Default Port Problem on re-install

I want to be able to do a re-install of Oracle 11g and still use the default 1521 port. When i remove the old oracle DB that was there and do a new install, it adds 1 to the port everytime. So the next time I install it would be 1522 then 1523 etc. Are there files i need to clear or something I need to do to make sure if i remove a oracle install and do a new one on a server that it will get the default 1521 port? I know i can go back after install and do all the changes, but it jsut seems to be a lot of work for nothing when it should be doing it at install. I don't believe there is anyway to choose that port during install that I have seen.
I'm using 64bit 11g on a 64 bit Linux OS.
Thanks.

I used the remove installed products option on the 11G disk, 'Oracle Universal Installer'. I then removed the associated data files.
Was there more steps? The only problem I seem to run into is with each re-install it ups the port numbers from 1521 to 1522 etc.
On some tries I even removed the whole default /u01/app/ora* directories and recreated them like I would on a fresh install. Still no luck.
Edited by: ChaosAD on Oct 7, 2008 10:09 AM

Similar Messages

  • Install oracle 10xe listner port  problem

    hi,
    i hv use fedora 4 and oracle 10g xe univ.rpm install in fedora 4 ,
    but when i hv configure database
    /etc/init.d/oracle-xe configure
    then listner default port is 1521 i hv enter and message is display this port is another application is use pls enter another port . i hv enter 1522 port
    its a problem for database if listner port is change?
    after 1522 port is enter database succsfully load

    Ramkrishna,
    it is no problem to run the listener on port 1522.
    Regards, Marc

  • How to change default port in iws 4.1 installed in Solaris 5.9

    Hi All,
    I had installed iws 4.1 in solaris 5.9
    Now , I want to change my default https port from 443 to 445 .
    Can anybody , Please let me know the proceudre how to do it ?
    Thanks for help in advance.
    Regards
    James

    Ya , Manish you are right IWS 4.1 is really old.
    But My application has been developed in past that is using IWS4.1 .
    Right now , we are not having budget to migrate it from IWS4.1 to IWS6.1.
    And the pointer for changing the port from magnus.conf is also correct but
    I need to make it default port.
    That means If would not specify any port number out of two port request goes to default one.
    Right now default port is 443
    But I want it to be 445
    Thanks
    James
    Message was edited by:
    write2jamesbond

  • Problems with default ports when sending email from Mail

    Anyone know how to get around this, when trying to send an email from Mail on my Mac? :  "Connections to the server ' ' on the default ports timed out. Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent."
    It appears when connected to my new wifi at home. Incoming mails appears.
    Thanks!

    The default email account selection is when you are outside of the Mail client only.
    If you are in your MobileMe account's Inbox or Sent mailbox when selecting new message, your MobileMe account is the default account used, and the same for your work account.

  • Changing SSH default port from 22 to 8080

    Hi all,
    I have deployed SSH on my home solaris 10 x86 machine and it was working fine through the default port 23.
    But the problem is that i can't connect to it from work as the firewall blocks outgoing SSH traffic. So i want to change the default port from 23 to 8080.
    i changed the value of Port in /etc/ssh/sshd_config.
    Then i ran the command
    /usr/lib/ssh/sshd -f /etc/ssh/sshd_config
    because as far as i know from the man pages it will cause the daemon to reread the configuration file thus the new value for port but still it didnt' work.
    Also i tried the command
    /usr/lib/ssh/sshd -p 8080
    but didn't work also
    I tried to restart the ssh daemon after both commands but still the same result.
    Would anyone please help me with this issue as i still don't have much experience in solaris.
    Thanks in advance.

