Default paragraph format in SMART FORMS

Hi all!
Can we mention  default paragraph format for SMART FORMS? How can we do that?
Please suggest.

Goto FORM attributes of your smartform and insert your smart style in output options tab.. before inserting your smartstyle you should create a smart style and create a paragraph format in your smartstyle in header data of smartstyle it ask for standard paragraph(i.e default paragraph)...
Close rge thread once your question is answered.
Regards,
SaiRam

Similar Messages

  • How to create the Paragraph styles in Smart Forms

    Dear Techie's,
    Please let me know, How to create the own Paragraph styles in Smart Forms i.e to make the line or a particular font in BOLD.
    Please put the light ASAP.
    Regards,
    Maddu.

    hi
    good
    You can create additional fonts and style with transaction SMARTSTYLES
    This can then be define in the paragraph and character formats, which you can then be assign to texts and fields in the Smart Form. 
    The character formats includes effects such as superscript, subscript, barcode and font attributes.
    thanks
    mrutyun^

  • How to print form into pdf format using smart forms in abap

    please let me know how to print form into pdf format using smart forms in abap.
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

    Hi ,
    refer this link
    <removed by moderator>
    Regards,
    Dhina..
    Moderator message: please do not reply to questions that violate forum rules.
    Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

  • Protection of character format in Smart Forms

    Dear All,
    Similar to the "protected" option in SAP Script for Character format, please let me know "how to protect a character format in Smart forms?"
    Regards,
    Anand

    Hi,
    By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected. 
    Also, chck the following link:
    Page-protection option disabled in Folder node for Smartform
    Let me know in case you need further assistance!
    Thanks,
    Varna

  • Paragraph format used in Form, but not defined in Para formats of the form.

    Hi friends,
                      I was trying to edit a form window, which has paragraph formats of the name HN HT etc being widely used .
    But when i check the paragraph format defenitions for this particular form , i dont see these being defined there.
    I doubt its because of the same reason, when i try to change the editor to PC editor , the message comes "cant open PC editor,
    Format HT not found" ( when i remove all HT from the ediotr , it shows that HN not found).
    please help me on this .
    Thanks ,
    Shyam.
    Moderator Message: Duplicate post locked
    Edited by: Suhas Saha on Sep 6, 2011 12:48 PM

    Hi shyamkumarc,
    you need to declare the smart style than only you will get all the paragraph formats which are there in the smart style
    Thanks
    Surendra

  • Date format in smart form

    How can we change the date format in a smart form.

    define a var of type string in global
    1)get the req date use edit mask function to modify it
    2)convert tthe date as u wanted in program lines in smart form
    3)assign the same to the string variable & then u can display the same
    i hope this works
    close the thred if problem is solved

  • Word Format of Smart Forms Output

    Hi,
    We want the Smart Form output in DOC format. If we are using the function module 'CONVERT_OTF', the output is perfect when downloaded as PDF with all background pictures and formats but when we are downloading in DOC format all the formatting and background pictures are absent.But we need all formatting options like boxes, fonts and background pictures in the downloaded DOC format.
    If any of you have worked on the same please reply
    Thanks in advance.

    As far as I know there is no way to convert the smartform into word, without loosing the format and pictures.
    But you may convert the pdf output to word by a third party solution. Use SolidConverter. Version 1 is free and it is the best converter I have seen.
    If it helps please give points.

  • What table stores the SAPscript paragraph formats for a form.

    Does anyone know where the paragraph formats are stored for a SAPscript form.  I can view them using SE71, but what I am looking for is the table where all this information is stored.
    Thanks.
    Bill Lomeli

    Hi Bill,
    Check table "DOKHL" .
    ID = 'DE' (Paragraph ID)
    LANGU = SY-LANGU
    OBJECT = 'TDPARAGRAPH'.
    TYP = 'E'.
    *------Sample code -
          SELECT SINGLE *                       
            FROM  DOKHL                         
            WHERE LANGU      = LANGU            
            AND   ID         = ID    "Paragraph ID"             
            AND   OBJECT     = OBJECT      "value :TDPARAGRAPH"     
            AND   TYP        = TYP        'value :E'.       
    Lanka
    Message was edited by: Lanka Murthy

  • Standard US Address format in Smart forms

    Hi All,
    Can any one please tell me how can we achieve standard US Address format while displaying Address.
    Thanking you in advance.
    Ragards,
    Bhanu.R

    Command ADDRESS - ENDADDRESS formats an address according to the postal standards of the destination country defined in parameter COUNTRY. the reference fields are described in structure ADRC
    Syntax
    /: ADDRESS
    write ur address between this commands
    /: ENDADRRESS

  • Default settings for sending smart forms via mail saving it in pdf

    do we have to do any default settings in any trasaction code like scot for solving the above problem

    hi  thanku very much durga prasad
    my mail id is [email protected]

  • Graphics(Styles) are not Affecting in HTML Format of Smart Form

    Hi,
    I have converted a Smartform from PDF format to HTML. but the Graphics ( Styles ) are not Affecting the out put.
    Can any body Give me the solution.

