Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant  and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement  plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          -  Procurement type (maybe F)
          -  Special procurement (Maybe U)
          -  Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Similar Messages

  • How to find out the plants and storage location for a given company code

    hi
    How to find out the plants and storage location for a given company code

    Hi
    Check for Assignem,ent of Plant & compnay code in OX18
    & for Combination of Plant & Storage location in OX09
    The total org structure can be viewed in EC01 - Click on Structure  -> navigation
    & Continue, Click on the Compnay code & the wole structure can be viewed
    Thanks & Regards
    Kishore

  • Plant and Storage Location determination at Item level during Copy control

    Hello Freinds,
    We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
    Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
    Thanks,
    Anup Bansal

    Hello
    You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
    In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
    YOu can maintain the coding at same place.
    thank you
    Anirudh

  • Need to determine plant and storaeg location for item in delivery

    Hello All,
    I have an inbound IDOC which changes the quantity of items in a delivery and also adds new items if necessary. I need to do a auto PGI also if required.
    Am using BDC to update the delivery. Now the problem is when I add a new item to the delivery. I add the material, quantity and Unit recieved from the IDOC. I need to determine the plant and storage location and fill that too in the delivery.
    Kindly let me know how I can determine these two values. Which table holds this data?
    Please note that I am changing only the delivery. The document preceding the delivery wont be changed.
    Thanks for your help.
    Regards,
    Johnson

    normally the plant is determined on this basis:
    customer inforecord (table KNMT)
    customer master (KNVV)
    material (MVKE)
    The storage location is determined in table TVKOL based on:
    shipping point (you have it in delivery header LIKP-VSTEL)
    plant (see above)
    storage conditions (material master MARA-RAUBE)
    regards
    Roberto

  • During MRP run unwanted plant and storage location include and exclude

    Hi There,
    During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
    Thanks in advance.

    HI,
    To control whether a particular storage location will be included or excluded from the MRP run.  (MD02/MD41).
    To exclude it from MRP run :-
    OMIR - Define storage location MRP per plant
    Put the MRP ind. as.         1 - storage location stock excluded for MRP
    To include it from MRP run:-
    OMIR - Define storage location MRP per plant
    Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
    Next go to transaction MM01 - tick only view MRP 2
    Key in Plant and Storage Location
    Look at the Storage Location MRP section
    change the SLoc MRP indicator to space  and save it
    MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
    You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
    Regards
    KK

  • Material transfers between plants and storage locations report

    Hello experts.
    I´m looking for some help.
    Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
    Thanks for your help.

    Hi,
    Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
    or if you want storage location stock many reports are available like MMBE, or MB53 etc.
    Regards

  • Unable to set plant and storage location in Batch as required/mandatory

    Hi Experts,
    I am having a problem regarding field controls.
    I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
    I have follow the path below
    SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
    What i can see is field groups are being assigned to field name.
    My question is, where do we go to to set the field group?
    Thanks in advance!

    Hi Dex,
    You have gone to the right location.
    On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
    Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
    Hope this helps.
    Tarang

  • Creating material in multiple plants and storage locations

    Hi Gurus,
    I am wondering if someone could help me out in this issue,
    I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
    I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
    Any help highly appriciated and rewared.
    Thanks.

    Hi,
    To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
    A suggestion would be to use the BAPI's -
    BAPI_MATERIAL_SAVEDATA         Create and Change Material Master Data
    BAPI_MATERIAL_SAVEREPLICA      BAPI for Mass Maintenance of Material Data
    Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
    Regards,
    Vivek

  • Search shopping cart by plant and storage location?

