Default site settings in iWeb

How do I change the name of the site I originally set up in iWeb? Everytime I update a page it has the wrong address programmed into it and I must manually enter the correct address. Is it in the "Domain" file?

How do I change the name of the site I originally set up in iWeb?
You just double click on the site name in the organizer at the left hand side of the iWeb page and change it to what you want. Or use the inspector. All this is in the Help -- search for "site name".

Similar Messages

How do I set the default site in iWeb '09

I have several sites built in iWeb, like most people do. However I want one specific site to be the default. How do I tell iWeb which folder to pick?
In addition to this question, I have iWeb on another computer that I would like to upload a site I've been working on too. However, I don't want the second computer to override the first.
It would be easier to show you...
my site is located here
- http://web.me.com/wlamagdeleine/
I want my default page to be located at...
- http://web.me.com/wlamagdeleine/Wayne
But I built a different page on a second Mac and I want to upload it as well, but not make it the default...
- http://web.me.com/wlamagdeleine/iwayne
How do I tell iWeb all of this?

If you have more than one domain file in different folders and want to open one of them in particular when you open the application, put a copy of its domain file into Home Folder/Library/Application Support/iWeb
When you enter the URL...
http://web.me.com/username/
... the site whose index.html file exists in Finder/Go/iDisk/My iDisk/Web/Sites opens.
When you upload the site - iwayne - its index.html file will replace the default. You need to keep a copy of the index file for the default site and upload it to Finder/Go/iDisk/My iDisk/Web/Sites by drag and drop after you publish changes to the site - iwayne.
To see the iwayne site in the browser you will enter the URL....
http://web.me.com/username/iwayne/PageName.html
... where iwayne is the name of the site in iWeb and PageName is the name of the Home page.

On announcing my site (1st time), iWeb encounters an error

On trying to announce my site (1st time), iWeb encounters an error while trying to locate my default email program.
Can anyone explain, please? Any advice very gratefully accepted.
annfromvic

Did you enter the email address in the publishing settings page? See this page for how to get there...
http://www.iwebformusicians.com/iWeb/Publish-Website.html

My Site Settings: Language Options not applied

On a SharePoint 2013 Server I want that the user be able to select is own My Site Language (as SP2010).
So, goingo to: Services Applications > User Profile Service > Setup My Sites:
And checking in the The Language Options checkbox (Allow user to choose the language of their personal site)
The above option doesn't result in any language selection prompt for the user on the My Site creation.
Ideas?

Hi falloutpt,
Based on the following article, user's My Site will be created with default, primary language of the SharePoint Server 2013 installation on the server by default, then user can change his my site to display other language installed, it should be different
from the SharePoint 2010.
http://technet.microsoft.com/en-us/library/cc262500.aspx#mui
"When enabled, users can use the multilingual user interface feature
for their My Sites. This feature is used to display the site's user interface in a secondary language that the user prefers instead of the default, primary language that was selected when the site was created.
By default, when a new site is created, it is created in the default, primary language of the SharePoint Server 2013 installation on the server. A farm administrator must install language packs on the server before sites can be created in languages
other than the default, primary language.
For My Sites, the multilingual user interface feature is controlled by the Language Options setting when you configure My Site settings. The languages that are available to users correspond to the language packs installed in the server
farm. For more information about language packs, see Install or uninstall language packs for SharePoint 2013."
Change and display language should also have changed in SharePoint 2013, user could display the My Site as other languages from IE language settings, which have being installed on SharePoint server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6bf98e09-854e-44e8-a606-4f37f37e2993/where-is-the-select-display-language-in-the-ui-of-sharepoint-2013-site?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support

Error trying to access Site Settings on sub-sites after migration from WSS 3.0 to Foundation 2010