    Ok, So i installed lsof, but
    When i ran that command i got this output
    bash-3.00# lsof -M | grep 8080
    sshd 1085 root 3u IPv6 0xd43e21c0 0t0 TCP *:8080 (LISTEN)
    it seems that sshd is occupying port 8080 but still ican't login from a remote machine.
    When i try it asks me to enter the username and then displays a messaing "Using keyboard-interactive authentication" then asks for password, When i enter the password it gives me "Access denied" although iam sure this is the right password.
    When i try to connect to port 22 things go fine and i can login with the same user "root" with no problems (i know accessing remotely using root is not secure but that is not the problem for the moment)
    So i did that
    ps -ef | grep ssh
    root 1085 1 0 19:05:07 ? 0:00 /usr/lib/ssh/sshd
    root 1093 1 1 19:05:51 ? 0:00 /usr/local/sbin/sshd
    Note that the PID for the process grabbing the port is the same for /usr/lib/ssh/sshd
    so is that the ssh daemon or is it /usr/local/sbin/sshd ????
    Please advise. Note that iam not experienced in solaris so please take it easy with me.
    Thanks

  • Default Port 80 occupied by oracle apachiserver

    hi all,
    I have to face a problem.i have install oracle 9i on my machine and Oracle Appachi server Occupied Default port 80.When i Write this address in address bar
    http://localhost/ than it open the oracle Server,but i have install Wampserver 2.0 and i want to run it.
    any help how can i overcome this problem,because i want oracle also on my machine.
    thanks in advance.

    Hello,
    If you don't need apache server, just stop it.
    If you need Apache server, go to <ORACLE_HOME>\Apache\Apche\conf directory and check line Listen in httpd.conf and replace port 80 with another number.
    BR

  • Default port for sms

    I've developed a midlet which is initialized by sms with PushRegistry.
    the sms would contain both plain info and special info for the midlet (should the receiving device have one installed).
    my goal is that if the receiving device doe's not have the midlet installed, it would just receive a plain sms.
    my problem is that i dont know to which port the receiving device is listening to, therefor if the receiving device has the midlet installed, then everything is OK , but if not then nothing happens.
    is there a default port that all devices are listening to regardless to their manufacturer or operating system?
    because if so, i can let my midlet listen to the same one.
    thanks, eran

    What do you mean saying "default port"? Do you want to catch standart SMS from your midlet?
    You can not recieve standart SMS (from one mobile to another) in your java application, you can only send standart SMS.
    Could you post your code, that throwing this exception, here?

  • TS3276 Does anyone know the YAHOO authentication method and port? I recently installed the new OSX 10.8.2 software and my mac mail wont work.

    Does anyone know the YAHOO authentication method and port? I recently installed the new OSX 10.8.2 software and my mac mail wont work.

    Hello,
    I have no idea what you're talking about, however my Mail stopped working when I
    had to add a new e-mail address for my Hotmail account.
    My new Hotmail address works, and seems to get e-mail from the old e-mail address,
    which from I've read behaves as a "default" address for the old address.
    Apple Mail is linked to my Hotmail account of the old e-mail address.
    I no longer know my old password.
    Apple Mail will not accept my new password for ny new Hotmail account.
    Can someone help me solve this problem WITOUT COMPLICATED SOLUTION!
    As I said I have no idea what a port, or SSL or authentication is!
    If you do answer,please answer in vert simple steps that are easy to follow, and donlt make matters worse.
    Thanks,
    SB

  • How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

    Hi Team ,
    We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
    But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
    We are using 1900 port for existing 11.2.0.1 grid infra scan.
    While up gradation it is taking default port of 1521 insted of existing port 1900.
    Please provide the solution to use non default port while 11.2.0.2 up gradation.
    After upgrade the status as below.
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
    Here I was getting TNS:no Listener errors from the client connections.
    I have modifyed the scan port then it is working fine.
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
    grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
    SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
    SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
    SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
    grdoratst104:/apps/grid/grdhome:+ASM4>
    Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
    Thanks
    Bala
    Edited by: user12032334 on May 31, 2011 11:46 AM

    Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
    So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
    As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
    This can be fairly easily done using iptables if your o/s is Linux. You need to:
    a) create a pre-routing NAT rule
    b) create a post-routing NAT rule
    c) create a forwarding filter rule for port 1900/tcp
    d) create an input filter rule to accept traffic on 1900/tcp

  • What is the default port on visual administrator with 2004s

    Hi
    I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
    I want to lauch the visual administrator but unable to connect
    its saying cannont connect to ip and port....
    What is the default port for the first time login
    Also,
    went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
    JF

    Hi Jean
    The default port for VA is 5XX04 (where XX is the instance number)
    the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
    Hope this help
    Juan
    Please reward with points if helpful

  • LIGHTNING ADAPTER has fused to the USB port that is factory installed in my car.

