Default pwd

hi! I did a conversion from autonomous AP to lightweight AP (1240) using the cisco upgrade tool. After the conversion, i tried to console into the AP but the default password of Cisco and username Cisco doesn;t work. Any idea what's the default password after the conversion? I know that i can change that from the controller, but is that the only way to do it? Thanks.

Hi,
If the AP is already registered to the WLC, then the only way is to configure the same sing the WLC GUI... If its not yet registered, then password recovery using Mode button does not work on the LWAPP APs...
Lemme know if this answered ur question!!
Regards
Surendra

Similar Messages

ADS User pwd

Hi All,
I am getting an error while executing Adobe forms, ie., when i checked ADS connection its prompting me to enter user name and Pwd in SM59 Tcode.
Do we have any default pwd or any suggestions to get this resolved.
Thanks.
Hussain

Hi Sanket,
When i click on Print preview for the form it just prompting me to enter User name and Password in a window with following fields.
Resource AdobeDocumentServices/Config
User Name :
Password :
Thanks.
Hussain

Siebel CRM user's pwd

dears,
I am Rookie,now I am learning the siebel crm. in the siebel finance service model,by the administration-user screen,I can create a new user,But I can not set the user's pwd, and there is a default pwd for the user.who can tell me what's the default pwd.thanks.

The password is usually maintained by the database or some LDAP/SSO solution.
My first guess is that you have to talk with the persone that created the database for you.
Also read the Bookshelf: Siebel Installation Guide for Microsoft Windows > 7 Configuring the Siebel Database > Creating Table Owner and Administrator
Accounts

SAP* and DDIC password is not working in Cleint 000

Hi,
I have Installed ECC 6.0 IDES Server on Windows 2k3 with Oracle database. First time i was able to login to 000 client with SAP* (default pwd) and did some post installation steps. Now the password is not working.
I tried the following:
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>UPDATE SAPSR3.usr02 set uflag=0 where mandt='000' and uflag=128;
All the SAP users were Unlocked.
Then i tried delete command.
sqlplus>DELETE SAPSR3.usr02 where mandt='000' and bname='SAP*';
it says " 0 rows deleted "
Parameter login/no_automatic_user_sapstar= 0 is set.
Then Restarted the SAP server and tried logging with password pass it says user and password incorrect.

Hi,
As I have given in the earlier pls go through that link.
And also ...It is good practice to put back the automatic sapstar to 1 as this will not allow other to use same way as sap* /pass and log into the client.
The first thing is like create one more user in the 000 ,and also other super user incase if you have to use 000 with super user and have your own mechanism like have cutomised program and tcode with which you can activate 000 super user and use some thing like this...or it is only known to SAP BAsis Administrator.etc..
And also do not work on 000 for regular development or prd work make a copy of this client and start using them .
This has to be used only for Support pack other SAp related activities.
The first step after installation is to make a copy of these refrence clients.And start using them.
Secondly create the sap* usermaster in 000 and remove profiles .
And enable parameter login/no_automatic_user_sapstar to 1.
with this we are securing the super user from misuse.
Incase of emergency you need to delete the sap* user master from Oracle level then activate the prifile parameter and the loginto the 000 client using sap*/Pass.
Hope this helps.
Get back if you need more information.
Thanks.

