Default Profit center for balance sheet account

Dear All
I've problem when i display accounting document in billing, there is no profit center information in GL account VAT,since document spliting is not activated,so I maintain default profit center for balance sheet account (3KEH),.
can anybody tell me why this problem raised? where that i have missed the configuration?
Thanks And Regards
Adit

Hi Vijay,
Good day!
I would like to seek your advice regarding the default profit center for Balance Sheet Account:
We have this issue that BS account defualted to a certain profit center: I have done several testings but still cannot find why the BS account defaulted to the profit center
1. I have checked the FAGLBK3EH and the BS account in which PC defaulted is not maintained in this tcode.
2. also check the OBBH and the document does not contain any cost object wherein a profit center can be derived. also checked substitution, either both of this code does not defines the profit center im searching for.
Can you please advice some directions where to check and why certain profit center defaulted to balance sheet account.
Your advice is greatly appreciated.
Janice

Similar Messages

Depriciation Posting happens to Default Profit Center for Balance Sheet Act

Dear Experts,
I am facing problem in SAP where when I run Depriciation for Co Code B the system is picking up Default Profit Center for Balance Sheet Account GL Account while it is picking up proper Profit Center for P&L GL Account from Asset Master in the Depriciation Document AF.
Can you please advice what exactly customization to i need to check since Depriciation for Co Code A is happening properly for CO CODE A.for P&L and B/S GL Account.
Regards,
Rahul

Hi Rahul,
When you want to have the profit center in your balance sheet account you should make the field cost center optional in the field status group from your asset reconciliation accounts.
The system need this to determinate the profit center (no cost center is filled in)

Assignment of Default profit center to Balance sheet Account

Hi Gurus,
Is it possible to assign default profit center to balance sheet accout code ?. If it is possible how to do?
Many thanks,
Panneer

Transaction code: 3KEH
1. Define account(s)
2. Next, click on PrCtr Determination
3. Then, under Maintain Entries, click on Rule Values and complete the settings here.
Elias
Edited by: Elias Akorli on Dec 7, 2009 3:49 PM

Default Profit Center for Retained Earnings Account

Hi,
We wish to default a profit center for our retained earnings account. Currently, the system carries forward P/L balance to Retained Earnings Account Profit Center wise.
Kindly advise on how we can default a particular PC for retained earnings account. Also in case it is possble, does the system balance the PC wise trial balance by changing balances in Inter PC Balancing account (Zero Balance Clearing)?
Thanks!

Dear,
You can default through 3KEH in classic GL and through FAGL3KEH in New GL
Br, Vivek

Matrix Consolidation Profit Center for balance sheet acounts

Hi,
I have a situation within a matrix consolidation setup. Balance sheet items that do not necessarily have profit center assignments do not flow into BCS. I created a condition for Consolidation Profit Center in the Load Data stream method as follows to resolve that issue:
Condition If profit center = initialized (blank)
Move: constant 9999999
Condition: If profit center = 10000000-ZZZZZZZZ
Move: Profit Center.
This is resolved the issue partially. The load program reads the data however also creates a warning message that data records were ignored.
All these ignored data records are a copy of the 99999999 profit center records that have already been read.
I would really appreciate any inputs.
Thanks and Regards,
Pallavi

Pallavi,
I didn't get you.
I meant these Breakdown Types:
0 - No breakdown
1 - Optional breakdown. Initialized value allowed
2 - Required breakdown. If no entry is made, the default value is set.
3 - Required breakdown. The value must be entered; the default value may be entered.
4 - Required breakdown. The value must be entered; the default value may not be entered.
Subassignment are used with items, not with companies or profit centers.
Cannot understand why the role matters.
Please clarify.

