Default puzzle screen missing
A pop up screen showed on my Droid Charge today that said I needed
to update. I chose to update. Now I cannot set my phone back to the default screen
lock puzzle piece. It does not show up under the display settings. Any suggestions?
The new unlock is lame and in fact seems to have more problems answering my calls than the puzzle did. Not to mention it was an overall theme to the phone and looked good. Now it's just a lame padlock in a circle. It's just plain ugly. I'm very unhappy with the new change and something better looking needs to show up fast. Taking away features isn't a very good business model, now is it?
Similar Messages
-
Selecting custom attributes from the default helpdesk screen?
Can i select and see custom attributes from the default helpdesk screen? I dont want to have to click through to the details tab as things can and have been missed. See picture attached.
This topic first appeared in the Spiceworks CommunityI have worked out the issue. I was attempting to access attributes from the BOR Object "WorkItem" as opposed to elements in the workflow container. When I created a custom container element called "ReferenceID" (as the element name) and used this in my XML it worked successfully.
I hope this helps someone else in the future. -
How to hide some fields in default selection screen in hr abap
Hi experts,
I have created default selection screen,in that in the Period option I wants display only 'Today'.
And in the selection criteria i wants to display personnel number,companycode,personnelsubarea,employee status and instead of payroll area i wants to display 'Org unit'.please tell me step by step procedure,that could be greate helpfull.
Thanks in advance,
mohanuse this logic to display only today in the period option
**Local constants
CONSTANTS:
c_0 VALUE '0' ,
c_089 TYPE char3 VALUE '089',
c_091 TYPE char3 VALUE '091',
c_095 TYPE char3 VALUE '095',
c_097 TYPE char3 VALUE '097'.
At Selection Screen
at selection-screen output.
LOOP AT screen.
IF
screen-group4 = c_089 OR
screen-group4 = c_091 OR
screen-group4 = c_095 OR
screen-group4 = c_097 .
screen-active = c_0.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
How do I change the default iPhone screen capture format to .jpg?
I have an iPhone 5 (but I'm sure users with other models would like to do this as well).
My online searches have not found an answer -- I did find a discussion thread that was essentially, "Why would you want to do that?" Those posts are not welcome! Not looking for a work-around, an intermediate step, or the need to change the file format on a computer, etc. Just want to hit the two buttons and have the resulting capture be a JPEG file.
Not interested in jailbreaking or using apps that require jailbreak -- Want to do this with a new phone.
Thank you in advance for any help!!
--timYou can't.
-
How to change the text in default selection screen
Hi,
I have created the default selection screen(using PNP Logical database) ,In that I wants to display 'Data Selection Period' instead of 'Period'.
Please send me the related code.
Thanks in advace
mohanHR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data·
The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
regards
vinod -
Hiding some fields in default selection screen in hr abap created by pernr
Hi experts,
I have created default selection screen,in that in the Period option I wants display only 'Today'.
And in the selection criteria i wants to display personnel number,companycode,personnelsubarea,employee status and instead of payroll area i wants to display 'Org unit'.please tell me step by step procedure,that could be greate helpfull.
Thanks in advance,
mohanhi mohan,
try this
**Local constants
CONSTANTS:
c_0 VALUE '0' ,
c_089 TYPE char3 VALUE '089',
c_091 TYPE char3 VALUE '091',
c_095 TYPE char3 VALUE '095',
c_097 TYPE char3 VALUE '097'.
At Selection Screen
at selection-screen output.
LOOP AT screen.
IF
screen-group4 = c_089 OR
screen-group4 = c_091 OR
screen-group4 = c_095 OR
screen-group4 = c_097 .
screen-active = c_0.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
Input box on default selection screen
Hi,
how to create an input box on the default selection screen which will accept only 1275 characters.
Can u please help me?
Thanks in Advance,
Sreekala.Hi Sreekala,
You need to use the CL_GUI_TEXTEDIT for creating the box, also you need use the dialog program for that.
For more info on that class check this
Usage of CL_GUI_TEXTEDIT
Text box on selection screen
Hope they helps you.
Regards! -
How to get a default variant screen using LDB.(HR-ABAP)
Hello,
I have created a report using LDB PNP.Used HRBEN000 as a hr report category.