Could not mount USB drive on Solaris 10 x86 system

Hi All,
I am having difficulty mounting a USB drive on Solaris 10 x86 system with the following different unsuccessful attempts:
# uname -a
SunOS venus 5.10 Generic_139556-08 i86pc i386 i86pc
# rmformat
Looking for devices...
     1. Volmgt Node: /vol/dev/aliases/cdrom0
        Logical Node: /dev/rdsk/c0t0d0s2
        Physical Node: /pci@0,0/pci-ide@4/ide@0/sd@0,0
        Connected Device: TEAC     DV-28E-V         1.AC
        Device Type: DVD Reader
     2. Logical Node: /dev/rdsk/c4t0d0s2
        Physical Node: /pci@0,0/pci108e,534b@2,1/storage@9/disk@0,0
        Connected Device: WD       My Book 1140     1007
        Device Type: Removable
     3. Volmgt Node: /vol/dev/aliases/rmdisk0
        Logical Node: /dev/rdsk/c4t0d0p0
        Physical Node: /pci@0,0/pci108e,534b@2,1/storage@9/disk@0,0
        Connected Device: WD       My Book 1140     1007
        Device Type: Removable
# svcs volfs
STATE STIME    FMRI
online Apr_13   svc:/system/filesystem/volfs:default# ls -lt /mnt
total 0
# mount -F pcfs /dev/dsk/c4t0d0p0:c /mnt
mount: I/O error
# mount -F pcfs /dev/rdsk/c4t0d0p0:c /mnt
mount: Block device required
# mount -F pcfs /dev/dsk/c4t0d0s2:c /mnt
mount: I/O error
# mount -F pcfs /dev/rdsk/c4t0d0s2:c /mnt
mount: Block device required
# fsck /dev/dsk/c4t0d0p0
Can't open /dev/rdsk/c4t0d0p0: I/O error
# fsck /dev/rdsk/c4t0d0p0
Can't open /dev/rdsk/c4t0d0p0: I/O error
# fsck /dev/dsk/c4t0d0s2
Can't open /dev/rdsk/c4t0d0s2: I/O error
# fsck /dev/rdsk/c4t0d0s2
Can't open /dev/rdsk/c4t0d0s2: I/O errorSecond try,
# svcadm disable volfs
# svcs volfs
STATE          STIME    FMRI
disabled       20:47:00 svc:/system/filesystem/volfs:default
# mount -F pcfs /dev/dsk/c4t0d0p0:c /mnt
mount: I/O errorLast try,
# mkdir /rmdisk
mkdir: Failed to make directory "/rmdisk"; File exists
# ls -lt /rmdisk
total 4
lrwxrwxrwx   1 root     nobody        16 Oct 1 2009 rmdisk0 -> ./unnamed_rmdik
drwxr-xr-x   2 root     nobody       512 Sep 30 2009 unnamed_rmdisk
# cd /rmdisk
# ls -lt
total 4
lrwxrwxrwx   1 root     nobody        16 Oct 1 2009 rmdisk0 -> ./unnamed_rmdik
drwxr-xr-x   2 root     nobody       512 Sep 30 2009 unnamed_rmdisk
# ls -lt unnamed_rmdisk
total 0
# ls -lt rmdisk0
lrwxrwxrwx   1 root     nobody        16 Oct 1 2009 rmdisk0 -> ./unnamed_rmdik
# df -h
Filesystem             size   used avail capacity Mounted on
/dev/dsk/c1t0d0s0      5.1G   4.0G   1.1G    78%    /
/devices                 0K     0K     0K     0%    /devices
ctfs                     0K     0K     0K     0%    /system/contract
proc                     0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
swap                   5.9G   984K   5.9G     1%    /etc/svc/volatile
objfs                    0K     0K     0K     0%    /system/object
sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap2.so.1
                       5.1G   4.0G   1.1G    78%    /lib/libc.so.1
fd                       0K     0K     0K     0%    /dev/fd
swap                   5.9G   148K   5.9G     1%    /tmp
swap                   5.9G    32K   5.9G     1%    /var/run
/dev/dsk/c1t0d0s7      129G   1.7G   126G     2%    /export/home
# /etc/init.d/volmgt stop
# svcs volfs
STATE          STIME    FMRI
disabled       21:02:31 svc:/system/filesystem/volfs:default
# pwd
/rmdisk
# cd /
# ls -lt /rmdisk
total 4
lrwxrwxrwx   1 root     nobody        16 Oct 1 2009 rmdisk0 -> ./unnamed_rmdik
drwxr-xr-x   2 root     nobody       512 Sep 30 2009 unnamed_rmdisk
# /etc/init.d/volmgt st
# svcs volfs
STATE          STIME    FMRI
disabled       21:02:31 svc:/system/filesystem/volfs:default
# /etc/init.d/volmgt start
volume management starting.
# svcs volfs
STATE          STIME    FMRI
online         21:04:44 svc:/system/filesystem/volfs:default
# svcs volfs
# mount | grep rmdisk
# pwd
# ls -lt /rmdisk
total 4
lrwxrwxrwx   1 root     nobody        16 Oct 1 2009 rmdisk0 -> ./unnamed_rmdik
drwxr-xr-x   2 root     nobody       512 Sep 30 2009 unnamed_rmdisk
# ls -lt /rmdisk/unnamed_rmdisk
total 0
# iostat -En
c0t0d0           Soft Errors: 3 Hard Errors: 0 Transport Errors: 0
Vendor: TEAC     Product: DV-28E-V         Revision: 1.AC Serial No:
Size: 0.00GB <0 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 3 Predictive Failure Analysis: 0
c1t0d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HITACHI Product: HUS1514SBSUN146G Revision: SA04 Serial No: 0921B2Y3PC
Size: 146.81GB <146810535936 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c1t1d0           Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: HITACHI Product: HUS1514SBSUN146G Revision: SA04 Serial No: 0921B2Z5NC
Size: 146.81GB <146810535936 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c4t0d0           Soft Errors: 21 Hard Errors: 0 Transport Errors: 0
Vendor: WD       Product: My Book 1140     Revision: 1007 Serial No:
Size: 2000.37GB <2000365289472 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 21 Predictive Failure Analysis: 0
#This is a working production system with 2 146.81GB mirrored hard disks. There is no disk error for either local or external 2TB Western Digital USB disks that works on Windows 7 or XP.
Any idea on what else to look for?
Thanks in advance,
Jack
Edited by: 797805 on 6/06/2012 04:48