    LIGHTNING ADAPTER has fused to the USB port that is factory installed in my car.  It will not release from the port and the port is no longer working as a result of my efforts to retrieve the USB cord.  I have been an iPhone owner since the first release in 2007.  I have never had a problem with my Apple products and have remained an enthusiastic, loyal customer.  It is my understanding that Apple only has "extra" USB cords in Apple store.  I live in a rural area without access to an Apple Store.  Retailers and Carriers did not receive shipments of extra charging cords.  This is unacceptable.  I am absolutely at a loss because my port in my brand new car is not longer functioning and will likely have to be replaced, AT MY EXPENSE. My "Lightning" cord is literally stuck in my vehicle.  My phone is currently sitting at Radioshack being charged so that I have at least a charge when I head out of town on business early tomorrow morning.  Suggestions please as I am a VERY unhappy customer!

    This happened to me and a bunch of others as well. https://discussions.apple.com/thread/4321665?start=0&tstart=0

  • FWSM Default port channel?

    I'm doing some L2 cleanups across mutliple 6509E environments and I've found something consistent that I can't find in documentation.
    On all my pairs of 6509s where I have FWSMs bundled (6509-A has FWSM-1 is Slot 1 and 6509-B has FWSM-2 in Slot 1) I also have a port channel 305. Obviously when I do a "show run" or "show int desc" I don't see anything in slot one. It's a service module. But the port channel is referencing ports 1/1-6. And it's all in service/up. I was about to delete this as I thought it was some leftover config (TEST 6509s) until I went and saw the same things on our PROD 6509s. Can anyone explain this or provide some documentation on it? Is it cosmetic? Necessary? Can I delete it as part of my audit cleanup? Don't want to mess with it even in TEST without some information. Nothing on google that's clear and I can't find anything on CCO.
    6509-1#sho etherch 305 summ
    Flags:  D - down        P - bundled in port-channel
            I - stand-alone s - suspended
            H - Hot-standby (LACP only)
            R - Layer3      S - Layer2
            U - in use      N - not in use, no aggregation
            f - failed to allocate aggregator
            M - not in use, no aggregation due to minimum links not met
            m - not in use, port not aggregated due to minimum links not met
            u - unsuitable for bundling
            d - default port
            w - waiting to be aggregated
    Number of channel-groups in use: 11
    Number of aggregators:           11
    Group  Port-channel  Protocol    Ports
    ------+-------------+-----------+-----------------------------------------------
    305    Po305(SU)        -        Gi1/1(P)       Gi1/2(P)       Gi1/3(P)      
                                     Gi1/4(P)       Gi1/5(P)       Gi1/6(P)      
    Last applied Hash Distribution Algorithm:   -
    6509-1#sho etherch 305 det 
    Group state = L2
    Ports: 6   Maxports = 8
    Port-channels: 1 Max Port-channels = 1
    Protocol:    -
    Minimum Links: 0
                    Ports in the group:
    Port: Gi1/1
    Port state    = Up Mstr In-Bndl
    Channel group = 305         Mode = On      Gcchange = -
    Port-channel  = Po305       GC   =   -         Pseudo port-channel = Po305
    Port index    = 0           Load = 0x41        Protocol =    -
    Age of the port in the current state: 46d:06h:53m:39s
    Port: Gi1/2
    Port state    = Up Mstr In-Bndl
    Channel group = 305         Mode = On      Gcchange = -
    Port-channel  = Po305       GC   =   -         Pseudo port-channel = Po305
    Port index    = 1           Load = 0x02        Protocol =    -
    Age of the port in the current state: 46d:06h:53m:39s
    Port: Gi1/3
    Port state    = Up Mstr In-Bndl
    Channel group = 305         Mode = On      Gcchange = -
    Port-channel  = Po305       GC   =   -         Pseudo port-channel = Po305
    Port index    = 2           Load = 0x04        Protocol =    -
    Age of the port in the current state: 46d:06h:53m:41s
    Port: Gi1/4
    Port state    = Up Mstr In-Bndl
    Channel group = 305         Mode = On      Gcchange = -
    Port-channel  = Po305       GC   =   -         Pseudo port-channel = Po305
    Port index    = 3           Load = 0x88        Protocol =    -
    Age of the port in the current state: 46d:06h:53m:41s
    Port: Gi1/5
    Port state    = Up Mstr In-Bndl
    Channel group = 305         Mode = On      Gcchange = -
    Port-channel  = Po305       GC   =   -         Pseudo port-channel = Po305
    Port index    = 4           Load = 0x10        Protocol =    -
    Age of the port in the current state: 46d:06h:53m:41s
    Port: Gi1/6
    Port state    = Up Mstr In-Bndl
    Channel group = 305         Mode = On      Gcchange = -
    Port-channel  = Po305       GC   =   -         Pseudo port-channel = Po305
    Port index    = 5           Load = 0x20        Protocol =    -
    Age of the port in the current state: 46d:06h:53m:41s
                    Port-channels in the group:
    Port-channel: Po305
    Age of the Port-channel   = 46d:06h:55m:56s
    Logical slot/port   = 14/11          Number of ports = 6
    GC                  = 0x00000000      HotStandBy port = null
    Port state          = Port-channel Ag-Inuse
    Protocol            =    -
    Fast-switchover     = disabled
    Load share deferral = disabled  
    Ports in the Port-channel:
    Index   Load   Port     EC state        No of bits
    ------+------+------+------------------+-----------
      0     41     Gi1/1    On    2
      1     02     Gi1/2    On    1
      2     04     Gi1/3    On    1
      3     88     Gi1/4    On    2
      4     10     Gi1/5    On    1
      5     20     Gi1/6    On    1
    Time since last port bundled:    46d:06h:53m:41s    Gi1/6
    Last applied Hash Distribution Algorithm:   -
    NOC-SW-ITEST-AGG1#

