Default ports groups for iptv and iptv control server

is there a default group for iptv and default ports for different types of communication

I was able to take a look at the system here at work:
Under "Preferences" in the Content Manager, the first category of configurable parameters are for Multicast Addresses.
If you keep the default (Global)it uses 224.2.X.Y, and allows you to set the TTL's to set the multicast diameter.
The Administratively Scoped multicast addresses are 239.255.0.0 - 239.255.255.255. You can also set a TTL.
Global SSM addresses are 232.0.0.0-232.255.255.255
Admin Scoped SSM addresses are 239.232.0.0-239.232.255.255
Near the end of that section, you can choose which address range will be the default, and I believe "Global" (224.2.X.Y) is the "default" default.
The only ports listed are for Multicast Announcement (9874) and RTSP (8554) both are UDP.
Good Luck
Scott

Similar Messages

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

ISE: create rules with AD groups for Users and Computers

Hello,
We've just begun to work with ISE.
Is it the good place to post on ISE, or there is a dedicated forum in another place?
We'd like to create some rule depending of Computer member groups AND Users member groups from AD, but we meet some difficulties.
We've created AD groups for Computers and Users depending of their Department:
Users_1
Users_2
Computers_1
Computers_2
When we create some basics rules regarding one group only:
- with a group Computers_x to attribute a specific VLAN to a computer (when no Windows session is opened), it runs correctly.
- with a group Users_x to attribute a specific VLAN to an user (when Windows session is opened), it runs correctly.
But when we create a rule regarding a group from Computers and one from Users, to attribute a specific VLAN to an user on a specific computer, this rule is not applied.
Is it possible to use ISE on this way?
Thanks for help.
Regards,
Chris

Enable EAP Chaining— if you want Cisco ISE to allow authentication of both machine and user in the same EAP-FAST authentication.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_80_eapchaining_deployment.pdf

Selection groups for tables and header tables

A couple of questions or rather observations around Selection Groups for tables and conversion objectu2026
1) For tables that do not really have a date field, for instance table PDSNR, it appears that you cannot specify a selection group. Consequently, you have to transfer the table in its entirety. Is this something that can be modified via customizing?
2) And what about the header tables, for example, X_ANLC, I have tried but not able to change the selection groups on these objects.
Thanks!
Harmeet

Hi Harmeet.
Since you mention you can only filter by date I am assuming you are using TDTIM.
How would you want to filter PDSNR, for example? Would it want to filter all entries >= a given sequence number?
The only way I know to do that is to work directly with the configuration tables. In your case you will need to use CNVMBTSEL* tables. Check how the standard selection groups are configured, and it should not be too difficult to follow the same logic and create your own selection groups.
CNVMBTSELGRP                   MBT PCL Selection groups              (main table to create the selection group)
CNVMBTSELMEMTYPE               MBT PCL Selection group member types (main table to define members => fields for the selection group)
CNVMBTSELGRPDEF                MBT PCL Selection group definition    (definition of the fields in that selection group)
CNVMBTSELGRPVAL                MBT PCL Selection group values        (values for each field; you can use GE for >=)
CNVMBTSELCLAUSE                MBT PCL Selection group clause        (should also be straightforward if you are using only one field)
CNVMBTSELVAR                   MBT PCL Selection group variants     (configure the same variant for your selection group as for the others)
CNVMBTSELREF                   MBT PCL Selection group reference     (assignment of selection group to conversion object)
Hope this helps,
Rui Dantas

Change default port number for web logic!

Hi folks,
In my scenario, i already installed obiee 11g with simple install along with web logic on windows xp machine.where this will creates default port number for all services. now i want to change default port number of web logic that is 7001 to some to other port number. how to change this ??.plss help me asap.
regards,
mahesh

Refer tohttp://www.oracle.com/technology/documentation/1012_solaris/install.1012/install/ports.htm

Steps for portal and Microsoft LDAP server integration

Hi,
Could any one guide me steps for portal and Microsoft LDAP server integration. Need it urgently.
Thanks in advance.
Regards,
Niraj

Please don't cross post in multiple forums..

Database componentes required/excluded for RMAN and Grid control repository

I'm planning creation of a centralized 10gR2 RMAN repository for my production/dev environment, and needed a basic, barebones database. We may also use that same database as a repository for 10g OEM Grid Control in the future, so I wanted to ensure I was prepared for that.
None of the documentation says anything about particular required components for RMAN, only that a database is needed. So am I allowed to deselect all items from the following DBCA list? I didn't expect any problems with the optional components, but wanted to make sure that RMAN or Grid control would function, were I to disable Oracle JVM or XML DB. My standard loadout (for better or worse) is to include everything in my production/dev databases, and I didn't want that to be the case with this one.
Database Components:
Oracle Data Mining
Oracle Text
Oracle OLAP
Oracle Spatial
Enterprise Manager Repository
Standard Database Components:
Oracle JVM
Oracle XML DB
Oracle Intermedia

Thanks. For that matter, do DBA's in the general population install those standard oracle components? I have them there in my default installs just because of the message 'Oracle recommends you have these installed.' in the DBCA screen.

Change default port used for FlexUnit reports

Good day,
I have recently set up a CruiseControl server that runs two concurrent builds. Most of these builds contain FlexUnit tests. I am well aware that the default port for FlexUnit task is 1024 and I know that only one listener can access the port at one time. I tried passing a different port number but the flexunit task hangs. So, I was wondering if anyone has tried changing the default port to something other than 1024.

Hi Michael,
I created a bug for tracking, as you requested (https://bugs.adobe.com/jira/browse/FXU-153).