I have migrated a WSS 3.0 database over to SP Foundation 2010. I can browse all the sites just fine. I can successfully get to Site Actions, Site Settings on the main site(parent). However, when I try to access Site Actions, Site Settings
from any of the subsites, I get the error below. It has been years since we setup the old WSS 3.0 site. I cannot remember what modifications may have been made that could help determine what is causing this. Thanks
Error
File Not Found.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 5096e4a9-5dc2-4fc0-b9bd-c8f758f8ed23
Date and Time: 9/5/2014 2:22:35 PM
In other words
this one works >> http://poly-2008-svr1/_layouts/settings.aspx
this one doesn't work >> http://poly-2008-svr1/11392/_layouts/settings.aspx

Hi Poly,
I recommend to check if the Alternate Access Mapping is correct for the web application where the site exists in Central Administration.
To narrow the issue scope, I recommend to create a new subsite to see if the issue still occurs.
Please also check the ULS log to get the detailed error message.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Access Denied Error while accessing "Site Settings Access requests and invitations"

Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, Pal

Hello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari

How do i edit a site created with iweb

I created a site last year with iweb, but now when I try to open it, it only lets me create a new site. I can see the thumbnail in my finder view, but cannot edit it. Help.
Thanks in advance

Try this:
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Why the dependency of "Site settings" for the "About me"-button in the top menu?

Hello, I recently had a customer case where the customer asked why certain users couldn't see the "About me"-button in the top personal actions menu, after they clicked at the user name/avatar. Only user details, "Sign out" and "My
settings" was visible for the user, who had an user license and a my site. There was also no customizations whatsoever in either javascript or css that could cause this, and the masterpage or the personal actions control doesn't seem to actually have
anything to do with the "About me"-button.
After some tracing and testing of Microsoft's code so we now know why the "About me" is not visible to all users. "About me" button depends on whether the "Site
Settings" is available in the menu or not. For the "Visitors" then there is no "Site Settings" because of their "Read"-permission level and thus does the "About me" button not appear in the menu.
In sposuitenav.js there is a loop for all ie:menuitem and inside of that there is these lines:
if(menuItem.id.indexOf("MenuItem_Settings") > 0) {
hasSiteSettingsMenuItem = true;
And a bit further down the code there is this:
if(!hasSiteSettingsMenuItem) {
a.AboutMeLink = null;
Which will cause so that the "About me"-link is null and is not rendered in the personal actions menu. Otherwise the AboutMeLink would have had the default value that is set by the code earlier.
So my question really, is why have Microsoft made the "About me"-button depending on whether or not the "Site settings" is visible for the user?
Because neither I nor my client can understand why there should be any relationship between Site Settings and the About Me link. Shouldn't anyone be able to go to their "my site"? As long as they have one, I can't see any reason to prohibit
anyone else than site administrators to see and use the "About me"-link.

It's a recent change it seems, people on the Office 365 Yammer network have noticed this as well. Microsoft has confirmed this as an issue and will work to fix it.
Join there if you haven't already :)
https://www.yammer.com/itpronetwork/#/Threads/show?threadId=466244664

Edit actual site name in iWeb

Sorry but I've searched this topic and can't find anthing relevant.
All I want to do is edite the Site name in iWeb. I have the Site Publishing Settings window up and set to Publish to Mobile Me with the side bar to the left. At the top of the sidebar it shows the name of my site. Say it is PlanetEarth and I want to edit to planetearth. If I try this the site name reverts as soon as I tab out of the field. Same with the Site name field in the Publishing (top) section of the window.
Help would be appreciated.

OK got it. Seems to work if I right-click and rename.

Runtime error with column default value settings

I have one SP2010 (enterprise) document library which gives me a runtime error if I click on "column default value settings" in the settings. Other document libraries' column default value settings are working fine. I use managed metadata
and created libraries from templates. I deleted all custom columns from the site, only title is left over (content types are document and link to a document) but runtime error still shows up. How can I fix this?
Server Error in '/' Application.
Description:
An application error occurred on the server. The current custom error
settings for this application prevent the details of the application error from
being viewed remotely (for security reasons). It could, however, be viewed by
browsers running on the local server machine.
Details: To enable
the details of this specific error message to be viewable on remote machines,
please create a <customErrors> tag within a "web.config" configuration
file located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to
"Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes:
The current error page you are seeing can be replaced by a custom error page by
modifying the "defaultRedirect" attribute of the application's
<customErrors> configuration tag to point to a custom error page
URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
Runtime Error

