Default page display HUGE

Just installed Firefox for Windows8. The default page display is, I'm guessing, 140%. I actually have to zoom out to get them to a normal size. Is there any sort of settings option that will let me set a smaller default display for web pages?

hello adrirho, please make sure that your operating system is set up to display elements at 100%: http://windows.microsoft.com/en-us/windows/make-screen-text-larger-smaller#make-screen-text-larger-smaller=windows-7

Similar Messages

Adobe acrobat pro x change the program's default page display to single page view - Windows 8, HP La

adobe acrobat pro x change the program's default page display to single page view - Windows 8, HP Laptop

Since there were no answers, I will take a stab at a reponse. For the 2nd method, I suspect you could simply select the print or press job options to get the desired results or turn off "use local fonts" in Acrobat. If you check the font list, the fonts are probably not embedded and that is likely the problem.
I noticed that you have both Reader and Acrobat installed and that might cause some conflict, but should not be the issue here. If you were to uninstall Reader, you would have to repair Acrobat. The conflict here is that you might have problems with the one opening when you want the other. If it works for you, then don't worry about it.
For technique 1, I suspect you may be using IE 9 that has apparently been a problem since it came out. I have refused to install it. However, it may simply be that PDF Maker does not work correctly with your browser, or got deactivated and needs to be allowed to run in your browser (IE I am assuming).

2 Page Display

I use the free version of Adobe Reader X, then, trying to change it to 2 page display, I do Edit>Preferences>Page Display>and change "Automatic" to "Two Up Continuous" but no change takes place, and it is still one page at a time, one above the other.
Do I have to reboot to get changes to Apply?
[I have trouble re-establishing my Internet connection whenever I reboot].
Thank you for your suggestions.

Hi Alchesay121,
You don't have to reboot the system to get changes to be applied.
The only thing required is to close Adobe Reader and any PDF opened in browser and then on opening the PDF again, it will display two pages at a time.
If this doesn't work even then, then there could be two reasons behind it:
1. Go to Edit->Preferences->Documents-> UNCHECK the option: Restore last view settings when reopening documents.
2. The PDF was created with a default page display option rather than automatic. To override it go to Edit-Preferences-Accessibility- CHECK the option: Always use page layout style and select the layout.
-Nikhil

UCM 10g - default page after login - using port 80 instead of 443

Hi,
We have old instance of UCM 10g, which we have to move to new servers. I made the filesystem move + configuration of IIS (we use IIS as webserver).
We use clustered mode - 2 UCM application servers, 2 IIS servers. We have a load balancers for IIS servers and a load balancer for UCM app servers. IIS itself listens on pure http 80 port. We access UCM via dns name which is resolved as a loadbalancer for IIS IP address. This loadbalancer forwards pure http (80) to IIS servers.
Everything works for me except on thing: Once user log in, there should be default page displayed, where simple search form appears. There I am getting:
"Firefox can't establish a connection to the server at ucm.our.domain:80."
I do not know why does it use port 80. Once I am logged in, when I click "Home" Link then the simple search screen appears correctly. So the problem is only with page displayed after log in.
I am tired for reading config files, trying to change/add some parameter and I am stuck here.
I would really appreciate some help. Any ideas from anybody?
Edited by: stando on Jul 9, 2012 5:19 AM
Edited by: stando on Jul 9, 2012 5:19 AM

Hi Hendrick,
Its a common problem i did face it.
one of the following link can guide you.
How do I enable Java in my web browser?
Solving Common Applet Problems (The Java&trade; Tutorials &gt; Deployment &gt; Java Apple…
Please let me know still if you face any issue..
Thanks,
Rajendar Pilli.

Book default page doesn't display

I have a portal with several books with a few pages each. the books are tied to a single level menu across the top, the pages are all set to no navigation. The "Return to default page" is set to true and a default page is set.
The problem is that after I initially load the book, if I navigate to another page in the book and then try to get back to the book (using an anchor tag and render:pageUrl or by navigating to another book and then back again) the default page never shows up again. I can get it if I access it directly with pageLabel=pagename, but pageLabel=book doesn't work.
I have tried setting up pageChangeEvents in the handlepostback of the book, but to no avail. The default page just never shows up again.

