Default phone type when adding contact

Hello,
Recently when I go to add a new contact, home is being selected as the default phone type. How do I revert this default selection beck to mobile? I know how to edit each contact, but I have 100+ to add and don't want to do that for each. Thank you.
Bryan

You're welcome.
You can send a feedback to Apple below:
http://www.apple.com/feedback/iphone.html

Similar Messages

  • Since the upgrade to IOS7, the default phone label when adding new contacts on my iPhone 5 is "Radio".  Previously the default was "Mobile" how can this be changed back to "Mobile"?

    Since the upgrade to IOS7, the default phone label when adding new contacts in my iPhone 5 is "Radio". Previously the default was "Mobile". It is a hassle as when my iPhone contacts are synched with Outlook via Exchange, the phone number I've entered on the iPhone doesn't show on the default Outlook view as it is a "Radio" number rather than a "Mobile", "Work", "Home", etc number. It is still stored both on the iPhone & in Outlook & I can still use the number to phone or SMS, it is just incorrectly labelled & hence the source of frustration.
    Apple please return the default to "Mobile" or alternatively find a way we can alter the default ourselves to "Mobile" or "Home" etc.

    The following previous discussion may help: https://discussions.apple.com/message/23846793#23846793

  • Default Action type when hire internal employee

    Dear all,
    How to set Default Action type when hire internal employee?
    Thanks,

    Hi,
    May be that. When i transfer applicant that is hired internal, the action type is default Reentry into company. So how to change this?
    Edited by: Quang Le Vinh on Nov 7, 2009 2:54 AM

  • Default PR Type when convert from Planned Order

    Hi all,
    How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
    Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
    Thanks.
    Regards,
    Andrew

    Hi,
    The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
    Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
    Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
    Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
    Please try and come back.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Aug 28, 2008 10:54 AM

  • Library error when adding contact or when logging in

    The messenger server has a replica of the partition holding the users.
    It's an OES 2 sp2 server, and the GW Messenger is 2.04.
    Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
    We also sporadically see a 'Library error' when some users log in to it.
    Looking in the log I see an error that says 0xAE16 when users log in fails.
    I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.

    I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
    I've also, for now at least, chosen another replica.
    I haven't seen the errors yet, so here's hoping...

  • Reg: default  file type when using 'WS_UPLOAD'

    Hi,
    Iam using FM 'WS_UPLOAD'.
    my doubt is : If u don't specify FILE TYPE ....what is default file type it is going 2 take.
    Regards
    Vaja

    Hi Sudha,
    thanks for ur answer.
    Plz look into this.
    I have program with  internal table declared as below with 2 fields.
    when i specify the input file using   FILENAME =  P_FILE.....
    the input file has only one field values(i.e. only matnr values).
    So, I am getting error : "unable to load input file".
    so my query is Can i specify input file with only matnr values and download into internal table (ITAB_MATNR--which has 2 fields)
    DATA: BEGIN OF ITAB_MATNR OCCURS 0,
            MATNR LIKE MARA-MATNR,
            COUNT TYPE I,
          END OF ITAB_MATNR.
      CALL FUNCTION 'WS_UPLOAD'
          EXPORTING
               FILENAME                = P_FILE
            filetype                = ftype
           TABLES
                DATA_TAB                = ITAB_MATNR
          EXCEPTIONS
               CONVERSION_ERROR        = 1
               FILE_OPEN_ERROR         = 2
               FILE_READ_ERROR         = 3
               INVALID_TABLE_WIDTH     = 4
               INVALID_TYPE            = 5
               NO_BATCH                = 6
               UNKNOWN_ERROR           = 7
               GUI_REFUSE_FILETRANSFER = 8
               OTHERS                  = 9.
      IF SY-SUBRC <> 0.
        MESSAGE E699(PP) WITH 'Unable to load input file' P_FILE.
      ENDIF.

  • ADDRESS BOOK CRASHES WHEN ADDING CONTACT

    Hi guys,
    I've been having this problem since Mac OS X v.10.5. I have since (for other purposes) wiped clean my Macbook various times, updated it to Snow Leopard, and wiped it again a couple of times. After each wipe or update, the Address Book application works fine, but after a couple of weeks it starts to crash.
         This happens when I try to add a new contact. I click on the + button and am able to enter the card info, but when I click + again or close the application or anything else, Address Book crashes (with the usual afterward prompt of sending an error report, etc.). When I open it again, the added contact is not there.
    PLEASE help me. I use Address Book quite a lot and it's truly bothersome to have it not working.
    Thanks!

    When you reinstall, do you also restore your contacts from a backup?
    If so, you may have brought over whatever it is that is causing you problems.
    First, open Address Book and create an Address Book archive (File menu, export…)
    Second, go into your user/Library/Application Support/AddressBook folder and delete the
    AddressBook-v22.abcddb file. It is an index to the metadata (vCards).
    Third, go into your user/Library/Preferences and delete the com.apple.addressbook.plist file. That is the Address Book preferences. So, you will have to edit them back to your liking if everything starts working correctly.
    Now, try Address Book and see if it works ok.
    If you are syncing with MobileMe, you might consider resetting sync services if the problem returns.
    Also, can you post a crash report? You can find them in Console, look in the CrashReporter section under ~/Library/Logs--just copy and paste it here.

