Default Parameters in SQL Report will not be set

Hi there,
I'm currently working on a repor twhere I created some Parameters. My Problem is that for some particular Parameters the Default value are not set automatically as in other Parameters. What am I missing? The data are out of a SharePoint list and they are
all stringvalues. Because of the issueI always receive the following error message
Parameter validation failed. It is not possible to provide valid values for all parameters. (rsParameterError)
Thanks in advance for your help

Hi Spätzel,
According to the current description, I want to know how to set particular parameters for their Available Values and Default Values, and whether they are hidden parameters. Additionally, I would like to confirm which edition of Reporting Service you are using.
Based on my research, hidden parameters with defaults or dependent on previous parameters don't automatically recalculate after applying 2008 SP2. In this case, the behavior is a known issue. We can resolve it through upgrading to 2008 SP2 CU5 or 2008 R2 RTM
edition.
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Similar Messages

Published report will not run; works fine in VS2010 debug mode.

Have 64bit Visual Studio Ultimate installed, CRv13_1 and MSSQL 2008 R2.
The issue I am having is the report work like a champ when I run the web application in debug mode. IE I hit the run button in Visual Studio, However when I publish the application the report will not run. I get various errors depending on how I have connected to report to MSSQL. I have tried ODBC and OLE DB connections. I have tried Windows authentication and MSSQL user login. The results are the same. the report works fine in debug mode but will not work when published. The most common error message is :
Error
Database logon failed.
or
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Depending on how I am authenticating. I have Google this issue and there are tons of posts about it but no solutions. Any help would be appreciated.

See if the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de] helps.
I'd settle on the prefered connection method and troubleshoot that. Use the search box in the top right corner of this web page. It will bring up KBases, blogs, wikis, articles and more. Also, search these forums. There is lots of info here and lots of answers.
- Ludek

Firefox 10.1 crash reporter will not go away? Suggestions?

Updated system (Vista) system would not start so restore to earlier date...now Firefox will not start and Crash Reporter will not go awya. I cannot download a new version as when extracting it keeps asking for the administration account and I have none set up...suggestions?

Using System restore can cause your Firefox installation to get corrupted because not all files are restored, so be careful with doing a System Restore.<br />
You will have to reinstall Firefox and remove the Firefox program folder (C:Program FilesMozilla Firefox) before reinstalling a freshly downloaded Firefox copy.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I ordered a photobook, when I went to purchase it flashed up a warning about default text saying 'printed books will not include this text'. Really dissapointed, my photo book arrived with the default text printed. Will I have to return it?

I ordered a photobook, when I went to purchase it flashed up a warning about default text saying 'printed books will not include this text'.
Was really dissapointed when my photo book arrived with the default text printed. Will I have to return it? Or can I get some sort of discount? I don't live near a post office so I'd rather not have to return it.

Contact Apple support - they can answer that type of questions - we are just users here like yourself
BTW - it is best not to order when you have errors - to resolve that error place a single space in the subject text box
and always
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

HT4528 my i phone four will not re-set it keeps giving me error code 1611 any ideas

my i phone four will not re-set it keeps giving me error code 1611 any ideas?

Turned out that I had to delete the password first before I could change it.
That's the first time I ever had to do that.
In the past it would just accept the password that I entered when asked for it.
Now I will remember - i hope! :)

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

Howdy eewebe13,
So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
Please step through this article for that scenario.
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Thank you for visiting Apple Support Communities.
Nubz

Computer Clock will not hold setting

After taking my MBP into the genius bar to have a hardware issue fixed the machine clock will not stay set. Every time I restart I have to reset my machine.
Anyone have any suggestions?
Here is the error language:
+Your computer's clock is set to a date before Jane 1, 2008. This may cause soem applications to behave erratically. To set the clock manually, open Date & Tome preferences. For more information. choose Help > Mac Help+
I am forced to set manually each time I reset.

The clock in a laptop is kept alive by the laptop battery. So, if it is being reset, it seems something is wrong with the power subsystem. You might try going back to the genius bar with that.
Otherwise, you could also try [Resetting the SMC|http://support.apple.com/kb/ht3964].

Sql server will not start - Database 'model' cannot be opened. It is in the middle of a restore.

Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s      SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s      Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s      The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server      A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s      Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s     Starting up database 'model'.
2009-08-13 14:15:44.32 Server      Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server      Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server      Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server      Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server      Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server      Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s     Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
                                                 status
master
                                                       65544
tempdb
                                                       65544
model
                                                       65568
msdb
                                                  1073807368
SS_DBA_Dashboard
                                                  1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!