Dummy Profit Center in Balance Sheet Account

Hi Profit Center Guru,
I have a lot dummy profit center posting from B/S accnts from the below kind of type:
1) Bank Account
2) Inventory Account
3) WIP Account
4) customer/vendor reconciliation account
5) Tax account
6) Accrual Income account
7) Other Manual B/S GL Posting
Could you advice? whether those dummy posting from B/S must be eleminated? and normally how to eleminate the dummy profit center posting?
Thanks a lot for your comments/opinion.
Regards,
Kick

Hi,
If you want to avoid any posting to dummy profit center maintained in 3KEH, you must ensure that you have properly defined rule to derive profit center. You will have to explore the following different ways of deriving correct profit center so that system does not take dummy for posting:
1. For Inventory accounts, maintain prfoit center in material master. Make it a compulsory field in material master.
2. Make profit center as compulsory entry in FI postings through changes in field status groups.
3. Derive profit center based on cost center, cost center to be made as compulsory field in FI entries in such cases.
4. Use Derivation and substitution rules to derive profit center.
5. Use Business Area for deriving profit center.
6. For posting through MM and FI, SAP has provided Badi AC_Document, in ECC 5.0 onwards. This can be used to derive profit center.
Depending upon your settings in the system., you can choose appropriate option suitable to you, to derive profit center.
Thanks and regards,
Sanjay

Default Profit Center to Bank Clearing Account

Hi All,
Currently, our company is one company code to one bank account and one bank account use by different profit centers ( Bussines Units) . Our reporting ( Balance Sheet / Profit & Loss ) is by Profit Center Level.
1. Default Profit Center to Bank Clearing Account.
- we cannot create cashflow report by profit center, because bank clearing account is default by profit center.
2. Not default Profit Center to Bank Clearing Account
- We got Profit Center 9999 / P9999 issues on Bank Clearing Account.
Should we default Profit Center on Bank Clearing Account ?
Thank You
Alex Lee

Hi Alex,
If you are using 4.7 or ECC 5.0 then you needs to maintain Default profit Center for Balance Sheet G/Lu2019s through T. code 3KEH and 3KEI, else if you are working with ECC 6.0 then you need to maintain default profit center for Balance Sheet G/Lu2019s through T. code FAGL3KEH and for Profit and loss related G/Lu2019s / Cost elements profit centers derivation rule can be maintained through T. code OKB9 accordingly.

Cost center empty in general ledger view for balance sheet accounts

Hi !
We are implementing ECC6 with new GL functionalities. We activated differents scenarii: cost center, profit center and segment.
Using FB03 (display document) we noticed that in the entry view, everything is fine: cost center, profit center and segment are filled successfully.
However, in the New GL view, the cost center is not filled for balance sheet accounts.
Any solution?
Regards,
Julien

HI,
Cost center will never be filled for the Balance Sheet account. For Balance sheet account Profit Center is required to be filled.
Don't be afraid this is the fundamental practice across the globe. Cost centers will be filled in only Expense account.
Exception to above rule is Asset master will recieve cost center because this will help in determining asset per department.
Regards,
Chintan Joshi.

PCA report for balance sheet accounts

Hi,
i have assigned Profit Center in Material.
So the Cunsumption account hit the Profit center.
If i see the GL document profit center assigned at line item, but i couldnot able to view the PCA report for Balance sheet account
Can you please help.
Thanks,
Sudha

Hi Wamman,
We are in ECC 6 and New GL is not activated.
Clssic PCA maintained PC in 3KEH.
Assigned PC in Material Master consumption entry Consumption (P&L) to Inventory (B/S)
Consumption (P&L) updated with Profit center and PCA document created
Inventory (B/S) line updated with Profit center but PCA document was not created.
Kindly help
Thanks,
sudh

Upload plan data for balance sheet accounts

Hi Experts,
Is there a way to upload plan data for balance sheet accounts? I can upload revenue/cos and expenses through the profit center and cost center uploading but need to upload balance sheet accounts as well. Any help would be much appreciated. Thank you.

Loading balance sheet accounts using the Excel load to profit center tells me that I selected balance sheet accounts that cannot be entered manually. Not sure what this means... if I have an accounts receivable account, how would I find another equivalent account?