Hi All,
Looks like it was a driver / incompatibility / unsupported issue since 2 other much smaller USB keys (Lexar USB Flash Drive – 32GB, SanDisk Cruzer Colors – 4GB) were successfully mounted automatically by volfs service as follows:
# df -h
Filesystem             size   used avail capacity Mounted on
/dev/dsk/c1t0d0s0      5.1G   4.0G   1.1G    78%    /
/dev/dsk/c1t0d0s7      129G   1.7G   126G     2%    /export/home
/vol/dev/dsk/c3t0d0/unnamed_rmdisk#1:c   3.7G   2.4G   1.3G    65%    /rmdisk/unnamed_rmdisk#1
/vol/dev/dsk/c2t0d0/unnamed_rmdisk:c    29G    96K    29G     1%    /rmdisk/unnamed_rmdiskIt also appears that the Device status of Not Ready from “iostat –En” below may not be correct either since both smaller drives are working fine:
# iostat -En
c4t0d0           Soft Errors: 23 Hard Errors: 0 Transport Errors: 0
Vendor: WD       Product: My Book 1140     Revision: 1007 Serial No:
Size: 2000.37GB <2000365289472 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 23 Predictive Failure Analysis: 0
c2t0d0           Soft Errors: 7 Hard Errors: 0 Transport Errors: 0
Vendor: Lexar    Product: USB Flash Drive Revision: 1100 Serial No:
Size: 31.41GB <31406948352 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
c3t0d0           Soft Errors: 60 Hard Errors: 8 Transport Errors: 0
Vendor: SanDisk Product: Cruzer Colors+   Revision: 8.02 Serial No:
Size: 4.02GB <4022337024 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 8 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0In other word, the same question remains on whether it is possible to install a driver to overcome this issue and where to such driver?
It is necessary to install additional driver that came with the disk on Windows XP platform. However,
Thanks again,
Jack