  • CS4 Set default file type when placing file

    The File->Place dialog box has a default file type of 'Importable files.'  Is it possible to set the default to All files (or anything else)?  Making the change manually does not seem to stick.  I have the same general question regarding File->Open.  A search of the forums returned one hit (unanswered) in the Dreamweaver forum.
    Thank you.
    Dick Conrad

    Peter:
    Good question.  One of our editors made this request, and I believe that he works with files that lack extensions.  But controlling the default would also let us go in the other direction: quickly see only .rtf or .txt files, for example.
    Any trick would be impractical if it lived in InDesign Defaults.  All ID users get the same copy, and no two editors would want the same filter.
    Thanks for your response.
    Dick Conrad

  • Default valuation type when issuing material or Creating Delivery

    Hi,
      We have some material manage with valuation type  X,   Y,  Z   while creating PO  we are entering Valuation type in PO as per requiremtn   but i want that  whenever we issue the material  with 201   or creating delivery of that material with VL01N or VL02N  default valuation type should be    'Y'  so how to set this as default.
    regards,
    zafar

    You will need to create a stock determination strategy and stock determination rule  and assign it to the material master.
    use TCODE : OSPX.

  • Default D:\i386 When Adding 86 Print Driver To Server 2008 R2 64

    This has happened several times with a printer that i have installed on the server. 
    Printer works fine, but in sharing, additional drivers, when adding a 86 driver, i get the box "PLEASE PROVIDE PATH.....COPY FILES FROM ........D:\i386.
    I have the proper driver, i installed it on my 32 bit xp computer, and printed fine by adding the printer by tcp on my computer.
    I am trying to add this driver, so when i share the printer on the server, an xp machine can receive the drivers and install .
    Any ideas
    Thanks

    Check once again whether you are configured printer properly or not?
    Still you face problem, Get a help from respective
    print/fax forum 
    Regards, Ravikumar P

  • BUG REPORT: iPhone 4 Crashes When Adding Contact to Favorites

    Here are the exact steps I went through to reproduce the problem.
    Go to settings and set up an exchange account to work with Google Sync. The instructions are here:
    http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
    After syncing your contacts, go to the Phone app. Go to Favorites and hit the "+" button to add a favorite. Use the search bar to find a contact (important). Once you find the person you want, select them from the list, and when you do, the app crashes.

    I have no idea how to share this bug with Apple.
    Go here: http://www.apple.com/feedback/iphone.html and choose *Bug Report* from *Feedback Type* popup menu.
    Before doing that though, try to confirm that the same thing happens on other iPhone's and it does it after a reset or restore.

  • Ending one credit card type when adding another

    Due to the change in our credit card processing from a flat rate to a percentage, I need to end our usage of a certain credit card type.  In the configuration, I do not see away to delimite the card type.  Yet deleting the credit card type from the list seems to leave us openfor problems,  if we need to reprocess a card after we remove the card type from our configuration.  Does anyone have a suggestion on how to end a credit card type?  We can code in our CMAC_authorization and Biller Direct to not accept this card type.  Would this be the solution?

    Bev,
    There is not a direct way to just delimit the payment card types.  So, you should use the method you mentioned, or possibly something like this:
    - Define a 'Payment Card Lock' reason like '20 - Payment Card Type Obsolete'
    - Do a mass update of the Payment Card table 'CCARD'  to update 'CCLOCK = 20' where 'CCINS' = the card type to block.
    This will then block usage of all cards of the obsolete card type.
    Then, you need to stop users from creating new cards of that type.  Aside from adding "obsolete" to the Card Type, you can also put in a Checking Rule (used when the card number is entered) for the card type to just reject all entries.
    Of course, if all the new cards are entered via Biller Direct, you should customize the card creation screen to leave out the obsolete type.
    I hope this helps.
    -Michael

  • Server error when adding contacts

    I always get a server error message whe adding or editing Contacts on iCloud on my pc using Vista. Is there any obvious reason for this?

    I suggest that you log a TAR and work with Oracle Support on resolving this problem.
    Regards,
    Jerry
    PortalPM

  • Default file type when save

    When I use Pages to edit a word document ".doc", for every time I save it,  Pages prompt to save as a new pages file, which is unnecessary. Can directly save to original file? TQ.

    You get the designed behavior.
    Pages is designed to be a .doc viewer,not a .doc editor.
    Even if you use a free Office clone, you will get the same kind of behavior because for these clones, the default format isn't .doc but  Text OGF whose extension name is .odt
    Several times, I posted here a script which we may run to change a Pages resource so that it will behave as a .doc editor.
    Go to my iDisk
    <http://public.me.com/koenigyvan>
    Download and apply once :
    For_iWork:touchIworkPlists.zip
    Yvan KOENIG (VALLAURIS, France) samedi 30 avril 2011 15:34:30
    Please :
    Search for questions similar to your own before submitting them to the community

  • ISo 5 crash when adding contacts.Anyone else?

    I updated my iPhone 4 from 4.3.3 to iso 5. And then I tried to add a few new contacts from my iPhone.
    Here goes the problem, I entered the number in the calling box, and I clicked on save button,asking me if I want to add to new contact. It crashed!!!!!!
    Then I dialed the number, trying to save it in recent calling. It crashed as well when I clicked on the blue arrow.
    Then I went into setting for contacts and mail, it crashed again!!!!
    One more thing, when I used iCloud to sync contacts,it crashed too!!!

    I've had a similar problem after updating my iPhone 4 to iOS5. Conatcts open but crash when I select any entry. The settings for contacts crash immediately upon opening. I've tried to restore iOS and data from the backup - without success. There is a message: 'Contacts can't be restored because they are "open" on the iPhone', which is not true. Interestingly, for me, the same contacts work fine on my iPad 1, even after updating to iOS5.
    I don't get it.

Maybe you are looking for