Default Page Template for Portal Page Group

Release 2 of Portal (9.0.2.2.22)
Created a page group and several templates.
Edit Page Group Properties, Configure, locate the Default Page Template drop list.
The drop list has only the templates from the shared object page group.
The online help states
=======
Choose the page template to apply to new pages in this page group if the page designer does not explicitly choose one.
Note: This list includes all the page templates in this page group and the shared objects page group.
========
I have several templates in this page group. Why don't they show in this drop list?

You have to make the templates public. Edit the template properties - on the Main tab click "Make Public".

Similar Messages

How to set different default interactive reports for different user groups?

I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
Thanks

You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

How to define a standard web template for a specific group of queries?

Hello experts,
I had to enhance the standard web template 0ADHOC and saved it as ZADHOC.
Then in SPRO t-code I defined it as the standard web template. The problem is: it started to be the standard web template for all the company queries.
Is there a way to define it as standard only for the queries of my project? Like adding some parameter in the web link only for my project queries?
Thanks in advance,
Helder

I have figured out how to slice it up myself, however it appears as though I have to do it all manually, drawing each box myself.
Yes, that's how it will have to be. There is no pertinent slicing in the PSD.
This will result in either ALLOT of work making sure that each box is perfectly aligned with the one before it, or uneven slices.
I am obviously doing something wrong.
Yes, you are not using guides. You know, those cute turqoise lines of which the document already has a few when opening it...
As for everything else - the template is simply rubbish. It's poorly organized and mostly unsuitable for building a website template right off the bat. Your work needs to start there by properly grouping items to mimic button states and then exporting them in two passes. And then there's things like this large dummy text etc. that simply don't make sense. Anyway, even if it sounds liek the same record over again: The biggest failure of any such work is to assume that PS could even spit out a working web page. All a web designer would use it for is to extract the graphical elements, but teh rest would stil lbe designed properly with standards compliance in mind in a web design app...
Mylenium

How to change the default print template for broadcast PDF Export

Hi,
I have currently designed a print template for printing purposes and use this as the template for the print button(Export to PDF),if i were to click on this button the output pdf is the desired PDF. But if i were to broadcast the template with output format as PDF it picks the layout of the current template, how do i set broadcast to pick up the print template also???
Further how to insert a page break in a PDF print template.

Hi Nagesh,
These setting are for
1.Adhoc Template for Queries
2. Adhoc Template for reports designed through report designer
3. Template for query precalculation
4. Template for displaying broadcasting wizard.
When we use broadcasting from query designer to email PDF's the system uses 0QUERY_TEMPLATE_BROADCAST_PDF.
From WAD the system uses the current template layout as PDF Layout.
P.S: OSS note 1054460 -<b>Depending on the BI object type and possibly other criteria, different Web templates are used in BI broadcasting to generate PDF (and PS or PCL) formats:</b>
<i>For Web templates: the Web template itself is used</i>

Setting up Default web template for BeX 7.0 queries.

Hi Experts,
I am running a web-report based on a query created using Query Designer 7.0. I have a default web-template that I have been using for BeX 3.x queries [which has been created using WAD 3.X] and I tried to set the same template as default for the BeX 7.0 in SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BeX Web>Set Standard Web Templates>Ad Hoc Analysis.
But I can't see the changes being reflected in the web report after I made the change.I still see that the default template 0ANALYSIS_PATTERN is being used. Can we set a web template created using WAD 3.x as the default template for 7.0 Queries?If yes, do I need to do something else apart from the changes I did in SPRO?
Thanks
Arvind
Edited by: Arvind Pattabiraman on Apr 29, 2009 8:51 PM

Arvind,
Have you migrated your template to 7.0 ? you cannot use a 3.x template as the default for a 7.0 template... unless you are using the EP6.0 iView / ABAP stack for running your queries on the web...
Edited by: Arun Varadarajan on Apr 30, 2009 12:29 AM

Question regarding the default web template for queries

Hello,
I am trying to learn the default web template that is using for queries:
0QUERY_TEMPLATE_BROADCASTING70
I see that it's <bi:QUERY value="" /> is empty which is logic since the query will be inserted on runtime. My question is, where in the web template does it say that? I can't see any parameter it expects to get with the query's technical name not at the webtemplate code nor at the URL...
Roy

