Default State will not reset in Catalyst!!!!

hi,
i have a project i have finished and i have set a new default page, but every time
i open the project it starts on my previous default page.
i have looked for some conflicting interaction but cant see any.
any help??
found this, but still didnt help me, but same problem......
http://forums.adobe.com/thread/702610?tstart=1

Toggled the MLPP settings on the phone to make it work.

Similar Messages

  • Ipod will not reset

    my ipod will not reset i've held donw the menu and select buttons to get the apple logo however it does not reset it states for me to go to the web site for support www.apple.com/support/ipod. Also, it does not recognized the ipod on the computer when connected. any suggestions

    My ipod mini fell too the other day in school. I picked it up and the screen was blank. I've tried to reset it and I've hooked it up to the computer. Itunes wont come up and it has the battery icon less than half full. But when I charge my ipod to the wall or on my radio, press the button down for 10-15 seconds, the screen lights up and it works normally. I just got it fixed almost year ago when this exact thing happened, and i the warrenty is done. so someone please reply this with the solution. i don't feel like buying a new ipod, i rather just pay 70 dollars to send it in and get it fixed.

  • Airport Extreme will not reset

    I have bought a used Airport Extreme Base Station (no model name on the unit). It has the former users network settings and passwords.
    It will not perform a hard reset (press reset button while powering on). Still shows old network name, and ask for a password.
    I have an iMac 27 running Yosemite with latest updates.
    Please help!

    OK, thanks for the information.
    Before we go too far here with things, you should be aware that the AirPort Extreme is at least 3 years old and as much as 5 years depending on when it was manufactured.
    The life of an AirPort router is on average, about 3 years. Some last longer, some don't.
    The fact that the AirPort will not reset when you try a Hard Reset is not encouraging.
    Try a Factory Default Reset to see if that will return things back to where they need to be:
    Power off the AirPort Extreme
    Wait a minute or two
    Hold in the reset button first, and keep holding it for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button after the hold period, and allow a full minute for the AirPort to restart to a slow, blinking amber light
    If the AirPort Extreme is functioning correctly, it is now reset back to factory fresh settings.
    If you try the Factory Default Reset a few times and the AirPort will still not reset correctly, then you have a defective AirPort Extreme that should be returned for a refund.

  • Time Capsule will not reset

    I'm trying to delete old user devices from my access control list, but after I remove them, the Time Capsule will not reset properly.  After I delete one of the devices, click on Update, the time capsule gets stuck during the update and never fully resets.  If I pull the plug and restart the time capsule, it reverts back to it's previous state with the devices still in the access list.  Is anyone having this trouble?

    Dear Stephen,
    I have the same problem and I found this thread describing the same thing on another forum. Each time I try to change any setting this happens (i.e., TC won't reset and I have to unplug it before I can use it again).
    When the postings in the mentioned thread are any indication no reset (hard or soft) will have any lasting effect. But of course, I will try to reconfigure and see what happens.
    Any solution or localization of where the source of the problem (firm-/soft-/ or hardware) would be highly appreciated:)
    Best
    Rene

  • Time Capsule will not reset - just flashes yellow

    I have a 2 TB Time Capsule that will not reset - it just flashes yellow.
    I have tried all the various reset options, left the unit uplugged overnight and all I get is a blinking yellow light.
    Via airport the only option that I see is to set up a wireless network, there is no configuration window for the time capsule. I am not using this a wireless device, I have a comcast modem for that. It is being used for backup only.
    When I select time machine under system settings, I can see the drive. I can select it but it will not accept the password. I have verified that I am using the correct password from the keychains utility.
    I don't know if this is related, but I named the capsule TMBackUp and it shows that name in disk selection list, but when I select to use it for backups and it asks for the password (which does not work) it says, Enter your password for the server "Time Capsule d629db" so that Time Machine can access it. I don't know if the name differenc is even relevant, but thought I should mention it.
    I really suspect that it has something to do with the ip address. Up until recently I have had ip addresses that were similar to 192.x.x.x, now I have ip addresses that are similar to 10.0.0.x. I just resolved an issue that this ip change was causing with two tivo units. So I assume the issue with the time capsule is something similar. My problem is that I see no interface with the time capsule to check the ip address that it has been assigned.
    I am willing to wipe everything to start over, I just can't figure out how to get there.
    I would appreciate any help that anyone can offer.
    Thank you.

