Default role missing options in new gallery

I am new to JDeveloper 11g. When accessing the software, I am selecting the "Default role" from the intial roles dialog. When selecting File / New, I get the following options only:
General
- Applications
- Connections
- Deployment Descriptors
- Projects
Business Tier
- Web Services
Client Tier
- Extension Development
Database Tier
- Offline Database Objects
All Items
The help for New Gallery suggests I should be seeing much more than this (UML, XML, TopLink etc.) when logged in under the default role. Can anyone suggest what might be wrong? Is there a config file I can look at or update?
I am running JDeveloper 11g on Windows XP SP3. The version of 11g is:
Oracle JDeveloper 11g 11.1.1.0.1
Studio Edition Version 11.1.1.0.1
Build JDEVADF_MAIN.BOXER_GENERIC_081203.1854.5188
Copyright © 1997, 2008 Oracle. All Rights Reserved.
IDE Version: 11.1.1.0.31.51.88
Product ID: oracle.jdeveloper
Product Version: 11.1.1.0.31.51.88
Any help gratefully received.

User,
All of the things you mention require a project; so, first create an application and a project; then, ensure the Technology Scope for the project matches what you want to do (right-click, properties, technology scope). Then, you should see all of the things you mention.
John

Similar Messages

Setting default "Initial View" options for new PDFs

I usually want most of the PDFs I create to open with the pages panel displayed and “fit to window”. Currently I open every PDF and change that in the document properties under “Initial View”, save and close.
There must be a better way.
Is it possible to set this as the default for all newly created PDFs as part of the job options definition?
I've searched in the different settings panes, but to no avail.
Any hints appreciated.

The Initial View (IV) settings are not part of the options when creating a new PDF, either in Acrobat or Distiller.
There are several options to apply IV depending on the version of Acrobat you're using. You can create an Action in Acrobat X which applies IV to any open file as per your requirements, and optionally saves it as well. In Acrobat 9 or earlier you can do a similar thing with a batch process sequence.
If you need to attach IV as part of the creation process then you can use an "epilogue.ps" script to add commands which Distiller will append to the PDF, and link that PS file to one of Distiller's presets.
Lori Kassuba has a blog post about this method.

Default Role configuration in CUP

Hi Experts,
We are on GRC 5.3 SP9 and I am trying to assign default roles based on the request type
I want default roles to be assigned only for certain request type
these are the parameters I have configured
Consider default roles: YES
Request Type: NEW Hire
Default roles level: request
user attributes: Company
So I am forced to choose default role user Attribute Company.
I was expecting that whenever a request is created for a new hire I wanted such and such role to be assigned by default!
but now whenever a company( for which i mapped the default roles) is selected its putting default roles in all the request types
I would expect its only puts default roles for my request type NEW HIRE
for the respective company !
Any thought? I am missing something?
Regards
MK

Hello Alpesh,
SAP has come back saying that the application is designed that way always works with the comibation of user attributes
to me its clearly user attributes are taking over the request type ( clearly ingorning ) i dont see a point why they have field in default role configuration for request type ( Request type might as well be simply CUP)
they have asked me try with user attribute as system instead of company , looks like it works !
I will give you more info
Best Regards
MK

Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar

Missing options of "Enter Private Browsing" "Open new tab" and "Open new window" when right click (right context menu) firefox icon on taskbar.
i already tired complete uninstall and reinstall, but the options are still missing.
print scr: http://www.freeimagehosting.net/9znkp
Thank You in advance for help. Best regards

Hello,
''jstavene wrote:''
can find nothing under the tools menu for private browsing?
Then it's not the same issue.
If Firefox is set to '''Never remember history''', then you're in “permanent private browsing” mode, in which case the menu item ''Stop Private Browsing'' will be grayed out. Perhaps that's the case, and you don't find the menu item easy to see?
* [[Settings for privacy, browsing history and do-not-track]]
If that's not the case, then menu items can be hidden using the userChrome.css file. Check if it exists, and if it's there, rename it, then restart Firefox.
* http://kb.mozillazine.org/UserChrome.css
In Firefox Nightly (what will become Firefox 20), per-window private browsing has been added, so the menu item under the Tools menu is gone. It's been replaced by New Private Window under the File menu. I don't suppose it's very likely that you're using such a cutting-edge test version of Firefox though.
If that doesn't solve the problem, since it's a different issue, it would be best if you would ask a new question.
* https://support.mozilla.org/questions/new

Item list in New Gallery missing choices

I am using jDeveloper 10.1.3.3 and when I go to New Project, and select Web Tier in New Gallery, I only see a limited number of option. How do I get all of them? I want Servlet and JSR 168 Portlet. Did I turn something off to make these go away?

