Default Pulldown value is not getting displayed on upper form of Second step of Unifier Workflow

Hi,
I'm new to Unifier and facing one issue while using the PullDown field on Upper. If I use the Pull down field with Default option selected in DataDefination on Upper form of Workflow's first step then it works fine, whereas if I use it on upper form of workflow's second step or any other step apart from first then it doesn't displayed. Please let me know how can i get the default value on upper form of any step.
Thanks in advance.
Abhishek@

I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

Similar Messages

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

SUN ONE Ldap - Default value is not getting displayed

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
Can any one help me in this for this issue.
Regards,
K. Senthil Kumar

I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

Values are not getting displayed in screen

Hi Experts,
I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
BDC and LSMW is not working for this t-code.
Please help me out.
Thanks and Regards,
LOGU

Hi,
i think you have not released the objects to repository. test and try again..
thanks
karthik

Data is not getting displayed in my form

hi,
i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
but it is not getting displayed................

Hi!
on the application toolbar on the top a icon is there for Field list on/off.
click on it.
below left hand side field names will be displayed.
now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
Regards.

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Measurement value is not getting displayed

i wrote the following code for my bdc.i want to check whether my flat file data got uploaded into my internal table.all field values are getting displayed in the output
except measurement(field-meins).plz help
report Z_PP_BDC1
       no standard page heading line-size 255.
*REQUEST NO.:DEVK903710
*& Table Declaration
TABLES : IBIPPARMS,RC29P.
*& Types
TYPES : BEGIN OF TY_ITAB,
        MATNR TYPE MATNR, "MATERIAL NO
        WERKS TYPE WERKS, "PLANT
        STLAN TYPE STLAN, "BOM USAGE
        DATUV TYPE DATUV, "VALID DATE
        BMENG TYPE BDC_FVAL, "BASE QUANTITY
        IDNRK TYPE IDNRK, "COMPONENT
        MENGE TYPE BDC_FVAL, "QUANTITY
        MEINS TYPE MEINS, "UNIT
        POSTP TYPE POSTP, "ITEM CATEGORY
        END OF TY_ITAB.
TYPES : BEGIN OF TY_ITAB1,
        SYTABIX TYPE SY-TABIX,
        MATNR TYPE MATNR, "MATERIAL NO
        WERKS TYPE WERKS, "PLANT
        STLAN TYPE STLAN, "BOM USAGE
        DATUV TYPE DATUV, "VALID DATE
        BMENG TYPE BDC_FVAL, "BASE QUANTITY
        IDNRK TYPE IDNRK, "COMPONENT
        MENGE TYPE BDC_FVAL, "QUANTITY
        MEINS TYPE MEINS, "UNIT
        POSTP TYPE POSTP, "ITEM CATEGORY
        MSEG TYPE CHAR128,
        END OF TY_ITAB1.
*&        Internal Tables Declaration
DATA : IT_ITAB TYPE TABLE OF TY_ITAB WITH HEADER LINE,
       IT_BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE,
      IT_BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE,
        IT1_ITAB TYPE TABLE OF TY_ITAB1 WITH HEADER LINE,
       IT_ERROR TYPE TABLE OF TY_ITAB1 WITH HEADER LINE.
*& DATA Declaration
DATA : P_FILE1 TYPE STRING ,"FILE NAME
       V_LINES TYPE I,
       FNAM(20) TYPE C,
       V_MSG TYPE CHAR_132,
       V_SUC_CNT TYPE INT2,
       TABIX TYPE I,
       IDX TYPE C.
*& SELECTION-SCREEN DECLARATION
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE LOCALFILE OBLIGATORY."FILE NAME
SELECTION-SCREEN END OF BLOCK B1 .
AT-SELECTION-SCREEN DECALRATION                                     *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
clear : P_FILE.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_FILE.
IF P_FILE IS NOT INITIAL.
VALIDATE FILE TYPE
PERFORM SUB_VALIDATE_txt_TYPE.
ENDIF.
START-OF-SELECTION
start-of-selection.
perform upload.
perform bdc.
*&      Form upload
      text
--> p1        text
<-- p2        text
*FORM upload .
clear : P_FILE1.
P_FILE1 = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = P_FILE1
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = IT_ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
endif.
*LOOP AT IT_ITAB.
*WRITE : / IT_ITAB-MATNR,
          IT_ITAB-WERKS,
          IT_ITAB-STLAN,
          IT_ITAB-DATUV,
         IT_ITAB-BMENG,
          IT_ITAB-IDNRK,
           IT_ITAB-MENGE,
          IT_ITAB-MEINS,
          IT_ITAB-POSTP.
*ENDLOOP.

