Default size for MicroPhoto wallpape

When I got my MicroPhoto it came with some wallpapers.. I deleted them because I wasnt going to use them. Does anyone know what size they are in pixels? I want to make my own wallpapers.

Do a search to see what the resolution size is on the MicroPhoto.
I may be wrong, but I dont think you need to have a picture a certain size in order to use it as a wallpaper.

Similar Messages

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

Does anyone know the default size for 24 in. imac display?

I inadverently changed the display size on my 24 inch imac. The font in the toolbar at the top of the desktop is larger than I want. Also, when I open windows in different applications, they open larger than the display and have to be downsized in order to see the entire window.
Does anyone know the default size for this display? Or is there a different way to fix my issues?
thanks in advance.

Hi Napamike2: The default setting for the 24" is 1920X1200. If that doesn't get you back to the proper display, maybe you have accidentally activated "Zoom". To check go to System Preferences, Universal Access. Check that Zoom is turned off.
Stedman

How to set default size for published SWF in Catalyst CS5.5

I create a 800*600 pixel project in Catalyst CS5.5 and published it as .swf.
But when I opened the published .swf, the default size is smaller than 800*600. I have to resize it by myself.
So is there any method that I can set the default size for published .swf?
Thank you guys! Best regards.
Nick

When you start new Flash Catalyst project, you have the option to enable resizing
This setting is enabled by default.
If you need to change this later, you can go into Modify > Artboard settings.
Now when you publish your project, the width and height will be used instead.
As to manually editting the HTML file, there are 3 tag sets that define the width and height of the project (to handle various browsers). You will need to adjust the values in each of those tag sets. You should only need to do this if you can't republish the file.
Chris

How can I permanently enlarge the default size for pop-ups?

I use several sites that employ pop-ups. The default size is too small, so I have to manually enlarge each pop-up. How can I set the default size for pop-ups to a larger size. I don't want them maximized, just larger than the default.

A pop-up should fit normally unless you are zooming images or text or increasing elements otherwise.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Is there any default size for ArrayList

The default capacity of Vector is 10.
Is there any default size for ArrayList ??
Vector v = new Vector();
System.out.println("==> "+v.capacity()); // output is ==> 10
java.util.List alist = new ArrayList();
System.out.println("==> "+v.capacity()); // here the out put is ==> 0
Regards
Dhinesh

No default size for arraylist.initially it's zero.
I think u r comparing capacity with a size those two are different.
Size- represents number of elements in the array.
capacity- the capacity is the size of the array used to store the elements in the list. It is always at least as large as the list size. As elements are added to an ArrayList, its capacity grows automatically.
it depends on the ensureCapacity() method in the arraylist.

Default size for logo in 8.8

What is the default size for a logo(picture) in 8.8 (on SBO print layout)?

In a PLD, you can drag a Picture Box, and assign an image to the picture. Now in the Properties Window -> Format Tab -> Picture Size, set this to 'Fit Field Size Non-Proportionally'.
This setting will adjust the size of the image to the size of the Picture Box, that is placed in the PLD.

How to set default size for .chm window?

I know there is an answer at grainge.org, but it seems to be
referring only to a .chm using skins, which I am not.
Anybody know how to make the default size of the .chm larger?
thanks, Leisa

Lacona,
The default window size is set in your windows properties
dialog in RoboHelp. It can also be set manually in the .hhp file
before you compile. If you open the .hhp file in a text editor,
such as Notepad, you will see a [WINDOWS] section and for each
window defined there will be a series of numbers. One of these is a
vector [in square brackets] that defines the original position.
These are absolute screen pixels.
In older versions of RoboHelp, one of which I use, there was
a limit to the size of the window RH would allow but when I changed
the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
Windows properties dialog. I'm not sure how the latest versions
handle this but you might try editing the .hhp with Notepad and
then compiling the .chm.
John

Setting default size for the information area in the main window

Hi, I wonder if there is any way to change the default size of the information area in the main window (lower left corner). I want it a little bigger because I had some useful information set there and I had to change the size every time I log in.
Thanks in advance.

That part of the interface doesn't have an exposed preference to control.
One thing you could do is reorder your metadata fields within the info pane so the most important are listed first and always visible.