As I am sure that you know it is tough to dissect portals to send good examples... I do have some more information. I turned off Tree Optimization and it has had a partially positive impact. Now when you navigate between books via the single level menu the default page loads, albeit notably slower.
Where it doesn't work is where my manual book links rendered in the children pages do not reload the default page for the parent book.
Let me explain this a little: I have pages within books, each page is in two column layout with a menu on the left. The top menu item on the left is a link back to the parent book (which should display the default page). This link does not reload the default page, it remains on the current page, the url in the navigation bar clearly contains the book url.
The urls for the single level menu and my custom book link appear to be identical, but one works, the other doesn't:
<i>http://localhost:7001/v2portal/modine.portal?_nfpb=true&_pageLabel=modineNewsRoom</i>
I have tried _nfto=false, but that hasn't worked either.
It is almost like the portal isn't sending control up high enough on the tree to recognize what it really needs to do, which is re-render the book.

Errors displayed on the default page

Hello:
When I launch EM, the default page shows two errors, one below the HOST CPU and the other under Active Sessions:
The one under HOST CPU Says:
Error
Unhandled exception during generation of chart Host CPU.
java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
The one under Active Sessions says:
Error
Unhandled exception during generation of chart Active Sessions.
java.lang.NoClassDefFoundError
at sun.java2d.loops.DrawLine.locate(DrawLine.java:37)
What do they mean and how do I resolve these?
Thanks.
Venkat

I have seen such errors before (especially when the CPU was very busy). Log off and log back in.
It should fix the problem. If the error persists, reboot your machine as a last resort.

Change default page size in iWeb?

Is it possible? How do you do it?
At the moemnt I am having to adjust each and every page manually and that takes ages.
Will
http://web.mac.com/digitographer/iWeb/DementiaScotland/Home.html

I am using a software called iWebsites which can change the default page. This way I can open another new page making it the default preference and possibly change its size. Normally, I get the size thing correct in the first place. Some images survive well as gifs while others are retained as jpgs. I don't oversize my pixs. It's just for display ...
Joe

Can Reader pick up the Default Page Size of a printer that is not the Windows Default Printer?

We have a web based application that generates PDF documents via Crystal Reports.
We are using Adobe Reader 8
The PDF pages are displayed within an Internet Explorer window where the the users then print the document.
The application is designed so the user only gets one chance to print the document (ie they cant come back and change printer settings if they happen to print the document out incorrectly)
The document needs to be printed on A3 paper, full duplex.
We have a printer set-up decidated to the printing of the documents generated by this application. The default page size of this printer is set of A3.
If we set this dedicated printer as the Windows Default Printer we have no problems at all. The default page size (A3) is picked up and the document is printed correctly.
If any other printer is set as the Windows Default Printer (eg one that has a default page size of A4), the users must obviously select the correct printer from the Print Dialogue Box -however when the user selects the dedicated A3 printer, the page size remains as A4 (page size of the Windows Default Printer). This means the user must remember to change the paper size to A3 each time.
Out users find IT a struggle at the best of times - anything that makes the process simpler is very welcomed!
Is there a way to ensure the default page size of the printer is respected when that printer is not the Windows Default Printer?
Thanks!

No.

Link to Content Area from ASP page brings up default page

I have a link on an ASP to the content area. When the user clicks on the link, he/she is required by the portal to provide their username/password. After entering the correct information, the users are displayed their default page NOT taken to the content area.
Any ideas?

Unfortunately, the only way to do this would be to not show the sub-folder region and add URL items in another region that link to the folder page in question.

Web IC default page in CRM

Hi,
I have few questions and can you please clarify them as soon as possible.
1>How & where can i set to display my default page in CRM IC WC when user logon? Is it in SICF tcode?
2>Is there any config to be done in CRM (any setting in SICF or SSO2) to get MYSAPSSO2 cookie when i call my BSP application from EP?
i read the blog /people/siddhartha.jain/blog/2005/10/25/reading-netweaver-portal146s-logon-ticket-147mysapsso2148-cookie-in-bsp-applications but it was too specific to NetWeaver.
3>What is view name that displays the navigation bar left side in the IC WC.?
I would appreciate your help and ofcourse awards as well.
thanks,
MacS

Dear Macs,
For your issues:
1. the default page in CRM IC is default.htm which interns call default2.htm then profile_determ.htm
if you want to display your own page in IC WC, you will have to create a new controller & view and then place the view name StdWorkareaOccupation.xml of repository CRM_IC_RT_REP
2. if SSO implemented, then you can just have to add url of your BSP in EP.
BR, Subba.