What is the JDeveloper edition?
The JDeveloper Java edition does not have the J2EE options.
Use the Studio or J2EE edition.

Assigning Default Role to New Users created

Hi
How can we assign a default Role to any new User created.
This Role should automatically get assigned whenever a new User is created.
Regards

Hello,
for ABAP Stack users you can just create a reference user with the according roles and copy new users from it.
Regards
Christian

Default Every User Roles missing

Hi,
We installed the latest version on EP 6.0. After installation, when we looked into the available default roles in the portal, the dafault Every User Roles - " Role: Every User Core (eu_core_role)" and "Role: Control Center User (cc_user)" are missing in the list. Only the "Role: Standard User (eu_role)" is available. Could you please let us now what could be the problem?
Thanks.
Bhagya.

hi,
i could find eu_role and cc_user roles, no eu_core_role is found in my portal content folder. anyhow i assigned eu_role to the user, and when he logs in he could only see the home workset, "portal personalization " is not visible.
i checked the hierarchy of the role in the role editor, but it shows "portal personlization" workset in the hierarchy
could some one lemme know y is it like that..should i enable "portal personalization" workset by my own.
version : ep6.0 sp12
thankyou

I recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

i recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

Your earlier phone must have been originally intended for sale in another country and must have been purchased from somewhere other than an authorized Apple retailer. Phones that are intended to be sold in the UAE have FaceTime permanently disabled. The option is not there and cannot be made to work.

No "All Features" tab in "New Gallery"?

Following the instructions in the Setting up the ADF Mobile Environment chapter 3, section 3.3 ("Setting Up JDeveloper"), step 8 references an All Features tab. There is no such tab. It appears I may need this tab to see the Client Tier. All I see is an Available Items tab with no Client Tier selection under Categories.
I just installed a fresh copy of JDeveloper Studio Edition Version 11.1.2.4.0 and added the ADF Mobile extension as indicated in the instructions.
I am not sure how to proceed given the missing tab.

Thank you. It shouldn't be required as elevated privileges generally aren't needed to modify stuff under arbitrary directories off the C drive root. But I'll try it anyway.
When running as administrator and checking for updates, ADF Mobile no longer shows up. Is it because I already installed it?
OK, let's uninstall. JDeveloper 11g appears to have no extension uninstall feature, so I closed it and deleted the contents of C:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.adf.mobile.
Re-opened JDeveloper as an administrator, Help > Check for Updates, Next, Next (Official Oracle Extensions and Updates was already checked), ugh, still don't see ADF Mobile.
OK, uninstall JDeveloper. Delete c:\oracle as it still had 227 MB and 1351 files. Reinstall JDeveloper 11g from jdevstudio11124install.exe, accepting all defaults.
Run JDeveloper again as administrator (right-click, Run as administrator). On Select Role screen, accepted default of Studio Developer (All Features). Help, Check for Updates, Next, Next (Official Oracle Extensions and Updates already selected), checked ADF Mobile 11.1.2.4.39.64.44, Next, I Agree, Next. It downloads ADF Mobile. Finish.
Hit No on Confirm Exit dialog. Close JDeveloper. Start it again as administrator. On Select Role screen, accepted default of Studio Developer (All Features). File, New. Again, New Gallery page has no tab besides Available Items, and there is no Client Tier entry under Categories.

ARQ: Default Role Provisioning Problem in Access Request???

