Default Podcast library change - Finder level.

I have a growing Podcast library that updates and downloads daily. I would like to change the default location from the main hard drive to a larger, external hard drive. In other words, I would like all the new episodes to default to the new external hard drive.
I don't see an obvious way to force this behavior. Does anyone have a clue?
Thanx in advance.

You'll have to move your entire iTunes library to the other disk. You cannot store an iTiunes library on more than one disk at a time.
Here's a good article describing how iTunes stores content and how to move it around:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/48
Good luck.

Similar Messages

  • How do I change the default iPhoto library for the Media Browser?

    I have multiple Aperture/iPhoto Libraries. When I open the new Keynote and attempt to use the Media Browser to select a photo, the pictures the Media Browser displays are not from the Default Libary.
    Is there a way to change the default photo library that the Media Browser references?

    Hello danstat,
    Thank you for the question.  The Media Browser accesses iPhoto's last opened photo library.  To access that photo library through the Media Browser, quit Keynote, access that photo library in iPhoto, quit iPhoto, and relaunch Keynote. 
    You can access the an alternate photo library using these steps:
    To switch between photo libraries:
    Quit iPhoto.
    Hold down the Option key as you open iPhoto.
    Select the library you want to switch to.
    Click Choose.
    iPhoto '11: Create a new iPhoto library or switch between libraries
    http://support.apple.com/kb/PH2505
    Alternatively, you can drag the photo in directly to youre Keynote presentation from the iPhoto or Aperture windows. 
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Best Practice: Dynamically changing Item-Level permissions?

    Hi all,
    Can you share your opinion on the best practice for Dynamically changing item permissions?
    For example, given this scenario:
    Item Creator can create an initial item.
    After item creator creates, the item becomes read-only for him. Other users can create, but they can only see their own entries (Created by).
    At any point in time, other users can be given Read access (or any other access) by an Administrator to a specific item.
    The item is then given edit permission to a Reviewer and Approver. Reviewers can only edit, and Approvers can only approve.
    After the item has been reviewed, the item becomes read-only to everyone.
    I read that there is only a specific number of unique permissions for a List / Library before performance issues start to set in. Given the requirements above, it looks like item-level permission is unavoidable.
    Do you have certain ideas how best to go with this?
    Thank you!

    Hi,
    According to your post, my understanding is that you wanted to change item level permission.
    There is no out of the box way to accomplish this with SharePoint.               
    You can create a custom permission level using Visual Studio to allow users to add & view items, but not edit permission.   
    Then create a group with the custom permission level. The users in this group would have the permission of create & add permission, but they could no edit the item.
    In the CodePlex, there is a custom workflow activities, but by default it only have four permission level:
    Full Control , Design ,Contribute and Read.
    You should also customize some permission levels for your scenario. 
    What’s more, when use the SharePoint 2013 designer, you should only use the 2010 platform to create the workflow using this activities,
    https://spdactivities.codeplex.com/wikipage?title=Grant%20Permission%20on%20Item
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • 5800 Deleting Podcast Library to remove General Sy...

    When I try to play Podcasts from my Podcast Library I receive a general system error. This happens when I try to play from any option eg "All episiodes", "by Title"  "by published date" etc.Podcasts title come up but selecting them leads to the general system error message.
    I  can play downloaded podcasts from the "podcasting" section where I have downloaded them.
    This thread tells how to delete Tracks and Album Art from Music Library but does not mention podcasts
    /discussions/board/message?board.id=topfaq&thread.​id=106
    Trying to delete through the option menu only gives the error message.
    Any idea how to delete the Podcast Libray information?
    Any other ideas how to solve this?
    Thanks