    I have a 2 TB Time Capsule that will not reset - it just flashes yellow.
    The Time Capsule will flash amber when it has been reset. This is normal. A reset takes the Time Capsule back to its original factory default settings.
    This is what you have done.
    You will need to set up the Time Capsule again just like you did when you originally installed it on your network.
    You can use the same name for the Time Capsule and passwords that you used previously, if you wish.
    You do not need to "wipe" the Time Capsule hard drive. Your backups will continue from their previous point once you have the Time Capsule reconfigured to operate on your network.

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

    By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
    Thanks
    Jacky

    Hi,
    If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Insert statement will not work if select statement has less number of colum

    Hi,
    One of my thread is already resolved on the following URL : unable to insert rows into the table
    DROP TABLE TEMP;
    CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
    DECLARE
    S VARCHAR2(200);
    STMT VARCHAR2(500);
    begin
    for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
    STMT := 'INSERT INTO TEMP SELECT * FROM ';
    STMT:=STMT || C.TABLE_NAME;
    EXECUTE IMMEDIATE STMT;
    dbms_output.put_line(c.table_name);
    end loop;
    end;
    i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
    Please let me know , how can i execute proper way.
    Thanks.
    Best Regards
    Arshad

    user13360241 wrote:
    Hi,
    One of my thread is already resolved on the following URL : unable to insert rows into the table
    DROP TABLE TEMP;
    CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
    DECLARE
    S VARCHAR2(200);
    STMT VARCHAR2(500);
    begin
    for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
    STMT := 'INSERT INTO TEMP SELECT * FROM ';
    STMT:=STMT || C.TABLE_NAME;
    EXECUTE IMMEDIATE STMT;
    dbms_output.put_line(c.table_name);
    end loop;
    end;
    i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
    Please let me know , how can i execute proper way.
    Thanks.
    Best Regards
    Arshadmore often than not "TEMP" tables are NOT required & are highly inefficient in Oracle.
    Either only specify explicit column in TEMP to get data,
    or provide value for "extra" column in TEMP

  • Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

    Ipod Touch 4th generation 32G not turning on, not charging.
    I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
    It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
    Holding home and power button will not reset.
    Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
    NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
    My Itunes is up to date, as is my OS.
    All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

    See if you missed anything here:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

    ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and  it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • I have forgotten my passcode and it says I have to connect to iTunes to reset but when I connect it to iTunes it will not reset the phone to factory settings please help

    I Have forgotten my passcode and I have connected it to iTunes to factory reset but will not reset it please help

    Hi ..
    Follow the instructions here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • Nano 5th Gen will NOT reset or connect to iTunes

    I've tried the usual toggling of the hold button followed by the menu/select button on this Nano, which has worked on other models that I own. This Nano will not reset and isn't recognized when plugged into iTunes. Just the black screen no matter what. Out of warranty, so any suggestions other than taking to Apple would be greatly appreciated!

    If none of the suggestions mentioned in the iPod Nano 5th Gen. User Manual and on the iTunes & iPod Hints & Tips website, you should take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you. If you have Apple Care, take advantage of it by calling them.

  • ODBC connection to Oracle 7 will not reset

    We are using Oracle JDBC drivers for all but one of our
    datasources which is an old Oracle 7 database. The ODBC connection
    to this database will not reset when the database is bounced or the
    database server is rebooted. We have to restart the ODBC service to
    reset the connection. Is there another way to do this automatically
    or perhaps another driver out there we can use? We are running
    ColdFusion MX 6.1 Enterprise.

    Wow, I can't believe that you are still using Oracle 7. In
    fact, unless you are on 7.3.4 you aren’t even Y2K compliant.
    Of course, I'm not even sure if there is an upgrade path from 7.x
    to 10g, but I would consider migrating off of 7 to anything else.
    Otherwise, you are going to have more and more compatibility
    problems. In fact, you can no longer even get ODBC drivers from
    Oracle for versions older than 9i.
    Good luck.
    Phil

  • My Wells Fargo bank statement will not open in Firefox. I have to use Safari. Please fix and let me know the reason.

    My Wells Fargo bank statements will not open in a viewable format.

    Here is a link to Wells Fargo "Online Statements Questions": https://www.wellsfargo.com/help/faqs/statement_faqs
    *click on the item "How can I view or get copies of my Online Statements?"
    *scroll down to "Viewing Online Statements"
    *it says:
    **You need Adobe® Reader® to view, print, or save your statement. If you do not have it, you can download Adobe Reader for free.
    I do not see a PDF Reader plugin in the list of plugins submitted with your question.
    *See Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Maybe you are looking for