Thanks for your suggestions. I found the log but don't know what it means. Can anybody help?
System.ArgumentOutOfRangeException: startIndex cannot be larger than length of string. Parameter name: startIndex
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Microsoft.Office.DocumentManagement.MetadataNavigation.PerLocationViewManager.HumanReadablePath(SPList list, Guid fieldId, String uniqueNodeId, String pathDelimiter)
at Microsoft.Office.Server.WebControls.MetaDataNavTree.TreeViewDataBound(Object sender, EventArgs e)
at System.Web.UI.WebControls.BaseDataBoundControl.OnDataBound(EventArgs e)
at System.Web.UI.WebControls.HierarchicalDataBoundControl.PerformSelect()
at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.OnTreeViewLoad(SPTreeView spTreeView)
at Microsoft.Office.Server.WebControls.MetaDataNavTree.PerLocationPageLoad()
at Microsoft.Office.DocumentManagement.Pages.ColumnDefaultsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

How to Fix Forbidden 403 on Default Site?

I'm trying to get started with the Webserver on our new Mini Mac Server running Mountain Lion 10.8.2. After starting the webserver I tried adding a virtual host for phpmyadmin by moving the pma folder under /Library/Server/Web/Data/Sites and then creating a new site in the Server App and choosing that folder for the site. I set 'phpmyadmin' for domain name, the server's internal IP for IP address and random port (8700) for port number, hoping that I could access phpmyadmin at x.x.x.x:8700.
That didn't work, I got 403 Forbidden. Then, trying to access the server's default site, I got 403 Forbidden too. I hadn't touched the default site's settings or anything. So I removed the phpmyadmin from Sites. Still 403 on Default site. Shut down and restarted the webserver, same thing.
Finally I used sudo serveradmin command web:command=restoreFactorySettings to restore factory settings and restarted the webserver but to no avail.
So any ideas of how to get the Default site working again and how to create a new virtual host that I can access locally with IP:portnumber?

Under the sites list in Server for the Web service, you can double click the default site and you will see "Who can access". Have you verified this setting is "Everyone" or a group that you are a part of?
Also, have you verified the permissions in Finder/Terminal for /Library/Server/Web/Data/Sites? What are the permissions on the folders?

Problem Opening Site Files in iWeb 3.0.4

Having a problem opening different sites, I use seperate iWeb files for each site in one folder and now only one default site will appear when opening iWeb or trying to open any different site(file). I've done permissions and restarts but still no success. This just started the other day, I would appreciate any advice, thanks in advance.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
NOTE: If you repair disk permissions with Disk Utility on your boot drive you will have to rerun the script with Terminal to make the Library folder visible again.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Or you can download an already compiiled version with this link: iWeb Switch Domain.
OT

Dreamweaver 5.5 site settings

Hi, Till some time ago I've used fire ftp for managing files online. They are nicely opening in DW with a number in front of the files name. Then I decided to configure "site's" in DW built in manager. I've configured a remote server it's not working like I hoped.
1.When I open a file form remote server, it's not editable "on line". To do it I have to save that file and then PUT it on the server which is not very productive. Any way to overcome this?
2.How to switch of the prompt "do you want to override local files" and make "yes to all" permanent.
3.Do files edited on-line have any sort of indication that they are "on-line" and not local?
4.Is there any way to export Dreamweaver settings, mostly "sites" settings?

