Default Query Template - Graph axis label alignment

We have BW3.1 and are using a modified Default Query Template. I am trying to set the alignment of the labels on the x-axis to diagonal (bottom-left to top-right) and although the preview shows the correct alignment, when used in conjunction with a query it defaults to vertical.
It works fine if I develop a specific web template for a query, but not for adhoc queries.
Any suggestions?

I'm guessing this happens at 30 degrees as well: Bug 10199188 : CHARTS X AXIS LABEL IS BLURRED AT 45/60 ANGLE
This bug was apparently fixed in the 11.1.1.6.6 Patch Set. Oracle Support does not have a workaround for this either.
Please award points if helpful/correct.

Similar Messages

Graph axis labels

How do I change the graph y-axis to display the values 0 - 100% of my data?
I've have some 2D arrays each containing sets of data which I'd like to plot against a % label (not % of the data!). The data within each array are all the same length (because I have re-sampled the data within the array), but no 2 arrays are the same length. The first element represents 0% and the last 100%.
Thanks

Hi Graham,
- you can change the Y-axis label to whatever you like, "Amplitude [%]" would be possible...
- you can switch off autoscaling and set your own scale range from 0 to 100
Easy as it is.
Do you want something else? Could you show a small example?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Category Axis Label Alignment

I want to know if we can modify or adjust the alignment of the Category Axis labels (for the x-axis).
My situation is as follows: I have a column chart on which I want my Category axis labels (for each column). I have put them in an angle to help reading them. They are currently "centered" wrt their respective columns. It makes it hard to associate the label to the appropriate column because the end of the label aligns with the center for the next column.
Can I either move the Category Axis Label text box? or change the alignment per se? In Excel for example, the text would be aligned such that the end of the text matches the center of its column.
Thanks

celine_l wrote:
Can I either move the Category Axis Label text box? or change the alignment per se? In Excel for example, the text would be aligned such that the end of the text matches the center of its column.
No. This appears to be a design error in Numbers, and worthy of a Feature Enhancement request.
Go to the Numbers menu, choose Provide numbers Feedback, and request that this behaviour be changes to have the ends of the rotated category labels centered on the column they label. Then cross your fingers and hope for a change in a futre version.
Regards,
Barry

Graph axis label in report generator

HI,
can someone help me with my problem ?
I need to add axis labels into graph that i made by Labview Report generator. Is there any possibility to do that ?
Thank you a lot.
Patrik :-)

This is not an Idea on how to improve LabVIEW. It is a general LabVIEW question asking for help.
You need to post it in the LabVIEW forum.

Urgent!! Default query template for all users.

Hi Guys,
How do I set the default template for queries for all users.
I saved the default template and did the setting settings>query on embed>use the default template. So the template eorked for me.
But when a different usre tried, the template did not load for him.
So is there a specific setting that can be done so that it apllies for all users.
Thanks
simmi

Hi Simmi,
There is a way that you can do this. Check this post for details as provided by Prakash:
Re: Permanent BW Excel Template
Hope this helps...

Can I align the orientation of axis labels in a graph generated with the report generation toolkit (Word)?

I was wondering how to align the axis labels, i.e. 90 degree or such when creating a graph with the report generation toolkit in word.
I can do it after the document is created through Format axis title -> alignment but is there a way out of LabVIEW?
I'd especially like to rotate the y-axis label by 90 degrees.
Thanks a lot,
Juergen

I think he means he can modify it by hand after the report has been generated... But what I want to do is generate the word graph out of labview already with the rotated axis label...
After I posted this I found out that we can do this with a macro and use it from labview, but unfortunately I don't know VB, or VBA...
Like this:

Graph Data does not align with the axis label

Hi,
The graph data does not align with the axis label when
datetimeaxis is used.
http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
(in the using parseFunction property example) when you hover on the
line graph the values do not align on the labels. Is this a bug?
Can somebody help me with this.
Thank you,
Gautam.

