Default Report File location for BIP

Hi Experts,
Is there a way to change the File Location on where a BIP report is generated, whether via adhoc or a scheduled method?
Any helpful inputs is highly appreciated :)
Thanks!

Hi,
Based on my tested in my environment, I went to set the Default File Location via group policy.
Word: Microsoft Word 2013/Word Options/Advanced/File Location/ and change the Default File Location
Excel: Microsoft Excel 2013/Excel Options/Save and change Default file location
Both of them works fine. As you said " However, Group Policy will set it in Excel." Does it mean that you set Word and Excel via two group policies at the same time, but it only works in Excel?
If it is, please try to re-download and change the
Word ADMX to test.
If the issue still exist, please try to use Gpresult command Or RSOP to check group policy result on client.
When troubleshooting group policy issues, we use the gpresult command to confirm whether GPOs are really applied to the client (computer/user). You can run the following command in a command prompt:
gpresult /z > c:\policy.txt
For more details about the usage of command Gpresult, please refer to the following link:
http://technet.microsoft.com/en-us/library/bb490915.aspx
When you read the output, the c:\policy.txt file in this sample, please
examine the results of the report to find the answers to these questions.
Does the report list the particular GPO as applied?
Is the setting listed in the report?
Is the GPO listed in the Denied List
More reference:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
Regards,
George Zhao
TechNet Community Support

Similar Messages

Log file location for FC 3510

Does somebody know whats the default log file location for a FC3510 connected to solaris 8 machine?
thanks.

You need to enable specific logger for the same:
http://identityandaccessmanager.blogspot.com/2011/02/setting-up-log-level-in-oim-11g.html
Loggers:
oracle.iam.request
oracle.iam.requestactions

Default Project File Location - PE7

Can anyone help please
I have been looking for a way to edit my default Project file location. Have managed to change all the Scratch disk locations to my (Local) F: Drive, but I cannot see a way to change the default location for Projects to be the same drive.
I know I can set it each time I start a project, but it seems strange with modern software to be unable to define a default.
I've searched the Registry and can't find anything there, and I cannot see anything in Edit>Preferences. Also searched the forum, but couldn't find an answer.
Thanks
Colin

Thanks for the prompt and helpful reply. Really is much appreciated.
I'm going to print off your response and use it for my next project (in a couple of days).
Looks perfectly logical way of working.
Colin

Where are Pantone color library file locations for InDesign CC?

I cannot believe how difficult it is to find this information. It should be a quick search in the regular Help system.
I'd really like to find the file locations for Illustrator CC and Photoshop CC too, because I need to update my Pantone libraries, but every place I can find to save them does not seem to be the default location, so I end up with a really long dropdown menu of strangely duplicated library names, and I have no idea how to clean it up or where the program is looking to give me that list.
As far as I can tell, the default libraries are located whereever that first set is. The lower sets must be somewhere else, but I don't know where, because I've deleted all Pantone sets but one that I could find, but I can still see them (and the other non-pantone color books) duplicated in the lower sets.
Please help! Also, Adobe, if you see this, this information should be READILY and EASILY found through the main Help menu in any Adobe product.

This was the correct answer:
Laubender Jun 2, 2014 12:18 AM (in response to Maurice Castelbuono)
@Maurizio – the standard settings, the joboption files with the brackets like [PDF/X-1a:2001] are stored inside the inDesign app for InDesign CC 9.2.1.
The path for these would be:
/Applications/Adobe InDesign CC.app/Contents/MacOS/Resources/Adobe PDF/settings/mul
or with a Japanese version of InDesign:
/Applications/Adobe InDesign CC.app/Contents/MacOS/Resources/Adobe PDF/settings/japan
If you do a right-click on the InDesign app you can show them with "Show Package Contents" options.
All other PDF joboptions that you are creating are relative to your current User Library. They are stored in:
~/Library/Application Support/Adobe/Adobe PDF/Settings
Where the tilde sign at the beginning indicates the home of the currently used user.
You can access ~/Library, if you press the alt key when accessing the "Go To" menu in the Finder. Otherwise it's invisible.
Uwe

Please can you tell me the default maximum file size for an attachment in Case Management v12 ?