Hi,
This Business Scenario is very common to have default role(s) assigned to a User at the back end system. So I have the same requirement. In achieving this, I followed below thread here:
MSMP Issue - GRC 10
I have also followed the note#1616092 for configuring the Default Roles.
I have performed below activities:
1. Param#2009 = YES
2. Param#2010 = 001
3. Param#2011 = REQUEST
4. Param#2013 = SYSTEM
5. Param#2038 = YES
6. Imported a test role and NO ROLE OWNER is maintained.
7.In NWBC->-AM->RM, I maintained a test role as a default.
Now when I raise a request, application is successfully adding the default role to the request. However, the problem I am facing is that, one Manager approves the request, it is getting failed.
The Audit Log says that, the STAGE is "Completed" but I could also see "No Agent Found, Cancelling path XYZ (in stage no. 002- GRAC_ROLEOWNER)
May I know what I am missing here? Why I am getting error and how can I resolve it?
Please advise.
Regards,
Faisal

Hi Faisal,
sorry for late resposne I was away traveling.
default roles are being added by default to access request
Yes, these roles are added to the access request.
FN: OK
and this roles are following your normal paths which I guess assumes manager and role owner.
How such roles (not having role owner) will follow the normal path Manager->Role Owner if we are enabling routing (Rule ID: GRAC_MSMP_ROUTE_NO_ROLEOWNER) at manager stage level? Can you please help me understand this?
FN: OK If you enable routing it will go to routing path. I have understood your post as you put in question the behavior of default roles and my point was - they act exacly the same like regular roles.
- request is going to detour path
Does it answer my question?
FN: My point was default roles like all other will go to detur path (assuming you setup it globaly)
Deafault roles can have separate path (in my case) where only supervisor is approving it.
Instead of "GRAC_MSMP_ROUTE_NO_ROLEOWNER" I believe we can have our own rule to have a separate path for such default roles based upon business requirement. Correct me, if required.
FN; correct
It was design in way that initiator rule based on role crtivality is sending this rule to separate path without role owner.
Again, I believe you have enabled your custom rule here to achieve your business requirement instead standard rule id.
correct
If you do not have separate path - this role like any other will follow standard path you have.
Here, I had used a stage called "ZNO_STAGE_PATH" for routing the system line item, which does not have any owner. I used the same path ID for "GRAC_MSMP_ROUTE_NO_ROLEOWNER"Rule ID and it is working fine as of now.
FN: good
My question is that, do you think if I don't use "ZNO_STAGE_PATH" as Path ID for "GRAC_MSMP_ROUTE_NO_ROLEOWNER" Rule ID, should it follow the standard Manager->Role Owner path and these default roles get approved and assigned automatically?
FN: You should use the path ZNO_STAGE_PATH as path ID for routing rule.
If the role does not have role owner it will not allow you the even get to Role Onwer stage - request will be detured.
My point from the begining was - instead of using the routing rule - in our case we used separate path for default roles without role owner:) only consisted with manager stage. Again your approach is different but also will work.
Then which Path ID should I use for "GRAC_MSMP_ROUTE_NO_ROLEOWNER" Rule ID, as it is mandatory?
Should I use my current path for New/Change Account where at Manager level this was routed due to non availability of role owner?
Are you asking for default roles?
Please advise.
Regards,
Faisal

RE: Default role config in CUP

Dear Experts,
I got a problem with default role configuration. Please help me in resolving the issue.
I want to configure defaults for all request types like new account and change account as well. Also I what the option "Create if user does not exist" to YES.
This means when ever change account workflow is executed for the existing users, default roles are getting assigned redundantly. is there any way to fix this problem.
My solution is to schedule "PRGN_COMPRESS_TIMES" job so that system will delete all redundant roles. Please advise if there is any other alternative. Client is insisting to have the option "Create if user does not exist"in Auto provisioning enabled.
I appreciate your help.
Thanks,
Raj

Hi
Set the below parameters it never assign the role for change request.
it is working in our system.
CUP---->Configuration->Roles>Default Roles-->Request type = New Hire