Oracle Import Error

Hi,
As part of project requirement I want to import a oracle dump file(possibly exported from oracle 9i or 10g) which was given to me from third party.
I dont have extensive knowledge on Oracle since I am purely into Microsoft Technologies.
I installed Oracle 11g std edn(trial version) and done everything right. I changed the default pwd for SYS , SYSTEM as requested by Oracle universal installer.
I was able to successfully login to localhost site with these id's. However when i try to import the .dmp file into my dB it gives me ORA-01435 user does not exist.
I tried both interactive and cmd line mode of import statement but nothing worked so far.I can see the following lines.
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
export client uses US7ASCII character set (possible charset conversion)
"import sys's object to sys"
"importing CMS's object to CMS"
IMP-00003: Oracle error 1435 encountered.
ORA-01435 user does not exist
Sorry I dont know how to paste screenshot in this question.
Please someone help me with this issue. Also after indicating this error I dont know how to go back to the cmd mode. the window does not respond after the error.
Thanks
Guhan
Edited by: gu**** on Mar 22, 2011 12:40 AM
Edited by: gu**** on Mar 22, 2011 12:51 AM

I guess that you would have installed DB Control as well. That will give you a GUI interface that you can use to CREATE USER and Grant privileges to the user.
See http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/users_secure.htm#CHDDCIGA
Else, see the command-line documentation on
CREATE USER
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_8003.htm#i2065278
and
GRANT
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_9013.htm#i2155015
It would be preferable to create tablespaces as well -- or you could assign the user the USERS tablespace when you create it.
Hemant K Chitale

OBIEE 11g services.

Hi Gurus,
I am very new to OBIEE 11g,I had installed 11.1.1.3 in my PC,I have some questions....
1)when I am trying to open default RPD it is asking Repository password..what is the default pwd?
2)what services need to up and run in services(like OBI server,OBI presentation server in 10g)?I used "start BI services"...any services also need up and run.
any one please send me some good links to do practice on Admin tool,answers,dashboards to get exposure on 11g......

Hi,
1)when I am trying to open default RPD it is asking Repository password..what is the default pwd?
Default Repository Password is : Admin123
2)what services need to up and run in services(like OBI server,OBI presentation server in 10g)?I used "start BI services"...any services also need up and run.
User : Give the weblogic user name *(you have crated the user while using RCU)*
Password : Give the Password *(you have crated the user while using RCU)*
OR
Create new user with Administrators/BIAdministrators.
Stepes:
Login to Weblogic Admin Console -> Security Realms -> myrealm -> Users and Groups [Tab] - New user -> [ex] User1 with password
-> Click on the user1 - Select the Groups Administrators/BIAdministrators
Now you can login to Repository in online mode with User1
Thanks,
Balaa...

Which user to be used in SAP IDES

Dear Freinds,
I have got installed SAP ECC6.0 in my personnel laptop. Could any one please let me know which user i can use
to do my SAP SD configuration or could you let me know which id profile i have to copy to my id in sap IDES system.
Regards
Syamala

Dear Prashant,
Thanks for letteing me know the user SAPUSER , but is there any default pwd will be there for it . Becuase when
i logged in as DDIC i coudlnt see this user - SAPUSER in the transaction SU01 . Please could let me know .
regards
syamala
Edited by: MSyamala on Sep 2, 2011 4:08 PM

Can't login Oracle BPEL console

Oracle BPEL PM shows 2 errors:
1、<2009-03-05 15:20:35,383> <ERROR> <default.collaxa.cube.engine> <DomainObserverRegistry::load> Failed to locate observer class oracle.tip.esb.configuration.deployment.bpel.BPELSvcDeploymentManager
2、<2009-03-05 14:59:24,836> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://pce-01:9700
then i can't login Oracle BPEL console with domain "default" and default pwd "bpel".
How can i solve this problem and login BPEL console ?

For the errors :
Oracle BPEL PM shows 2 errors:
1、<2009-03-05 15:20:35,383> <ERROR> <default.collaxa.cube.engine> <DomainObserverRegistry::load> Failed to locate observer class oracle.tip.esb.configuration.deployment.bpel.BPELSvcDeploymentManager
2、<2009-03-05 14:59:24,836> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://pce-01:9700
You may be having a have a DNS entry issue:
http://pce-01:9700/BPELConsole
Change on your workstation the hosts file; c\windows\system32\drivers\etc\hosts
add the entry
127.0.0.1 pce-01.<fully quaified domain name>
127.0.0.1 pce-01
Restart the SOA Suite.
Also, regarding the BPEL Console login, generally by default its welcome1, unless you have given a different password at the time of installation when running the irca.sh scripts to create orabpel/oraesb/orawsm schemas.(for SOA Adv install). However, in SOA Basic install, they get installed in olite db, so welcome1 is generally the default password.
Hope this helps!
Regards
Anirudh Pucha