I don't know if it help's but I am using win7 64bit, DW 5.5 newest FF (but it worked also with older versions).
You could try "open with" (from the context menu)-> add program ->insert DW path -> connect to your server -> open with ->select dreamweaver ->edit.
I don't think it has something to do with the server (I am using linux, by the way).
I found this on FireFtp site, hope it helps:
For your local files, sometimes you want to be able to open a file with a different program than the default one. Let's say I have an image file - sometimes I just want to look at it and that defaults to Firefox (what else?!) but sometimes I want to edit it and for that I need Photoshop.
So, I right click on my image file, go to Open With->Add Programs... The associated extension with the file (in this example, ".jpg") will already by listed on the top-left pane. I give my program a name in the Name textbox, in this case, Photoshop. I click "Browse" and find the Photoshop executable file (on Windows, this is usually under the "Program Files" folder somewhere). And optionally I can add Arguments, but for most users and most cases it's enough to leave that box alone. Then I hit "Apply". I'll then see in the top-right pane that my program is now associated with that extension. In a similar manner, if I want a program to be associated with all extensions and all files I can select "*.*" (which will always be there) and add programs to its list.
Now, when I right click the file again and look under "Open With", I will have Photoshop as one of the options - I can select that and the file will open up with Photoshop.
For remote files, selecting Open With will download the file and put you into Remote Edit mode. From here you can work on your file, save it, and FireFTP will automatically upload your file when it detects you've modified the file.
For Mac users: When you create a program entry for Safari, for example, you would think the path to the Application is probably: /Applications/Safari.app
and logically so, because when you browse the directory you aren't allowed to go into the Application's hidden contents. However, this is not the correct path. Right-click on an Application and do "Show Package Contents". The correct path to the Safari application is actually: /Applications/Safari.app/Contents/MacOS/Safari
Not very intuitive, I realize, for you Mac users out there. Maybe in a future version there will be an easier way to access these hidden Application contents.
Message was edited by: blackflow

Cant log into R12 default site after installation !!!

Hi all,
I have installed R12 on windows 2003, the post installation was successful and i was able to see the test site but it was couldnt log into it because of java error.
Then i restarted and now i cant get into it default site any more. Try to restart the apache service but i couldnt find it.
I am able to ping both the host and the fQdN without any problem
Below is the log file:
Database ORACLE_HOME environment file passes instantiated variables test:
File = c:\oracle\VIS\db\tech_st\11.1.0\VIS_r12.env
Apps ORACLE_HOME environment file passes instantiated variables test:
File = c:\oracle\VIS\inst\apps\VIS_r12\ora\10.1.3\VIS_r12.cmd
iAS ORACLE_HOME environment file passes instantiated variables test:
File = c:\oracle\VIS\inst\apps\VIS_r12\ora\10.1.2\VIS_r12.cmd
APPL_TOP environment file passes instantiated variables test:
File = c:\oracle\VIS\apps\apps_st\appl\VIS_r12.cmd
ADOVARS environment file passes instantiated variables test:
File = c:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
APPSCONFIG passes instantiated variables test:
File = c:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
DBC File
DBC file passes instantiated variables test:
File = c:\oracle\VIS\inst\apps\VIS_r12\appl\fnd\12.0.0\secure\VIS.dbc
HTTP
checking URL = http://r12.jibosit:8000
HTTP Listener is responding
Help Page
checking URL = http://r12.jibosit:8000/OA_HTML/help
Page is responding
Virtual Directory
checking URL = http://r12.jibosit:8000/OA_MEDIA/FNDLOGOL.gif
Page is responding
checking URL = http://r12.jibosit:8000/OA_JAVA/oracle/apps/fnd/admin/server/server.xml
Page is responding
checking URL = http://r12.jibosit:8000/OA_CGI/FNDWRR.exe
Page is responding
JSP
checking URL = http://r12.jibosit:8000/OA_HTML/jtfTestCookie.jsp
JSP is responding
Login Page
checking URL = http://r12.jibosit:8000/OA_HTML/AppsLogin
Page is responding
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
Launching browser - rundll32 url.dll,FileProtocolHandler http://r12.jibosit:8000
Any suggestion please let's know.
cheers

