Default Services Settings

Hi,
I have a single Exchange 2013 server which seems to have gone a bit awry after a Security update was applied. The problem stems from the fact that all of my services were disabled after the update and when re- enabling all of them I set them all to automatic.
However there seems to be an issue with IIS which does not start and has to be manually started therefore OWA and other services don't run. I suspect therefore that some of my Exchange services or IIS itself should possibly be set to Automatic (Delayed
start) in order that the services start in the correct sequence thus enabling everything to stay up and running on completion of the start-up routine. Can anyone tell me what the correct settings should be so that I can eliminate this as
a potential cause before delving further into the potential reasons. Many Thanks

Hi,
Default IIS Virtual Directory settings can be observer here:
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

Similar Messages

Jabber 4 Everyone default service profile

Hello all,
A customer running UCM 9.1.2 with IM&P 9.1.2. They have rolled out Jabber Desktop as the default application for IM and Presence for the organization. We have setup several "SERVICE PROFILES" inside of UCM to differentiate between Ehanced Presence for employees that have both IP Phones and Jabber, and just Regular Presence for employees that do not have an IP Phone on the system. We made the Regular Presence the "DEFAULT SERVICE PROFILE" and then we ran a bulk update to update all users "currently" in the directory to have the option
HOME CLUSTER and ENABLE User for Unified CM IM and Presence.
CUCM is AD integrated so all the users come from AD
The issue we are experiencing is for any new hires, the account gets created in AD then eventually sync'ed into CUCM. We can't find a switch that allows us to make sure new users have certain "DEFAULT USER" settings namely "HOME CLUSTER" and "Enable User for Unified CM IM and Presence. So these new users are not getting this setting and can not login to Jabber until this occures
Thanks

Hi Ryan,
I have the same issue and at the moment no solution for that.
I have a bulk user template, so everytime new users come in, I bulk the setting over the new users.
Would be nice to see, if someone has another solution.
Best regards
Ben

Default printer settings for HP Deskjet 882c

All I want to do is set this printer to print in black and white by default. If I wanted color, I would use my other printer ... I want faster than a snails pace so I brought this one back out.
Being a PC for my entire life, this should be an easy thing to set the default print settings on the printer. I don't see them!
What I am printing is emails off hotmail ... tons of them ... going back months ... so please don't ask me to add an additional step here ...
Pulling my hair out here ... help would be lovely!

You are on the right track for sure. The claim code is in fact printed in blue, so if your color inks are low or empty it will not show up.
I noticed there are 2 version of the 6500A, I will go under the assumption that you do not have the 'Plus' version since you didn't specify this, shouldn't be a big discrepancy either way (let me know if I am wrong).
Viewing your ink levels is covered here, your Cyan ink cartridge could be empty : http://goo.gl/RjIhbp
You can still find the claim code on the front panel of your printer without color ink. Go back to web services on your printers display and it will show your "*@hpeprint.com" email address. The prefix before the "@" is in fact your code.
Also note that your code has most likely expired, which happens after 24 hours of being generated. Not a big deal. If your code has expired you will have to reset the web services in your printer, this will generate a new printer code. You can do this easily from the front panel of your printer.
Follow this link and expand the section “What if I lose my printer code before registering?” under “Frequently asked questions (FAQs)”
http://goo.gl/0WUyIe
(*a note on step 4, some firmware updates may have simplified this entire step to be simply “remove web services”)
After enabling the web services again the printer code area will still be blank if you are out of cyan ink.
Regardless the new code will display on the front panel (under web services).
I hope this gets you going with ePrint. Let me know if you are having issues printing in color beyond this, or if you are still experiencing difficulties with ePrint.
I work on behalf of HP.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Default User settings

I want to change the default user settings in iPlanet Directory Server 5.1 so admins can create individual users in the JAVA Console with the specific attributes needed by our organization per branch point.

key phrase: per branch point. I take it you mean that entries below a particular branch point share the same attribute/value pairs? That leads me to suspect that class of service would be of use to you, and the console would not need to change and your admins would not need to enter the info per user.