Hi,
Please can you tell me the default maximum file size for an attachment in Case Management v12+? I am able to define a maximum attachment size but I am not able to see what the default is set to.
Thank you
Regards,
Anthony

Hi,
The default max attachment size is 8MB.
Regards.
Mike

Apps on computer but in a different folder. Can I merge them?I have 180 apps that iTunes can no longer "find". They appear in "my apps" and there is a file location for them. Can old purchases be restored without doing each one individually?

I have 180 apps that iTunes can no longer "find". They appear in "my apps" and there is a file location for them. Can old purchases be restored without doing each one individually?

That did the trick! Thank you.
The free trial is all I needed to migrate my iPod Touch library into my main iTunes library. For those that want to use this tool for the same needs there are some things that need to be moved manually, e.g. Apps. But you can do it within the program very easily. Also iBooks/PDFs etc. need to be moved manually. The help section will point you in the right direction.
No more switching iTunes libraries for me.

New-Cluster Report file location

Hi All,
I’m creating a cluster with new-cluster cmdlet and I need this to be a silent run.
New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
*>&1 |
Out-Null
But I can’t get around the following output: Report file location: C:\Windows\cluster\Reports\Create Cluster Wizard <servername> on 2015.04.07 At 13.32.33.mht
I have tried it with:
$WarningPreference
= "SilentlyContinue"$VerbosePreference
= "SilentlyContinue"$DebugPreference
= "SilentlyContinue"$ProgressPreference
= "SilentlyContinue"
$leeg
= New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
*>&1 |
Out-Null
$leeg
= New-Cluster
-Name $ClusterName
-Node $Node1,
$Node2,
$Node3 -NoStorage
-StaticAddress $IPAddress,$IPAddress2
-verbose:$False
-Debug:$False
-OutVariable out
-WarningAction SilentlyContinue
-WarningVariable wout
| Out-Null
But I keep getting the following output on screen:
Report file location: C:\Windows\cluster\Reports\Create Cluster Wizard <servername> on 2015.04.07 At 13.32.33.mht
Best regards,
Chris

Hi Chris,
this is due to non-conformance with PowerShell best practices by the coder of the FailoverCluster-Module developer.
New-Cluster writes directly to the host and thus can't be suppressed this way.
You may have more luck handling this odd output by running this command within a job or runspace.
Cheers,
Fred
There's no place like 127.0.0.1

HT4910 I need to find the file location for my iCal in iCloud

I need to find the file location for my iCal in iCloud for my Mac. I inadvertently changed the file location in Terminal and need to restore the proper location but do not know how to locate that information. Any help is much appreciated,

You should find "Preferences" in your Edit menu in iTunes.

MacBook Air, can I partition my Mac external drive to have an ISO image file location for Windows downloads?

Hi, in preparation for installing bootcamp and windows 7, and in the absence of a DVD drive on my MacBook Air, can I partition my Mac external drive to have an ISO image file location for Windows downloads?

The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

Is there a way to change the default Save As location for Adobe Reader XI?

Is there a way to change the default Save As location for Adobe Reader XI?

kel-drago wrote:
Can't be that difficult to arrange.
No, it's not. But someone has to request it: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Default Project File Location

I just installed on a new computer and I cannot find out what to change to
point to a specific folder as the default project file location. It is not
in Scratch Disks.
Anybody know?
Steve

I think it just comes up automatically in the last folder used. Not sure that can be changed.