Default zoom factor for bookmarks and hyperlinks

In Acrobat Prof. 8.1.2, is it possible to set a default zoom factor for
newly created bookmarks or for hyperlinks referring to pages in the same
document? Is it possible to change the zoom factor for all such hyperlinks
in one step without having to edit each of them individually?
Andreas

That book needs so much clean up I don't think you can fix it, sorry.
I'd start over - again, apply the above child's book example to start another book.
Be sure to replace the boiler plate text/images with yours, then reposition....don't just dump yours on top of them.
If you can't use the child's book TOC example, search here on the topic, but don't ignore the minimum requirements in any case.
And again, use Pages or InDesign if you want more control over your e-pub.
Good luck.

Shipping point not defaulting loading group for materials

Hello all,
I would like to know how to set up a particular shipping point defaulting to particular loading group for certain group of materials. would this change has to be done manually in the material master or is there any customizing changes that has to be done for this change.
Thanks,
Maxx

Maxx,
This sounds like standatd Shipping Point Determination.
1. Create a Loading group for your material
> Logistics Execution > Shipping > Basic Shipping Functions > Shipping Point and Goods Receiving Point Determination > Define Loading Groups
2 Assign that new Loading Group to your material(s)
> Tcode MM01, MM02
3. Assign combination of Shipping condition, Loading Group, Plant, & the desired Shipping Point
> Logistics Execution > Shipping > Shipping Point and Goods Receiving Point Determination > Assign Shipping Points

Nexus 1000V - port-profile for VSM and VEM on same host

Hello,
I'm trying to run the VSM and VEM on the same host. At first I connected the VSM to the vSwitch. This works fine. Then I tried to move the VSM behind its own VEM.
I have 3 different VLANs for management, control and packet traffic. Is it possible to connect the three VSM interfaces (management, control and packet) to only one port-profile, in which these three different VLANs are configured in a trunk? Or do I have to configure for each interface a separate port-profile, if I am using three different VLANs?
Thanks
Tobias

Hello,
The VSM does not emit VLAN-tagged frames. Therefore, its ports need to be configured in access mode. If your Control and Packet VLANs are the same, you could use the same port profile for both.
Please make sure that the access VLAN is a system VLAN for all three ports.
On a related note, if the VSM's storage is on NFS or iSCSI, the storage vmknic needs a system port profile as well. More info at:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg_5vsm_behind_vem.html

How do i use an active directory group for vpn and not all user

hi all,
i have an asa 5515x...
how do i use a particular group in active directory to have vpn/anyconnect access? right now i believe it's for all user on my current config,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
!integrate with active directory
aaa-server LDAPSERVERS protocol ldap
aaa-server LDAPSERVERS (vlan192) host 10.0.0.2
ldap-base-dn dc=company,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password 12345678
ldap-login-dn cn=administrator,cn=Users,dc=company,dc=com
server-type auto-detect
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
say i want this "vpn-group" object group in AD and my vpn is only anyconnect and no other vpn types.
thanks for any comment you may add.

The best way is to use Dynamic Access Policies (DAP). Cisco has a white paper (here) that shows how one can choose the LDAP group as one of the DAP criteria.
DAP requires the Advanced Endpoint Assessment feature, so your licensing must support that.

Any ideas for security and parental control software yet???

Just received two of the touchpads from the fire sale and gave them to my kids, both under 10. I am very interested in limiting the sites that can be accessed through the browser, as well as a few other things. Has anyone found a practical means of doing this? I'd hate to give up on this and switch it over to Android, especially since there is only Gingerbread available. But, I just don't know what else I can do about these. Any ideas?
Thanks!
Post relates to: HP TouchPad (WiFi)

Please take this post with a grain of salt. I don't claim to be a security and parental control software expert, but I have researched these solutions and have some personal experience with them. That being said, here's some ideas to get you started.
As speedtouch mentioned, OpenDNS is a fantastic solution for website filtering. They have a great set of filters that can be customized and are one of the easiest systems to set up. Simply install an updater app on one of your desktop computers (or directly on your router if it's supported), configure your router to use their DNS servers, and you're good to go. I personally use this system mysefl and it works really well. The only downside in my experience is that there is not a temporary override system (at least, not in the free version that I use). An example of when this might be handy: my wife goes clothes shopping and looking at new bras. Every once in a while, a perfectly legitimate site might get blocked (in this case, probably something I don't want my kid looking at but perfectly fine for my wife). The option to "temporarily override the block" or "temporarily allow" the site would be nice, but it doesn't exist.
Another FANTASTIC solution that I've used in the past is the Astaro Security Gateway. They have a free home version of their "Software Appliance" that goes above and beyond OpenDNS. I haven't used it in a while, but when I did it was able to not only filter web sites but also monitor Instant Messaging and other online activites. It's a bit more involved as you need your own hardware (I used an old computer with 2 network cards and stuck it in between my router and my broadband modem), but the results are pretty powerful.
The downside to all these solutions, however, is that they will only work when the TouchPad is on your network. If they connect to a neighbors network of if the go to a friends house, all of these systems will be moot because they are completely bypassed. The only way to monitor that content from ANY network would be to install an application on the device itself and to my knowledge, none exist.

Logfile groups for Primary and Standby

Hi,
Oracle documents say that the size of Log files should be the same for primary and Standby. Presently it is not the case. I have logfile 100M for Primary (PROD) and 50M for Standby. To change them I should add new groups with file of 100M to standby. And then drop the small logs(50M). in this case the group number would not be the same. Would it be a problem ? Any other solution ? Thank you.

.Oracle documents say that the size of Log files should be the same for primary and Standby. It is only a recommendation, but, not mandatory. However, a messaage will be written to the standby alertlog file when standby database log file size is smillar than its primary database log file size.
in this case the group number would not be the same. Would it be a problem It won't be a problem.
Jaffar

Default ports groups for iptv and iptv control server

Similar Messages

Maybe you are looking for