Default settings with flash upgrades - Complaint

FINALLY - I've found probably the only way to complain to ADOBE - what an extrememly poor user experience YOU provide. As a supposedly professional company YOU should be ashamed of yourselves for making it difficult for YOUR CUSTOMERS to contact you. Not sure if you even read these let alone reply but I'm angry enough to have found my way here so I sure hope you do. The main complaint - HOW DARE YOU install an UPGRADE to a product and include default settings that change my preferences for other products? THIS IS TOTALLY UNACCEPTABLE. Sure you offer the option to untick a SMALL box at the very start, miss that and you're doomed but it should not be defaulted to accept. I expect this from a new install but definately NOT an upgrade, we've already decided our settings so honour them. Do you enjoy peeing your customers off in this way? I will never accept auto-updates from Adobe for this very reason - I DONT TRUST YOU!!

Doesn't sound like we're seeing the same thing. I can create a swatch at, say, green at 50% alpha. Then create a new square and fill it with a different color at different alpha, say 100% alpha. Then I can apply the swatch, and it's the expected saved color,  green at 50% alpha.  That's true that the alpha setting will be remembered between fill color selections, but the swatch for me is remembering the correct value.

Similar Messages

  • HT4528 Is there any way to get rid of the recent iphone upgrade and revert back to default settings? Since upgrading I have experienced nothing but problems with Siri.

    Since selecting the prompt to upgrade my iphone4s, I have experienced significant problems.  The "old" Siri disappeared and the new one is slow, ineffective and unavailable much too frequently.  The faded colors on my iphone screen are also troublesome.  I wish that I could revert back to the default settings
    on my iphone4s.  Has anyone else experienced the above problems?

    Apple does not support downgrading to a previous iOS.
    You might first try a reboot:
    press and hold the home and power buttons until the Apple icon is displayed, then let go.
    If it doesn't help,  try
    Settings>General>Reset>Reset all Settiings.

  • Adobe Flash Editor by default opens with Flash Professional CS4 when I have CS5 Installed ?

    How can I change with which Flash Professional to open the fla files in Flash Builder? My Fla files are saved as CS5 version, they open by default with CS5 when I double click them, but still Flash Builder tries to open them with CS4 ??? I couldn't find any simple switch setting for that, anyone ?
    Also is there a quick way to publish a specific fla file in Flash Builder which I want published just once not every time I save, or I have to open it in Flash Professional and publish it from there ?

    I'm not certain - I haven't done that. But I found this link...
    http://help.adobe.com/en_US/flash/cs/using/WSFD77A256-0DE1-46c7-86FB-CC4A8AE2EAA6.html
    Part way through the page, it mentions this:
    To perform testing or debugging in Flash Pro with a file you are editing in Flash Builder 4:
    From the Flash Builder development perspective, choose Run > Test Movie or Run > Debug Movie. Note that each menu item has a Flash Pro icon next to it. Once the SWF window or debug session is closed, focus will return to Flash Builder unless there are compiler errors in frame scripts inside the FLA file associated with the project. Information about all errors is sent to the Errors panel in Flash Builder.
    To publish the FLA file associated with the current project in Flash Builder:
    From the Flash Builder development perspective, choose Project > Publish Movie. Note the Flash Pro icon next to the menu command.
    Good luck!

  • Distiller 'default settings' blank and doesn't show all job options

    We're experiencing a problem with Adobe Distiller 9.3.0 being blank next to "Default Settings" with the error, "Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions: /CheckCompliance out of range".
    I can delete that joboptions file, which removes the error message, but the Default Settings pulldown menu still is blank and doesn't show all of the joboptions files that it should.  Only 2 of them are showing up in the pulldown.
    How can I fix this?
    I've tried deleting all joboptions files and letting Adobe self repair them and have tried deleting a few com.adobe.distiller* preference files and nothing yet seems to work.
    Thanks!

    I am connected to a network but we don't share applications. CS5 Design Premium is installed on my machine.
    See screenshot below:
    What is the relevance of this? We seem to have the same location for the output module file.
    Why does mine not work?
    See screenshot below:
    The Adobe Output Module is in my Startup Scripts but it still doesn't work.

