Default print tray keeps reverting to Tray 1, asking for glossy paper on HP P3015

We have a new HP P3015 at work, and a few days ago it started defaulting to Tray 1, and asking for Glossy paper. I have followed all onscreen instructions for changing print tray multiple times, and tried hard booting the printer a couple of times. There is no paper in Tray 1, and it is shut. For each print job, I must walk over to the printer and press OK to change print trays, and OK again to print. How can I clear these settings so that the printer will revert to printing from Trays 2 and 3 without having to walk over and change it for every job?
It also started printing much more slowly that when we first set it up a couple of months ago.

switch off the printer, take the paper out of the tray, reassemble the paper properly, then put the paper back and switch on the printer, it should work
or just change the paper specificationo in A4 legal paper it should work then
slseattle wrote:
My printer suddenly started refusing to print normal jobs on standard 8 1/2 x 11 paper. It shoots out a blank sheet with the edge slightly crimped for about 1 1/2 inches, about 1/2 inch from the bottom of the sheet. It displays the message "Paper mismatch. Paper size or type is incorrect." I have no idea what is causing this problem. It had printed perfectly up until now, but it has given the same error message for the last several different job attempts, and I'm stumped.
I look into the printer from the paper tray and above, and see no obstruction. Any ideas?
Thanks for your help!
slseattle wrote:
My printer suddenly started refusing to print normal jobs on standard 8 1/2 x 11 paper. It shoots out a blank sheet with the edge slightly crimped for about 1 1/2 inches, about 1/2 inch from the bottom of the sheet. It displays the message "Paper mismatch. Paper size or type is incorrect." I have no idea what is causing this problem. It had printed perfectly up until now, but it has given the same error message for the last several different job attempts, and I'm stumped.
I look into the printer from the paper tray and above, and see no obstruction. Any ideas?
Thanks for your help!

Similar Messages

HT4061 Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please

Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please help

The IMEI number is stored in iTunes:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
I can't imagine that any police agency in the world would request this information.

Keeps asking for Photo paper

I have tried everything to fix this problem but to no avail.I am using a Mac,Ipad and an android phone. Cant print with any of them. I tried setting the paper size using the mac but no good. I set the paper size to 81/2 x 11[no change] set to shrink to fit [no change] set to [plain paper best still asking to load Photo Paper.
Dont know what else to do.

OK, that makes more sense.
When using the HP ePrint app for pictures it will default to photo paper, 4x6in/10x15 cm.
You will need to touch the option paper along the top
Then chose size.
Change from 4x6 in to Letter - 8.5x11 in.
Along the top (where you chose size) touch type
Choose Plain Paper. (This option will not be there if you left the size at 4x6)
These steps I got from an iPad, on an Android device it is a little different.
When you have the preview of your picture up (It will say preview in the upper left hand corner of your display), you will
notice two icons in the upper right hand corner. one looks like a picture of mountains, the other a piece of paper with a gear in the lower right hand corner.
Touch the paper with the gear. You will now see your settings. Again it defaults to 4x6 in and photo paper.
Touch paper size to to change it to 8.5 x 11 in. Touch more options to change the paper type.
If this did not help, try uninstalling the app and then installing it again.
I hope you found this useful.
If that fails, please call our Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

I keep getting a pop up asking for my voicemail password. I can simply press cancel and it goes away, but it happens frequently and often during a text or email. Is there a way to stop this? I don't even have a voicemail password.

I keep getting a pop up message asking for a voicemail password. I can simply touch cancel and it goes away. Put it pops up quite frequently during texting, chatting or email. Is there a way to stop this? I don't even have a voicemail password.

Contact your carrier; they are the only ones who can resolve this for you. Use the Carrier Luke,
"Fun with the Sun, MEta"

I keep getting a dialogue box asking for my iCloud ID number on my Mac. I have to put it in several times before it finally accepts it. However, mu iCloud is working anyway.

