Default port 8889 to 8080

Hello all,
where I can find the oracle webserver config file to be eable to set defoult port for forms to 8080 ?
edo

hello
Please tell me what is your configuration of server?
Which forms and listener u r used?
Are u using webdb listener? If u r using Webdb then there is \listener\cfg directory there is wdbsvr.cfg file and SERVER_PORT = parameter u just set ur port no to that parameter.

Similar Messages

  • Change XML DB default HTTP port number from 8080 to ... ?

    Hi !
    I need to change the default port number of XML DB from port 8080 to something else, because the development server also hosts a web service, which is configured to listen on port 8080 for debugging reasons. This WS is provided by our partner and we have no control over the ports it uses.
    I'm not a network prof. so I'd like to ask what other port number would make sense for XML DB instead of 8080. Can I choose any port number I like, e.g. 8088?
    Besides using DBCA is there any other place I need to configure this new port number?
    TIA,
    Stefan

    I've done this on occasion using the OEM attach to the database and click XML Database then configuration, you will see it on the right window pane.

  • Changing SSH default port from 22 to 8080

    Hi all,
    I have deployed SSH on my home solaris 10 x86 machine and it was working fine through the default port 23.
    But the problem is that i can't connect to it from work as the firewall blocks outgoing SSH traffic. So i want to change the default port from 23 to 8080.
    i changed the value of Port in /etc/ssh/sshd_config.
    Then i ran the command
    /usr/lib/ssh/sshd -f /etc/ssh/sshd_config
    because as far as i know from the man pages it will cause the daemon to reread the configuration file thus the new value for port but still it didnt' work.
    Also i tried the command
    /usr/lib/ssh/sshd -p 8080
    but didn't work also
    I tried to restart the ssh daemon after both commands but still the same result.
    Would anyone please help me with this issue as i still don't have much experience in solaris.
    Thanks in advance.

    Ok, So i installed lsof, but
    When i ran that command i got this output
    bash-3.00# lsof -M | grep 8080
    sshd 1085 root 3u IPv6 0xd43e21c0 0t0 TCP *:8080 (LISTEN)
    it seems that sshd is occupying port 8080 but still ican't login from a remote machine.
    When i try it asks me to enter the username and then displays a messaing "Using keyboard-interactive authentication" then asks for password, When i enter the password it gives me "Access denied" although iam sure this is the right password.
    When i try to connect to port 22 things go fine and i can login with the same user "root" with no problems (i know accessing remotely using root is not secure but that is not the problem for the moment)
    So i did that
    ps -ef | grep ssh
    root 1085 1 0 19:05:07 ? 0:00 /usr/lib/ssh/sshd
    root 1093 1 1 19:05:51 ? 0:00 /usr/local/sbin/sshd
    Note that the PID for the process grabbing the port is the same for /usr/lib/ssh/sshd
    so is that the ssh daemon or is it /usr/local/sbin/sshd ????
    Please advise. Note that iam not experienced in solaris so please take it easy with me.
    Thanks

  • How can we change default port 8080 of application express

    Hi all,
    Does anyone know how to change default port 8080 in application express to run on only "80"? I have tried the following link, but when i am trying to run using 80, error is being thrown.
    http://www.mypi.ch/?p=33
    I have checked that no other thing is running on 80 port. I am using Windows Vista
    With Regards,
    Sunil Bhatia

    I am really a newbie in this application express field.
    I have installed oracle application express 3.2 over oracle 10G Database as per steps provided on forum. Can you let me know how can i find which webserver i am using? is there any query which i could run to find this out...thanks for ur help. Do reply soon
    With Regards,
    Sunil Bhatia

  • What is the oc4j's default port?

    What is the oc4j's default port? I want to type the address in browser's address bar and see the default page of oc4j (ex.: http://localhost:8080)
    Thanks
    sávio

    hi,
    in the local machine it is 8889
    and the default in the aPP SERVER IS 7778
    you can change them but i dont know how,for the app server its easy,but I had never try to change it in the local.
    good luck

  • Changing Tomcat Default Port.