GRC AC10 RAR :"Ignore Critical Roles/Profile" option not available in

Hello Gurus,
I have configured RAR and the reports are working as usual , but i observed that i could not see two things
1) Option to select "IGNORE CRITICAL ROLES/PROFILE" during Role/User ANALYSIS under "Reports & Analytic" tab.
I checked in SPRO>GRC>AC-->Maintain Config Settings
There is a parameter "Ignore Critical Roles/ Profiles" which i first set to "Yes" and then checked in NWBC , i was unable to see the option under "Additional Option".
Later i changed SPRO setting to "NO" , then again it did not show me .
Where can i find this option , so that if i upload say 10 roles which are assigned to firefighter ID they should not be analyzed for RAR ??
2) I also could not find any option to upload "DEFAULT roles" which need to be assigned to any "NEW USER" request coming through CUP ??
Where can we make this setting, so that the basic roles can get assigned to the user when any new user request comes in.
Will you please put some light on this area ?
Thanks in advance.
Regards,
Victor

Hi Johanna
Have you run the synchronization job subsequent to the configuration of critical roles / profiles ? If not so try running the Synchronization job and then try risk analysis.
Regards
Swarna

Error adding Default roles after transport

we are trying to transport our GP to another system.
the transport imported successfully.
but we are getting below error if we need to add the Default roles in the new portal system.
Administartion -> Assign default roles ->
Error/Message: The process template does not contain roles to which you can assign default values.
     Could not retrieve process template
Design time:
     Error/Message: 1.Cannot retrieve activity template: Development object does not exist in the database
                    2.      Cannot retrieve object:
Please suggest me if you have faced simiilar issue.

Already I have tried in both from Administartion -> Assign Default Roles -> Select the process, by selecting the process & when we click on Open, this error is populated.
Also in Design time -> select the process -> by clicking on the "Open" , I am getting this error.
Also, I have tried the option to do "Edit All" to change the version of all the objects and transport them to targeted system.
and , also implemented the SAP Note: 1321013.
But in all the above cases, I am getting the same error.
Then tried to remove the Default Roles and assigned all the roles to Initiator, then transported, still when I try to run the process and when I open the process getting the same error.
SAP Note: 1321013:
Terminate all process instances.
Unlock all objects.
Delete all process templates.
Empty trash.
Redeploy process templates.
Release objects after Import.
(http://wiki.sdn.sap.com/wiki/display/JSTSG/(GP)ICannotStartorOpenaProcess)

Default Role Config in CUP

Hello,
I would like to configure CUP to add default roles for one specific system when Request Type is Create User but for another system when Request Type is Assign Role. Is that possible?
I am using GRC 5.3 SP 16.3.
Vaner

vcrilho,
I´ll give you an option. Maybe someone figures out a different one.
You can create two new request types under configuration->request configuration->request type:
Change_account_system1
Change_account_system2
You´ll be able to configure default roles independent for each one of this request types.
Regards,
Diego.

ALTER USER USERNAME DEFAULT ROLE ALL;

Hi,
I want to know, what is the meaning of "ALTER USER CARDS DEFAULT ROLE ALL"

It's easy to understand things when you try them,
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Oracle Label Security, OLAP, Data Mining
and Real Application Testing options
SQL> grant connect to newuser identified by newuser;
Grant succeeded.
SQL> conn newuser/newuser
Connected.
SQL> select * from session_roles;
ROLE
CONNECT
SQL> conn / as sysdba
Connected.
SQL> create role new_user;
Role created.
SQL> grant select any table to new_user;
Grant succeeded.
SQL> grant new_user to newuser;
Grant succeeded.
SQL> conn newuser/newuser
Connected.
SQL> select * from session_roles;
ROLE
CONNECT
NEW_USER
SQL> conn / as sysdba
Connected.
SQL> alter user newuser default role connect;
User altered.
SQL> conn newuser/newuser
Connected.
SQL> select * from session_roles;
ROLE
CONNECT
SQL> set role new_role;
set role new_role
ERROR at line 1:
ORA-01919: role 'NEW_ROLE' does not exist
SQL> set role new_user;
Role set.
SQL> select * from scott.dept;
    DEPTNO DNAME          LOC
        10 ACCOUNTING     NEW YORK
        20 RESEARCH       DALLAS
        30 SALES          CHICAGO
        40 OPERATIONS     BOSTONHTH
Aman....

Default role missing options in new gallery

Similar Messages

Maybe you are looking for