Hi All
Thanks for looking into it.
Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
But that change has not reflected in BW yet even after replicating datasource.
I hope i have made you all understand the situation.
Thanks for your help
Ishi

Setting the title font and axis labels in a graph created with the Report Generation Toolkit

I'm using the LabVIEW Report Generation Toolkit for Microsoft Office to generate Excel worksheets containing plots. Unfortunately, the default font size used in the plots is huge (see attached worksheet). I was able to use Excel Set Graph Font.vi to reduce the size of the axis labels, but there does not appear to be a function to do this to the title and legend. In addition, there does not appear to be a function to set the axis text labels. Before I write my own, has NI released additional functions to perform these tasks?
Thanks for your help,
Zach Lerner
Software Engineer
OnWafer Technologies, Inc.
Attachments:
Test1_-_embedded_graph's_title_and_legend_font_is_huge.xls ‏14 KB

Hello Zeidan
The graph title and legend font sizes can be changed by accessing a low level VI (Excel_Insert_Chart.vi) that is part of the excelsub.llb that is located at (C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\addons\_office). This VI is called dynamically from within the Excel Insert Graph.vi and it uses VI server technology to access the Excel exposed properties. Attached to this post is an image of the block diagram of this VI after I have modified it to set the font sizes of the title and legend to 15. The circles in the image represent what I had to add to accomplish this.
Best Regards,
Ayman Kabire
Attachments:
Excel_Insert_Chart.JPG ‏99 KB

Y Axis label color inherits Pen color and not the default Label color.

Hi,
How do I enforce my Y Axis Label to taken the default color specified in the iChart Y-Axis Label Color property instead of picking it from the Pen color selected from the legend? I have a Y-Axis Label called "Total Stock", I can very well change the Label text using method
document.TestChart.getChartObject().setYAxisLabel("Label from code");
But when I use a similar
document.TestChart.getChartObject().setYAxisLabelColor(Color);
property, I dont see the color change on the screen. But when I get the color using a getYAxisLabelColor() method , the specified input Color is set. My Label in the Y-Axis, always inherits the Pen color of the selected Legend Item, by default the first Item color on Page Load.
Settings done in the iChart:
Use Selected Pen for label : Unchecked
Y Axis Label Color: #000000
Y Axis Label : Total Stock
Show Y Axis Label: Checked.
I appreciate your help,
Ajitha

Jeremy,
I tried the method you mentioned...
document.TestChart.getChartObject().setYAxisLabelColor(document.TestChart.createColor("#000000"));
But I still dont see a change in the Label color.
Another finding is, when I try to alert the Label color on load of the page or during the creation of the applet, I see the label color on the alert is not the pen1color but the default Label color that is set in the display template. I assume that the legend's default selection, overwrites the Label color with the first pen color, but I could not get it with the getYAxisLabelColor() method, even though I see it on the screen.
Thanks!
Ajitha

Fix table header line of Query in default web template WAD 7.0

Dear all,
I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query.
My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
Many thanks in advance for your answer and help!!!
Best regards
Abdel

Hi Dion,
Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested.
Best Regards
Abdel

Does not display axis label in graph when exported to excel

I have a wierd issue.I have a report with graph with coloum chart and axis labels description on x axis.WHen i export the report to PDF everything looks OK.But when i export it to excel few axis labels disapper.Out of 12 labels only 2 apper when exported to excel.Has anyone encountered this issue.
If so is there a way to fix this.
PS: I am using BO XI 3.1 Webi.
Thank you,
Sanjeev

hi,
I have tried this out with a sample.
In WEBI preview mode and PDF, all axis labels will appear fine.
But when exported to excel, some labels will disappear.
Workaround: We have to increase the chart size in Excel till all axis labels appear clearly.
Regards,
Vamsee

How to avoid repeatition of axis labels in Graphs in WebI 4.0??