I have a MacBook Pro, using Mavericks. A couple of days ago, a box keeps popping up asking for my iCloud ID. I have to put it in several times before it finally accepts my ID. However, when I just get frustrated and cancel it, my iCloud still works anyway. Is anyone else having this same problem?

If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.

Why do I keep getting a popup window asking for a Yahoo password... I do not know how to disable this?

I keep getting a popup asking for the Yahoo password... even when I am not online... it is very annoying... what do i do?

Please Update to the latest Firefox 19.0.x version.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version
*https://support.mozilla.com/kb/Updating+Firefox
The Firefox Firefox 17.0 version that you currently run is no longer supported with security updates.

When i restore ipod keeps taking it back to asking for a passcode

I have restored it more than once but it keeps asking for a passcode even when I take it to factory settings. How can I take it back does anyone know?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

HT201485 I cannot remember my iCloud password. Caption keeps coming on the screen asking for password

while operating my iPad 2 it keeps asking for icloud.com password which I do not remember. Caption keeps coming on the screen. Very frustating.

Hello monanikhil,
Welcome to Apple Support Communities.
It sounds like you’ve forgotten your Apple ID password, which your iPad is prompting you to enter. The article linked below outlines both the process and options for resetting your Apple ID password.
If you forgot your Apple ID password - Apple Support
Cheers,
-Jason

Printer preset keeps reverting to last used 10.6

I want to default to a greyscale every single time I print. Currently the greyscale preset stays as long as I do not use another preset to print with.
I can set the default temporarily by using shell commands:
defaults write com.apple.print.custompresets.forprinter._3rd_Floor_Copier com.apple.print.lastPresetPref 'Grayscale'
defaults write com.apple.print.custompresets.forprinter._3rd_Floor_Copier com.apple.print.lastPresetPrefType 3
but as soon as I use another preset to print with it overwrites the changes I made and defaults to using the last settings used.
I'm thinking I might have to edit something in com.apple.print.PrintingPrefs.plist
It currently looks like:
bplist00’
_ !com.apple.print.lastCSProfilePath_ kLocationHistoryArrayKeyTMP^DefaultPaperID_ UseLastPrinterAsCurrentPrinter_ perprinterpresetdefault_ ;/System/Library/ColorSync/Profiles/Generic Gray Profile.icc° “
Any suggestions? (OS X 10.6.4)

bobfromdetroit wrote:
I want to default to a greyscale every single time I print. Currently the greyscale preset stays as long as I do not use another preset to print with.
Any suggestions? (OS X 10.6.4)
The preset system is designed to be fast and flexible. For the kind of control you are looking for, you need to think outside the preset system. Instead of building 1 printer with 2 presets, build 2 printers, each with one 1 preset. Configure the first with grayscale or draft, then make that printer the default one in your print & fax prefs.
This will override any actions in any app that might temporarily use other settings.

IChat 6 changed group name to Facebook but keeps reverting to Buddies, an fix for this?

I want the group "Buddies" to be named "Facebook", I have no problems changing it, it just won't stick for more than a few minutes at a time before
it reverts back to "Buddies" again.
I find this very annoying, is there a fix for this?
NB: I have tried pretty much everthing I can think of, I hope someone here will have the answer I'm looking for.
TIA
andrew