Apex tab and page display query

I am using Apex 4.1
I have the following tabs set up.
Home, Tab 1,Tab 2 and so on
The home page is fine. Now the query is with regard to Tab 1. I need it to display Page 3 or Page 4 based on the location of APP_USER
The region details are all stored in the table : employee_info
How can I check or display Page 3 if the Region is APAC and Page 4 if EMEA(APAC and EMEA being values in table)
Is there some way how I can set or achieve this? The default page I have set is as of now Page 3 but it has to pick Page 3 or 4 based on region value from employee table.
Any guidance will be appreciable.
Thanks,
Swetha

LKSwetha wrote:
I am using Apex 4.1
I have the following tabs set up.
Home, Tab 1,Tab 2 and so on
The home page is fine. Now the query is with regard to Tab 1. I need it to display Page 3 or Page 4 based on the location of APP_USER
The region details are all stored in the table : employee_info
How can I check or display Page 3 if the Region is APAC and Page 4 if EMEA(APAC and EMEA being values in table)
Is there some way how I can set or achieve this? The default page I have set is as of now Page 3 but it has to pick Page 3 or 4 based on region value from employee table.
Any guidance will be appreciable.Create 2 copies of Tab 1, one for page 3 and the other for page 4. Display them conditionally according to the user region.

Page Display Resolution

Windows 7. Illustrator CS5. Acroabt Pro X
An artist created a document in Illustrator which has embedded screenshots. Screenshots are 72 ppi and not scaled.
He sent me the AI file and I saved it from Illustrator as a PDF and then viewed in Acrobat.
At 100% zoom, the page shows larger in PDF than in Illustrator. Making the screenshots look rather blurry.
After some exploring I found a setting for Page Display Resolution. It was set to custom (I cant remember the ppi, but perhaps 110?). My other choice was system setting (96 ppi). That was too be as well. So I changed it to 72 and now its fine.
So I kinda understand where they are going with it. However, this is a Program setting, right? Not a document setting. Is there any way to set something like this so that anyone who gets this PDF will see the images at the right resolution at 100% zoom?
Maybe there is something else going on here that I dont get...
Thanks
kaz

You should be able to set that in the creation process. There is a display resolution in the Adobe PDF printer properties under the Advanced button. The default is 1200 dpi.

Page display resolution setting

Many or all CS5 apps would benefit from the same kind of Page Display preferences that Acrobat Pro provides. It allows you to set page display resolution at the pixels per inch setting that will display content at true actual size (100pct viewing). By that I mean an 8.5x11 page on screen is the same size as an 8.5x11 page in your hand. It may be that Acrobat's default "Use system setting" figure (81ppi on my display) is all that's needed to get reasonably close, but InDesign, Illustrator, Photoshop, etc., don't have this ability. And Acrobat can be setting to any ppi that gets the job done. Print designers, especially, need true actual size to have a better feel for the scale of the physical piece and design elements on it, notably including type.

That's a fair answer to a load of nonsense ...
1. The original poster was not concerned about pixels, and in fact showed by his very feature request that he was acutely aware of the difference between pixels and real, actual, physical dimensions. The OP did not ask for, nor does he want, measurement in pixels -- in fact, he wants the exact opposite.
2. There is no measurement unit called "pixel". A "pixel" is not a defined distance, and there are no online conversion tools to convert between picas or inches and pixels. If there are, they are a load of nonsense as well.
3. Good news is that CS5 has, yeah!, "pixels" as measurement units. But ... since the pixel is not a really existing unit of measure, it's of no use at all and you might as well pretend (in your mind) what CS5 pretends on the screen: one pixel equals one point.

Page display pblm with styles

Hello
I have an html file in an application directory of Tomcat.
When I open the file in a browser(like File->Open..), the page display is correct.
I mean it takes the Scripts, Styles directory into consideration and displays correctly.
But when I open this html file using http://localhost:8080/myProject/abc.html , it displays the page
with all controls like buttons, textfileds etc. However it is not shown based on the style
specified in the Styles folder.
What could be the reason?
Note: This application is copied from some other system and the style reference is correct. i.e:
<LINK rel="stylesheet" type="text/css" href='../style/default.css'> and the style folder is in the parent directory
Pls help

Oops!!! Got it corrected.
The problem was this : <LINK rel="stylesheet" type="text/css" href='../style/default.css'>
and the folder name was Style.
thnx

Page display pblm

Hello
I have an html file in an application directory of Tomcat.
When I open the file in a browser(like File->Open..), the page display is correct.
I mean it takes the Scripts, Styles directory into consideration and displays correctly.
But when I open this html file using http://localhost:8080/myProject/abc.html , it displays the page
with all controls like buttons, textfileds etc. However it is not shown based on the style
specified in the Styles folder.
What could be the reason?
Note: This application is copied from some other system and the style reference is correct. i.e:
<LINK rel="stylesheet" type="text/css" href='../style/default.css'> and the style folder is in the parent directory
Pls help

Oops!!! Got it corrected.
The problem was this : <LINK rel="stylesheet" type="text/css" href='../style/default.css'>
and the folder name was Style.
thnx

Default page display HUGE

Similar Messages

Maybe you are looking for