Default Settings in PSPWare

Is everyone sticking with the defaults? 320x240 resolution and normal sound/video quality?

na i use high quality video and almost high audio in pspware.
unless i do widescreen then i change that option

Similar Messages

Why does iTunes keeps resetting itself to default settings randomly??

Downloaded three upgrades so far, and sometimes I turn on my computer to find that iTunes has all default settings, forgotten my library's name and lists.
Upgrading/reinstalling did not solve the issue. It really ****** me off to "reprogram" the iTunes to my liking every other time I open it.
No error messages or windows, no warnings, just freshly new every time.
Anyone experiencing this? What can be done?

Unfortunately, I can't offer any solution because I'm experiencing the same kind of trouble. Please help us! It would be greatly appreciated.
Cheers,
-- D

How to change default settings for a video generator?

I'm using a video generator (Lyric Media's Pan Zoom Pro) many times in the same project, and have to change the default settings for each new instance of the generator that I create. I'm wondering if there's any way to change the default settings for a generator (i.e., length of clip, individual slider and checkbox settings in the "controls" tab) so that each new instance automatically has my customized settings when I first open it.
Thanks.

That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

How do you stop DNG Converter from embedding Adobe's ACR default settings instead of custom settings?

I notice that the new version of Adobe DNG Converter (8.6, and maybe earlier) appears to place Adobe's ACR defaults in the converted file. Thus, the converted files open up in Bridge with an indication that they already have settings made, and, hence, ACR does not apply the custom camera settings. One has to Clear Settings first in Bridge, then open in ACR.
This behavior is new, perhaps to 8.6. But it's presence defeats the purpose of having custom Camera Defaults.
Is there any way to prevent DNG Converter from installing settings?

ssprengel wrote:
What do you mean by “custom camera settings”? Do you mean you’ve changed the Camera Raw defaults for a particular camera and those aren’t being seen until you do a Reset? Or do you mean some sort of Nikon-settings that Adobe never looks at?
Also at what point in the workflow are you converting these files, just after copying them to your hard-disk and before touching them with any other Adobe software, or after they’ve been adjusted in Nikon software, or after they’ve been adjusted in Bridge/ACR, initially as NEFs?
I mean my custom camera defaults that are set by the Save New Camera Defaults for a given camera.
My workflow is to take my original raw files first into Adobe DNG Converter. I then open the folder in Bridge. At this point I notice that my original raw files remain unaltered (there is no "settings" icon in the top right corner – circle with two lines and up-arrows – in the image's thumbnail), but the converted dng's (otherwise untouched and unopened in ACR) have a "settings" icon. When I open the original raw file in ACR, it opens using my custom camera defaults. When I open the otherwise virgin dng in ACR, it opens using the Adobe defaults (the same defaults that would be employed if no custom camera default had been set).
This behavior is new. DNGs formed by earlier versions of the DNG Converter did not apply any settings to the converted file, and when they opened in Bridge, they were given the custom camera settings.
In order to retain the old (and proper) behavior, I now have to take the just-converted documents into Bridge, select them, and immediately apply Develop Settings/Clear Settings. That gets rid of the settings that have been installed by the DNG Converter (as well as the "settings" icon on the thumbnail).
I notice there is a new feature in Adobe DNG Converter 8.6, namely, a panel-specific toggle between the settings and the default settings. This indicates to me the likelihood that Adobe has been making some alterations with the settings that is having unintended consequences. It clearly is not proper for DNG Converter to be adding (installing) settings, because that prevents the custom camera default settings from being applied, and hence defeats the purpose of the custom camera default settings.

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

How do I change the default settings for opening documents on my macbook?

Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
You can only assign one default application to one type of document.

Is it possible to create a new tab in 'Default settings for items' option?

Hi everybody
I am Raghu working in EBP2.0 & I have come across a difficlty and that is of creating a new tab and also the fields 'GL a/c', 'cost centre' or 'internal order' in this new tab.
First of all please let me know whether is it possible to create a new tab for these fields.
The purpose of this new tab is to default the cost centre and GL account with reference to shopping cart.
As per current scenario, user has to enter the cost centre & the GL code as many times as the number of items in a shopping cart. I mean, if you have 10 items in your shopping cart then 10 times user has to input the cost centre & GL account. To avoid this we are required to add new tab so that per shopping cart we can enter the GL account & cost centre only once.
Your immediate response would be very much apprecited.
Regards
Raghu

