Default password
I just restored my phone to change my itunes account and then it did the dowload for the new software. Now it is asking for a password that I don't know or have. What is the default password?
There is no default password, is it asking you to enter the password for an Apple ID or a passcode?
Similar Messages
-
SRM 5.0 - how to change default password?
Hello,
Am trying to install SRM 5.0 Oracle 10g as the DB. In the instllation doc of SRM 5.0 a default password is given to connect to the database and I see the encrypted password is in the jdbc properties. How can we change the default password? How do I get the encrypted value?
Any help is appreciated.
ThanksPropblem resovled, find the corresponding function group and screen, then change the translation.
-
Does iTunes have a default password for initial encrypted backups?
I have an iPhone that was connected to iTunes for the first time today. It is a company device and IT has set a policy to require backups to be encrypted.
When I first plugged the phone in, iTunes automatically did a backup as it had never seen the device before. Due to a software issue, Apple recommended that I do a restore to factory settings and then restore from backup, so once the initial backup was completed, I performed the restore to factory just fine. However, when I attempted to restore from backup, I was prompted for a password even though I was never prompted for a password when iTunes created the backup. I have tried every password I can think of including my company domain password, iTunes password, iPhone passcode, etc...etc...to no avail.
Does anyone know if there is some default password that iTunes using when doing an initial backup without prompting the user for a password?Caronold -
I have the same problem when i updated to iOS6 3days ago from iOS5.1.1. I've tried every passwords i can think of but NO luck.
Even the folks at genious bar said : good luck!!
A Third party software that can decrypt? -
Unity Connection - Users with system default password getting locked out
Hi all, hope everyone is well !!
I am experiencing a strange problem and hope someone can give me some direction on where to start digging on this issue.
I am getting a good number of users reporting they are getting locked out of their voice mail and they all claim that they have not changed their password and some user even got their greeting recorded by someone else. One thing in common for the users who reported the issue is that they all using the system default password. I am trying to trace to find out who/what has access to these users' mailbox but so far I have not had any luck.
Thanks in advance !!
DannyThanks, yes am doing that now and cant really find any new/unique pattern. Plus the trace is pretty hard to follow. Cant really figure out any times stamps in the trace also. The current trace file is defaultTrace.18.trc and it has very simiiar content as some of the older ones before the problem. Right now the ESS portal is working and the slddsuser password is not locked. It seems the problem takes place on start up?
/usr/sap/ESS/JC77/j2ee/cluster/server0/log
Tough thing to test in production.
I wonder what takes place at startup that would kick this problem off?
brad -
I have a YouTube/google account, but when I tried to sign in it said I had an incorrect password. I tried again and it gave me the same message. However, when I sign in using safari, it works just fine. Then I found out it was because of the new 2-step verification of googles. But when I tried to sign up for two step verification, I couldn't see how, nor did it give me a default password to YouTube.
Check out Wordpress. You can either use the website at Wordpress.com or use the Wordpress software installed on your site to run it. A lot of companies (not so secretly) use Wordpress as the backbone of their website with a custom "theme". Take a look at this YouTube video and it will give you a little more background than I can just typing an answer. Although it focuses on blogging, it can just as easily be used for another kind of website with a different free theme:
http://www.youtube.com/watch?v=MWYi4_COZMU
And if you wnated to install it on your own website, check out the info from Wordpress.org:
http://codex.wordpress.org/Getting_Started_with_WordPress -
I have an unlocked PAP2T. I am trying to get into the web interface. My ISP states that the default username and password is admin / admin but it is not working. Does anyone have any suggestions or is there perhaps a different default password than the one i was provided? I can't get a hold of my ISP.
try just admin or Admin for the username with no password, if the device has not been set with a passowrd before, this should work.
-
The subject says it all - I am new to MaxDB, and did not install the application.
We are trying to update some tables, and get permission errors.
I have the SUPERDBA user, but that user does not have permissions on the <SID>ADM tables.
Is there a default password for the <SID>ADM database user?