Starting AutoConfig at Sun Feb 21 07:40:30 2010
Using adconfig.pl version 120.26
script returned:
adexecsql.pl started at Sun, 02 Feb 2010 07:59:41 GMT Standard Time
The environment settings are as follows ...
ORACLE_HOME : c:\oracle\VIS\apps\tech_st\10.1.2
LOCAL : VIS
PATH : c:\oracle\VIS\apps\tech_st\10.1.2\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;%PATH%;c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe;c:\oracle\VIS\apps\tech_st\10.1.2\bin;c:\oracle\VIS\apps\tech_st\10.1.2\jdk\jre\bin\classic;c:\oracle\VIS\apps\tech_st\10.1.2\jdk\jre\bin;c:\oracle\VIS\apps\tech_st\10.1.2\jlib;c:\oracle\VIS\apps\tech_st\10.1.3\bin;c:\oracle\VIS\db\tech_st\11.1.0\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\cygwin\bin;
TNS_ADMIN : c:\oracle\VIS\inst\apps\VIS_r12\ora\10.1.2\network\admin
Running SQL script : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\fteadmprf.sql
SQL*Plus: Release 10.1.0.5.0 - Production on Sun Feb 21 07:59:41 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: ERROR:
ORA-12541: TNS:no listener
Error encountered while running c:\oracle\VIS\inst\apps\VIS_r12\admin\install\fteadmprf.sql
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\ont\12.0.0\admin\driver\onttmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for ONT_TOP
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\ar\12.0.0\admin\driver\artmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AR_TOP
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\ahl\12.0.0\admin\driver\ahltmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for AHL_TOP
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\ozf\12.0.0\admin\driver\ozftmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for OZF_TOP
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\ies\12.0.0\admin\driver\iestmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IES_TOP
instantiate file:
source : c:\oracle\VIS\apps\apps_st\appl\ies\12.0.0\admin\template\cooper.cmd
dest : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\cooper.cmd
backup : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\cooper.cmd to c:\oracle\VIS\inst\apps\VIS_r12\admin\out\02210740\cooper.cmd
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\csd\12.0.0\admin\driver\csdtmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for CSD_TOP
Processing DriverFile = c:\oracle\VIS\apps\apps_st\appl\igc\12.0.0\admin\driver\igctmpl.drv
AutoConfig Profile Phase
Running Instantiation Drivers for IGC_TOP
instantiate file:
source : c:\oracle\VIS\apps\apps_st\appl\igc\12.0.0\admin\template\igccmprf.sql
dest : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\igccmprf.sql
backup : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\igccmprf.sql to c:\oracle\VIS\inst\apps\VIS_r12\admin\out\02210740\igccmprf.sql
setting permissions: 600
instantiate file:
source : c:\oracle\VIS\apps\apps_st\appl\igc\12.0.0\admin\template\igccmprf.cmd
dest : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\igccmprf.cmd
backup : c:\oracle\VIS\inst\apps\VIS_r12\admin\install\igccmprf.cmd to c:\oracle\VIS\inst\apps\VIS_r12\admin\out\02210740\igccmprf.cmd
AutoConfig Profile Phase
Running Profile Process 1 of 1 for IGC_TOP
Executing script in InstantiateFile:
c:\oracle\VIS\inst\apps\VIS_r12\admin\install\igccmprf.cmd
script returned:
21/02/2010
07:59
Enter the Username/Password: ECHO is off.
ECHO is off.
21/02/2010 07:59
ECHO is off.
ECHO is off.
Setting environment for using Microsoft Visual Studio 2008 x86 tools.
APPSORA.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : c:\oracle\VIS\apps\tech_st\10.1.2
ORACLE_SID :
TWO_TASK : VIS
PATH : C:\V98\Common7\IDE;C:\V98\VC\BIN;C:\V98\Common7\Tools;C:\WINDOWS\Microsoft.NET\Framework\v3.5;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\V98\VC\VCPackages;C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin;c:\oracle\VIS\apps\apps_st\appl\au\12.0.0\bin;c:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\bin;c:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\;c:\oracle\VIS\apps\apps_st\comn\util\unzip\unzip;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;c:\oracle\VIS\apps\tech_st\10.1.2\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\cygwin\bin;C:\WINDOWS;C:\WINDOWS\system32;c:\oracle\VIS\apps\tech_st\10.1.3\ant\bin
