Default "send from" address when sharing photos in Backup Assistant Plus

Hello,
Is there a way to change the default "send from" address when sharing photos in online storage from the Backup Assistant Plus app on the Bionic? I have found the setting on the VZW website for e-mail address maintenance in Backup Assistant Plus, but the address I'm using on the site did not affect the setting on the phone. This is not a huge issue, but under the current setting, the Bionic is using an address to which I no longer have access, so I'd like to update this address if it can be done.
Currently running Ice Cream Sandwich, 6.7.246.
Thank you.

Found the answer - there is a second link for settings on the media management screen which controls the default sending e-mail address.

Similar Messages

Error Code 1000 when trying to run Backup Assistant Plus.

I am getting backup failed and Error Code 1000 when trying to run Backup Assistant Plus. Have not been able to backup for several weeks.Droid Razr Maxx.

Hi ellendritz- We are dedicated to make it easier to backup your data! We have integrated Backup Assistant with the Verizon Cloud service offering you many more features and 5GB of storage free! Visit http://www.vzw.com/cloud for more details. The Verizon Cloud app is currently available for download in the Google PlayStore. Please attempt backup with the new application and keep me posted on the status as I would be happy to offer additional support if needed.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Why do I get "communication error" when selecting Contacts in Backup Assist Plus?

Have reset Backup Assistant Plus due to sync Errorcode 5 using Verizon response to others in this forum. After running Backup Assist Plus again, I find that I cannot select Contacts for backup. I get a message that says "Error - There was a communication error". I was able to select pictures and these were successfully backed up. Any suggestions?

Hello BobS3!
We absolutely want to make sure your contacts are backing up as well! I'm sorry you're running in to this concern. Let's figure this out together. Just to clarify, you mentioned you reset Backup Assistant Plus. Was this by following these steps: http://vz.to/14Iv5eS and clearing the data for the Sync Service and Backup Assistant apps?
Additionally, here is the easiest way to backup your contacts: http://vz.to/17zlkh3
Let me know the results!
Thanks!
MelissaM_VZW
Please follow us on Twitter @VZWSupport

Is it viewable by anyone photos when sharing photo stream by ticking 'Public website'

Hi Guys,
2 questions:
1. Where is the web-address when sharing photo on on photo stream in iPhoto (Mac version) by ticking 'public website'? how can i find it for reference?
2. is it viewable by anyone not invited?
Thanks.
Pedro

When you create and publish a Public Photo Stream and then open it's Info tray in iPhoto the URL to the website will be show in the tray:
It will be viewable by anyone who gets a hold of the URL. You can send the URL to selected recipients but if they share it others can view the photos.
To view a private Photo Stream the recipient must have an Apple ID and an iCloud account. They will receive a notification like this:
Only those who have been invited can view a private Photo Stream.
OT

Entering Message when Sharing Photos via E-mail

Just loaded PS Elements v11. Have used PS Elements v7-9 previously. When sharing photos using e-mail (comcast.net) as attachments and photo mail, I was able to enter a message to recipient before sending the e-mail. In Elements 11, in area where text can be entered, I cannot get a cursor to type a message. The phrase, Here are photos....., is embedded there and can't even erase. Area is frozen to using a cursor. Sending the e-mail is no problem. Would appreciate help so I can start sharing photos. Thank you.

I think there is some kind of scripting bug in PSE11 when sharing photos by email but there is a work around.
Select your thumbnails and click Share >> Photomail
Then choose your contact and continue.
After choosing stationery, click next step.
In the next dialog (customize & layout) click on the text dropdown and change from Arial to Times New Roman (may not be essential but it works for me).
Then click next.
When the email appears you should now be able to select (click until a bounding box appears around the text like that of a picture) and delete all the Adobe automatic text, leaving only the photo(s). Delete the web link and text below the photo using the backspace key. You should now be able to add your own text.
Then hit send.
I can’t guarantee it will work on your system but it works on windows Vista and it’s worth trying.

O2010 default send from w/out changing primary adress w/exchange ?