    Hi.... All
    How can i change the default Port (8080) in Tomcat.
    In Which file do i need to change this manually.
    thanx

    change this on the server.xml,
    the connector part.
    <Connector port="8080" maxHttpHeaderSize="8192"
    the port attribute here

  • VPN PPTP Default Port

    Hello all,
    sorry if this question has already been asked, but I couldn't find anything via search.
    I have a VPN PPTPD Server running (somewhere on the internet) and it's a Debian machine. I configured it not to run on default port but to use 8080. My question ist now; ho can I tell the default VPN client of OS X (10.6) to connect on my custom port.
    The thing is, that it works with default port very fine, but as soon as I change it to 8080 I cannot connect and if I put "myserver.com:8080" in the server field, then it seems like it could not be resolved.
    I would be very greatful for any kind of hint.
    Thanks in advance!
    Best regards,
    Kamil

    up !
    Please let me know if you got the hack.

  • How can we change the default port 50000 of SAP WAS?

    Hi,
    1. How can we change the default port 50000 of SAP WAS?. Can we assign 8080?
    2. Can we assign default context ("/") for the application we have developed?
    Regards,
    Sudheesh

    Hi Sudheesh,
    just refer this help..
    http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
    U have to restart the sever after changing the port.
    One more main thing here , no other services must not be using the port.
    It will cause port binding exception.
                  Regards
                  Kishor Gopinathan

  • How to get Port Forwarding to 8080 working on HH2

    Hi,
    How can I get port forwarding to 8080 working on my HomeHub2?
    I have a QNAP TS219P NAS connected via wired Ethernet to my HomeHub2.
    This has a Web Administration facility that should enable me to access & manage the NAS over the Internet.
    I have set the NAS to have a fixed IP address of 198.162.1.100 and enabled a dyndns account to point to my ISP WAN IP. I then used Application Sharing on the HH to forward all traffic to 8080 to the NAS device (called "Kermit" in my case).
    However, using http://mysite.dyndns.org:8080 simply brings up the admin page of the Home Hub.
    Despite the HH telling me the port is forwarded correctly, http://www.canyouseeme.org reports the port as - "Error: I could not see your service on nn.nn.nn.nn on port (8080) ...Reason: Connection refused"
    My HH firewall is set to "Default" (Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed.), but I have tried disabling it and this made no difference at all.
    I know that dyndns and port forwarding are working in other respects, since I also set the NAS up as a Web Server with a simple home page, and forwarded port 80 on the HH through to the NAS. Requests over the Internet for the http://mysite.dyndns.org:80 home page work fine...
    There's nothing in the HH Event log that I can make sense of and I'm going mad...
    Is anyone able to talk me through some good ideas of how to progress this?

    Another thing I thought of- did you setup the port forwarding to forward to your named IP address or to the hostname?
    I would recommend setting the port forwarding to your named IP address:
    http://192.168.1.254/app_config.lp?be=1&l2=0&l0=2&l1=4
    In this menu (Application Sharing -> Configuration, select "User Defined" in Device. A textfield entry box appears below device and hardcode 192.168.1.100 in there).
    Finally, any logs on the QNAP for your external connection attempts? - Could it be passing through the HomeHub and then get rejected by the QNAP?

  • Default Ports

    I am trying to configure Adobe Connect Pro 7.5 to work in an environment where the port 80 and port 443 are blocked.  I am required to have them use a port 8080 for http and port 44443 for SSL.
    How do I change this in Adobe Connect Pro 7.5