CTC DI all-in-one fails at Step: Upload Default ACL Settings

Hi,
i need your help.
I tried to install a NWDI on a SolMan (Rel. NW7.01 SP06).
I deployed the necessary SCAs (DI_CBS, DI_CMS and DI_DTR =7.01SP6).
At the next point I'd like to use the wizard for the initial setup (DI all-in-one) and here are my problem.
At the step "Upload Default ACL Settings" it aborts with the error: Not a valid URL: Unexpected character found [':' at position 7]
Here an an excerpt from the log:
================================================================================
Exception Class: java.net.MalformedURLException
Exception Message: Not a valid URL: Unexpected character found [':' at position 7]
Stack Trace
java.net.MalformedURLException: Not a valid URL: Unexpected character found [':' at position 7]
     at com.sap.ctc.util.infra.BaseConfig.dispatchException(BaseConfig.java:243)
     at com.sap.ctc.util.di.services.DTRServices.checkinFiles(DTRServices.java:373)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Caused by: java.net.MalformedURLException: Not a valid URL: Unexpected character found [':' at position 7]
     at com.sap.dtr.client.lib.protocol.impl.URLScanner.next_token(URLScanner.java:587)
     at com.sap.dtr.client.lib.protocol.URL.parse(URL.java:521)
     at com.sap.dtr.client.lib.protocol.URL.(URL.java:63)
================================================================================
I checked the default Users. The NWDI_ADM, NWDI_DEV and NWDI_CMS (The NWDI_CMS was manuel created) exists and have the expective roles/groups and actions (e.g. NWDI_ADM = Group NWDI.Administrator = Role NWDI.Administrator + Action LcrInstanceWriterAll)
I checked the log/protocol and the strange argument there is dtrUrl : http://:/dtr.
I think the wizard is missing the right hostname an port for the as java. I tried to execute the Wizard with FQDN, simple hostname, localhost and edited also the host-file (like in other threads proposed).
The check of the SLD-Connection in the SLD-DataSupplier in the VA are OK (the http-settings and CIMClient Test works fine).
I spent a lot of time at the VA and configtool to finde the possible key with the missing value for the host an port, However with no success.
So now im here and hope some of you can give me an advice.
Best regards
Denis
Edited by: Denis Stricker on Jan 6, 2012 1:48 PM

Hello Denis
I have checked the attached error together with our expert for the DI
configuration wizard and found that the problem is most liked caused
by some variables that are not properly set by the underlying
framework (CTC framework) due to problems with the data bindings.
To investigate the problem in more details it is important for us to
know how the engine was being setup. Can you please let us know if you
directly installed the engine or if you upgraded an existing
engine? In case of an upgrade can you please tell us
which SP had the engine before the upgrade?
So if you upgraded from an earlier SP this might explain
your problem and we would directly know in which area to look.
Unfortunately we cannot offer automatic configuration
after an upgrade case (see our central CTC note: 923359) exactly for
such reasons (besides of that CTC don't know the state after the
upgrade). Configstore does not offer to add new parameters only to
modify.
As workaound you can try to run DI template and everytime where it
stops, do the step manually and skip the not working step.
Thanks
Kenny

Default Apps Settings Not Staying Set

I have noticed that my default application settings keep resetting themselves each time I reboot. My default browser, mail app, EVERYTHING... without fail. Does anyone have a clue as to what would cause this to happen?

Try resetting the Launch Services database.
It contains that info, and may be corrupt.
Open /Applications/Utilities/Terminal, copy the following text in, and press return.
/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.fram ework/Support/lsregister -kill -r -domain local -domain system -domain user
Good luck!

Default application settings loses on restart or LaunchServices problem?

Hello,
Problem:
After doing this tutorial:http://support.apple.com/kb/HT1428. I have a problem with default application settings (file association). In other words, file function "Open with" is empty. I chose default app for specific file type, do function "change all" (or just start specific application) and everything works fine. Files are associated whit that app. But after restar (or shutdown) every association is reset to none (open whit also empty). FileVault is off.
So after restart I must to associate files whit programs manual, or launch all programs.
What I tried:
Deleting com.apple.LaunchServices.plist - no help
Script run in Terminal: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/Support/lsregister -kill -seed - works, restores default applications and Open with list (but only till restart)
Onyx app - no help
MAINTENANCE app- works after first restart, after second restart the same problem
RCDefaultApp app- no help
Please any advice?

