office/en-US/fda18a29-a484-4ed5-903b-aa06e8f7a032/set-different-authentication-mode-for-owa?forum=exchangesvrclients
Step 1: IP Address
Obtain a second IP address and add it to the NIC of your server.
Step 2: DNS
Add a DNS entry for That secondary IP address for the name we will want to use in the new FBA OWA Web site. I have chosen "testwebmail." Be sure there is a valid SSL certificate (recommended to have UC or SAN SSL certs) on the server Which has the
new name "testwebmail" that will be used in the certificate.
Step 3: New Web Site
Create a new web site in IIS on the Client Access Server and bind it to the new IP address used in step 1.
Step 4: Adding Exchange Virtual Directories
The web site has been created and bound to the secondary IP address of our server. Also the DNS record That will be used to access the OWA FBA new page was added to DNS. The next step is to go into EMS and begin adding our virtual directories for OWA and ECP.
Login to the Exchange server and open the Exchange Management Shell. Then run Get-Get-OWAVirtualDirectory and ECPVirtualDirectory to see the default OWA and ECP directories.
New-OWAVirtualDirectory -WebSiteName FBA -InternalUrl https://url/owa
New-ECPVirtualDirectory -WebSiteName FBA -InternalUrl https://url/ecp
Step 5: Configure the Virtual Directories
To configure the virtual directories we will disable FBA on the Default Web Site OWA and ECP virtual directories
New-OWAVirtualDirectory -WebSiteName "FBA"
Enable the Basic authentication via running the following command:
Set-OWAVirtualDirectory -Identity "yourservername\owa (FBA)" -BasicAuthentication $true
Set-OWAVirtualDirectory -Identity "OWA (Default Web Site)" -WindowsAuthentication $true -BasicAuthentication $false -FormsBasedAuthentication $true
Step 6: iisreset
I want to set this settings; but I don't have 2 ip address and I want to set whit one ip address.
can please tell me how can set this settings with one ip address?
and please tell me about publishing whit tmg.
thanks

Hi,
Based on my research on Host Header, it seems using Host Header can achive your goal.
More details on Host Headers:
1. Host headers let you assign more than one site to a
single IP address on a Web server.
2. To host more than one Web site on a Web server, you can assign a unique IP address to each Web site, designate a non-standard TCP port number for a Web site,
or use host headers. Of the three methods, it is more common to use host headers than to assign unique IP addresses to Web sites or to use non-standard TCP port numbers.
Configure a Host Header for a Web Site (IIS 7)
http://technet.microsoft.com/en-us/library/cc753195(v=ws.10).aspx
Please correct me if there is anything misunderstand.
However, Microsoft recommends creating the second OWA/ECP virtual directories in a new IIS web site with a different IP address, and using it for internal client access.
Thanks
Mavis Huang
TechNet Community Support

Set default variant for user in ME5A

Hi gurus,
It's possibile to set a default variant for the ME5A transaction for a user? Which parameter I must use in SU01?
Thanks
regards.

There's a way to add entries to that table.
Go to the table ESDUS through SE16N and activate the editing mode by entering &SAP_EDIT in the command field. It will give you information message in the bottom "SAP editing function activated" ("Maintain entries" check box will be visible).
Let us examine the ABAP code for the program behind ME5A
DATA: l_action LIKE esdus_s-action VALUE 'RM06BA00'.
CALL FUNCTION 'ME_SET_REPORT_USERVARIANT'
   EXPORTING
     im_report           = l_report
     im_esdus_action     = l_action
     im_standard_variant = l_variant.
MOVE l_action      TO my_esduscom-action.
MOVE 'USERVARIANT' TO my_esduscom-element.
MOVE sy-slset      TO my_esduscom-active.
Stay in SE16N and in the field "Act." enter RM06BA00 and execute. You'll see all the users who executed the ME5A (a.k.a program RM06BA00) and the default variant SAP selects is "SAP&STANDARD" which is a system variant, in the "Active" field. Change that value to what user want to be defaulted. Keep the value 'USERVARIANT' in the El. field. Click save on the top. It will popup a window records inserted, deleted, changed. Just hit enter.
Now whenever the user executes it will be defaulted to whatever you rewrote in the table.
Caution: Do not use &SAP_EDIT with other tables especially which share common primary keys it can serious problems in your database.

How to enable workprotect mode for unsaved data

Hi,
I am trying to enable workprotect mode for unsaved data and the reason is after entering hours in Record Working Time If the user navigates to other screen ,all the data entered in time is getting lost.
For enabling the Workprotect mode I did the following things
1.Go to system admin -> system config ->service config->Applicaitons ->com.sap.portal.epcf.loader
Change workprotect.mode.default to 2
Restart the config by right clicking on com.sap.portal.epcf.loader . Click Administrate ->restart
and
2.Opened the Personalise option from Masthead and selected workprotect mode and selected
Choose action in popup on unsaved data
But still it doesn't work.
What is missing here
Thanks
Bala Duvvuri

GLM,
I am testing with my own user id and i have set the settings as mentioned above
Thanks
Bala Duvvuri

Which input for recording computer sounds

I have recorded a number of tracks via my Soundblaster Line in input to AA. I have a software drum module which I want to record via AA, but I cant seem to get AA to register this input. It's not inputting via any line/mic/etc input, as it is on the computer already. Am I selecting the wrong input? I have tried a few of them on the list and none seem to work. Any ideas? Thanks.

If I open the Creative Audio Console, it has an option to record. You can select input for the recorder, and if I select "what u hear" then the equaliser bars respond to the drum software. However, in AA I cannot find an option to record "what u hear" or any equivalent - all the inputs seem to be for external sources (line in, digital in) and a few I don't understand (mix FL, mix RL) - if I choose these two latter ones, I get a sudden crescendo of feedback which causes the input level monitors to go into the red and cut out.
Update: I went into AA audio hardware setup and selected "Audition 3.0 windows sound" as the audio driver. The only output available is "SPDIF out". Now, I am able to select "what u hear" as a recording input!! HOWEVER, when I click "arm for record", I get the error message:
Adobe Default Windows Sound Driver
Device: SPFID Out (Creative SB X-Fi)
Errorcode: FFA-8-000D [800705aa]
Info: Playback failed. The audio system does not seem to respond. Maybe card does not support full duplex mode.
I am now able to record computer sounds, though I cannot hear the recording nor the playback when I am finished. If I set the device back to "Creative ASIO" then I am able to hear what I recorded.
My soundcard is a Creative 7.1 X-FI Elite Pro, which supports full duplex.
Would really appreciate any help !

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

Default mode for recording in Captivate 4

Similar Messages

Maybe you are looking for