Default number of rows

Dear all,
How to change default number of rows in a report wchih appears after come out ? Any solution ?
M.
Edited by: 1002519 on 2013-04-25 07:59

Hi,
Even am using 11.1.1.5
what you do is click on results tab of the analysis >> so here it will display either table or pivot table view >> click on edit of the table or pivot view >> it opens in edit mode >> on top you can see another properties button with xyz symbol >> click on it there you an see Rows per page text box enter as per required and save the report.
Mark if Helpful/correct.
Thanks.

Similar Messages

  • How to change Default number of rows displayed in a Briefing Book

    Hi,
    We have a requirement to deliver a dashboard containing 7 dashboard pages to the business users.
    To achieve this, I have created a briefing book by adding all the required dahboard pages and scheduled an agent to deliver the briefing book in PDF format. However, the briefing book delivered by the agent shows only 25 rows for all the analysis (reports) included in the dashboard pages.
    I have already made the following settings:
    1. At the report level, edited the table view property to show 150 Rows Per page.
    2. At the dashboard page level, edited the PDF and Print properties to Print All Rows.
    3. Edited the instanceconfig.xml file to include the following tag under <Table> tag: <DefaultRowsDisplayedInDelivery>15000</DefaultRowsDisplayedInDelivery>
    Please advise if there is any setting which can help in increasing the default number of rows in a Briefing Book (OBIEE 11.1.1.3).
    Thanks & Regards,
    Sumit

    Hi,
    This is a bug in 11.1.1.3
    Bug 12671370 - BRIEFING BOOKS DO NOT SHOW ALL ROWS
    As a workaround, you may want to click on the "Display Maximum(500) rows per page" button on the dashboard page before you download to Briefing books.This will work for reports with less than 500 rows.
    Rgds,
    Dpka

  • Changing the default number of rows displayed in a interactive report

    Hi,
    I have a sql query based interactive report but i cant change the default number of pages i.e 15.
    is there any way to change the number of rows displayed.
    Thank you,
    rakesh

    Hi,
    That was very useful document that you shared, yes that is correct we can so it this way but there is another way doing it where in if you go to the report attribute section and in that there is Layout and Pagination and under
    that you can fix the number of rows, and over there we can also accept values from page item such as if the page item value changes the number of rows displayed in the report changes dynamically.
    In my report i get only pagination but not a option for layout.
    Any help will be appreciated.
    And also where i can get the links to the similar document that you have shared ?
    TY
    rakesh
    Edited by: rakesh119 on Apr 30, 2013 12:10 PM

  • Interactive report - default number of rows

    I am using APEX 3.1.1 and can not find a way to change the default of 15 for the "number of rows" returned when initially displaying an interactive query. Have I missed something?
    It is certainly easy enough using "Layout and Pagination - Number of Rows" for a non-interactive report region.
    thanks Peter

    Hi Peter,
    In the report definition, there is a section headed Default Report Settings. This shows the instruction:
    To create default report settings, run the report as a developer, modify the settings (like hiding columns, adding filters, etc.), select Save Report from the Actions Menu and then save As Default Report Settings.
    The default row count is one of those settings - make sure you Run the report before saving.
    Andy

  • How to set default number of records shown in an interactive report table?

    How can I set the default number of rows shown on an interactive report?
    The default seems to be 15, I can't find where this can be changed.

    Hi John,
    When you're logged into the development interface, run the page with the IR. Set the rows from 15 to 5 (for example) and click "GO". Now click on the Actions Menu icon (the green gear), click "Save Report". "Save as: As default report settings". Click Apply and your rows will be set.
    Martin
    [http://apex-smb.blogspot.com/]

  • Get the number of rows returned by a dataProvider

    hi
    I am using a [Bindable] variable that I am setting and using
    as a DataProvider (coming from a web service) for a DataGrid within
    my Flex 2 application.
    is there a way of knowing the amount of rows that the
    dataProvider is returning???
    as I want to do a calculation to set the height of the
    dataGrid depending on the amount of rows being returned by the
    dataGrid!
    any suggestions...?
    Thanks,
    Jon.

    that only seems to count the default number of rows (height)
    of the datagrid..... i.e. 7.
    I need to know the number of rows being returned from the
    dataProvider - i.e. the number of rows coming through the
    webService from the database etc.....
    Thanks,
    Jon.