Hello,
I have not understood the problem....Is this regarding the conversion exit... you can use function modules:
CONVERSION_EXIT_CUNIT_OUTPUT to display the UoM in the appropriate logon language if you have data directly from SAP database.
Best Regards, Murugesh AS

IT0185 Field value is not getting displayed on the Payslip

Hi Friends,
I have the similar issue of this post as Unable to View the IT0185 Subtype National Ins# (ICNUM) in Payslip.
Little confused with PE51_CheckTab entries and other stuff.
Could anybody please suggest as to how to resolve this?
thanks in advance.

I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

In eRecruitment - Application wizard F4 Values are not getting displayed.

Hi,
I have created a seperate process template for MBA candidates (external) as per client requirement and in the Vacancy req.when the process template is selected the application wizard is getting displayed ( which has been defined according to new requirement). But in the Application wizard for e.g.:
In Education Questionnaire for MBA candidates: It is not displaying Start date/End date /Country/Region/City ( F4Value to select).It only displays:
Start Date*
End date*
Country*
Region*
City*
The same is getting displayed in Work Exeprience ( I am unable to get the F4 entries - where the candidate can select from the entries displayed)
Is there any role needs to be changed or any other configuration missed by me to get those F4 entries?
Regards,
Selva

Hi,
I have solved this issue.
Selva

All Records are not getting displayed in adobe form from table

Hi All,
I Want to display records from table to Adobe Form Table .
But While Displaying only some of the records are getting displayed How can i display all the records in next pages of adobe form.
Its Urgent PLZ Reploy soon.
Thanks & Regards
Kiran

dear friend,
please check the adobe format, must be match to
the data base format.
pls go to the setting and adjust the data base table.
if nothing is going click the radio button
html format.
that will work.
rewards are expecting.
vivek

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Fields not getting displayed in Sapscript

Hi Guyz,
I have a customized Sapscript form ZPV_INVOICE and its print program RVADIN01. This form outputs the Sales Invoice. When the print preview is triggered, Material number (MATNR) is not getting displayed on the form. However, when the form is debugged, MATNR values are properly fetched and showed (while debugging only, not in output).
Can somebody please let me know the reason, why the MATNR is not getting displayed on the output, even though it is showing values while debugging.
Thanks in advance !

Hi ,
Then check matnr field which is display is same what you are checking in debugging .
COnfirm the field and check whether data stays till end of module .
regards
Deepak.

Statistical condition types not getting displayed in invoice

We have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
Thanks & regards
Puneet Agrawal

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji

Quantity field not getting displayed

Hi,
I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
Please suggest what can be the possible cause for this.
Regards
Sidharth
Can you please

Hi,
As far as I understand you display output parameters of BAPI, so check to following things:
1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
Hope it helps.
Victor.

Payslip(HR Forms) is not getting displayed

Experts,
We are using HR forms for pay slip, i am not able to display/print form for one of the employee. How to solve it/
Pls advice.
Also if we deleted any wage types which has paid in the past run, system is doing retro and getting stored in RTs. But it is not getting displayed in the form.
My ABAPer is using standard function for picking the retro values, since the wage type is completely deleted (bec of ZERO value), it is not getting showed in slip.
Pls advice

Medi reimb allowance has been paid to an employee in apr 11 and then may 11 client realised, he is not eligible for that. so they need to recovery it fully. it was a master data issue while go live time in april.
since it is null value, we had to delete it completely, so the system performs retro and getting paid. But it is not getting displayed in pay slip HR Forms.
ABAPer who developed the pay slip is saying, since we deleted the component it is not getting displayed by standard function. other scenarios like change value of wts, perfectly showing the retro and actual payments.

Default Pulldown value is not getting displayed on upper form of Second step of Unifier Workflow

Similar Messages

Maybe you are looking for