Default password for PAP2T

I have an unlocked PAP2T. I am trying to get into the web interface. My ISP states that the default username and password is admin / admin but it is not working. Does anyone have any suggestions or is there perhaps a different default password than the one i was provided? I can't get a hold of my ISP.

try just admin or Admin for the username with no password, if the device has not been set with a passowrd before, this should work.

Similar Messages

Default password for SID adm

The subject says it all - I am new to MaxDB, and did not install the application.
We are trying to update some tables, and get permission errors.
I have the SUPERDBA user, but that user does not have permissions on the <SID>ADM tables.
Is there a default password for the <SID>ADM database user?
I am probably missing something very easy here.

SAP customer - yes - I am reviewing the documentation - it leaves a lot to be desired
Here is the output you requested:
dbmcli on GRD>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160032';'20090218';'00160032';'GRD';'grc-app-dev01';0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160033';'20090218';'00160032';'GRD';'grc-app-dev01';10;'NO';(null)
'SUPERDBA';'';'SAPGRD';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160045';'20090218';'00160045';'20090218';'00160045';'GRD';'grc-app-dev01';28;'NO';(null)
'SUPERDBA';'';'SAPGRDDB';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160052';'20090218';'00160052';'20090218';'00160052';'GRD';'grc-app-dev01';29;'NO';(null)
I'm not 100% sure what you are looking for on the second query, all I could get to work was this -
select * from tables
which gives a lot of output, here is some:
'SUPERDBA';'SUPERDBA';'ROOTS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B1';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_COMMANDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B2';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_PARSEIDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B3';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'SERVERDBSTATISTICS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000A1';(null);(null);(null);(null)

Set default password for all users including csv file

I would like to set the default password for all users
including the ones imported in the csv file?
Also now the default passwrd in set to the email address. How
do i change that setting to the "login" setting in the csv file so
those users can loin with that password?
Kinda the same question but do yuo get the idea?
Thank you,
Chip

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

What is the default password for Windows server r2?

What is the default password for the evaluation copy of Windows 2012 R2?
You can't log on and it wants to change the password , yet nothing works .
This is the non gui version. About to format it and install the GUI version to see if it doesn't have this bug.
Thanks

I downloaded from MS on Friday.
It refuses to let me set a password or log on. Tomorrow I will blow it off and try the gui version to see if it's any better.

Need to know what is the default password for sysman

Hi
I just like to know what is the default
password for "sysman" user in the Enterprise Manager version 2.1.
thanks in advance
null

Venkil,
The default password for sysman is oem_temp.
Regards,
John

WHAT IS THE DEFAULT PASSWORD FOR GUEST USER

what is the default password for guest user?

There is no default password for a guest user unless you've created one:
(screenshot from the System Pref Guest User Pane)

What's the Default Password for Logging into huawei switches?

I was wondering if I bought the Huawei switches,
what’s the Default Password for Logging into them? so many people may have the same question that if bought a Huawei switch, what's the default password for logging into the switch? and maybe different kind of switches have different kind of passwords,
so maybe all of us wanna know them clearly.
Here, i'll tell you.
As for the bootrom default code:
Huawei S9300 V100R006 and the earlier version is 9300
Huawei S7700 V100R006 and the earlier version is huawei
And you can log into
http://www.huanetwork.com/blog/whats-the-default-password-for-logging-into-huawei-switches/ for more information, really useful.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Does iTunes have a default password for initial encrypted backups?

I have an iPhone that was connected to iTunes for the first time today. It is a company device and IT has set a policy to require backups to be encrypted.
When I first plugged the phone in, iTunes automatically did a backup as it had never seen the device before. Due to a software issue, Apple recommended that I do a restore to factory settings and then restore from backup, so once the initial backup was completed, I performed the restore to factory just fine. However, when I attempted to restore from backup, I was prompted for a password even though I was never prompted for a password when iTunes created the backup. I have tried every password I can think of including my company domain password, iTunes password, iPhone passcode, etc...etc...to no avail.
Does anyone know if there is some default password that iTunes using when doing an initial backup without prompting the user for a password?

Caronold -
I have the same problem when i updated to iOS6 3days ago from iOS5.1.1. I've tried every passwords i can think of but NO luck.
Even the folks at genious bar said : good luck!!
A Third party software that can decrypt?

Does anyone know either the default password for the YouTube app or how to sign up for googles 2-step verification? Any help would be appreciated.