Here is output:
Step1:
none
Step2:
sudo: can't open /private/etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting
Step3:
com.paragon.ntfs.upd
com.paragon.ntfs.trial
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
com.adobe.AAM.Scheduler-1.0
Step4:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
npContributeMac.bundle
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
NTFSforMacOSX.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
com.adobe.SwitchBoard.monitor.plist
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
.DS_Store
0023eur_.ttf
0024eur_.ttf
0025eur_.ttf
0026eur_.ttf
0286eur_.ttf
0626eur_.ttf
0628eur_.ttf
0895eur.ttf
AGENCYB.TTF
ARBLI___.TTF
Aeroportal_Bold.ttf
BAVEUSE.TTF
CANDARA.TTF
CANDARAB.TTF
Calibri Bold Italic.ttf
Calibri Bold.ttf
Calibri Italic.ttf
Calibri.ttf
DINGMAPS.TTF
FUTUBC1.TTF
FUTURAMC.TTF
FUTURA~2.TTF
Franklin Gothic Book Italic.ttf
Franklin Gothic Book.ttf
Futura.ttc
Groovy Fast.ttf
Grover-Bold.otf
GroverCaps-Bold.otf
GroverCaps.otf
GuardianEgyp-Black.otf
GuardianEgyp-BlackIt.otf
GuardianEgyp-Bold.otf
GuardianEgyp-Hairline.otf
GuardianEgyp-HairlineIt.otf
GuardianEgyp-Light.otf
HelveticaNeue-Black.otf
HelveticaNeue-BlackCond.otf
HelveticaNeue-BlackCondObl.otf
HelveticaNeue-BlackExt.otf
HelveticaNeue-BlackExtObl.otf
HelveticaNeue-BlackItalic.otf
HelveticaNeue-Bold.otf
HelveticaNeue-BoldCond.otf
HelveticaNeue-BoldCondObl.otf
HelveticaNeue-BoldExt.otf
HelveticaNeue-BoldExtObl.otf
HelveticaNeue-BoldItalic.otf
HelveticaNeue-BoldOutline.otf
HelveticaNeue-Condensed.otf
HelveticaNeue-CondensedObl.otf
HelveticaNeue-ExtBlackCond.otf
HelveticaNeue-ExtBlkCondObl.otf
HelveticaNeue-Extended.otf
HelveticaNeue-ExtendedObl.otf
HelveticaNeue-Heavy.otf
HelveticaNeue-HeavyCond.otf
HelveticaNeue-HeavyCondObl.otf
HelveticaNeue-HeavyExt.otf
HelveticaNeue-HeavyExtObl.otf
HelveticaNeue-HeavyItalic.otf
HelveticaNeue-Italic.otf
HelveticaNeue-Light.otf
HelveticaNeue-LightCond.otf
HelveticaNeue-LightCondObl.otf
HelveticaNeue-LightExt.otf
HelveticaNeue-LightExtObl.otf
HelveticaNeue-LightItalic.otf
HelveticaNeue-Medium.otf
HelveticaNeue-MediumCond.otf
HelveticaNeue-MediumCondObl.otf
HelveticaNeue-MediumExt.otf
HelveticaNeue-MediumExtObl.otf
HelveticaNeue-MediumItalic.otf
HelveticaNeue-Roman.otf
HelveticaNeue-Thin.otf
HelveticaNeue-ThinCond.otf
HelveticaNeue-ThinCondObl.otf
HelveticaNeue-ThinExt.otf
HelveticaNeue-ThinExtObl.otf
HelveticaNeue-ThinItalic.otf
HelveticaNeue-UltLigCondObl.otf
HelveticaNeue-UltLigExtObl.otf
HelveticaNeue-UltraLigCond.otf
HelveticaNeue-UltraLigExt.otf
HelveticaNeue-UltraLight.otf
HelveticaNeue-UltraLtItal.otf
HoneyScript-Light.ttf
HoneyScript-SemiBold.ttf
IRONMAN_.TTF
MyriadPro-Black.otf
MyriadPro-BlackSemiExt.otf
MyriadPro-BlackSemiExtIt.otf
MyriadPro-BoldSemiExt.otf
MyriadPro-BoldSemiExtIt.otf
MyriadPro-SemiExt.otf
Saginaw Bold.ttf
Saginaw Light.ttf
Saginaw Medium.ttf
Sansation_Bold.ttf
Sansation_Bold_Italic.ttf
Sansation_Italic.ttf
Sansation_Light.ttf
Sansation_Light_Italic.ttf
Sansation_Regular.ttf
Santa Fe LET Fonts
Savoye LET Fonts
Scriptina Pro.ttf
Wingdings.ttf
Zodiastic.ttf
arialbd.ttf
arialbi.ttf
ariali.ttf
din-abl_.ttf
din-abll.ttf
din-al__.ttf
din-all_.ttf
din-aml_.ttf
din-bl__.ttf
din-bll_.ttf
din-ll__.ttf
din-lt__.ttf
frutblv_.ttf
frutblvi.ttf
frutlv__.ttf
frutubv_.ttf
frutv___.ttf
frutvb__.ttf
frutvbi_.ttf
frutvi__.ttf
futbclt.TTF
futura-bold-bt.ttf
futura-md-bt-medium.ttf
merge_light.otf
neuropolitical rg.otf
nhelblcv_1.ttf
nhelmv__1.ttf
phagspab.ttf
rotis1vb_1.ttf
rotissv1_1.ttf
rotissvi.ttf
science.ttf
segoeprb.ttf
segoescb.ttf
segoeui.ttf
techniqo.ttf
ufonts.com_00cryonixbold.ttf
ufonts.com_078mksdmediumcondensed.ttf
ufonts.com_a_technocratbroken.ttf
ufonts.com_agencyfb-blackcondensed.ttf
ufonts.com_agencyfb-regularcondensed.ttf
ufonts.com_arenacondensed-bold.ttf
ufonts.com_endzonecondensed.ttf
wingding.ttf
wmfood2.TTF
wstartt2.ttf
y2kboogie.ttf
zenon1.ttf
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.ABExchangeSource.DD57C94C-A28C-43D6-86D1-DF0 944A06ED2.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
Library/PreferencePanes:
.SO0pb0Capdhc9KjH8+pS
Step5:
iTunesHelper, Lion Launch Services Fix, moveAddict
(Lion Launch Services Fix- I use it for reseting launchservice after restart)