I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server      Error: 17058, Severity: 16, State: 1.
Server      initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server      (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server      All rights reserved.
2011-03-29 16:50:49.40 Server      Server process ID is 7292.
2011-03-29 16:50:49.40 Server      System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server      Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server      Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server      This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server      Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server      Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server      Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server      Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server      Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s      Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s      CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s      SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s      Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s      The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s     Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s      Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server      The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server      Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server      Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server      Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server      Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server      Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s     Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s     Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server      Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Default Parameters in Crystal Report

Hi all visitors
I have created one crystal report and now i want to set the parameters to my report by using parameters in Crystal Report( the parameters not from sql).My parameters are datetime datatype. in my report, i create one formula( get date from DocDate field from sql).How can i set the default "Todate" parameter as current date?
Best Regards,

Hi,
So all of the seleciton is done using selecct expert. They have alot of default values there...but if you go to advanced then you can do much more still. So if you just want to only use the currentdate then you can just do something like
date({IT_ChangeManagement.Deployment Date/Time}) = currentdate
In the above case there would be no parameters needed and would show the currentdates information. You could of course do a varity of >= or <= using the above method.
If you want more flexability then you could create a parameter or two . Here is an example. This is again done in select expert....
if {?Start Date} <= date("01/01/2000") then
date({IT_ChangeManagement.Deployment Date/Time}) = currentdate
else
{IT_ChangeManagement.Deployment Date/Time} >= {?Start Date} and
{IT_ChangeManagement.Deployment Date/Time} <= {?End Date}
The above defaults to the current date if the start date is older than 2000, otherwise it uses the start & end date parmeters.
Make sense?

Refresh PL/SQL Report Region (not Page) using Select List value

Hi,
I've got a report region based on a 'PL/SQL function body returning a SQL query'which gets generated on selecting a value from a Select list item, The Select List action is 'Redirect and Set value' but this causes the whole page to refresh rather than just the report region. I've tried to refresh the report only using a dynamic action on the Select List item (Action now reset to 'None') but now the report is not appearing on choosing from the List. Can anyone suggest a solution that will allow me to refresh this report without refreshing the page? I am using APEX 4.2.2 and the report syntax is as follows:
DECLARE
v_statement VARCHAR2(500);
BEGIN
SELECT query_text
    INTO v_statement
   FROM sql_queries
   WHERE query_id = :P2_QUERY ;
   RETURN v_statement ;
END ;
where P2_QUERY is Select List Item,
regards,
Kevin.

KevinFitz wrote:
The report region being displayed is conditional on P2_QUERY item being NOT NULL. I assume the region not appearing is because the Action for the Select List Item is set to None and so P2_QUERY is always NULL.
No, the region is not appearing because it is conditional on P2_QUERY being NOT NULL. This means that the report region never exists on the page shown in the browser, so it can't be dynamically refreshed. (Dynamic refresh doesn't evaluate region conditions, and it only re-renders the report content, not the entire region.)
Remove the condition on the report region, check the refresh is working, then reconsider exactly what the requirements here are. If you want the region to appear only when P2_QUERY has a value, and you want it to be refreshed without submitting and re-rendering the page, then the region needs to be hidden rather than conditionally rendered, and shown via a dynamic action when P2_QUERY gets a value.
I tried adding an additional Set Value True Action for the DA event but got an error as listed above,
All irrelevant if Page Items to Submit on the region is used properly.

Report will not open due to an invalid printer issue.

Post Author: Tammy Chavez
CA Forum: General
I have a Crystal Report that will not open. It gives the following error messages:
1.The report uses and invalid printer. The default printer will be used instead.
2.Failed to open document.
3.TSLV Record Not Found.
4.The report couldnot be opened for writing. Any changes must be saved to a new file.
Then it will not open the file at all. Anyon have this type of issue before?

Post Author: mario
CA Forum: General
Tammy Chavez: Is there another program to try to open it with?
I don't think so, forget that. If you downloaded the file with Firefox try to do it again with Internet Explorer. I remember some time ago Mozilla having issues with some binary files. Or tell the client to zip the file before emailing it to you - if unzipping works and CR still complains about missing records then the problem is only on your machine and you should check the dlls (Google for them).