How to open the rpd online

Hi
what are the settings we have to made to open the rpd into online
i tried somany times but idint get
plz give steps to open the rpd in online mode
thanks
arya

HI,
Check these links completely, opening rpd online more is more or less same as in 10g.
In 11g you need to enter rpd pwd followed by weblogic password.
http://onlineappsdba.com/index.php/2011/07/26/configure-obiee-11g-client-to-connect-to-11g-rpd-in-online-mode/
http://gerardnico.com/wiki/dat/obiee/repository
http://bidevata.wordpress.com/2011/11/23/how-to-keep-rpd-and-catalog-in-online-mode-in-obiee-11g/
Default pwd is Admin123
OBIEE 11g: Are you try to login widows 7 then refer the below link.
http://www.ascentt.com/2011/10/to-open-obiee-11g-rpd-in-online-mode/
Hope this help's
Thanks
Satya

Moving Users across different App Server versions

Hi everyone,
I need to move users and groups from a 9iAS portal to a 10gAS system which uses 10.1.2.0.2 for OID.
I was wondering if we can move users, groups into the new OID alongwith their passwords. I tried to search on forums but could not get a clear help. Has anyone done the same thing before, and would like to drop a hint or two on how to do it please?
will highly appreciate.
thanks.

Thank you very much Grant for your help. I appreciate it.
1. first method requires us to upgrade systems to 10g and then to 10.1.2.0.2. I am familiar with the first choice but have hesitation to take it.
This is a painful upgrade and we just finished upgrading, adjusting and fixing applications in our portal upgrade paths from 309 to 904, 10.1.2.0.2 and then to 10.1.4.0.0. Here for OID upgrade, we won't need the third stage but even the two takes a few days. Even backup costs 5 hours for our repository. so by the time we finish this, the list of users become old/obsolete. we need to move users for the launch phase of the upgraded portal.
2. the second method and track apparently should be fine to extract users and info. however, i haven't seen any method or procedure in the Metalink literature to keep their passwords intact. in fact, on the contrary, they suggest that the password attributes cannot be moved using ldapadd and bulkload in 10.1.2. (ref It is not possible to load orclpassword or authpassword attributes using either ldapadd or bulkload. Reference Note 401662.1 ). That leaves the choice of resetting passwords to some default pwd as one article suggests.
But our client is reluctant to email or communicate passwords to users by any method. This is the cause of this hesitation.
OID is still quite new to me and I am wondering if any other method (other than the ladapadd and bulkload) can be used to migrate users/groups without sacrificing the passwords.
thank you very much.
with kind regards,
AMN

Apex SSL from HTTP server - err 29040

Have apex environment (originally 3.1.2 now 3.2) workiing fine under http server 10.1.3. regular http port 7777.
After going thru the ssl and wallet documentation steps to apply certificates supplied to me, and scouring all the blogs, I'm still failing under https 4443 with:
SSL call to NZ function nzos_Handshake failed with error 29040
The default oracle ewallet.p12 lets me in after first complaining about the certificates. I made a new wallet, with owm, and added in the trusted certs that are suppsoed to match our internal browsers. Thats when things go wrong.
I've tried, and of course bounced opmnctl with stopall, startall after changing each one:
(1) in opmn.xml verified <ssl enabled="true"
(2) auto-logon checked in the wallet with cwallet.sso,
(3) left it off, regen'd wallet and set SSLWalletPassword to it's value,
(4) tried and verified different wallet locations and the right settings in ssl.conf. (feel confident the ssl.conf settings work cause I can cause other errors by commenting out SSLWalletPassword in ssl.conf with auto-logon=off),
(5) SSLVerifyClient set to none
(6) in opmn.xml verified <data id="start-mode" value="ssl-enabled"/>
(7) set LogLevel in httpd.conf to Debug (more output but nothing obviously usefull)
(8) set SSLLogLevel in ssl.conf to debug (more output but nothing obviously usefull)
any ideas would be much appreciated. AND especially does anyone know what the default password is for that default ewallet.p12 ?
if it told me during install I must have missed it. first born for that cause maybe I can modify it and add in my certs ?