LD_LIBRARY_PATH : c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\lib;c:\oracle\VIS\apps\tech_st\10.1.2\lib;c:\oracle\VIS\apps\apps_st\appl\cz\12.0.0\bin;c:\oracle\VIS\apps\tech_st\10.1.2\lib
ECHO is off.
ECHO is off.
Running SQL script
ECHO is off.
SQL*Plus: Release 10.1.0.5.0 - Production on Sun Feb 21 07:59:47 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Error returned while running igccmprf.cmd
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
Product Top Drivers executed : AD_TOP FND_TOP ICX_TOP MSC_TOP IEO_TOP BIS_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL_TOP OKS_TOP CSF_TOP IGS_TOP IBY_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP FTE_TOP ONT_TOP AR_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP
===========================================================================
Starting Restore Profile utility at Sun Feb 21 07:59:49 GMT 2010
Using version 120.4
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : r12
sDbDomain : jibosit
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@r12.jibosit:1521:VIS
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=r12.jibosit)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=r12.jibosit)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS.jibosit)))
Exception occurred: java.sql.SQLException: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Verifying connection to the Database : Could not be stablished
No Restore Profile file created.
Restore Profile utility ran successfully
===========================================================================
adcvmlog.xml renamed to c:\oracle\VIS\inst\apps\VIS_r12\admin\log\02210740\adcvmlog.xml.02210759
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\oracle\VIS\inst\apps\VIS_r12\admin\install
adgendbc.cmd INSTE8_SETUP 1
afcpnode.cmd INSTE8_SETUP 1
afgcsreg.cmd INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I c:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I c:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread c:\oracle\VIS\inst\apps\VIS_r12\admin\scripts\adexecsql.pl sqlfile=c:\oracle\VIS\inst\apps\VIS_r12\admin\install
afwebprf.sql INSTE8_PRF 1
amscmprf.sql INSTE8_PRF 1
amswebprf.sql INSTE8_PRF 1
bisadmprf.sql INSTE8_PRF 1
bisdblrp.sql INSTE8_PRF 1
clnadmprf.sql INSTE8_PRF 1
cncmprf.sql INSTE8_PRF 1
cseadmprf.sql INSTE8_PRF 1
csfadmprf.sql INSTE8_PRF 1
csiadmprf.sql INSTE8_PRF 1
eamadmprf.sql INSTE8_PRF 1
fteadmprf.sql INSTE8_PRF 1
ibywebprf.sql INSTE8_PRF 1
icxwebprf.sql INSTE8_PRF 1
oksfrmprf.sql INSTE8_PRF 1
wshadmprf.sql INSTE8_PRF 1
Directory: c:\oracle\VIS\inst\apps\VIS_r12\admin\install
adadmprf.cmd INSTE8_PRF 1
afadmprf.cmd INSTE8_PRF 1
afcpctx.cmd INSTE8_PRF 1
afcpgsm.cmd INSTE8_PRF 1
igccmprf.cmd INSTE8_PRF 1
jtfictx.cmd INSTE8_PRF 1
okladmprf.cmd INSTE8_PRF 1
txkJavaMailerCfg.cmd INSTE8_PRF 1
txkWebServicescfg.cmd INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I c:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I c:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I c:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread c:\oracle\VIS\inst\apps\VIS_r12\admin\install
adadmat.pl INSTE8_APPLY 1
AutoConfig is exiting with status 29
This is the last paragraph of the error code as i cant display all because of the restriction, i really dont understand what going on though. My guess is there is a problem with some java script not applying properly.
But i will welcome any suggestion or possible solutions.
Thanks

I can't find my web-site in my iweb

I created a web-site in 2008 and want to revise it. When I open iWeb, it is not there. WHen I type in the www. address, it's there. How do I get it back and work with it?

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Or you can download an already compiiled version with this link: iWeb Switch Domain.
OT

Default site settings in iWeb

Similar Messages

Maybe you are looking for