Default settings in Reader

Hi,
Wher can you make default settings for page browsing in Adobe Reader? I remember being prompted to do this on an occasion after installing Adobe Reader. Now, I want to change the setting for page browsing but cannot find the place to do so.
Thankful for a hint
Inquisitor55

I am getting the exact same issue, could someone please explain what is happening here.
Thank you.

Similar Messages

  • How do I change default settings in photoshop elements 9?

    I am not happy with most of the default settings, I had my own settings saved, but i do not know how to activate them. Does anyone know how to do this on a MAC?

    What default settings?

  • Where are Develop Default Settings stored for LR 5 in Win 8.1

    I want to use my Default Settings on another computer, so I need to find them and then copy them to the correct folder in the second computer.
    Second question. If I also happen to apply a Preset during Import that has some of the same Develops as my Default Settings, like Lens Corrections or Sharpening, what will happen? Will the effects be cumlative/additive/doubled or will LR only apply the effect once?
    Thanks

    Rob Cole wrote:
    1. App-data for camera raw, which on my PC is here:
    C:\Users\{me}\AppData\Roaming\Adobe\CameraRaw\Defaults
    Ok thanks. So it seems I will have to copy both of these folders to the second computer to duplicate all my presets, default settings, etc.
    C:\Users\{me}\AppData\Roaming\Adobe\CameraRaw
    C:\Users\{me}\AppData\Roaming\Adobe\Lightroom
    Rob Cole wrote:
    2. All presets in Lr are absolute, which means if setting is included in preset, it will overwrite previous value.
    So on Import the camera specific Default settings take effect and then any Preset values applied during Import would overwrite any similar values that had been initially applied by the Default Settings?

  • Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

    hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • How do you stop DNG Converter from embedding Adobe's ACR default settings instead of custom settings?

    I notice that the new version of Adobe DNG Converter (8.6, and maybe earlier) appears to place Adobe's ACR defaults in the converted file.  Thus, the converted files open up in Bridge with an indication that they already have settings made, and, hence, ACR does not apply the custom camera settings.  One has to Clear Settings first in Bridge, then open in ACR.
    This behavior is new, perhaps to 8.6.  But it's presence defeats the purpose of having custom Camera Defaults.
    Is there any way to prevent DNG Converter from installing settings?

    ssprengel wrote:
    What do you mean by “custom camera settings”?  Do you mean you’ve changed the Camera Raw defaults for a particular camera and those aren’t being seen until you do a Reset?  Or do you mean some sort of Nikon-settings that Adobe never looks at?
    Also at what point in the workflow are you converting these files, just after copying them to your hard-disk and before touching them with any other Adobe software, or after they’ve been adjusted in Nikon software, or after they’ve been adjusted in Bridge/ACR, initially as NEFs?
    I mean my custom camera defaults that are set by the Save New Camera Defaults for a given camera.
    My workflow is to take my original raw files first into Adobe DNG Converter.  I then open the folder in Bridge.  At this point I notice that my original raw files remain unaltered (there is no "settings" icon in the top right corner – circle with two lines and up-arrows – in the image's thumbnail), but the converted dng's (otherwise untouched and unopened in ACR) have a "settings" icon.  When I open the original raw file in ACR, it opens using my custom camera defaults.  When I open the otherwise virgin dng in ACR, it opens using the Adobe defaults (the same defaults that would be employed if no custom camera default had been set).
    This behavior is new.  DNGs formed by earlier versions of the DNG Converter did not apply any settings to the converted file, and when they opened in Bridge, they were given the custom camera settings.
    In order to retain the old (and proper) behavior, I now have to take the just-converted documents into Bridge, select them, and immediately apply Develop Settings/Clear Settings.  That gets rid of the settings that have been installed by the DNG Converter (as well as the "settings" icon on the thumbnail).
    I notice there is a new feature in Adobe DNG Converter 8.6, namely, a panel-specific toggle between the settings and the default settings. This indicates to me the likelihood that Adobe has been making some alterations with the settings that is having unintended consequences.  It clearly is not proper for DNG Converter to be adding (installing) settings, because that prevents the custom camera default settings from being applied, and hence defeats the purpose of the custom camera default settings.

  • How do I change the default settings for opening documents on my macbook?

    Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

    Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
    You can only assign one default application to one type of document.