Report will not run after upgrade to new Crystal server

My company has been using Business Objects version 11.5 Central Management Console and InfoView for Crystal reports. We are upgrading to
SAP BusinessObjects BI Platform 4.1 Support Pack 1 Version: 14.1.1.1036 Central Management Console and BI Launch Pad. I have one report that is using a sql command for nat2date of a database value that is running successfully on InfoView but will not run on BI Launch Pad. The nat2date function is converting a random number in our database to a date and then selecting the records for the report by using the LastFullWeek function.
({Command.NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)} in LastFullWeek)
Is there something I need to add to the new CMC to recognize this sql command?
Thanks for any suggestions!

Ok, with BI 4.1 you'll need to use Crystal 2013 instead of Crystal 11.5. For the vast majority of your reports, you won't have to manually upgrade them because the 11.5 version will work fine in the new version of BO.
I suspect the problem you're seeing is with the "{Command.NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)}" syntax. is "NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)" the field alias that you're returning for this function? Or are you trying to call the function like this? I would call the function and alias it in the "Select" clause of your command so that it looks something like this:
Select
...<various fields>...,
NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME) as FROZEN_DATE
from
where
You could then change the selection criteria to something like this:
{Command.FROZEN_DATE} in LastFullWeek.
That will fix the report as is.
However, when you use the Select Expert for reports that have a command, Crystal will pull ALL of the data from the query into memory and then filter it there - it will NOT push this selection criteria down to the database. So, I usually recommend that you put all of the filter criteria in the Where clause of the command. You could use something like this to get "LastFullWeek":
NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME) between Trunc(Sysdate - 7, 'DAY') and
Trunc(Sysdate, 'DAY') - 1
"Trunc(Sysdate, 'DAY')" will give you the first day of the current week and "Trunc(Sysdate -7, 'DAY') will give you the first day of the previous week.
If you do it like this in the where clause, you may not have to include the "Frozen_Date" in the select clause.
-Dell

I can't get into any mail or internet unless I go thru google. I tried to reload and get error. The FIREFOX error report will not send either.

I tried to reload , received error. Will not send trouble shooting CRASH REPORT. Was working great until crash. Will not accept or I cannot figure out how to have forefox accept updates for ADOBE updates or my virus protection STOP SIGN.

<blockquote>Locking duplicate thread.<br>
Please continue in your previous thread: [[/questions/964962]]
</blockquote>

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

SQL file will not open in SSMS on double-click (or jump list)

Hello, all.
I am running SQL Server Management Studio 2008 on a Windows 7 Enterprise machine here at work. I am not sure when this started happening, but now, for some reason, when I double-click on a SQL file in Explorer, or from the jump list for SSMS (which
I have pinned to my Windows 7 task bar), SSMS will open, but will not load the file in question, nor will it bring up a logon screen to connect to a DB. I tried unassociating the .SQL extension and then re-associating it using "Open With" and it worked
the first time (from the Open With), but then immediately reverted back to its old behavior. Very annoying.
For now I just open SSMS first (which pops up a logon screen and things proceed normally), but that kind of defeats the purpose of having a jump list or a file association. Has anybody run into this before and can anybody suggest a fix or what's
wrong?
Thanks in advance for any wisdom anyone can provide.

Hi Mike,
I can provide solution if you can tell me the registry value(HKEY_CLASSES_ROOT\sqlwb.sql.9.0\Shell\Open\Command). I believe there is an extra %1 which is causing this.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog: http://blogs.msdn.com/blakhani
Team Blog: http://blogs.msdn.com/sqlserverfaq
Let me see if I can get my IT guys to temporarily grant me registry access. As I said above, it's locked down, but maybe if I ask
reeeeally nicely :-) I will keep you posted. Thanks!
EDIT: The IT gods have smiled on me. The value for the key above is "C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\ssms.exe" /dde
Not sure if that helps, but there you go. Thanks!
Mike Loux
Certified Practicing Geek
mike dot loux at gmail dot com
Replying to myself in case in-place edits don't trigger a "somebody updated this thread" email. :-)
Mike Loux
Certified Practicing Geek
mike dot loux at gmail dot com
Hey Mike,
Actually edit didnot trigger the email :)
Change that to
"C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\ssms.exe" %1 /dde
(add %1 and that should fix this forever)
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog: http://blogs.msdn.com/blakhani
Team Blog: http://blogs.msdn.com/sqlserverfaq

Default Parameters in SQL Report will not be set

Similar Messages

Maybe you are looking for