  • Number of rows in an EVS dropdown

    Is there a way to control how many rows are displayed in an EVS dropdown? We have a couple instances where the number of entries is 1 more than the default number of rows displayed. This forces our users to have to navigate to 2nd page of rows just so they can see the last row.
    Any help would be appreciated.
    Thanks!

    Hey Armin. Thanks for your reply. I suspected that would be the answer.  : (
    Good suggestion about OSS. Don't know why I always forget that.
    Thanks again.

  • 0ANALYZER Web Template - increase number of Rows displayed

    Hello All,
    Is there a context menu command / popup value  that will allow an end-user to increase the *default* number of Rows displayed at a time (25)  when we are using the 0ANALYZER Web template?
    We have about 100 characteristics anyway, so setting the displayed "chunks" of Rows to say 50 at a time would be quite reasonable.
    We do not want to customise 0ANALYZER web template (and therefore any solution to add any extra buttons/JScript won't be acceptable)
    Any ideas 0ANALYZER experts?
    Thanks
    Ian

    Hi Ian,
    My suggestion is that you make a copy of 0ANALYZER_PATTERN web template say ZANALYZER_PATTERN and make this your default web template. Now in the properties of your analysis grid of ZANALYZER_PATTERN, you can change the number of displayed columns and rows. But again this will be appplied to all web queries using this template.
    If you want to change number of rows and columns dynamically, why not ask SAP netweaver team.
    Thanks.
    Sheo

  • How to increase number of rows display in ESS

    Hi All,
    how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
    Thanks all
    Murty

    Kalpesh,
    it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
    Thanks
    Murty

  • About the number of rows used to map data in Xcelsius

    Hi Everyone:
    I am using web services to fetch data into Xcelsius. The information I got from web service will increase in time and what I suppose is when I run out of rows to get all data I must open my Xcelsius model and select a greater range of rows on each component to get all the data that the web service is bringing.
    Is there an alternative to avoid modifying ranges of data in crontrollers when rows mapped are not enough for the data you are fetching from a web service?
    It is a bit confusing, I hope I've been clear enough. I really really will appreciate your opinions. If possible give me technical explanations.
    Thank you,
    Skull
    Edited by: skull_buck on Aug 6, 2009 7:40 PM

    Hi Greg
    Thanks for your fast reply.
    What you suggested is exactly what I am doing now, and also I increased the number of rows allowed to map en Xcelsius which are 512 by default.
    I would like to know now, how many rows are advisable to increase? Because I am using some components and you must specify for each one a certain number of rows.
    I test mapping 3000 and even 6000 rows but the model is too slow and I was not able to export the swf file in any format.
    Thank you again,
    Skull

  • How to set number of rows in "Rows Per Page Selector" in Interactive Report

    Hi Guys,
    Is there any way to set the number of rows in "Rows Per Page Selector" in Interactive Report. By default it is set to 15.
    I know one way is to change the number of rows when you are running the report and then set that as 'Default Report Setting'.
    If anybody is aware of any other way, please let me know.
    Cheers,
    Ashish Agarwal
    http://www.dbcon.com.sg

    Hi Pavel,
    can you please specify your question more clearly. If you are on NW 7.0 you can determine a number of colums for your filter item with following command:
    COLUMNS
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
    If you meant the amount of rows within the analysis item you can use following command within your analysis item:
    BLOCK_ROWS_SIZE   (numbers of rows displayed at once)
    BLOCK_ROWS_STEP_SIZE  (numbers of rows to be scrolled for one step)
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/76/489d39d342de00e10000000a11402f/content.htm
    Brgds,
    Marcel
    Edited by: Marcel Landsfried on Feb 10, 2009 7:45 PM
    Edited due to wrong url

  • How to increase number of rows displayed in Essbase drill-through report?

    Hi
    By default, the maximum number of rows per Essbase drill-through report (via Integration Services) is set to 1000. Could anyone tell me how to change this limit please?
    Regards
    Chandra

    Is this for an EIS drill through report that drills through to get RDBMS data, using spreadsheet add-in for example? If so check and see if "Maximum rows per query" in EIS is currently set at 1000 and try to increase it. (I don't recall hitting a 1000 limit in the past, perhaps your report is set at that? or if this is through Web Analysis maybe WA is governing it)
    To set/change a query governor in EIS:
    1     In the Drill-Through Reports dialog box, select a report name.
    2     Click Edit to open the Report properties dialog box.
    3     In the Report properties dialog box, select the Governors tab.
    4     In the Maximum time per query (in seconds) text box, enter the maximum query time.
    For example, to stop a query that takes longer than 100 seconds, type 100.
    5     In the Maximum rows per query text box, enter the maximum number of rows to retrieve.
    For example, to stop a query that retrieves more than 200 rows, type 200.
    6     Click OK.