    Hi,
    is there any standard report or anyway to search the shopping cart based on the plant and storage location..
    please let me know..
    thanks

    Hi ,
    Not directly as Yann says.
    But indirectly
    from SRM org structure -> ex attribute -> location
    go to yr desired plant
    get all the employees assigned to this plant
    In admin log in -> monitor shopping carts
    use these employees as requestors
    and search
    let us know if it suits your need
    BR
    Dinesh

  • Combination of Material,Serial Number, Plant and Storage location

    Serial Number needs to be fetched corresponding to material, plant and storage location. which tables to hit.
    Kartavya

    Hi,
    Please check table EQSE (OBJK -> EQSE).
    Regards,
    Ferry Lianto

  • Shipping in shipping point from plant and storage location is not possible

    Dear Experts,
    i am trying to configure STO with delivery scenario in my company
    after creating PO (sto UB) and delivery through vl10b when i try to do picking in vl02n and when i enter storage location its giving error
    "shipping in shipping pointxx from plant xxxxand storage location xxxx is not possible"
    i ve checked all settings
    1.plant and sh point assignment
    2. ovl2 sh point determination
    3.ovl3 picking location determination
    4 all master data cust n mat for loading group and shipping cond
    not able to find any solutions plz help
    Regards
    Supriya

    Check your entries in following options in SPRO path:
    IMG - MM - Purchasing - Purchase Order - Set Up Stock Transport Order - Setup Stock Transfer b/w Storage Location - Setup Storage-Location-Specific Shipping Point Determination
    Option 1: Define Rule for Determination of Shipping Point
    Option 2: Assign Shipping Points According to Storage Location (this should be there, if in Option 1 Determin. Rule; Shipping Point is L: Storage-Location-Specific Shipping Point )
    Regards
    JP

  • Material is blocked in Plant and storage location due to Physical Inventory

    Dear Experts,
    Our user trying "Post goods issue against 201 movement type,but its giving error message
    "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
       location 2101 due to a physical inventory".     
    we are not using any physical inventory here,give me sugestion.
    i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    Thanks in Advance
    varun

    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    Dear Experts,
    We have a simulation in our quality server,even though a physical inventory document is existed for the material,doc  status showing active in MI22,but its allowing me to issue goods,but its not allowing in our production system.
    please give

  • Material deletion at plant and storage location deletion at plant

    hI EXPERT,
    We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
    Thanks

    Hi,
    If you want to delete material at storage location level
    Enter MM17
    Select table MARD
    Select fields tab
    find MARD-LVORM
    Execute (F8)
    Enter list of materials
    Enter plant
    enter storage location.
    tick the field lvorm(carry out mass change)

  • Plants and storage locations..!!

    dear all,
    i have created one plant 2001 with storage location 1002 1001 respectivley. now i want to add more plants and storage locatons to that same company code..how to do.? can anyone tell me the step by step process.
    regards
    shaik.

    Dear,
    You can create more plants by the same way I have created plant  2001.
    - Tcode SPRO (IMG Customizing)
    > Enterprise Structure
    >> Definition
    >>> Plant Maintenance
    >>>> Maintain maintenance planning plant
    And the storage locations:
    - Tcode SPRO (IMG Customizing)
    > Enterprise Structure
    >> Definition
    >>> Materials Management
    >>>> Maintain storage location
    Best regards,
    Eduardo Junior

  • STO between plant and storage location MRP area

    Dear PP/DS experts,
    For some business requirements, I want to model stock trnasfer order scenario from plant to storage lacation MRP area but the system only make stock trasnfer reservation.
    In my EPR system, I maintainted storage location MRP area material with special procurement 45, then the transportaion lane is created between location 1200(location type 1001) to MRP area 1300(location type 1007).
    My question :
    1) Is it possible to make stock transfer order scenario instead of stock transfer reservation between plant and MRP area ?
    2) If possible, Is there something to do more in master data maintenance except mentioned above in ERP ?
    Thanks in advance for your help.
    Regards,
    Lee, Seung Won

    Hi,
    Yes you can perform intracompany STO (Plant to plant) and STO at Storage location level at the same time,
    We are using same for our client.
    http://www.architectsap.com/blog/sap/how-to-setup-stock-transport-order-between-two-storage-locations/
    Regards,
    Gopala.S

Maybe you are looking for