    Please suggest me ,how to convert from pdf to html workformat,if any program is available for that.Please send it

  • Smart form Date formate

    Hi All,
          I am new to smartforms.I want to position the  date on page top corner of the left side of the form such as day month year(Tuesday,january 01,2008).how to get this formate in smart form?
    Thanks & Reagrds
    HB

    Hi,
    Check this  it may be useful to u
    Formatting Date Fields: SET DATE MASK
    To define the formatting of date fields, use the SET DATE MASK control command. Executing this command causes all subsequent date fields to be printed using the specified format.
    Syntax:
    /: SET DATE MASK = 'date_mask'
    In the date mask, you can use the following codes:
    DD: day (two digits)
    DDD: day name - abbreviated
    DDDD: day name - written out in full
    MM: month (two digits)
    MMM: month name - abbreviated
    MMMM: month name - written out in full
    YY: year (two digits)
    YYYY: year (four digits)
    LD: day (formatted as for the L option)
    LM: month (formatted as for the L option)
    LY: year (formatted as for the L option)
    All other characters found in a date mask are interpreted as simple text and are copied straight into the output.
    Assuming the current system date is March 1st, 1997.
    /: SET DATE MASK = 'Foster City, MM/DD/YY'
    &DATE& -> Foster City, 03/01/97
    /: SET DATE MASK = 'MMMM DD, YYYY'
    &DATE& -> March 01, 1997
    The date mask may be reset to the default setting by using an empty string:
    /: SET DATE MASK = ' '
    The abbreviated and full forms of the names of the days and months are stored in the language dependent TTDTG table under the following keys:
    %%SAPSCRIPT_DDD_dd: abbreviated day name
    %%SAPSCRIPT_DDDD_dd: full form of day name
    %%SAPSCRIPT_MMM_mm: abbreviated month name
    %%SAPSCRIPT_MMMM_mm: full form of month name
    dd: day number 01 = Monday,..., 07 = Sunday
    mm: month number 01 = January,..., 12 = December
    Regards

  • Text formatting in FSCM correspondance using smart-forms

    Hi Experts,
    We are using FSCM correspondance functionality with smart-forms in our project. As per requirement, we need to have some text in italics and bold. We have used paragraph format/ character format in smart-form to get the same. When we trigger correspondance, print preview looks fine. But, when we receive actual mail with attachment as .PDF of the smart-form, we are not able to get characters in italics. Bold is working for us but, not with font ARIAL. Our requirement is to use ARIAL font only.
    If someone has already worked on similar requirement, please share your experience with me. Or please provide some pointers to look for. Any input will be highly appreciable. Thank you in advance.
    Gouri.

    I'm not sure if SmartForms support the Arial font. You can look for notes on this. Helvetica is almost the same and is supported. So this is what I generally use.
    Rob

  • How to print BAR code in SMART Form

    Hi All,
    I have the requirement to print BAR CODE in Smartforms.
    For this, I create a character format with Bar code in style forms and create a text element in Smart form and associate bar code character format with this text element.
    Now when I look the print preview for the data, then it shows me data in bar code format but not in right format i.e. its shows me all the similar block in bar code.
    If you look the bar code in SAP script, its always show you bar code with similar block, but in SMART FORM it will show you exact bar code; as in SAP Script, bar code is generated at printer end and in SMARTFORM bar code is generated as graphic in SAP and then sent to printer for print.
    PLease let me know, why in SMARTFORM its not showing BAR CODE in correct format in print preview.
    Thanks
    Piyush Mathur

    Hi,
    To Create a Bar code prefix:
    1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
    2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
    Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
    The place where you are using the field value use like this
    <C1> &itab-field& </C1>.
    You will get the field value in the form of barcode.
    Which barcode printer are you using ? Can you download this file and see.
    http://www.servopack.de/Files/HB/ZPLcommands.pdf.
    It will give an idea about barcode commands.
    Check this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
    Detailed information about SAP Barcodes
    A barcode solution consists of the following:
    - a barcode printer
    - a barcode reader
    - a mobile data collection application/program
    A barcode label is a special symbology to represent human readable information such as a material number or batch number
    in machine readable format.
    There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
    You can print barcodes from SAP by modifying an existing output form.
    Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
    Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
    reward if useful
    regards,
    ANJI

  • How to Set the Paper Size in Smart Forms

    Hi Friends,
                     I need to SET the Paper Size to default A4 in a smart form...and in some other case we need to set to other type 8.5 X 11...How can i set it....?

    Moving this discussion to the Scanning & OCR forum.

Maybe you are looking for