    The connection between the FWSM and the switch is a 6-GB 802.1Q trunking EtherChannel. This EtherChannel is automatically created when you install the FWSM.
    http://cisconetwork.org.ua/1587051893/ch04lev1sec1.html
    http://www.cisco.com/en/US/docs/security/fwsm/fwsm23/configuration/guide/switch.pdf
    Thanks
    Ajay

  • Web Enterprise Manager Default Port Number in Oracle 9i

    Enabeling Auditing on database 9.2.0.8
    Web Enterprise Manager Default Port Number in Oracle 9i:
    Does anyone know the default port number of the web enterprise manager (Oracle 9i)?
    If I installed or configured enterprise manager and I forgot the port, where can I find it?

    You must read the part in the Installation Documentation for certified repository databases to ensure that your database is OK.
    My advice is always, never start any installation (not only Oracle) without reading the Documentation, Release Note and any README.
    You will spend less time in the installation as Configuration if you use the required documentations for your platform.
    http://www.oracle.com/pls/db102/portal.portal_db?selected=21

  • Default port of Oracle 9i Database --- Oracle database installation

    Hi,
    I am new to oracle..searched across internet to know this particular detail of Oracle 9i database installation.
    My query being..Can Oracle database be installed in a way to use port's other than 1521. When do we go for making use of a port other than 1521. What are the risk's and benifit's.
    How to make use of a port other than 1521 while making use of OUI(oracle universal installer) to install a 9i database on windows OS.
    Can someone provide an answer to my queries/ some link where I can find the answer.
    Thanks,
    R S

    you have to change the port no in listener.ora file which exists on Oracle_home/network/admin/listener.ora like
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1521))
      )from this to
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1522))
      )afterwords you have to reload the listener by using lsnrctl on command prompt
    in this way you can change the default port of Oracle
    Regards
    Singh

  • Sles poa not listening on default ports

    we dbcopied the domain and post office from netware 6.5.8 to sles 10 spk2, gw7.0.3.
    installed mta, poa and gwia... the poa starts but is not listening on ports 1677, 7181 or 7101 all default ports.
    all 3 agents are running on the host... these ports are not being used by any other service....
    any ideas... or has any seen this....

    * waketech,
    firewall is down?
    Uwe
    Novell Knowledge Partner (NKP)
    Please don't send me support related e-mail unless I ask you to do so.

Maybe you are looking for