Anywhere Access: There is an error in your Remote Desktop Services Settings.

On my server2012 Essentials machine Anywhere Access is giving me this error:
"There is an error in your Remote Desktop Services Settings." and tells me it cannot be automatically repaired and to contact support.
Here's where I made my mistake: I went into IIS and changed the bindings for the Default Website to another port than 443, but then changed it back again.
Is this a cerificate Issue? Or any other cause? Could anyone help me to solve this problem?

Hi ErikLely,
Before going further, would you please let me know if the error message you described was complete? If not, please post the complete error message or provide a screenshot.
It will help us to narrow down this issue. Besides, can you remember which operation you do before this issue occurred or just sudden?
In addition, please check the Event Viewer. In Event Viewer, please follow the path:
Applications and Services Logs-> Microsoft->
Windows-> TerminalServices-LocalSessionManager and
TerminalServices-RemoteConnectionManager. If any errors you can find, please don’t hesitate to post it here and let me know.
By the way, please refer to the following article and check if configure Access Anywhere correctly.
Manage Anywhere Access in Windows Server Essentials
http://technet.microsoft.com/en-us/library/jj730374.aspx
Please also refer to the following articles and do some general troubleshooting, then check if can narrow down this issue.
Troubleshoot Anywhere Access in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj673001.aspx
Remote Desktop Services: Troubleshooting
http://technet.microsoft.com/en-us/library/ff404143(v=WS.10).aspx
Hope this helps.
Best regards,
Justin Gu

Excel 2010 not using the default print settings

Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
tried restarting print spooler service and re-installing office but this has come to no avail,
any ideas would be much appreciated!