Srini, thanks so much for helping. Sorry I didn't reply right off hand. To be honest I couldn't find doc id 473047 in metalink and then I finally got hold of our Certificate group and have been busy with them and just now got things resolved. Thanks again for replying. Really appreciate it.
If anyone else stumbles across this in the future, after having installed just the http server and not knowing much about it, the default pwd to the default wallet is welcome. (be sure and make a copy of this ewallet.p12 in conf/ssl.wlt/default before playing with it). The invalid cipher clues of the 29040 msg were not the direct problem in my case. For me it ended up being incomplete wallet information as the root cause under 10.1.3.
At first we had been just inserting trusted certificates into the wallet thinking that should match our inhouse browser images. Instead the "Warning, this is a development" msg kept showing. Finally we went thru the steps outlined in the documentation, using owm xwindows (or orapki) to create a new wallet from scratch, add a user certificate request, save the wallet, then export the user cert req to a flat file. You can then send that to your internal security group (assuming you have one) or whoever your Cert Authority is. They then send you back a new certificate that should constitute your User Certificate. You must first load in your trusted certificates (usually a Root and Issuing type trusted certs to constitute your "chain"). Then you can do a Import User Cert under owm and load in the afiorementioned fiel recvd from you security group. Also note the ON= value on your request must equal your DNS name as in server.xyz.com Also, I was being sent .key files that I could never import in. They then sent me pem files that had the key info blended in from what I understand and those worked.
I was able to get variations of the 29040 error (290xx) by trying different values within the HTTPD.conf -> ssl.conf file for the various SSL variables. In the end I've ended up with the modified settings of
SSLCipherSuite ALL
SSLProxyCipherSuite ALL
SSLVerifyClient none
SSLProtocol ALL
SSLProxyProtocol ALL
although I suspect other combinations would be fine as well.
The opmn/conf settings were set to the various values as seen in other postings and blogs but in the end did nto seem to be the issue for me. Other than modifying those <port local="6xxx" remote="6xxx" request="6xxx"/> to prevent the opmn logs from filling up fast. To do that I had to try different values that the ones found in some of the main google postings.

Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

New Installation of R12.1.1 on Linux x86-64
using zip files from e-delivery
created staging dir successfully
Ran rapidwiz
selected new Installation and Express Installation
Rapidwiz worked and installed all files but it failed at the end during validation for post install
when showed screen for Validate System Config the post-install check:
I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
details of error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
some other facts,
I cannot run sqlplus, no access to database.
it seems environemt variables are not set as echo shows empty value.
since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
tried solution 1:
I was able to run APPSVIS_localhost.env
however i canNOT connect to sqlplus
therefore no access to database:
pwd
/d01/oracle/VIS/apps/apps_st/appl
[root@localhost appl]# chmod 777 APPSVIS_localhost.env
[root@localhost appl]# ./APPSVIS_localhost.env
[oracle@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
[applmgr@localhost bin]$ ./sqlplus
./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
[applmgr@localhost bin]$
when echo oracle env variables they are all empty:
for example:
[oracle@localhost scripts]$ echo $APPL_TOP
Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
couldn't even use script v as I got error:
[oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
[oracle@localhost scripts]$ ls adst*
adstpall.sh adstrtal.sh
[oracle@localhost scripts]$ ./adstpall.sh apps/apps
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE:      adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
also in another question in forum
RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
it is asked to try this:
... commented out the following line:
#eval ohs_start -DSSL "$args"
... and replaced it with:
eval ohs_start "$args"
I have not tried this, i think my issue is with database and sql which cannot be accessed.
solution 2:
Tried workaround from Note 943443.1
but first i cannot see any file with # ls libdb*:
[root@localhost inst]# cd /usr/lib
[root@localhost lib]# ls libdb*
ls: cannot access libdb*: No such file or directory
after running the command from the Note:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
now, I can see libdb.so.2:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ls libdb*
libdb.so.2
then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
but still fails with same error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
solution 3:
tried to stop and restart services:
[oracle@localhost VIS_localhost]$ pwd
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
[oracle@localhost VIS_localhost]$ ls -ltr add*
-rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
-rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
your help is highly appreciated
thank you!