hi Ram & Sreenivas
Thanks for your immediate response.
Ram, we can default GL a/c & cost centre in org structure since client wants to us to keep the option of entering these for every shopping cart.
Sreenivas, I checked the 'copy to clipboard' option & its not there in EBP2 and I feel what you meant as cost centre tab is account assignment tab.
Let me explain you more clearly about this requirement.
Current Scenario
1.Say a user has added 5 items to his SC.
2.User has to enter cost centre & GL code 5 times & then he can order
Required scenrio
1.Say a user has added 5 items to his SC.
2.As per the proposed functionality, user will click on 'Default settings for items' button. Three tabs will appear-->Basic data, Internal note & Delivery Address.
We have to provide a new tab here where in user will default his GL & cost centre for this shopping cart & then order. This will help user to avoid entering GL & cost centre 5 times.
For some reasons our client is not interested in defaulting this data.
Please help in this regard if time permits.
Thanks
Raghu

'the preferences file is corrupt and has been reset to the default settings' - cs4 Mac

greetings!
every time i start illustrator i encounter a new error.
"the preferences file is corrupt and has been reset to the default settings."
"the corrupt file will be backed up as Adobe illustrator Prefs.err"
this problem manifested after i added some more .ai and .ase files to my swatches directory. i do not believe anything else changed.
not sure how to diagnose the problem. is there a debug mode or something? perhaps an offending file.
an option would be to try remove each added swatch file or folder individually, but this would be a very very time consuming process for me.
i use cs4 on a Macbook pro running Snow Leopard - 10.6.2 and would appreciate your advice.
thank you
-s

s,
Every time you close down Illy, the current preferences (which may have been changed while you worked on files) are saved, and every time you start up Illy, those preferences will be used.
Usually, preference corruption probably occurs randomly, caused by the OS, but if something in your files change the preferences to something that is not viable you will get an error like that.
You may press Cmd+Option+Shift during startup, which will replace the current preferences with the defaults, and probably you will get rid of the error message. It is probably not a cure, though.
If the error is persistent, the cure would be to get rid of the offending things in the files you work with.

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

My Time Capsule has stopped working. Restoring default settings does not work.

I have a 2TB Time Capsule (Model No. A1409). I think that it is approximately 20 months old. It has been working very well until around two months ago, when it began to display the flashing amber light. At that time I performed a hard reset, restoring the default settings. This worked and the capsule continued backing up perfectly for a further three weeks. However, about three weeks back the flashing amber light returned. As I have been busy elsewhere I was not able to attend to this untl recently. It does not seem to matter how many times I reset the device, I cannot return it to a working state.
The capsule has previously been set up to connect to the internet through my existing broadband service. As such, it was initially set up and subsequently restored wirelessly. I no longer seem to be able to achieve this. Has anybody else experienced similar difficulties and if so, were you able to remedy it.
Grateful for any advice. I feel another trip to the Genius Bar coming on.

Yeah absolutely - no problem.
I had the same thing happen where I did a restore on my personal TimeCapsule (TC),
and when I updated the device after installing it, it for some reason set the TC into bridged mode shutting off DHCP/NAT service.
Which means, that it doesn't reserve an IP for any client trying to attach. This is what it sounds like yours is doing.
So if you see that it says bridged, and that box with dhcp reservation is greyed out, change it from bridged to DHCP/NAT.
This will allow any client (computer/device) to attach and reserve an IP address for access to the internet.
Once that is set, and you update, hopefully the light should go green.
I would also recommend checking the "internet" tab, and making sure that your IP address is assigned using DHCP. (It probably is - but that part is essential for communication with your Internet Service Provider (ISP)...
SO - if the device goes green after the update:
If it does, then go back into the router and click on the wireless tab and confirm your wireless settings are correct, if any changes are made, update.
At that point, you should be able unplug your laptop to wirelessly connect to the router.

Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers

Printer Queue Settings Mysteriously Reverting Back to Default Settings on 2008 R2 print servers
We have 4 Windows Server 2008 R2 print servers, all of which has the same printer queues installed on them that are utilized by a 3rd party printing program that does a round-robin load balancing scheme.
All printers are a combination of HP and Xerox all running some variation of the HP UPD and the Xerox UPD. Some use the PCL 5 and some use the PCL 6 version determined by age of printer and need.
There are typically two printer queues for each physical printer.
Example:
LOCATION_ROOM
LOCATION_ROOM_TRAY2
The regular queue is ok being left with default setting,
The _TRAY2 queues are set to print to "labels" or "pre-printed" paper type or a specific tray.
From time to time, these _TRAY2 queues will revert back to a factory default state and lose the setting to print to a specific paper type or tray. Sometimes it happens to the _TRAY2 queue on all 4 servers, sometimes just 1 server, etc. No rhyme
or reason.
Disabled Bi-directional options on both the HP and Xerox UPDs per another article on the internet that said bi-directional could cause the printer to send back settings to the driver and cause this issue. Even with this option off, we continue to see
printer _TRAY2 queue settings revert back to factory default and lose their specific paper and tray settings. We have ruled out the possibility that users or other technicians are the ones making these changes so we suspect it is some interaction between
the servers, printer drivers and printers themselves causing the issue.
Any insight would be greatly appreciated.