Hello,
i have some users that need to send mail as coming from one of the generic distribution groups that are setup(f.e.: John needs to send mail as "customers@company", i have the sendas permits setup and it i expose the dropdown the user can select
how can he sends, but he needs to do it MANUALLY everytime he sends an email -extremely error prone-
Is there a way i can set the "default send as" in outlook 2010?, i've been searching the forum and internet in general but the question other people do is not quite what i want here(always with multiple accounts, pop3, office 265, stuff like that)

Hi,
We can set the "default send as" in Outlook 2010, but we can only set it to the default email account.
To force all new messages to use the default email account, regardless of which pst file you are viewing, browse to the following registry subkey in Outlook 2010 and add a DWORD named NewItemsUseDefaultSendingAccount:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Mail
DWORD value: NewItemsUseDefaultSendingAccount
Value: 1
Important:
Serious problems might occur if you modify the registry incorrectly. Therefore, make sure
that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
However, in your case, we can't set the "default send as" account to shared mailboxes, it's a current product limitation.
Regards,
Melon Chen
TechNet Community Support

Override default send from email id and attachment name in email delivery

How to override the default send from email ID and attachment name to send an outbound document using Email Transport protocol in Oracle Integration B2B ?. I've seen that "[email protected]" and subject of the email message were used as send from email ID and attachment name respectively

Ramesh,
I set the send from email ID as Generic Identifier for host and send to email ID as Generic Identifier for trading partner and used it in the agreement. How ever still the email message is generated with "[email protected]" as send from email ID.
However I noticed that the "FROM" field in the wire message is updated with the correct send from email ID which I used as the Generic Identifier for host.
Please advise.

How do I access the photos and videos from my computer that I backed up from my phone to verizon backup assistant plus?

how do I access the photos and videos from my computer that I backed up from my phone to verizon backup assistant plus?

You can download the PC (or mac) desktop application.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=54607
or you can sign into My Verizon ( http://www.verizonwireless.com/myverizon ) then navigate to MyVerizon/Manage & Store media.

How to set email "from" address when sending photo

when I send photos from my iPhone people respond to the wrong address. This just started. How do I switch the FROM address to the correct email address.

The From address you want has to be your default account - you can set this in the Mail settings.

How to specify "From" address when sending Outbound e-mail from Siebel

Hi, when sending an e-mail to Outlook exchange server among all there are 2 fields: Sender and From, where Sender is an address of the profile from which e-mail will be sent and "From" address is the one that will be displayed to the receipient ("From" is not related to any profile and any e-mail address could be specified there).
My question is how can we specify this "From" address in Siebel while using standard e-mail functionality (Communications Outbound Manager sends data based on created activity record). Client wants to specify any e-mail address regardless ofcommunication profile used (which is only one).

Hi Mathan,
Please check sap note
SAP Note No. 1304146 Email Signatures feature note
1163250 - How to Create an Email Signature on several rows
I hope it will solve your issue.PLease mark thread as answerd.
Best Regards,
Atul

Email send from address switches after adding a recipient

I have two email addresses configured on my iphone 5. When I start a new message the default address appears
In the from line. When I add a recipient the from address then switches
To my other email address. I can then manually switch it back. This only started once I started using ios7.
Is there anything I can do to prevent this? Is this a known bug?
Thanks

Several errors in this code.
crlf VARCHAR2(2) := chr(13)||chr(10);Why use a DOS/Windows linefeed? The correct variable/constant to use is UTL_TCP.CRLF - and this is a single #10 character.
Do not assume that network servers use the same DOS/Windows linefeed char sequence.
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);Wrong. You need to identify your platform in the HELO command. Not tell the SMTP mail server who it is. (providing the wrong data should not cause a failure in this case, but that is no reason for getting this command's parameter wrong)
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);Just plain silly. You change a perfectly meaningful exception into a generic exception (number -20000). So the caller to your code gets a -20000 error code.. what does that mean? Was that a transient error (mail server commands can be retried)? Or is that a permanent error (mail server is for example down)?
Make exceptions MORE meaningful where needed. Do NOT make them meaningless by interfering with meaningful exceptions and turning these into useless generic exceptions.
Tried to add multi recipient by the below code but it does not works.
v_From := '[email protected]';
v_recipient := '[email protected]; [email protected]';
v_cc_Recipient := '[email protected]; [email protected]';
Wrong. This is not how one specifies multiple recipients. You should be reading RFC 2881 - the specification for the SMTP protocol - instead of making (incorrect) assumptions on about SMTP commands and parameters.
From RFC2881:
4.1.1.3 RECIPIENT (RCPT)
   This command is used to identify an individual recipient of the mail
   data; multiple recipients are specified by multiple use of this
   command. So a SINGLE recipient is specified as parameter. Multiple recipients are specified by multiple calls using this command.