    I had a similar problem - I had previously deleted podcasts (removed via mass storage mode - oops) that were still listed in the Music library>Podcasts that wouldn't go away. Trying to delete them via the phone gave a "General system error" warning.
    First I tried :
    @romainb
    >* Firstly, connect your phone to a PC via USB.
    >* Choose Data Transfer (a.k.a. Mass Storage). Do not select PC Suite because you won’t be >able to browse protected folders in PC Suite mode.
    >* Open Windows Explorer on your PC.
    >* Go to \private\101FFC31 on the phone’s folder.
    >* There, you should be able to find the mpxv1.mpd (for MP3) and pcv5.mpd (for AUDIO >PODCAST)
    >* Goto \private\101f8857\Cache
    >* Goto \private\101ffca9
    >* In all the 3 folders delete all the files Not the FOLDER
    >* Now refresh ur music library
    Nothing changed or at least I've not yet found out what changed...
    Then I tried:
    @ XploitMachine
    >- Open Windows Explorer
    >- Open E:\Private folder
    >- Open 101ffca9 Folder
    >- Delete harvesterdb.dat file
    >- Delete the E:\Private\10281e17
    >- Disconnect phone from PC
    >- Turn device OFF then ON back again
    except that I didn't turn the phone on/off (missed that bit) just opened the music library. Phone checked for new music and podcasts.... Yay! Everything back into it's proper place and no more phantom podcasts.
    Thank you!

  • ITunes freezes when i try to open Podcasts library

    Every time i click on Podcasts library, the app freezes!

    try these user tips:
    try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
    and, if you have flip4mac installed
    I found that the TSLicense plugin was causing the problem.
    From the log:
    PlugIn Path: /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense
    PlugIn Identifier: net.telestream.license
    This pIugin is installed with the Flip4Mac Windows Media Components. I solved the problem by uninstalling the WM Components via the uninstaller at /Applications/Flip4Mac/Flip4Mac WMV Uninstaller.pkg, after which iTunes opens successfully.
    JGG

  • How to default payment term from Site level

    Hi All,
    When creating an Order, the payment terms are defaulting from the defined defaulting rules.
    As per the defaulting rules, it is supposed to pick as following seq..
    1 Related Record - Invoice To.Payment term
    2 Related Record - Ship To.Payment term
    3 Related Record - Customer.Payment term
    4 Constant Value - TBD
    Now, as per the rule, it is picking the Payment term from Invoice to level. If there is none defined then it is picking from the Customer level as we never define at Ship To level.
    Now my question, is there any way we can implement to pick the Payment term from the Site level when Invoice To payment term is not defined.
    Please let me know if any additional info is required.
    Thanks.
    Edited by: R on Oct 18, 2012 10:06 AM

    R wrote:
    Hi All,
    When creating an Order, the payment terms are defaulting from the defined defaulting rules.
    As per the defaulting rules, it is supposed to pick as following seq..
    1 Related Record - Invoice To.Payment term
    2 Related Record - Ship To.Payment term
    3 Related Record - Customer.Payment term
    4 Constant Value - TBD
    Now, as per the rule, it is picking the Payment term from Invoice to level. If there is none defined then it is picking from the Customer level as we never define at Ship To level.
    Now my question, is there any way we can implement to pick the Payment term from the Site level when Invoice To payment term is not defined.
    Please let me know if any additional info is required.
    Thanks.
    Edited by: R on Oct 18, 2012 10:06 AMDo you mind modifying the defaulting rule to have site level in between Invoice To.Payment term and Ship To.Payment term. Were you not able to change?
    Thanks
    Pradeep