I'd start by using one of the print drivers included in Windows for a few of the printers and confirm it's the universal driver that is causing the issue.
HP installs some other processes and services on the machine which communicate with the HP devices.
PML and something else. You might want to shut those down and see if these processes are the ones modifying the settings.
Run process monitor to truly identify which processes is causing the modifications.
Alan Morris formerly with Windows Printing Team

How do I change the default settings in a printer's Default Settings Preset?

I am running Mavericks, printing to an HP LaserJet 4050N via IP. [The following behavior takes place whether the printer's internal settings are set to Duplex Printing is On or is Off.]
I would like to set the default to print duplex, whether I am in an application or 'drag and drop' a file onto the printer icon (which temporarily opens the application, prints the document, and quits).
I do not seem to be able to modify the "Default Settings" Preset to specify duplex printing. However, I have been able to create a new "Default Settings-1" Preset that specifies duplex printing. By selecting the "Default Settings-1" Preset, in any application, I get duplex printing without any problem.
First -- problem:
If I drag-and-drop a file -- e.g., .pdf or .docx -- onto the printer icon, it opens the application and uses the "Default Settings" Preset -- not the "Default Settings-1" Preset -- and prints single-sided. How do I get drag and drop to use the "Default Settings-1" Preset to get duplex printing?
Second -- issue:
Bizarrely, if I am in an application, select "Show Presets", select "Default Settings-1" and click on "Layout", it sometimes shows that "Two-Sided" printing is "Off" and sometimes that it is set to "Long-Edge Binding" -- but that seems to have no deleterious effect on duplex printing!
Any suggestions / explanations for my problem / issue?
Thanks much,
Avi

Other than using the CUPS interface, http://127.0.0.1:631,which it sounds like you've done, I don't think there is a way to edit the Default Settings. The standard approach is to create a preset, the solution you've found.
For drag and drop printing, you should be able to get to the print dialog and select your preset or turn duplex on by holding the option key down, selecting the file, then doing the drag and drop (either to a printer or to an open printer proxy application).
I realize this isn't a solution, but I hope it's helpful.

How do I change the default settings on ical

how do I change the default settings on ical - I upgraded to Lion and now every event is automatically clicked as an "all day" and when I unclick the "all day" it gives me an 8 hour window for my event instead of the 1 hour that I prefer! Help!

Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
You can only assign one default application to one type of document.

Custom options in Adobe PDF printer are not showing up in "Default Settings"

Hello,
I am using Windows 7 and I am trying to create custom "Default Settings" in my Adobe PDF printer. When I make edits to an existing setting, click "Save As..." and save with a new filename, the new settings are not showing up in the "Default Settings" drop down box in the "Adobe PDF Settings" tab of the "Adobe PDF Document Properties" dialogue box. I can confirm that the new settings are indeed saved on my hard drive and are located in:
C:\Users\[Username]\AppData\Roaming\Adobe\Adobe PDF\Settings
No matter how many different custom settings I save as described above, they are simply now showing up. This works for me on other computers, but just happens not to work on my current one, which recently had an OS reinstall from scratch. Prior to the reinstall, it worked just fine on my computer (an ASUS UX31A laptop). The included pictures demonstrate what I'm talking about.
Any thoughts?

I finally solved this. The path for the Adobe PDF Settings was set to the follwing in the registry (HKEY_CURRENT_USER\Software\Adobe\PDF Settings):
C:\Users\%USERNAME%\AppData\Roaming\Adobe\Adobe PDF\Settings\
Even though "%USERNAME%" should work, it doesn't. I just replaced it with my actual username and it worked.

Purchase Order Default Settings

Hi,
I want to make 'S-Based IV' and 'GR-Bsd IV' as defaulted settings for all Purchace Orders.
Where can i configure the same in IMG.
Please advise.
Thanks in Advance,
Safi

Go to XK02, Select your Vendor and all....
now go to Purchasing Data, Here you can set these Indicator.
or in ME12, In Purchasing Data You can set the same.
Then it will be defaulted to Purchase Order.

Default Settings in PSPWare

Similar Messages

Maybe you are looking for