Hi,
Most likely this is a second Login issue.
It can depend on where you are logged in and with what app and the abilities and priorities that login has ((which somewhat depends on Screen Name /Buddy list type)
AIM Accounts (Any Screen Name that logins in to AIM)
These can have Multiple Logins including a web Log in (web SIte) an AIM Express login, another App and /or another computer. (The web site Login could have default Login period as long as two weeks if you don't specifically Log Out)
So in this case when you change anything via one login the other "Corrects it" due to the constant feedback for both logins.
One Exception if the "Group" called Recent Buddies
In iChat 4 and Above this "group" can be turned On or Off display-wise in the Accounts part of the iChat Preferences.
It holds names of people that have contacted you that are not in the Buddy List itself.
The List is held at the AIM servers and you only have Read Access (You cannot delete people from this list unless adding them to the Buddy List itself)
It used to be possible to Delete the whole group but I have not tried this for a while (Since iChat 3)
I have not tried to rename it but I doubt that it can be.
Multiple Login Effects
When you login in to AIM twice, particualrly in iChat on two computers or Different apps on the same computer, you have two Buddy List telling the AIM servers who is in the Buddy List and what the groups are that they are in.
Although Adding something is easy and will appear in the other Buddy List (such as a new Buddy or a new Group) editing Groups or deleting Buddies is almost impossible.
Jabber Acounts (Facebook, Google and other Jabber Logins)
Logging in to the Google Site (the Gmail Web page or iGoogle pages) where chat is available has the same priority as the iChat App. Whichever was the last login will then tend to take preference.
Most Jabber apps can alter the Priority
This measn your Home computer, Work Cmputer and phone for instance can have different priorities set so messages get sent to the "right" one at the right time.
If your Login is not the highest Priority one then you are unlikely to be able to edit any Group names or Delete Buddies.
Obviously for most people with Google IDs the issues is being logged in to the web site.
As Facebook is also a Jabber server with a web site login available this should be considered as well.
Check both Google and Facebook's default Login time if you don't ever Log Out as a specific action.
(Quitting the page does not Count)
Very few Jabber servers have Web Site Logins (Jabber Australia does as the only one I know of).
I am not aware that you can access the Chat options from those that do (check them individually)
However second logins via Adium or ProteusX may well effect things if they are set to higher priorities.
8:51 PM Thursday; August 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I keep getting a pop up asking for my iCloud password. How can I stop this annoying pop up

i password

Yes, it is a good idea to use Find My iPad. To sign out without losing anything, do the following:
If you're running iOS 8.1, save any start by saving any my photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then Save Image. Then go to Settings>iCloud, tap Sign Out, choose Delete from My iPad and provide your password when prompted (any iCloud data will still be in iCloud). Then sign back in (any iCloud data will download back to your iPad).

Where is the button called "tools" that Firefox keeps refering to when I ask for help with something?

In order follow their directions for some help, I am told to use a button called "tools". Where is the darn thing?

OH! There it is!! I knew it was a simple quest. Just can't get my head around everything this century requires in order to function effectively. whew. Thanks again, woof,
Susan

I keep getting a pop up asking for my yahoo email password.

I have cancelled my yahoo account and deleted it off my computer but continue to get a pop up asking for my yahoo password. I look in settings under mail and the yahoo account is gone, but when I go to address book>prefrences and click on account my mac it shows the yahoo email address under account information and the box is unchecked. How can I get rid of that and stop the pop ups. Than you

Contact your carrier; they are the only ones who can resolve this for you. Use the Carrier Luke,
"Fun with the Sun, MEta"

Setting Default Printer via GPP

We have several PC Labs for our Students, and normally we have 2 printers per lab. We would like to have half of the lab printing to one printer and the other half of the lab printing to the other printer. I have been successful in deploying
the correct printer to the PC's, but cannot seem to get the Default Printer set.
I created 2 Computer Groups for the Labs, then used Item level Targeting to determine which group gets which printer. Regardless of where I set the Default Printer - either as part of the Computer Group Policy (Under User Configuration) or as part
of the Students' Default Login policy - the printers still do not set as Default.
I'm fairly new to GPO and GPP creation, so I could use all the help I can get.
Thanks

Randal,
you may be facing this issue:
https://support.microsoft.com/en-us/kb/2787598?wa=wsignin1.0
But anyways, you can find 4 workarounds in that doc to start with.
Jan

Authentication asked for when using network printer... why

I have a printer set up on a windows vista PC, there is no password or authentication set up on this PC, But when I set up the printer from my iMac I am continually asked for authentication, however there is no password etc set up, just open sharing of printers. Coulsd some one asst please?

You say it's networked. How?

Default print tray keeps reverting to Tray 1, asking for glossy paper on HP P3015

Similar Messages

Maybe you are looking for