  • How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

    How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

    SamanthaR22 wrote:
    How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?  [Emphasis added.]
    The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with.  "Picture" and "Photo" now mean different things in different contexts.  In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do.  Understanding is the path that allows us to do it.
    All pedantic, but please stick with me here  .
    You record a set of instantaneous data with a camera.
    That data is processed by your camera and saved to a file.
    The file format is usually either RAW or JPG.
    You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
    From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
    Aperture links the Image and the imported file.
    The imported file is called, within Aperture, an Original.
    Every Image has an Original.
    The Image is not the Original.  The Image is what you see in Aperture.
    The Original is a file that is stored on your computer.
    You can make changes to an Image.
    Aperture calls these changes Adjustments.
    Adjustments are saved to another file attached to the record in the database.  Let's call this file the Changes File.
    Aperture uses these two files attached to the record in the database to create the Image.
    Image = Original + Changes File.
    The Image is not a file.
    Because the Image is not a file, it cannot be shared with other programs.  It exists only inside of Aperture.
    In order to share an Image with another program, you must first create a file of the Image.
    You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
    You may ask, "Why all the complexity?  Why doesn't Aperture save Images as files?"  The answer is simple:  Images can require less — and in many cases very very much less — storage space than files of Images.  Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file.  The gain in storage efficiency is huge.  The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
    Here is your question reworded with more precise terms:
    SamanthaR22 might have written:
    How do I access Images in my Aperture Library in the Finder?  I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
    No, there is not.  Images exist only in Aperture, and are not accessible for use in other programs.  You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
    Aperture does allow you to create and save within your Library share-able files of your Images.  These files are called Previews.  You specify the file parameters in Aperture Preferences on the Previews tab.  These files are available to other programs via the OS X Media Browser.  These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
    HTH.
    —Kirby.

  • "Check that you have permission to write to the library directory." I had this error pop up when trying to access a iPhoto Library from Finder.

    The error, "Check that you have permission to write to the library directory." Displayed after trying to access a iPhoto Library from finder. The file is located on the local hard drive and was accessed not 5 minutes before the error displayed. Upon searching the forums I found a similar problem and the instructions said to check a permission box in the "Get Info" tab. There was no box visible and after clicking the arrow to open the "Open With" tab, the rainbow wheel started to spin and I could no longer access Finder or the desktop. I was deleting files trying to make space on my hard drive and noticed as I was deleting files more data was being added to the iPhoto Library. My question is how can I fix this and how can I prevent this in the future, thank you very much for any help, I would really like to keep these pictures.

    I found a similar problem and the instructions said to check a permission box in the "Get Info" tab.
    This applies only when the Library is on an external drive. You cannot ignore permissions on the system drive.
    I was deleting files trying to make space on my hard drive
    What were you deleting?
    and noticed as I was deleting files more data was being added to the iPhoto Library.
    Hard to see how deleting files can add data to the iPhoto Library. Can you explain why you thought this?
    I would really like to keep these pictures.
    Make a back up now.
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Love Acrobat XI, but when I installed it became the default program to open all my photos.  I'd like them to open in theirr native (JPEG, etc. format) How do I disable the PDF default conversion ? Cant' find anything in Preferences that works.

    Love Acrobat XI, but when I installed it became the default program to open all my photos.  I'd like them to open in theirr native (JPEG, etc. format) How do I disable the PDF default conversion ? Cant' find anything in Preferences that works.

    Sounds like a file association issue in Windows. Right click on the files of interest and select Open With>Choose Default Program and select the program you want used (be sure the "always use" box is checked. The Acrobat installation should not have done this change, but this is the process to make the change on each file type.

  • How do I manually import a .mov file and add it to my podcast library?

    Hi all,
    I'm a fan of "theshow" by zefrank and when I finally discovered it was available via iTunes, I subscribed. However, iTunes does not pick up all the early episodes.
    I found that I could download them onto my desktop as .mov files - but I can't seem to get them into my Podcasts library - only the Movies library.
    Any advice?
    TIA.

    BUMP
    On the same note, I have some podcasts that are listed in iTunes (and exist in the ~/Music/iTunes/iTunes Music/Podcasts folder) but will not play. I can play them via the Finder though.
    Is there any way to tell iTunes where the files are? (I thought we used to be able to do this in previous versions.)

  • How can I get movie trailers out of Podcast Library?