Got a default selection screen, I want to add one more field, for this I have selected the field from further
selection button, and displayed on the screen. Now i saved as a variant.
how to get this default screen using the variant in the report/program when executed?
Please help me.
Thanks&Regards,
Archana.Hi ,you camn always make your Z report category...if the field is present in further selection tab..
if not you can create your own paramerter or select option.....
but you have to handle it in your code ....as get pernr wont filter on its basis(parameter select optyin created by you)
but why loop at screen is not working?
let me know how you are doing...
have to do it in at selection-screen output -
How to Display key/text in default selection screen?
HI Gururs,
I want to display key/text in variable default selection screen in BI Analyzer in Quality.
please give me any suggestions to resolve this.
Thanks
vadlamudihi,
What i have done is in the cube level, in the dimensions i have made specific properties and set to key/text in development, so its working fine in development of the analyzer, but still its showing text only in quality analyzer.
please give me the solutions if you know any.
regards
vadlamudi -
Hiding some fields in default selection screen in hr abap
Hi Experts,
I am new to hr abap.I have created default selection screen by using LDB .in that i wants to display only the personnel number field.
could any help me how to hide further selections,sort order and search helps at top of screen.
thanks in advace,
mohanuse
at slection-screen output.
loop at screen.
if screen-name = 'PNPBUKRS'. (example)
screen-active = '0'.
endif.
modify screen.
endloop.
==========================
u can do it as group wise also.
loop at screen.
if screen-group1 = 'group name'. (could be group1,2,3,4)
screen-active = '0'.
endif.
modify screen.
endloop.
====================
Hi,
Can u tell me which LDB and report category u are using so that i will send u the code as per the req.
If the above code suits to ur req. pls reward the points.
Regards
eswar -
Can i change default splash screen in Oracle ADF mobile
hi,
can i change the default splash screen (i.e. the Oracle screen that shows up) when you open the app in mobile?
i want to use my own custom splash screen.
regards,
adi found that at,
http://docs.oracle.com/cd/E35521_01/doc.111230/e24475/deploying.htm#CHDGEJAI
thanks,
ad -
How to avoid default selection screen in HR interfaces(using pnp ldbs)
How to avoid default selection screen in HR interfaces(using pnp ldbs)
Dear Rakesh,
The report category is used to change the selection screen of programs that use the 'PNP' logical database.
See links bellow:
http://www.sapdevelopment.co.uk/hr/hr_repcat.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/229357553611d3967f00a0c9306433/frameset.htm
Report categories for selection screen in HR programming
Also visit the following blog:
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Regards,
Naveen. -
Problem with the default selection screen condition
hi guys,
I have got some problem with the default screen given by the PNP logical database, P0000 infotype automatically populated according to the condition given in default screen.
Reg,
HariharanDon know what u r trying to acheive.
1) when u have specified PNP in the logical databse field of attributes of program, the SAP wil proivde u default PNP screen and here u can also add ur paramters if u want.
2) in the program u have to declare like
INFOTYPES: 0000,0001. "Etc
for all the infotypes u want to use in the program.
3) it is the GET PERNR event which wil fil all the p0000 and p0001 (internal tables for al the infotypes declared via INFOTYPES syntax as shown above)
4) after tht get pernr, u now have data in P tables and u can use it for further reporting.
5) refer below dummy code -
REPORT ZPPL_PREVEMPLOYERS message-id rp
line-size 250
line-count 65.
*Program logic :- This Report is used to Download all the Previous
* Employer (IT0023) records of the employees
*eject
*& Tables and Infotypes *
tables: pernr.
infotypes: 0000,
0001,
0002,
0023.
*eject
*& Constants *
constants: c_1(1) type c value '1' ,
c_3(1) type c value '3' ,
c_i(1) type c value 'I' ,
c_x(1) type c value 'X' ,
c_eq(2) type c value 'EQ' ,
c_pl03 like p0001-werks value 'PL03'.
*eject
*& Selection-Screen *
parameters: p_file like rlgrap-filename default 'C:TempABC.xls',
p_test as checkbox default c_x .