Thank you
items 1, 2 and 3 are answers to your questions,
I think you pointed to an important section as i have feeling something is
wrong with this simple default choice of localhost.localdomain.
please also see #4 as it has new information (the rapidwiz error are fixed now
but i still don't have access to anything)
1-) file: /etc/hosts
i have 2 lines in this file
[oracle@localhost etc]$ pwd
/etc
[oracle@localhost etc]$ cat hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost localhost6.localdomain6
[oracle@localhost etc]$
2-) file: /etc/sysconfig/network
i have 2 lines in this file:
[oracle@localhost sysconfig]$ pwd
/etc/sysconfig
[oracle@localhost sysconfig]$ cat network
NETWORKING=yes
HOSTNAME=localhost.localdomain
3-) per step 3- of note 761564.1 I deleted file (using root accout):
/etc/sysconfig/networking/profiles/default/network
(before deleting i made a backup network-bak, just in case):
[oracle@localhost default]$ pwd
/etc/sysconfig/networking/profiles/default
[oracle@localhost default]$ ls -ltr
total 16
-rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
-rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
-rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
-rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
[oracle@localhost default]$
4-)
I made so many changes to dir access permissions using chmod 777,
also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
the errors),
then I clicked Next button ( which of course went to the same screen I had error on )
then I clicked on Retry button and it appeared it fixed errors.
Rapidwiz confirmed all sections are ok,
no errors anymore.
(Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
then Retry button).
I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
but right now, I completed rapidwiz and all errors are fixed,
however I still don't have access to anything:
Started firefox and try to go to:
http://localhost.localdomain:8000/QA_HTML/AppsLogin
it says Unable to connect
(by the way do I have to download IE and try in there or should it work in Firefox as well ?)
I am unable to run sqlplus
I don't have anyvalue in the environment variables, they are still empty.
I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
2.2
[oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
AutoConfig completed with errors.
2.3
[oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
     Configuring IES_TOP.......COMPLETED
     Configuring CSD_TOP.......COMPLETED
     Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
still same problem, didn't change results.
Thank you for your help!

Client And User Creation in IDES

Hi ,
I created new client 100 in Client 800 and the user DDIC With the Default PWD.
After the creation of client 100 in SCC4, I Hit the TC RZ10.
Here i selected Profile As "Instance Profile".
Here Where i Should Change parameter login/no_automatic_user_sapstar == 0.
Iam unable to see this.
Please help me in this.
Regards
Khanna

Hi Khanna,
Check these..
http://help.sap.com/saphelp_nw04/helpdata/en/3e/cdacecedc411d3a6510000e835363f/frameset.htm
/thread/327681 [original link is broken]
cheers,
prashanth

BPEL Admin password is lost.

Hi,
The contractor that setup our production installation while I was away, has documented the wrong password for this account. It is not "oracle". If we have it configured to use JAZN instead of OID, what is the method to reset this password, if i can't log into the console?
I do have the unix account for oracle where the 10gAS (10.1.2.0.0) is installed and subsequently the BPEL is installed to the midtier.
Thanks!

Hi Clemens,
Found a note that indicated that renaming the auth.properties would cause a rebuild to default pwd.
I did that, restarted the mid tier, and a new one was generated.
I was then able to get to the domain. which I changed the pwd.
The bpeladmin seemed to take this pwd as when I logged in there it was the same?
Anyway, I'm ok now! Thanks for your excellent suggestion.
-James

Default pwd

Similar Messages

Maybe you are looking for