I have a YouTube/google account, but when I tried to sign in it said I had an incorrect password. I tried again and it gave me the same message. However, when I sign in using safari, it works just fine. Then I found out it was because of the new 2-step verification of googles. But when I tried to sign up for two step verification, I couldn't see how, nor did it give me a default password to YouTube.

Check out Wordpress. You can either use the website at Wordpress.com or use the Wordpress software installed on your site to run it. A lot of companies (not so secretly) use Wordpress as the backbone of their website with a custom "theme". Take a look at this YouTube video and it will give you a little more background than I can just typing an answer. Although it focuses on blogging, it can just as easily be used for another kind of website with a different free theme:
http://www.youtube.com/watch?v=MWYi4_COZMU
And if you wnated to install it on your own website, check out the info from Wordpress.org:
http://codex.wordpress.org/Getting_Started_with_WordPress

HT2477 I just purchased the IMac and was in the process of setting it up and got locked out. A password is being requested and I did not establish one. Is there a default password for the imac?

I just purchased the iMac and was in the process of setting it up and it locked up, requiring me to put in a password. I never established a password, does the iMac have a default password?

If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account.

What is the default password for SDM in SP15

Initial password for SDM
Posted: Mar 22, 2006 2:40 PM Reply
I have installed the SP15 SneakPreview. When i am trying to deploy a webdynpro application into portal from NWDS2.0.15, it is asking for SDM password.
Can anyone please tell me what is the default password, because i dont remember providing any SDM password during the installation.
I tried giving the Portal passwword, but it does not seem to work
Thanks
Sharath

the default password is <b>admin</b>
Here's the document that talks about it:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209">Post-Installation Steps</a>

What is the default password for weblogic 11G for EPM 11.1.2

HI All,
Just need to know the default user name and password for weblogic 11G for EPM 11.1.2.
At the time of installation I have kept the default user name epm_admin and a password... but its not accepting that user name and password.
Any help on the above?

On my painfully new 11.1.2 install, and per the install instructions, the username and password are as follows:
epm_admin
whatever you set up -- (As I only ever use one of three different ones when I do installs, it wasn't too hard to go through all of the possibilities)
See: http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install/frameset.htm?webLogicDomainName.html
Regards,
Cameron Lackpour
Edited by: CL on Aug 3, 2010 11:14 AM

Default password for HP Envy 4500

Hi I have changed service provider from BT to Sky and can not find my original password to connect the printer via wireless. Is there a default password please for my HP envy 4500. Many thanks.

you work for hp with that reply?, you do realise to access settings menu you have to KNOW the password and user name as the settings menu is protected by the flipping password,which is no help for those who have forgotten or like me the **bleep** ews has forgotten my details ,as I set up then asked to enter password and it won't have a bar of it and i know right, so i am locked out after having printer for ooh 2 hrs! have done factory reset on printer and still same ,what idiots make a password option without a "forgotten password" box on the password box to reset , I now have a brand new printer I can barely use as no solutions to reset password ,more annoying when i know for a fact I am entering correct info so any one with a brain who can help please do so

What is the default password for admin on Sun Application Server?

Hi all,
What's the password?
I've tried "adminadmin" but it didn't work.
And where can I set/change the password. I couldn't find those information in the docs which come with the JDK.
Thanks in advance.

There is no default password - you were asked to specify password during the Application Server installation.
You can either uninstall and reinstall application server and make note of the password you are entering during the new installation, or try to reset password as specified here:
http://java.sun.com/j2ee/1.4/docs/relnotes/troubleshooting.html#1026910
(note that this document is specific to J2EE SDK/Platform Edition of the Application Server and may not work with Standard/Enterprise Edition).

What is the default password for SYS?

I'm trying to connect to an Oracle 11gR2 database on Linux using sqlplus.
The sys user password version is 10G and sys is one of the usersname returned by the view dba_users_with_defpwd.
Issuing sqlplus sys will get the prompt Enter Password: but I have no idea what password I should enter.
I kind of remember that the installation has a screen to enter password for SYS but I'm not sure what has been done on that screen since I didn't do the installation.
Thanks for any help.

if you want to reset the password of sys. you can recreate the password file with below cmd.
$ orapwd
Usage: orapwd file=<fname> password=<password> entries=<users> force=<y/n> nosysdba=<y/n>
where
file - name of password file (mand),
password - password for SYS (mand),
entries - maximum number of distinct DBA,
force - whether to overwrite existing file (opt),
nosysdba - whether to shut out the SYSDBA logon (opt for Database Vault only).
There are no spaces around the equal-to (=) character.
--kuljeet Singh

Default password for PAP2T

Similar Messages

Maybe you are looking for