    I recently started watching movie trailers in iTunes - it's great fun. I decided a good way to keep track of movies I'd like to watch is by downloading the trailer. However, some of the trailers are showing up in my Podcast Library - I really don't want to see them there. They have the right genre - Movie Trailer - and I don't know any other tricks to get them out of there. Does anyone know how to do this?
    Thanks!
    -jwt

    Open the enclosing folder, choose Go to Folder from the Finder's Go menu, and provide Library as the path.
    (80699)

  • Default Business Rules at AppSet level

    Hi Experts,
    Once you create a new AppSet by copying AppShell and add a "Consolidation" type application with all business rules, a default "Business Rules Library" is generated at AppSet level along with "Business Rule" within Application. The "Business Rules Library" at AppSet level includes "Consolidation Rules" and "Consolidation Methods". In my BPC 7.5 MS SP04 these default business rules table is empty, whereas it used to come with values pre-filled in it in earlier versions. I discussed this with one of the BPC NW consultant and he confirmed that for BPC 7.5 NW this issue was there that those values were there on backend but was not visible from the frontend Admin Console. After applying some patch in BPC 7.5 NW, it becomes visible in Admin Console Business Rules Library at AppSet level.
    Can anybody using BPC 7.5 MS version confirm whether they are getting these values by default or they are entering it manually.
    Edited by: Amitkumar Shyamanand on Jan 25, 2011 11:18 AM

    You may need to confirm with SAP Support, but I beleive that the latest versions of 7.5 on Microsoft has a very slimmed down version of AppShell, and that the business rules are not included in the process.  Best if you get an Appshell from version 7 and create you copy which will then have all the Appset Business RUles.
    Hope this helps.

  • Workflow for Changing Item Level Permission in SharePoint 2013 (Office365)

    I am using OOTB Tasks List in SharePoint 2013 (O365). Now my scenario is like this:
    I have two user groups: 1.Sales Managers 2. Sales Executives
    Sales Managers can create & assign task to Executive.  I want something like Sales Managers Can view all tasks (Which is by default view of tasks list i.e. perfact) but Executives can see only their tasks assigned to them. How can I achive this?
    Can I use WorkFlow for this to Change item level permission or to assign permission to assigned to user? or JS
    Can anyone have proper solution? thanks

    1. make 2 SharePoint group 1>Sales Managers 2>Sales Executives
    2. Show 2 WP of same task list in same page.
    3. Use Audience Target for Sales Managers Sharepoint group in first Webpart property. (All
    Iten view)
    4. Show "My Task" view (assign to =[Me]) Bottom WP for same task list and use Audience Target for Sales Executives. Or if you want it to see
    Sales Managers as well, the dont use any Audience Target.
    Bottom line - SharePoint group use in Audience Target will do the trick. OOTB
    Regards Sudip Misra [email protected] +1-412-237-5435 Pittsburgh, PA

  • Podcasts not showing in ipod podcast library

    Since getting my new PC and transferring my library across my podcasts no longer show within the Podcast library on my ipod, they do show correctly on iTunes, they are only shown in the music library which is hardly convenient.
    I have updated my ipod software to the latest version to see if that corrected it but it hasnt, I have reset the ipod settings on the player itself and that hasnt made any difference.
    My movies, music videos and TV shows all show as snormal just not the podcasts.
    Anyone else come across this? Anyone else got any suggestions on how to fix this, or know how to resolve this issue?

    Recheck the podcast settings the next time you connect to your PC. Sometimes the setting defaults back to not syncing any podcasts. This happened to me once. For no reason I couldn't get my podcasts loaded on my ipod. I checked my settings and I had to reset it. No problems since then.
    Reg

  • Podcast Library Web app

    I have begun working on a simple Web portal for the Podcast Library. The source code is available at https://github.com/jamiehodge/alarm. Please note that it is a new project and is far from feature complete.
    I hope some of you will find this helpful.
    Regards,
    Jamie Hodge

    Hello,
    I am working on the same thing however I am finding out it is more for public use then private.
    When you submit a podcast it gets sent to a link http://subdomain.yourdomain.com:8071/podcastproducer/catalogs
    This link is accessible to the outside world as long you have port 8071 forwarded to your SLS server.
    I would like to know how to lock down this link so you have to login to view. I do not want this open to the public. If you have podcast capture setup via the web it does require you to login to view.
    I think at this point you need to use the link above to send your podcasts to the public and publish your podcast you want to lock down to a Wiki Page in order to lock it down.
    I am testing this now to confirm. I will post back what I find.
    Thanks!
    ebrind

Maybe you are looking for