Roy,
I think you are mixing things. The template you are mentioning is used for queries that are executed from the query designer. It's not a web template as any other one you create for your users. So, this web template has some parts in it's code that works with the query execution. When you run a query, the system takes the query definition (made in QD) and executes it with the web template indicated for the query. This determination is made by the program that is used to run queries. You can try using RSRT transaction to debug and check how this it's done. If you want to change the default web template used by query designer to run the queries, you should do it copying any standard template, like the one you mentioned. If you don't do it, you won't get the information correct.
Hope this helps.
Regards,
Diego

Urgent!! Default query template for all users.

Hi Guys,
How do I set the default template for queries for all users.
I saved the default template and did the setting settings>query on embed>use the default template. So the template eorked for me.
But when a different usre tried, the template did not load for him.
So is there a specific setting that can be done so that it apllies for all users.
Thanks
simmi

Hi Simmi,
There is a way that you can do this. Check this post for details as provided by Prakash:
Re: Permanent BW Excel Template
Hope this helps...

Default User Template for AD users with Win home dirs

Hi all,
Can anyone tell me if it's possible for AD users with Windows based home directories to get a default user template given to them the first time they login to a Mac bound to AD?
I can give local users and users with home dirs on our Xserve my default user settings via the English.lproj template, but I cannot for the life of me get this to work for those users with Windows based home directories.
This is a biggie since my boss has mandated that ALL our student home directories are to be hosted under Windows from now on...
Thanks in advance.

So you are using roaming profiles on AD and when they log into a Mac you want to setup their default, is that what I am hearing?
You will need to modify the English.lproj on the local machine to setup the default template. Since the mac server is not involved in the authentication and hosting of a roaming AD account with windows home folder, the client creates the home folder initially. Modify the default English.lproj on the clients.

How to set default Web Template for BEx Query iViews in Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE

Hi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Edit the task flow which is default in template for top navigation

Hi,
Where can I get the the default task flow file (i. e. spacesNavigationPanel) for collaborative with top navigation template?
I want to edit the task flow for navigation.
Thanks,
A

Here are the steps to find the default task flow file (i. e. spacesNavigationPanel) for collaborative with top navigation template :
Note: I am assuming you're using Oracle WebCenter Portal 11.1.1.8.x
Goto Portal Builder - Assets tab localhost:8888/webcenter/portal/builder/administration/assets
Select Page Templates under Structure from left side pane and you'll see list of out of the box page templates (source not editable) and custom page templates (source editable) on the right side pane.
Take a copy of the existing 'Collaborative with Top Navigation' page template
Select the row 'Collaborative with Top Navigation'
Click on Actions -> Copy
Change the display name (Default : Copy of Collaborative with Top Navigation) and description if needed.
Click OK to create a copy of 'Collaborative with Top Navigation' page template
Select the row w.r.t. newly created page template Copy of 'Collaborative with Top Navigation'
Click the checkbox to make it Available (Optional if you want to use this template later)
Click on Actions -> Edit Source to edit the source of selected page template.
You'll see template code in the window (by default).
Click on 'Page Definition' tab at the bottom of the template code window i.e. Switch to Page Definition tab.
Under Executables, you can see the taskflow code w.r.t. spacesNavigationPanel as follows : <taskFlow id="spacesNavigationPanel" taskFlowId="/oracle/webcenter/webcenterapp/view/taskflows/navigation/SpacesNavigationTopPanelCollaborative.xml#SpacesNavigationTopPanel" Refresh="ifNeeded" activation="deferred" xmlns="http://xmlns.oracle.com/adf/controller/binding"/>
I hope it answers your question.

How To Change Default Expiration Date for Portal User in Linux and Windows?