To change default backup file permission for dsconf

Hi,
I was wondering if it is possible and ADVISABLE to change the default backup file permission for dsconf util. We're having two OS users, once which runs the script, and other which runs the dsconf. We're not allowed to schedule crontab from the second user profile. Hence, the user which runs the script will not be able to purge the old backup files as part of the backup process.
-rw------- 1 tty gis 32M Dec 15 22:00 usersConfig-15-12-11.ldif
Any thoughts if anyone has come across such issue.
Thanks, JPrince

So if I understand correctly, there is one user which creates the backups, and can run cron scripts. A second user runs some script on the backup, but doesn't have permissions to remove the backup once the script finishes.
Changing the permissions on the file itself is not enough, you have to have write permission on the directory which contains it as well. This doesn't sound (to me) like something you really want to do.
What I would suggest thinking about is having directory or file somewhere that both users can read/write.
When the script finishes processing, write the name of the backup into that file (or create an empty file in the directory with the same name as the backup).
Run a cron script from the first user (the one that creates the backups) which checks for names of processed files. If it finds any, it removes those backups, and the names from the file/directory.

Default File Location for Word using GPO

I have just launched Office 2013 for my users.   Those users access Word and Excel via Terminal Servers.   So, I need ways to set the defaults for these products so I don't have to touch each users login/machine.   I have been
able to use Group Policy for everything I need except in Word and the default file location.   I have tried the GPO administrative template for Office 2013 and went to Microsoft Word 2013 > Word Options > Advanced > File Locations and set
the path to N:\
Did the gpupdate /force and nothing changed.                               However, Group Policy will set
it in Excel.
So then I tried using the registry template in GPO.     Here I used HKEY_CURRENT_USER with path to
Software\Microsoft\Office\15.0\Word\Options and the value name is DefaultPath
Value data is N:\
That doesn't work either.
HOW are we suppose to set defaults to our network in Word.
I have also did the entry in GPO to "block signing into Office"                     None Allowed
We don't and won't be using SkyDrive in our type of business

Hi,
Based on my tested in my environment, I went to set the Default File Location via group policy.
Word: Microsoft Word 2013/Word Options/Advanced/File Location/ and change the Default File Location
Excel: Microsoft Excel 2013/Excel Options/Save and change Default file location
Both of them works fine. As you said " However, Group Policy will set it in Excel." Does it mean that you set Word and Excel via two group policies at the same time, but it only works in Excel?
If it is, please try to re-download and change the
Word ADMX to test.
If the issue still exist, please try to use Gpresult command Or RSOP to check group policy result on client.
When troubleshooting group policy issues, we use the gpresult command to confirm whether GPOs are really applied to the client (computer/user). You can run the following command in a command prompt:
gpresult /z > c:\policy.txt
For more details about the usage of command Gpresult, please refer to the following link:
http://technet.microsoft.com/en-us/library/bb490915.aspx
When you read the output, the c:\policy.txt file in this sample, please
examine the results of the report to find the answers to these questions.
Does the report list the particular GPO as applied?
Is the setting listed in the report?
Is the GPO listed in the Denied List
More reference:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
Regards,
George Zhao
TechNet Community Support

Default save file location ignored for Outlook attachments

Whenever I open an office attachment in Outlook, then edit and try to save, it always goes to "Libraries/Documents". I then have to do numerous clicks to get to my default location for every file.
Is there somewhere to set the default for this. The "default file location" in Excel or Word are ignored.
Thanks, Joe

Try this:
Open the Registry Editor (regedit) and browse to the following registry key:
HKEY_CURRENT USER\Software\Microsoft\Office\15.0\Outlook\Options
Create a new String value called "DefaultPath" in the right pane, modify the entry to the locate as you want.
Another thread with the same topic for your reference:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/default-save-location-does-it-have-to-be-a-library/11ee9557-78ba-4236-8200-ee4961f881ee
Thanks.
Tony Chen
TechNet Community Support

How do I change default file location for NON-MUSIC files?

My Laptop's "My Document" folder is on network per the corporate configuration. When I am not on VPN, I can not start iTunes since it looks for files on network.
Also my "My Documents\My Music\iTunes" folder on the network is growing quite large since all *.ipa files are stored there.
Is there any way to point all file locations to my C drive?
Thx

App store files will get put in a subfolder named \Mobile Applications.
The preference files will stay on the C: drive under your user profile.
C:\Documents and Settings\ username \Application Data\Apple Computer\iTunes

Default Report File location for BIP

Similar Messages

Maybe you are looking for