Set the default size for all archive mailboxes including the ones it will be created in the future

Hi there.
We are in the phase where we Will enable Online Archive for all the users.
We see that the default Archiving Quota is set up for 50 GB. We have found this powershell command on MsTechnet forum
Get-Mailbox -resultsize unlimited | where {$_.ArchiveDatabase -ne $null} | set-mailbox -ArchiveQuota 7GB -ArchiveWarningQuota 6GB
which I guess it will set up the ArchiveQuota to 7GB to all the users, true?
The question is if this command will work only for those users who currently have archiving enabled or it Will also work for those users which we are planing to enable archiving in the future?
The idea is that everyone would not have 50GB by default and this should be a default value also for those who currently do not have archiving enabled.
with best regards,
bostjanc

Hi there.
I don't quite get it.
I have created "for example" a database called: STH ARCHIVE.
Then if I take look on properties of this database this is how it's shown:
And now here comes the "tricky part" which is a little bit odd to me.
I have enabled archive on my mailbox and selected this STH ARCHIVE DB to hold this archive mailbox.
Then I have manually ran ManagedFolderAssistant for my account: Start-ManagedFolderAssistant -Identity "my-email-address"
And after I have greped the size of my mailbox:
Get-Mailbox | Get-MailboxStatistics -Archive | Sort totalitemsize -desc | ft displayname,totalitemsize, itemcount >C:\report-archive-database-mailboxes.txt
And get the result:
Personal Archive - MYUSERNAME
TotalItemSize: 4.071 GB (4,371,586,689 bytes)
ItemCount: 55227
So now I don't understand how I was able to go thru that sizes which are in the upper print screen of archive DB properties?
bostjanc

Image size for playbook wallpaper

What is the image size supposed to be for the wallpapers on the playbook?
I have been tinkering with wallpapers, and read where the image needs to be 1024x600. I have tried files of this size and the playbook cuts off the edges.
I have ended up creating images that are originally 1024x600 and then just expanding the canvas to 1300x1300 to get the image to look correctly. And these only work in landscape. It is a whole different ball game in portrait,
I was able to get 1 image to work both landscape and potrait, but that was a simple circular logo originally scaled to 1024x600, then the canvas opened to 1250x1250. That one worked descently.
Also, an idea for RIM, allow different wallpapers in landscape and potrait. This way we can have an image that sits like we want it so we can see what we want. Just an idea. Thank you.
- When life hands you lemons, find someone with a paper cut.
Solved!
Go to Solution.

Hope this helps out with everything.
http://www.playbookdaily.com/2011/04/25/blackberry-playbook-wallpaper-size-explained/
Playbookdaily.com
BlackBerrySites.com

Change default size for Spotlight window

Hit +space, type query, click "Show All".
Window you get always small and narrow - needs adjusting all the time.
Even more insulting - it's not reacting on 'Zoom' menu command or 'green button'.
The only way is to drag it's corner.
What I'm looking for:
change it's default prefs, so I'd always start with a bigger window, which I only seldom need to adjust.
P.S. there is a very similar topic http://discussions.apple.com/thread.jspa?threadID=1729859, but they lost their way and never addressed this issue.

Start with http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure. Whether either of those address your specific problem, I'm not sure, but should get you going in the right direction. Do note that I favor CMD+F over CMD+spacebar.

How do I set the default size of a new folder?

I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

Web pages come out tiny, I must use control + to view every page. How can I set a defult size for every page I vivit?

After upgrading to 3.6 all the web pages come out tiny. The text and the pictures. I must use the Ctrl + in order to make the web page fill my screen. What do I have to do to set a default size for every web site I visit?

■ Easiest method, if you allow firefox to tabs you used then on restarting I believe it also retains the zoom settings
* '''Tools -> Options -> General -> Startup = use current pages'''
■ There are also extensions that can be used, some allow individual sites to have individual settings. Look at the [http://support.mozilla.com/en-US/questions/772884 this thread] which also discusses related matters.
■ The best method if you need the same effest accross all sites is probably changing one of the preferences within the config files, it is discussed in the above linked thread and also in this MozzillaZine article http://kb.mozillazine.org/Layout.css.dpi

Hi! Question about setting default size when opening existing PDF's.

The pdf documents i download all seem to open up at 202% size. Is there a way to set my default size (for opening and reading documents) to something smaller, so I don't have to always use the magnifying tool to shrink them? Thanks!

Under Preferences | Page Display, set Zoom to 100% or whatever you would like to open it with.

Default size for MicroPhoto wallpape

Similar Messages

Maybe you are looking for