Default "send using" address changes

When sending an email from the address book instead of the messaging inbox, the "send using" address changes between different email addresses instead of always using the default address. Is there anyway to fix this or do I just have to always send emails from the specific inbox instead of the address book. Thanks!

As a convenience feature, it is designed to remember the last address you sent "from "for that contact...and then uses it as the "from" the next time you send to that contact. I don't think that there is a way to defeat it.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When sharing photos between two users, if one user uploads new photos, only he can view them. Any help on this issue?

My iPhoto library is in Shared Folders so both users can access and edit the pictures. However, if one users uploads new photos, for some reason these become only available to him and the other user cannot even view them.
All permissions have been set so that both users have them on the shared folders. For some reason, when creating a folder, the permissions are not kept....
Please help.

The same thing has started happening to us since upgrading to iPhoto 11 and Lion. If I import photos from my camera, then my partner can see thumbnails of those photo, but cannot click them to see them sull size. Similarly if my partner imports photos.
We have used a shared iPhoto library stored in Users/Shared/Photos for several years and everything has been fine until now.
I am backing up now and will then check and repair the library permissions. I'll post back the results.

Edit send from address, email app closes spontaneously.

I type an email, then switch to "send from"
my other gmail address.
I scroll down, pull down to the address, and the app closes to home screen.
It occurs every time, first time.
Second try, it works.
What needs to be fixed so I don't waste 1 min every email I send?
Change the default address
I "send from"
How?
Thank you kindly
Sydney

Hi mmarenyi
In short it impossible to send emails from Apple's mail from an account that is not added through settings.
To provide some advice rather than adding the account due the amount of emails - I would suggest getting the Gmail app from the App store which will allow you to fetch your emails from your iPad without getting them in Apple's mail. If the other work email address is a common one such as: hotmail, gmail, big pond, yahoo ect, see if there is an app to download. Most email companies now have apps on the App store for download. You could if your work email does not have an app simply pick up your emails through safari.
I am assuming that your iPad is using iOS 7 or later, however these instructions will work for iOS 5 or later.
To get the Gmail app:
          1.          Go to the App store
          2.          Search for Gmail
          3.          Click on the free button
          4.          Wait for it to download
          5.          Put in your email and password
          6.          Then you will be able to access your gmail account without using Apple's mail
Enjoy and Many Thanks
iBenjamin Crowley

How do i change the sender / from address in mail? (MS Exchange)

I have set up an MS exchange account in Mail. In OSX Snow Leopard I could change the from address. This is necessary because my account username address is not the main address I use (I work in a company's sub division). So my from is not correct generally, and it's also annoying because my own address pops up when I do a reply all.
Any suggestions?

You can fix this problem by adding an entry into a file on your mac. You have to add an alias, but manually so by editing this file below:
I finally found a solution. You can edit this file where USERNAME = users acutal account on the mac:
Close Mail.
Go to:
/Users/USERNAME/Library/Mail/V2/MailData/accounts.plist
Under this:
            <key>EmailAddresses</key>
            <array>
                <string>[email protected]</string>
            </array>
Type:
            <key>EmailAliases</key>
            <array>
                <dict>
                    <key>alias</key>
                    <string>[email protected]</string>
                    <key>name</key>
                    <string>Name 1</string>
                </dict>
            </array>
Save version of file.
Open Mail.
I hope this helps - it seemed to work for me.

Default "send from" address when sharing photos in Backup Assistant Plus

Similar Messages

Maybe you are looking for