Hello All,
I am working with graphs in WebI 4.0. In category axis, the labels are being repeated thrice ,twice and so on based on the filter which I have placed according to my requirement.. I need them to be displayed only once. I have used axis label delete factor from Format chart. But then it solved only partial problem. Appreciate your help.
Regards,
Anila.

plz
try this
create a one more vertical table
and check that location-text and location-key are some .
we think it would be like this
location-text     location-key
can                          01
cbg                          02
det                           03
txc                           04
txc                           05
bec of different key and some description the axis is getting repeating.

Graph X-Axis Labels are appearing in middle for negative y-axis values

Hi,
In my Graph Output, the X-Axis Labels are appearing in the middle (where zero is appearing) if the Y-Axis values are negative.
It's a Line-Graph.
Can anyone let me know how to move the X-Axis Labels to down?
I'm using a custom Function module same as 'GFW_PRES_SHOW_MULT' wherein I'm modifying the line colors and appearance. I have to edit in this Function Module to make the X-Axis Labels appear correctly (below) even when there are negative values.
Please let me know which Parameter of the Class CL_CU_AXIS I've to use.
Here's the piece of code:
CALL METHOD graphic_proxy-ref->add_cu_bundle
            EXPORTING
              port   = if_graphic_proxy=>co_port_chart_y_prim_axis
              bundle = bundle_axis
            IMPORTING
              retval = local_retval.
Thanks & Regards,
Sowmya

Hi Sowmya,
Im Lakshmi working as an ABAP Developer. I have seen your profile in SCN. I saw your postings about OLE charts.
I have a requirement to
1) Output data from an internal table into excel, and
2) Create a chart from the data in excel
So far I have been able to export the data using OLE calls, created a chart object,.
My question:
1. How to put Data Lables
2. How to put Data Table under the Chart
3. How to rename the series names.
Below is the recorded Macro. I don't know how to convert it to ABAP.
Sub Macro1()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlColumnClustered
Application.CutCopyMode = False
ActiveChart.SetSourceData Source:=Range("B1:E4")
ActiveChart.SeriesCollection(1).Name = "=Sheet2!$A$2"
ActiveChart.SeriesCollection(2).Name = "=Sheet2!$A$3"
ActeChart.SeriesCollection(3).Name = "=Sheet2!$A$4"
ActiveChart.SetElement (msoElementDataLabelOutSideEnd)
ActiveChart.SetElement (msoElementDataTableWithLegendKeys)
End Sub
I have attached the current output and expected output.
I have searched about this in google but i could not find any solution for this.
Your help is greatly appreciated.
Thanks,
Lakshmi.

Add axis label to a graph in word report

Hi,
Is there a way to add an axis label for the graph in a word report? Thanks!
Tom
Solved!
Go to Solution.

I would guess that there is, but it would be a word automation function.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Rename cursor axis label for a XY Graph

Hello,
I am using Labview 8.2 and would like to relabel the axis of the cursor legend for a XY graph. Presently the cursor lengend contains X (for the X axis) and Y for the (Y axis). I would like to be able to rename the labels of the X and Y axis of the cursor lengend to give the user a more accurate description of the axis labels.
Regards,
Kaspar
Solved!
Go to Solution.

The changes that were made changed the names of the cursors, not the name of the X and Y axis. Think of it this way suppose that I have a X Y graph of Frequency (on the X axis) and Amplitude (on the Y axis). I create a cursor on the graph and move it around the waveform to examine the characterictics of the signal. When I move the cursor I would like the see the frequency and amplitude where the cursor is at on the signal. Right now the user has to remember (not to difficult) to figure out that the X axis is frequency and the Y axis is amplitude.
So I would like to be able to rename the header of the cursor location from X to Frequency and Y to Amplitude.
Regards,
Kaspar

Default Query Template - Graph axis label alignment

Similar Messages

Maybe you are looking for