*eject
*& Internal tables *
* Internal Table for Output
data: begin of t_output occurs 0 ,
pernr like pernr-pernr ,
nachn like p0002-nachn ,
vorna like p0002-vorna ,
orgeh_stext like p1000-stext ,
plans_stext like p1000-stext ,
begda like p0023-begda ,
endda like p0023-endda ,
land1 like p0023-land1 ,
arbgb like p0023-arbgb ,
ort01 like p0023-ort01 .
data: end of t_output .
*eject
*& Variables *
data: o_stext like p1000-stext,
p_stext like p1000-stext.
*eject
*& Initialization *
Initialization.
* Initialize Selection-Screen values
perform init_selction_screen.
*eject
*& AT Selection-screen *
at selection-screen .
* Check if Test run selected, download file name should be entered
if p_test is initial. "
if p_file is initial.
message e016 with 'Please enter file name'
'specifying complete path'.
endif.
endif.
*eject
*& Start-of Selection *
Start-of-selection.
get pernr.
clear t_output.
* Read Infotype 0
rp-provide-from-last p0000 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Check if employee is active
check p0000-stat2 in pnpstat2. "pernr Active
* Read Infotype 1
rp-provide-from-last p0001 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* check if employee belongs to PL03
check p0001-werks in pnpwerks. "belongs to PL03
* Check if emp belongs to Active Group
check p0001-persg in pnppersg.
* Read Infotype 2
rp-provide-from-last p0002 space pn-begda pn-endda.
check pnp-sw-found eq c_1.
* Read Org Unit Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
EXPORTING
OTYPE = 'O'
objid = p0001-orgeh
begda = p0001-begda
endda = p0001-endda
reference_date = p0001-begda
IMPORTING
object_text = o_stext
EXCEPTIONS
nothing_found = 1
wrong_objecttype = 2
missing_costcenter_data = 3
missing_object_id = 4
OTHERS = 5.
*Read Position Text.
CALL FUNCTION 'HR_READ_FOREIGN_OBJECT_TEXT'
EXPORTING
OTYPE = 'S'
objid = p0001-plans
begda = p0001-begda
endda = p0001-endda
reference_date = p0001-begda
IMPORTING
object_text = p_stext
EXCEPTIONS
nothing_found = 1
wrong_objecttype = 2
missing_costcenter_data = 3
missing_object_id = 4
OTHERS = 5.
* Gather all the required information related to the emp
move: pernr-pernr to t_output-pernr,
o_stext to t_output-orgeh_stext,
p_stext to t_output-plans_stext,
p0002-nachn to t_output-nachn,
p0002-vorna to t_output-vorna.
* Gather previous Employee details
loop at p0023.
move-corresponding p0023 to t_output.
append t_output.
endloop.
*eject
*& End-of Selection *
end-of-selection.
perform print_report.
* Downlaod the file
if not t_output[] is initial.
if p_test eq space.
perform download_file.
endif.
else.
write: 'No records selected' color col_negative.
endif.
*eject
*& Top-of-page *
Top-of-page.
* Print Header
perform print_header.
*eject
*& Form download_file
* Description :
FORM download_file .
DATA: full_file_name TYPE string,
z_akt_filesize TYPE i .
full_file_name = p_file.
* download table into file on presentation server
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = full_file_name
filetype = 'DAT'
NO_AUTH_CHECK = c_x
codepage = '1160'
IMPORTING
FILELENGTH = z_akt_filesize
CHANGING
data_tab = t_output[]
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.
IF sy-subrc NE 0.
MESSAGE e016 WITH 'Download-Error; RC:' sy-subrc.
ENDIF.
ENDFORM. " download_file
*eject
*& Form print_report
*Description:
FORM print_report .
data: i type i,
w_count type i.
sort t_output.
* Print the report
loop at t_output.
i = sy-tabix mod 2.
if i eq 0.
format color col_normal intensified on.
else.
format color col_normal intensified off.
endif.
write:/1 t_output-pernr ,
10 t_output-vorna(25) ,
35 t_output-nachn(25) ,
61 t_output-orgeh_stext ,
102 t_output-plans_stext ,
143 t_output-begda ,
154 t_output-endda ,
168 t_output-land1 ,
178 t_output-arbgb(40) ,
219 t_output-ort01 ,
249 space .
endloop.
uline.