I am probably missing something very easy here.SAP customer - yes - I am reviewing the documentation - it leaves a lot to be desired
Here is the output you requested:
dbmcli on GRD>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160032';'20090218';'00160032';'GRD';'grc-app-dev01';0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160033';'20090218';'00160032';'GRD';'grc-app-dev01';10;'NO';(null)
'SUPERDBA';'';'SAPGRD';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160045';'20090218';'00160045';'20090218';'00160045';'GRD';'grc-app-dev01';28;'NO';(null)
'SUPERDBA';'';'SAPGRDDB';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160052';'20090218';'00160052';'20090218';'00160052';'GRD';'grc-app-dev01';29;'NO';(null)
I'm not 100% sure what you are looking for on the second query, all I could get to work was this -
select * from tables
which gives a lot of output, here is some:
'SUPERDBA';'SUPERDBA';'ROOTS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B1';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_COMMANDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B2';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_PARSEIDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B3';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'SERVERDBSTATISTICS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000A1';(null);(null);(null);(null) -
I just purchased the iMac and was in the process of setting it up and it locked up, requiring me to put in a password. I never established a password, does the iMac have a default password?
If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account. -
What is the default password for SDM in SP15
Initial password for SDM
Posted: Mar 22, 2006 2:40 PM Reply
I have installed the SP15 SneakPreview. When i am trying to deploy a webdynpro application into portal from NWDS2.0.15, it is asking for SDM password.
Can anyone please tell me what is the default password, because i dont remember providing any SDM password during the installation.
I tried giving the Portal passwword, but it does not seem to work
Thanks
Sharaththe default password is <b>admin</b>
Here's the document that talks about it:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209">Post-Installation Steps</a> -
How to change the Default Password on AP1131AG
Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0 Specifies an UNENCRYPTED password will follow
5 Specifies an ENCRYPTED secret will follow
LINE The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuanHi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press> -
How to change the default password file's name and path when the database created?
how to change the default password file's name and path when the database created?
nullUsage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character. -
How to change default password in AP521G?
I´m trying to change the default password in autonomous AP521G, the CCA2.1 sent me errors when I tried to change, or create another user with Privilege 15.
Hello Glenn, It´s not a password recovery problem. I´m trying to change the default Cisco/Cisco username/password, but the Config Assistant doesn´t allowed.
I´m going to try with CCA 2.0 version instead 2.1.
Best Regards.
Hector -
CUE 8.6.6 default password and username
Dears,
i have a new CME with CUE 8.6 installed i tried to login thru cli to the module without any luck i tired everything in my mind
the questions what is the default password and username for CUE or how to reset the password
thanksHi Brandon
first of all i would like to thank you for your response .. and you are correct about the wizard for the first time setup but the weird thing when try to login it require to put a password\username for GUI and for the cli even if it is a new router and never configured .. and am really confused about this .. even i dont remember the default username -
Set default password for all users including csv file
I would like to set the default password for all users
including the ones imported in the csv file?
Also now the default passwrd in set to the email address. How
do i change that setting to the "login" setting in the csv file so
those users can loin with that password?
Kinda the same question but do yuo get the idea?
Thank you,
ChipYou could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/ -
PreProcess Event Handler setting default password
Greetings.
We developed a custom preprocess event handler and is working fine, but I want to set a default password for a new user using the sentence orchestration.addParameter("Password","defaultpassword") However I got the message :
<Error> <oracle.iam.identity.usermgmt.impl.handlers.create> <IAM-3050009> <Unknown attribute for entity user.
oracle.iam.platform.entitymgr.UnknownAttributeException: User : [Password]
I think that is necesary use a method like setXelleratePassword or something like that.
How to set a default password in a preprocess event handler associated to the create user event?
Thanks!Hi
Try with this.
Use orchestration.addParameter("USR_PASSWORD","defaultpassword")
Maybe you are looking for
-
Width of Hightlighted Field on Validation Error
Hi Is there anyway to control the width of the Red Highlight that the Mandatory fields get? Regards Meir
-
Mime attachments and pictures i get from my mom wont show up.
it just has " mime attachment " at the bottom? i dont even get the words that come with the pictures just the above statment. damnit i want to fix this problem its very frustrating
-
Reg : document flow for SD and MM ?
hi everybody, i want to know the document flow for SD and MM. please any guide me. my id: [email protected]
-
After software restore, window is very small
I have a G3 ibook i'm trying to do a clean install on so i can sell it. i just did the whole software restore process, then reinstalled OS 10.2 (the discs that came with the computer) and erased the hard drive at the same time. it all seems to have w
-
I'm using 1080p footage in a 720p sequence. I have 'Default scale to frame size' unchecked in preferences. (I unchecked it right after install.) For some reason it's doing it anyway. How can I stop this from happening and how can I reset the ones tha