Hi,
This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
To specify these settings, follow these steps:
1.Start Excel, and then open the workbook you want to change.
2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
3.Click the Page tab.
4.Under Paper size, click the paper size that you want.
5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps: ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
tray in the Other pages list.
Default tray is the default setting in both of these lists.
◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
To do this, click the appropriate paper tray in the First page list and in the Other pages list.
6.If you want to change the page orientation or its page margins, click the Finishing tab.
7.Select the options that you want.
8.Click OK.
9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
Jaynet Zhang
TechNet Community Support

Default services ...Calendar, Contact list, Messaging

Hope someone can help
New to BB
Set it up 10 days ago, works OK, but an app does not work
Got me looking at settings etc
In the DEFAULT SERVICES section of ADVANCED OPTIONS
the calendar (CICAL) and messaging (CMIME) are set to the correct e-mail address
but the contact list (SYNC) is set to an incoreect e-mail address
This does not have a drop down box (like the other two)...so apparantly I can t change it
buit I need it to be the same as the Calendar & messaging setting
Can anyone help me please ?
Thanks alot
Alan

AlanKent wrote:
2) I dont know whether BIS /  BES...how do I find out ?
BIS - (BlackBerry Internet Service) personal account and device
BES - (BlackBerry Enterprise Service) most often a corporate provided and connected to corporate exchange email accounts.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Default service(application:cisco) not available from CIPC

I search to have more informations on Default service of CUCM because I cannot reach them for my CIPC and if the problem is a network problem I will need to know the port
Best regards,.

Thanks for your response Ram
If this is a manual step (which I believe it is), this is not something I did when I originally provisioned the MMS.
But I have tried it, and still, the Terms Sets are not available when I go to Site Settings > Term Store Management
Just to confirm what I just attempted:
Central Admin > Application Management > Manage Service Applications > %ManagedMetaDataService% > Permissions
Under Connection Permissions, I added the service account which is the identity for the Web Application and gave it
'Full Access to Term Store'
Is there an additional step I missed? I have looked at the SQL permisisons as they all seem fine.

Any way to override default printer settings into a PDF

Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents. We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand. This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change. The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different. While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings. For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
Is there anyway to do this? I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc. Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
-Brandon

Hi Brandon,
You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
1. Open the PDF in Acrobat
2. Open Document Properties dialog (using Ctrl + D)
3. Select the "Advanced" tab
4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
Please let us know if this works for you
Thanks,
-Shilpi

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

HT5139 Is this really the only way to back up service settings?

Am I completely missing something here, or is Time Machine supposed to be the only easy way to back up service settings in Mountain Lion with Server.app? Is there really no way to export/import service settings anymore? It sounds to me from what I've read and seen of Server.app that if, for example, my DHCP settings get mucked up, I have to take the entire server offline, boot to the recovery partition, and restore from Time Machine? I can't just stop that ONE service and re-import the settings while leaving everything else up and running for 100+ users? Someone please tell me I'm missing something obvious.

Which service?
The "serveradmin" command line controls are always available. They can do much more than the GUI can.
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/ man8/serveradmin.8.html
http://manuals.info.apple.com/en_US/MacOSXSrvr10.3_CommandLineAdminGuide.pdf

Changing Lion PDF default security settings

After I create a document in Word or Pages, I save them as a pdf. I then want to digitally sign them in Adobe Reader. But the default security settting when saving as a pdf does not allow adding a digital signature. Anyway to change the default OSX settings so that digital signatures are allowed by default?
Preview just ignores digital signatures so I have not found any work arounds there.
...Bruce...

I'm OK with how to remove the security settings from a document: Documents > Properties (security tab; "No Security").
What I'm looking for is the path to removing the security settings such that they are NOT applied when I convert a document to PDF. What is happening now is that when I convert a MS Word doc to PDF, the security settings are applied by default, which means I have to go the process, albeit a short one, of removing the security settings from the document - as referenced above.
So again, if I simply launch Acorbat Pro 9 (without opening of a document), what is the correct path to removing (permenently) the security settings so that they are no longer applied to a converted document by default?
Thanks in advance.

Default Services Settings

Similar Messages

Maybe you are looking for