    With the software using ports 80 and 443, does it enforce sending usernames
    and passwords thru the 443 connection?  Concern is not wanting to send
    passwords over an unencrypted connection.
    Ps.  Thanks for the answers
    From:  Heyward Drummond <[email protected]>
    Reply-To:  <[email protected]>
    Date:  Tue, 15 Nov 2011 14:53:02 -0700
    To:  Randy Breland <[email protected]>
    Subject:  Default Ports
    Re: Default Ports
    created by Heyward Drummond
    <http://forums.adobe.com/people/HeywardDrummond>  in Connect General
    Discussion - View the full discussion
    <http://forums.adobe.com/message/4027941#4027941>
    Correct. See this as well: The following table describes server ports that
    Adobe Connect uses to communicate internally. These ports must not be in use
    by any other process or program on a server hosting Adobe Connect, or Adobe
    Connect may fail to start.  Adobe Flash Player on the client side expects to
    talk to Adobe Connect Server on port 80 then port 443 and then port 1935.
    Maybe using proxies you can fool around with those ports but I think you are
    headed for performance and network issues if you don't conform to the ports
    the product weas designed to use natively.
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either reply
    to this email or visit the message page:
    http://forums.adobe.com/message/4027941#4027941 To unsubscribe from this
    thread, please visit the message page at
    http://forums.adobe.com/message/4027941#4027941. In the Actions box on the
    right, click the Stop Email Notifications link. Start a new discussion in
    Connect General Discussion by email
    <mailto:[email protected]ms.
    adobe.com>  or at Adobe Forums
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
    Type=14&container=2193>  For more information about maintaining your forum
    email notifications please go to
    http://forums.adobe.com/message/2936746#2936746.

  • How to change the default port of webdispatcher

    Hello Everyone,
    We wish to  know to how to change the default port of SAP webpatcher port from 81$$ to 80.
    Appreciate your response.
    Thanks,
    Vadi

    Hello Vadi
    you have to change the PORT value in your profile parameter from 81$$ to 80
    icm/server_port_0 = PROT=HTTP,PORT=81$$ to
    icm/server_port_0 = PROT=HTTP,PORT=80
    Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
    $$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
    thanks
    Bhudev

  • How to change default port in iws 4.1 installed in Solaris 5.9

    Hi All,
    I had installed iws 4.1 in solaris 5.9
    Now , I want to change my default https port from 443 to 445 .
    Can anybody , Please let me know the proceudre how to do it ?
    Thanks for help in advance.
    Regards
    James

    Ya , Manish you are right IWS 4.1 is really old.
    But My application has been developed in past that is using IWS4.1 .
    Right now , we are not having budget to migrate it from IWS4.1 to IWS6.1.
    And the pointer for changing the port from magnus.conf is also correct but
    I need to make it default port.
    That means If would not specify any port number out of two port request goes to default one.
    Right now default port is 443
    But I want it to be 445
    Thanks
    James
    Message was edited by:
    write2jamesbond

  • How to change default port in 9.2?

    Hi,
    In 8.1, when I run config wizard, I may assign listening port. But I could not do so in 9.2. I tried to modify startscript.xml and tokenValue.properties under base_domain\init-info\, it did not work. Does anyone know how to change the default port 7001 to other port?
    Thanks

    <p>Login via the console, select environment, servers. Select your server, you should see the greyed out Listen Port attribute (you should be in the general tab). Click lock and edit on the top left hand corner of the console and edit your listen port.</p>
    <p>The config.xml does not explicitly define stanzas for some default values (Same as earlier releases), I personally don'tlike this. If you change the default value it should reappear in it.</p>
    <p>
    Hussein Badakhchani</br>
    </p>

  • How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

    Hi Team ,
    We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
    But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
    We are using 1900 port for existing 11.2.0.1 grid infra scan.
    While up gradation it is taking default port of 1521 insted of existing port 1900.
    Please provide the solution to use non default port while 11.2.0.2 up gradation.
    After upgrade the status as below.
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
    Here I was getting TNS:no Listener errors from the client connections.
    I have modifyed the scan port then it is working fine.
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
    grdoratst104:/apps/grid/grdhome:+ASM4>
    Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
    Thanks
    Bala
    Edited by: user12032334 on May 31, 2011 11:46 AM

    Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
    So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
    As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
    This can be fairly easily done using iptables if your o/s is Linux. You need to:
    a) create a pre-routing NAT rule
    b) create a post-routing NAT rule
    c) create a forwarding filter rule for port 1900/tcp
    d) create an input filter rule to accept traffic on 1900/tcp

  • Default port for J2SE Adapter Engine?

    Hello all,
    what is the default port for J2SE Adapter Engine? How do I restart this adapter engine?
    Regards,
    N.S

    Swamy,
    8200 is the default port. Also go through this help of how to start and stop the J2SE Adapter Engine:
    http://help.sap.com/saphelp_nw04/helpdata/en/12/5dd23aaad7b3408dde3c1577fda5b3/frameset.htm
    ---Satish

Maybe you are looking for