  • My Firefox version is up to date, I restored Firefox to default settings, restarted, I downloaded latest version of Flash and it will not run, it crashes..

    Mac, OSX 10.6.8 (up to date), Firefox 28.0 (up to date). Adobe Flash was downloaded and no videos will run on any web pages using Firefox. I reset Firefox to default settings and restarted. I get the message that Adobe Flash has crashed. Shut computer down, rebooted. Same thing. Uninstalled Flash and the videos run but very choppy, jumping in 5 second increments after freezing. Firefox freezes and has to be force quit. Installed an older version of Flash and it will run, but I get a warning that it is vulnerable. I have gone through this several times and checked all my updates and they are the latest available. Videos do not run on the latest version of Safari either.

    Downgrade to FlashPlayer 12.
    I will add a link to a related post later. Flash 13 causes problems, and is a known issue with some older MAC s.

  • Change Flash Security Settings With No Internet Access?

    Hello
    I have firefox at home with no internet access, is it posible
    to alter my flash installation so it enables access to other
    content. it brings up a settings window but that just goes to a
    dead url.
    I have a a collage disk but it will not run untill I alter
    the settings of flash to allow acess to other site, other location?
    Please help?

    phil ashby wrote:
    > Glad it worked!
    >
    > Urami, I did some fairly extensive tests with this idea
    and it seemed to work
    > each time - although all our corporate machines have the
    same build. Even if
    > the directory didn't exist, if you created it and placed
    the SOL inside, it
    > words. In the end I never actually used it as I
    distributed the app as an exe
    > which doesn't have such draconian security requirements,
    also it obviously
    > overwrites the users original version, if present.
    I agree with you, I tried different SOL editor and it work
    when i tried.
    I believe what I used was more than SOL explorer/reader
    rather then editor
    even tho it has this option is seem the file stop working and
    hence the
    problem I was claiming about the files not work properly.
    Perhaps it was changing something and flash did not like
    these changes.
    Anyhow, I did try another tool and did manage to work.
    Thanks
    > Personally, I think it's a bit of a hole in the whole
    Flash security issue.
    Won't comment on that one :) Something just seem way
    unnecessary and silly...
    Best Regards
    Urami
    !!!!!!! Merry Christmas !!!!!!!
    Happy New Year
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

    After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

    Hey, I've got the same problem. Did you find any help or solution by now?

  • HT5858 I have had difficulty launching sites from within my email messages.  So, in trying to revert to the default settings on my iPad I went into "Settings" and reset everything.  Now, I have a black screen with a white apple and a white line!  What do

    For the last severl weeks I have had difficulty launching sites from within my email messages.  Thinking that I may have gone into "Settings" and set something wrong, I decided to reset to the default settings.  So, in "Settings" I chose reset everything.  Now, when I turn my iPad on all I get is a black screen with the picture of a white apple and a white line below it.  Nothing else works.  What can I do?  Do I need to send this back to Apple to be restored?

    You will hopefully be able to restore it yourself. It sounds like you erased all constant and settings rather than resetting all settings. But I'm basing my theory on the fact that you are seeing the Apple logo with the white progress bar (the white line) on the screen. That's what you would see if the software was being reinstalled and then it stopped on you. If that is what happened, you need to restore again and most likely need to use recovery mode.
    You can read about recovery mode here.
    Recovery mode - Apple
    However ...... If you are seeing the white line when you turn the iPad, let it go for twenty minutes or so, before you try restoring again. There is possibility that the software is still be installed and it can take a while before you see that white line move at all indicating that progress is being made.
    Frankly, I don't think that the software is still being installed, but since you didn't say specifically how long the iPad has been like this, it could just be that the software hasn't finished installing yet. If you know better - meaning that it's been like this for hours or longer, then you do need to restore the device.

  • Can you open an existing illustrator file with the application default settings?

    I need to open a customers illustrator files that he sends me with the default application settings, not the setting he saved with his file.

    CS6 (Mac) but soon CC.
    What is happening is they are saving the files with among other things, print scaling set to something other than 100%. If one of our operators does not catch it, the plate files are ripped at a smaller size than what they should be.
    This customer does thier own production work and sends us "plate ready" files but sometimes forgets to change this setting back to 100% (he changes the scaling to something that will fit on a letter size page so he can check his separations).
    I seem to recall (from years ago), there was a way to open a file using the applications default settings, not the settings saved within the file itself.