Report S_ALR_87013336 - Profit Center Group: Balance Sheet

Hello All
As an output of this report (S_ALR_87013336 - Profit Center Group: Balance Sheet ) I expect :-
1. B/S recon accounts which has received PC assignment from 1KEK.
2. Other B/S accounts (Inventory etc) which received PC assignment while normal goods movement FI posting.
I am getting the part 1 but not part 2 . I have tried running it with specific account number for Inventory as well but it doesnt come up. Please help
Also it is showing in the output even the Expense account linked to PC . Not sure if there is check in the report itself to only pick B/S accounts. I know this can be worked around by creating Account Groups but want to know the nature of this report.
Best Regards

Hello Ajay
Nice question and honestly i crossed that as well before, BSEG has separate number of entries for Company code for different profit centre.
So I have many profit centres on which posting has happened.
Is it some thing to do with we being on ECC platform and not used NEW GL ? Does SAP reports on this field only when NEW GL is activated ?
Because not just this report but other GL line item report (S_ALR_87012282 - G/L Line Items, List for Printing ) also shows same balance with / without profit centre.
What I am planning to do is to copy FSV to PCA account group using KE5B and then run all 1KE* transaction + use PCA report for example (S_ALR_87013326: Profit Center Group: Plan/Actual/Variance) ?Hope it will work , your opinion on this.
Best Regards

Budget Control for Balance Sheet Accounts

Hi All,
How can we manage budgets for Balance sheet Accounts such as Fixed Assets, IT Infrastructure, Capital Work in progress etc.,
Thanks,
Srikanth

Hi Mr Vemuri,
The acount will appear in the budget setup if you go to:
Financials -> Chart of Accounts -> Select the account -> 'Account Details' -> check the box 'Relevant to Budget'.
By default only Profit and Loss accounts are included in the budget setup.
I tested this in:
2005B
2005A SP01
2007A
I hope this helps.
Regards,
Jesper

Business Area is not pulling for Balance Sheet Accounts

Hi,
For few Balance Sheet GL Accounts (From MM side), Business area is not pulling while doing MM Cycle. For other Balance Sheet GL Accounts (From MM side), system is pulling the Business area by default.
I have checked all the Field Status Group configuration and all. Still could not find the route cause for this. Can any one help me why it is not pulling Business area for Balance sheet accounts when doing MM cycle.
what should i do if system has to pull Business area for Inventory Related Balance sheet GL Accounts?
Kindly Help me..
Thanks
Sunil

Hi,
in OMJ7, assignement were there properly. Still why i am not able to pull Business area for Balance Sheet Accounts.
I Can give one Clue: For Inventory Finished Goods, system is pulling Business area and for Inventory Raw material and Inventory Semi-Finished Goods system is not pulling the Business area.
This is my problem...
Thanks
Sunil

JVA: CutBack for Balance Sheet Accounts

Hi all,
We have some business requirements where for some specific processes we need to cuback the amounts regarding Pre-Payments or depreciation amounts of non-production assets (moveable assets like cars).
The problem seems that those amounts are in Balance Sheet accounts (of course, for the depreciation amounts the P/L side can be cutbacked without issues).
So, my question is; How can we cutback the amounts posted to the Balance Sheet GL accounts since these don't require any cost object.
Br,

Hi there,
GJ49 and GJ83 will not help in this case.
you have to use substitution rule in FI and JV to default recovery indicator for balance sheet cutback
kindly note based on the billing indicator you have chosen at company code recovery indicator derivation will work, you can however overwrite using substitution
I hope this helps
Thanks & Regards
Kalpesh Chavda

Default Profit Center - Bank G/L Accounts

I am using document splitting functionality. How to default profit center for Bank G/L while using Bank Reconciliation Account?

Hi
If you are on New GL, pls use T Code FAGL3KEH
Regards
Sanil Bhandari

Default Profit center for balance sheet account

Similar Messages

Maybe you are looking for