  • How to limit number of rows(pagination) in the bam report?

    Is there anyway i can limit the number of rows in a report in BAM 10.1.3.4 ?

    In BAM 11g
    There is a property ElementsCountLimit which is configurd in BAMServerConfig.xml
    The number of change lists that are cached before rewriting the cache file.
    The default value is 50. When the 51st change list is received, it is cached by replacing the 1st change list.
    Default: 50

  • ORA-01422 exact fetch returns more than requested number of rows on invoice

    Hello developer,
    Current I m facing problem ORA-01422 exact fetch returns more than requested number of rows in Invoce Standard form when we select PO_Default invoice type for some specific PO Number not for all. I m not able to handle the error bcoz im new in oracle apps. it's urgent for user requirement. Plz guide me how to take approch to handle the situation.........
    select Po_Default invoice type=>enter po number=>press ok button=>got error ORA-01422
    I got query from POST_QUERY TRIGEER like
    function get_po_number (l_po_number varchar2,l_vendor_id OUT number) return number is
    l_po_header_id number;
    --Bug fix:1096002
    --Removed the function call UPPER from the WHERE clause so that the query
    --becomes case sensitive.
    -- BUG 2519682 vendor_id added in the Select statement and futher in the fetch statement
    cursor po_number_cursor is
    SELECT po_header_id,vendor_id
    FROM po_headers
    WHERE type_lookup_code IN ('STANDARD', 'BLANKET', 'PLANNED')
    AND approved_flag = 'Y'
    AND segment1 = l_po_number
    -- Bug 2289727. Enhanced Matching Controls to Finally Closed POs
    AND (NVL(closed_code, 'X') <> 'FINALLY CLOSED'
    OR :parameter.show_final_closed_po_flag = 'Y')
    AND PCARD_ID IS NULL; --bug4627502
    /* Commented out since this is not relevant even if executed.
    AND (segment1 LIKE SUBSTR(l_po_number, 1, 2) || '%' OR
    segment1 LIKE SUBSTR(l_po_number, 1, 1) ||
    SUBSTR(l_po_number, 2, 1) || '%' OR
    segment1 LIKE SUBSTR(l_po_number, 1, 1) ||
    SUBSTR(l_po_number, 2, 1) || '%' OR
    segment1 LIKE SUBSTR(l_po_number, 1, 2) || '%' );
    begin
    open po_number_cursor;
    fetch po_number_cursor INTO l_po_header_id,l_vendor_id;
    close po_number_cursor;
    return(l_po_header_id);
    end get_po_number;
    plz help me how to resolved this issue it's urgent.
    thanks in advance.........

    This bug is documented in the following note on metalink.oracle.com
    APXINWKB - Creating PO Default Invoice Errors with ORA-01422 Exact Fetch Returns More Than Requested Number Of Rows [ID 946578.1]
    The solution is to apply patch 8765847.
    Hope this answers your question,
    Sandeep Gandhi

  • Report Script - How to get the total on the any number of rows selected

    Hi,<BR>I am using Essase and report script for the reporting purpose. In this i would like to know how to get the sum of all the rows selected. I know we can use the calculate row, but it has to be done with print row to display the newly created row. But i am using alphablox where this print row is not working. Is there any other alternative is there to get the sum of any number of rows, and displaying them??<BR>Please help me.<BR><BR>Regards<BR>R.Prasanna

    Pls check the structure and index.
    EMP_ID NUMBER(9) NOT NULL,
    EMP_CD           NUMBER(3),
    EMP_NO VARCHAR2(250 BYTE) NOT NULL,
    FROM_EFF_DT DATE NOT NULL,
    TO_EFF_DT DATE,
    CREATE INDEX IDX_EMP_NO ON EMP
    (EMP_NO)
    NOLOGGING
    TABLESPACE INDEXES
    PCTFREE 20
    INITRANS 10
    MAXTRANS 255
    STORAGE (
    INITIAL 56K
    NEXT 1784K
    MINEXTENTS 1
    MAXEXTENTS 2147483645
    PCTINCREASE 0
    FREELISTS 4
    FREELIST GROUPS 1
    BUFFER_POOL DEFAULT
    NOPARALLEL;

Maybe you are looking for