  • When i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ?

    when i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ? is this normal ???

    You probably have a filter set for the normal camera mode but not the square.
    To fix, in Photo mode, touch the filter icon (three circles) and select None for the filter.

  • When & how to use default settings option in job scheduling with BO 4.1

    Hi,
    With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on queries.
    Please guide me to, thanks in advance.
    Regards,
    Mithun Pati.

    Hi Mithun,
    Below thread may give you clear idea.
    The Purpose of the default settings is to have customized default settings for the enterprise. These settings would apply to any user who has access to Info view and wants to schedule a report. For example you can setup default values for "From" section of email so any scheduled reports use those settings. Similarly another setting we have defaulted is the number of retires involved and the seconds for each retry. Business Objects will not send out a failure emails unless the last retry has failed. The default settings should only be modified by an admin.
    Purpose of Default Settings when scheduling a WebI report?

  • SWFObject not playing MP3 in IE10 and lower with new Adobe Flash upgrade

    I am using SWFObject 1.5 with flash player 14.0.0.145 and SW flv player 3.x.x. My code used to work fine in all version of IE, FF and chrome earlier(Until i think we had flash 14.0.0.125), but after the recent upgrade its not working in IE 10 and lower while works fine in IE 11, FF and chrome.
    Any suggestion? Also any link to newer version of SW flv player would be helpful too.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html><head>
    <meta http-equiv="X-UA-Compatible" content="IE=8">
    <script type="text/javascript" src='js/swfobject.js'></script>
    </head><body bgcolor="#FFFFFF">
    <div id="audio_clip">You need to upgrade your Flash Player to at least version 8 to view this video content.<a id="1" href="http://www.adobe.com/flashplayer/">Download the latest version of Flash Player</a></div>
    <script type="text/javascript">
    // <![CDATA[
    var so = new SWFObject("js/flvplayer_updated.swf","flvplayer","592","342","8","#000000");
    so.addVariable("file", "<s:property value="audioUrl"/>");
    so.addVariable("autostart", "true");
    so.addVariable("screencolor", "#FFFFFF");
    so.write("audio_clip");
    // ]]>
    </script>
    </body></html>

    I'm not sure if your having the same problem I did, but my
    flash file was doing the same thing. It would play in one but not
    the other. It ended up being the fact that I had changed the file
    name but hadn't changed the name in the html.
    I can't remember which is which, but I think the embed tag is
    for IE and the object tag is for everything else. The file source
    must be exactly the same within both tags for fire fox and IE to
    play the file.
    I hope this helps and good luck.

  • Photoshop CS4 starts with the default settings.

    Hello,
    I have this strange issue with the Photoshop CS 4: sometimes, it opens with the default settings. Usually when working long periods of time e.g. the comp is on 24h and I use Photoshop all the time, the next day it opens with the default settings.
    This is quite annoying and I dont know what to do.
    Can anyone help?
    Thank  you!
    Alex

    Its resetting Photoshop's preferences, and this is a very unusual and quite worrying problem. Are you QUITTING photoshop, or is it crashing? You need to clean up your machine. Use this app…
    http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
    …it covers most of the territory. It will also do some kind of scan of your drive.

  • Firefox Freezed by Fullscreen Flash Video (and trouble with Flash Video Settings)

    I have a desktop computer with integrated nvidia graphics card and a notebook with integrated ati graphics card.
    Both use Linux with Firefox 3.0.8 with Flash Player 10.22
    If I use fullscreen in laptop(ati) no problem at all. In the desktop station(nvidia) if it is an embed video firefox freezes completely and I have to kill firefox. If I go to the original website of the video, no problem at all.
    Wanted to try to deactivate hardware acceleration as stated in some forums, but no luck. Both computers when I right click a select settings, window opens but I can't do nothing at all, not even close them. I can only close (normaly) firefox to reopen it.

    As it turns out, Skype also crashes if I try to use video - so I'm forced to confront the possibility that the problem is actually with my PC, or the updates windows has just installed.

Maybe you are looking for