Describe table t_output lines w_count.
Skip 2.
Write:/ 'Total No of Records Downloaded: ' color col_total,
w_count.
ENDFORM. " print_report
*eject
*& Form print_header
*Description:
FORM print_header .
skip 1.
Uline.
format Intensified on color col_heading.
write:/1 'Pers. #' ,
10 'Last Name' ,
35 'First Name' ,
61 'Org Unit' ,
102 'Position' ,
143 'Beg Date' ,
154 'End Date' ,
168 'Cntry Key' ,
178 'Prev Employer' ,
219 'City' ,
249 space .
format intensified off color off.
uline.
ENDFORM. " print_header
*eject
*& Form init_selction_screen
*Description:
FORM init_selction_screen .
refresh: pnpwerks,
pnppersg,
pnpstat2.
clear: pnpwerks,
pnppersg,
pnpstat2.
pnpwerks-sign = c_i.
pnpwerks-option = c_EQ.
pnpwerks-low = c_pl03.
append pnpwerks.
pnppersg-sign = c_i.
pnppersg-option = c_EQ.
pnppersg-low = c_1.
append pnppersg.
pnpstat2-sign = c_i.
pnpstat2-option = c_EQ.
pnpstat2-low = c_3.
append pnpstat2.
ENDFORM. " init_selction_screen -
Default the screen layout in T.code FBL1N
Can anyone help me with defaulting the screen layout for FBL1N. When I give the t.code FBL1N i should see the default layout populated.
Pls let me know the settings to be done.
Vinayhi Vinay,
each user can set for her/himself in FB00.
ec -
Default parameters are missing in the cloned EUL
we have discoverer up and running perfectly on our existing instance - SIGMA
now we have a new instance - ALPHA,
we cloned the whole EUL from old instance(SIGMA),
IN ALPHA every thing is working fine, we have all the BA,folders and all the workbooks seem to work fine, but we have a issue with the default parameters.
the default parameters are missing from the workbooks, now this has become an big issue, because we have hundreds of reports and user want need them all with the default parameters
could somebody please help me on this issue
few questions:
when cloned does the default parameters get erased??
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??
Could you please give me a best approach to bring in thoese default parameters??
any thoughts are highly appreciated
note: i can edit the worksheet and enter the default parameter and save the worksheet but we have got some hundreds of workbooksHi,
when cloned does the default parameters get erased??I would be surprised if the default parameters are erased. More likely is that they are not being used because the default value is not valid anymore or because Discoverer is trying to use the last parameter value. Check the value of the SaveLastUsedParamValue preference setting. Is this the same on Desktop, viewer and Plus?
Does the default parameters entered in the workbook get saved anywhere in the EUL_Tables??The default parameters will be save along with the workbook in the EUL5_DOCUMENTS table. The field is of type LONG RAW so you won't easily be able to see this field. You can use the workbook dump utility to check whether there are default parameters actually set up in the workbook.
Could you please give me a best approach to bring in thoese default parameters??You could try exporting and importing the workbooks into the new environment to see whether this fixes the issue.
Rod West
Maybe you are looking for
-
Entering multiple birthdays in ical
New Mac user. I'm trying to enter more than one birthday in address book and have it sync to ical. Can't figure how. Help?
-
I need total stock transfer value for a month
hi i need total stock transfer value for a month where can i see guna Edited by: sdnguna on Sep 5, 2009 12:34 PM
-
Urgent :---XI 3.0 INSTALLATION ERROR
Dear Friends, i have installed all the components of Xi 3.0. And now i m in the post installation steps. while creating RFC connection for INTERGRATION_DIRECTORY_HMI as per the documentation ...in logon/Security i selected Basic Authentication .. pop
-
how can i view all the users exisiting in the database with sql query
-
Hi, I have been using Adobe Cloud for few months and today I wanted to download the InDesign with AAM....unfortunately it does not work! When I open the AAM it just keeps loading for ages and then prompt for my adobe ID and password. Once entered aga