  • 'the preferences file is corrupt and has been reset to the default settings' - cs4 Mac

    greetings!
    every time i start illustrator i encounter a new error.
    "the preferences file is corrupt and has been reset to the default settings."
    "the corrupt file will be backed up as Adobe illustrator Prefs.err"
    this problem manifested after i added some more .ai and .ase files to my swatches directory. i do not believe anything else changed.
    not sure how to diagnose the problem. is there a debug mode or something? perhaps an offending file.
    an option would be to try remove each added swatch file or folder individually, but this would be a very very time consuming process for me.
    i use cs4 on a Macbook pro  running Snow Leopard - 10.6.2 and would appreciate your advice.
    thank you
    -s

    s,
    Every time you close down Illy, the current preferences (which may have been changed while you worked on files) are saved, and every time you start up Illy, those preferences will be used.
    Usually, preference corruption probably occurs randomly, caused by the OS, but if something in your files change the preferences to something that is not viable you will get an error like that.
    You may press Cmd+Option+Shift during startup, which will replace the current preferences with the defaults, and probably you will get rid of the error message. It is probably not a cure, though.
    If the error is persistent, the cure would be to get rid of the offending things in the files you work with.

  • My Time Capsule has stopped working.  Restoring default settings does not work.

    I have a 2TB Time Capsule (Model No. A1409).  I think that it is approximately 20 months old.  It has been working very well until around two months ago, when it began to display the flashing amber light.  At that time I performed a hard reset, restoring the default settings.  This worked and the capsule continued backing up perfectly for a further three weeks.  However, about three weeks back the flashing amber light returned.  As I have been busy elsewhere I was not able to attend to this untl recently.  It does not seem to matter how many times I reset the device, I cannot return it to a working state.
    The capsule has previously been set up to connect to the internet through my existing broadband service.  As such, it was initially set up and subsequently restored wirelessly.  I no longer seem to be able to achieve this.  Has anybody else experienced similar difficulties and if so, were you able to remedy it.
    Grateful for any advice.  I feel another trip to the Genius Bar coming on.

    Yeah absolutely - no problem.
    I had the same thing happen where I did a restore on my personal TimeCapsule (TC),
    and when I updated the device after installing it, it for some reason set the TC into bridged mode shutting off DHCP/NAT service.
    Which means, that it doesn't reserve an IP for any client trying to attach. This is what it sounds like yours is doing.
    So if you see that it says bridged, and that box with dhcp reservation is greyed out, change it from bridged to DHCP/NAT.
    This will allow any client (computer/device) to attach and reserve an IP address for access to the internet.
    Once that is set, and you update, hopefully the light should go green.
    I would also recommend checking the "internet" tab, and making sure that your IP address is assigned using DHCP. (It probably is - but that part is essential for communication with your Internet Service Provider (ISP)...
    SO - if the device goes green after the update:
    If it does, then go back into the router and click on the wireless tab and confirm your wireless settings are correct, if any changes are made, update.
    At that point, you should be able unplug your laptop to wirelessly connect to the router.

  • How do I change the default settings in a printer's Default Settings Preset?

    I am running Mavericks, printing to an HP LaserJet 4050N via IP.  [The following behavior takes place whether the printer's internal settings are set to Duplex Printing is On or is Off.]
    I would like to set the default to print duplex, whether I am in an application or 'drag and drop' a file onto the printer icon (which temporarily opens the application, prints the document, and quits).
    I do not seem to be able to modify the "Default Settings" Preset to specify duplex printing.  However, I have been able to create a new "Default Settings-1" Preset that specifies duplex printing.  By selecting the "Default Settings-1" Preset, in any application, I get duplex printing without any problem.
    First -- problem:
    If I drag-and-drop a file -- e.g., .pdf or .docx -- onto the printer icon, it opens the application and uses the "Default Settings" Preset -- not the "Default Settings-1" Preset -- and prints single-sided.  How do I get drag and drop to use the "Default Settings-1" Preset to get duplex printing?
    Second -- issue:
    Bizarrely, if I am in an application, select "Show Presets", select "Default Settings-1" and click on "Layout", it sometimes shows that "Two-Sided" printing is "Off" and sometimes that it is set to "Long-Edge Binding" -- but that seems to have no deleterious effect on duplex printing!
    Any suggestions / explanations for my problem / issue?
    Thanks much,
    Avi

    Other than using the CUPS interface, http://127.0.0.1:631,which it sounds like you've done, I don't think there is a way to edit the Default Settings. The standard approach is to create a preset, the solution you've found.
    For drag and drop printing, you should be able to get to the print dialog and select your preset or turn duplex on by holding the option key down, selecting the file, then doing the drag and drop (either to a printer or to an open printer proxy application).
    I realize this isn't a solution, but I hope it's helpful.

  • How do I change the default settings on ical

    how do I change the default settings on ical - I upgraded to Lion and now every event is automatically clicked as an "all day" and when I unclick the "all day" it gives me an 8 hour window for my event instead of the 1 hour that I prefer! Help!

    Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
    You can only assign one default application to one type of document.

  • Custom options in Adobe PDF printer are not showing up in "Default Settings"

    Hello,
    I am using Windows 7 and I am trying to create custom "Default Settings" in my Adobe PDF printer. When I make edits to an existing setting, click "Save As..." and save with a new filename, the new settings are not showing up in the "Default Settings" drop down box in the "Adobe PDF Settings" tab of the "Adobe PDF Document Properties" dialogue box. I can confirm that the new settings are indeed saved on my hard drive and are located in:
    C:\Users\[Username]\AppData\Roaming\Adobe\Adobe PDF\Settings
    No matter how many different custom settings I save as described above, they are simply now showing up. This works for me on other computers, but just happens not to work on my current one, which recently had an OS reinstall from scratch. Prior to the reinstall, it worked just fine on my computer (an ASUS UX31A laptop). The included pictures demonstrate what I'm talking about.
    Any thoughts?

    I finally solved this. The path for the Adobe PDF Settings was set to the follwing in the registry (HKEY_CURRENT_USER\Software\Adobe\PDF Settings):
        C:\Users\%USERNAME%\AppData\Roaming\Adobe\Adobe PDF\Settings\
    Even though "%USERNAME%" should work, it doesn't. I just replaced it with my actual username and it worked.

  • Purchase Order Default Settings

    Hi,
    I want to make 'S-Based IV' and 'GR-Bsd IV' as defaulted  settings for all Purchace Orders.
    Where can i configure the same in IMG.
    Please advise.
    Thanks in Advance,
    Safi

    Go to XK02, Select your Vendor and all....
    now go to Purchasing Data, Here you can set these Indicator.
    or in ME12, In Purchasing Data You can set the same.
    Then it will be defaulted to Purchase Order.

  • GL account given in Default Settings for Items is not taking precedence

    Hi All,
    Could you please give your valuable inputs for my query
    Which takes precedence....GL account given in Default Settings for Items at the top of the shop screen or the Product category and GL account assignment maintained in SRM GUI?
    Scenario: I input a GL account in 'Default Settings for Items' at the top of the shop screen. Then click on Describe Requirements. Here I change the Product Category and add the line item to shopping cart.
    What GL account will appear in the cost assignment? Default value maintained at the top or the value maintained in the Product category table.
    Thanks
    Deepthi....

    Hi Muthu,
    Thank you for your response.
    It is not picking the default G/L account assigned to cost center( I believe you are talking abt OKB9 trans). It is picking the G/L account which is assigned to the product category in the customising. This is happenning only if the product category is changed for the line item while adding the item to shopping cart. Otherwise the same G/L account given at the header is appearing in the line item too.
    Also While changing the G/L#  information in Default settings for items at top, if Cost center is also changed then the same cost center is appearing in the cost assignment section for the line item but not the G/L.
    Wanted to know if this is a standard design or not. I would like to have the header data to take precedence over the product category and G/L assignment. Any suggestions please
    No ..... I checked in csks table.There are many cost centers for the company code.
    Thanks
    Deepthi..

  • How do I change default settings in the author field when I edit or insert a comment in a PDF?

    How do I change default settings in the author field when I edit or insert a comment in a PDF?

    Generally it gets this info from the Identity in the preferences. Unfortunately, I know of no way to change the Login Name that shows up in the comments. I need to look at newer versions of Acrobat on other machines, this is AA8.

  • Anchored Objects Default Settings

    Hello,
    I'm having a problem with the default settings for anchored objects in InDesign CS5. I changed the default settings (to custom) while nothing was selected, but every time I try to anchor an object it autimatically reverts back to the original default settings (inline). I even closed all of my open documents and changed the default settings again (to custom). However, InDesign still places anchored objects as inline graphics and it's starting to cost me a lot of time, not to mention hair. Is this a bug or am I doing something wrong.
    Any insights on this issue would be greatly appreciated.
    Thank you,
    Jennifer

    Jennifer :•) wrote:
    That didn't change the defaults either. More importantly, how did you know that I'm working with gun photos?
    If you set the defaults in the Place Gun Frame (note that the object style name is case sensitive and must be spelled correctly), they should be applied to all images you place. You won't see anchored object options until the object is anchored, though, either by cut/paste or putting your cursor inthe text flow before placing.
    Do you mean photos of guns? If so, I had no idea. "Place Gun" is the official name for waht we normally refer to as the "loaded cursor" that you see whn you are placing an object.

Maybe you are looking for