Hello,
I have a couple of environments I recently installed:
1. Oracle Application Server 10 Release 2 (10.1.2) SEOne on Windows
2. Oracle Application Server 10g Release 2 (10.1.2) Enterprise Edition on Linux
I heard the portal and orcladmin user passwords will expire in about 60 days. I want to prevent this from happening. How can I set the expiration date to never expire for both these users? Or at least give me some warning?
I heard that you can do this through the Oracle Directory Manager. However, I am unsure as which server to enter on the field. I've used the following:
<servername>.hostname.com/389
<DBname>.hostname.com/389
They say 389 is the default port. Since I did not really
Does anyone have any ideas?

You have the answer in yours hands:
Search for "60 days" in the forum
How can I enfore Password Expiry Without Lockout?
for instance.
For the servername, it's the name of your server and the port is depending of your platform (have a look to $ORACLE_HOME_INFRA/install/portlist.ini) and
chech the value for: Oracle Internet Directory port
Patrick.

Row Template for Named Report - Grouping required

Hi,
My report should show like
Assigned ID Date Description
To
ALAN01 12345 23-JUN-07 This is the desription
Entry Date :23-JUN-07 Entry Text:Pass to ABC dept
Entry Date :24-JUN-07 Entry Text:Pass to DEF dept
ALAN02 12346 12-JUN-07 This is the desription
Entry Date :12-JUN-07 Entry Text:Pass to ABC dept
Clearly there are two sections in the report for each row
The first one is the main query which brings n rows
For each of these n rows , the entry date and entry text is fetched
from a different table. The entry date and text may be many to a given row
in main query. Hence the display should show one row of the main query
and a set of records for the entry date and text
In other words, the data for both sections can be fetched by using
a join . Problem is that I need to group the data for the (Entry text and date)
based on the main columns (assigned, id, date)
Can anyone tell me how I can get this ?
Thanks

Rakhee,
Did you see my response to your other thread on this same topic? If you don't need to display the data on the screen, the easiest way would probably be with a PDF report.
If you can't do that, creative sql or using pl/sql loops and outputting the data using htp.p would work too -
-- Sharon

Default Web Template for port 8001

Hi,
We are using single sign on with EP and BI. When I execute my queries port 8001 is used. I really like the standard template that is shown but need to add a couple of buttons. What template is this and how do i hook it up to use my modified version as the standard? It doesn't look like 0Analsys_Pattern.
http://erppbi01.erp.co.marin.ca.us:8001/sap/bw/BEx?sap-language=EN&bsplanguage=EN&cmd=ldoc&QUERY=ZMOMVACT01&VARIABLE_SCREEN=X
thanks
heather

Hi Aleksi,
Pls. see if this helps you...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/help/sdn_nw04/saphelp_nw04/helpdata/en/f9/7f12403dbedd5fe10000000a155106/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/library/biw/2.0/2.0bReportingAgentincl.PrecalculatingWebTemplates.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/help/sdn_nw04/saphelp_nw04/helpdata/en/fe/1f813b310c4a0ee10000000a114084/content.htm
Thanks,
Raj

Move/Copy page outside its page group

oracle 9ias:
I want to move a page from a page group to another.
I could try to update the table containing the concerning table manually (update WWPOB_PAGE$ and set siteid and parentid), but I have no idea if that is a safe solution.
Any ideas would be most welcome,
A.B.

Hi Angrydot,
I like your idea. However, being dealing with transport issues on almost daily basis for quite some time, I think it will not work either.
First, what I understood from your brief suggestion is this:
get the transport set by exporting a page group from source,
import the transport set on the target.
rename page group back to original page group name.
some of the problems will be as follows:
- You may export a page group on the target which will no longer exist on the source. However, the GUID of the page group will stay the same during renaming. so future exports and transports will give you conflicts.
- Note that the page-group and pages transports are supported if you delete the pages on the target machine. this is something which you get from the portal transport supportability scenarios. see note 333867.1 on Metalink.
- also note that it is not supported to rename or edit on target machine, or to create a fresh page or page group on the target with the same name as you are importing in from the source.
- Also renaming a default page group (like SHARED, or TOPLEVELSITE, etc) and trying to move content from it to another system will be problematic too.
I will be interested in knowing if you did a successful experiment of at least two successive transports in the way you prescribed.

Default Page Template for Portal Page Group

Similar Messages

Maybe you are looking for