Default Stereo Preset

When I put my video into the timeline, only one track has a source button, and only one sound track.
When I go to the User Preference, the Default Stereo Preset only has a total output of 2, but has 0 mono Outputs and 1 Stereo Output.
How do I get two Source Buttons on the audio tracks? Do I have to change the Stereo Preset?
Any suggestions?
Hank Kearns

Well this is all odd - the stereo preset is for
output not in...
You're capturing this material from DV which has two
tracks recorded? can you see meters or something in
the log and capture window or on the camera's on
screen display that show both tracks are recording?
are you using a single mic or stereo mic?
////No way of telling. My camera is not a professional model, it is a Canon ZR500.
You are using the DV NTSC capture preset right?
///Yes, that is the setting in the Audio/Video Settings.
the
one that's locked? if so, trash your preferences and
try another capture.
///I trashed my preferences, and will attempt another capture when I get home later tonight.
Even if you've only recorded on
one track (possible for sure) you should still get a
two track capture with one of them containing no
audio...
// This is frustrating. Thanks for taking the time to respond.
Hnak

Similar Messages

  • How do I change the default settings in a printer's Default Settings Preset?

    I am running Mavericks, printing to an HP LaserJet 4050N via IP.  [The following behavior takes place whether the printer's internal settings are set to Duplex Printing is On or is Off.]
    I would like to set the default to print duplex, whether I am in an application or 'drag and drop' a file onto the printer icon (which temporarily opens the application, prints the document, and quits).
    I do not seem to be able to modify the "Default Settings" Preset to specify duplex printing.  However, I have been able to create a new "Default Settings-1" Preset that specifies duplex printing.  By selecting the "Default Settings-1" Preset, in any application, I get duplex printing without any problem.
    First -- problem:
    If I drag-and-drop a file -- e.g., .pdf or .docx -- onto the printer icon, it opens the application and uses the "Default Settings" Preset -- not the "Default Settings-1" Preset -- and prints single-sided.  How do I get drag and drop to use the "Default Settings-1" Preset to get duplex printing?
    Second -- issue:
    Bizarrely, if I am in an application, select "Show Presets", select "Default Settings-1" and click on "Layout", it sometimes shows that "Two-Sided" printing is "Off" and sometimes that it is set to "Long-Edge Binding" -- but that seems to have no deleterious effect on duplex printing!
    Any suggestions / explanations for my problem / issue?
    Thanks much,
    Avi

    Other than using the CUPS interface, http://127.0.0.1:631,which it sounds like you've done, I don't think there is a way to edit the Default Settings. The standard approach is to create a preset, the solution you've found.
    For drag and drop printing, you should be able to get to the print dialog and select your preset or turn duplex on by holding the option key down, selecting the file, then doing the drag and drop (either to a printer or to an open printer proxy application).
    I realize this isn't a solution, but I hope it's helpful.

  • Stereo preset for 3D Objects

    The stereo preset for 3d objects does not really work very well with the glasses I have. I am using the shrek glasses which I thought were blue and red, but they may be cyan and red.
    Is there a way to change the preset colors for this property or anywhere I can download other stereoscopic render settings?

    These are built-in features that cannot be edited. However, you shoulkd be able to tweak the exact spectrum of the colors with a simple adjustment.
    Mylenium

  • IDCS2 default pdf presets do not appear and cannot be loaded

    after upgrading to cs2 the default pdf presets in indesign and illustrator do not appear. the job options files are in the correct folder: library/application support/adobe/adobe pdf/settings, but the dial icon does not appear (it's a gray box instead).
    i am also not able to make new presets or load any presets. i get the error message "cannot create the file. the folder may be write protected" or "cannot import presets from this file".
    i have uninstalled and reinstalled cs2 and acrobat 8 several times to no avail. i've also repaired permissions.
    i have tried the adobe phone support, and they suggest it is my operating system?
    any ideas?
    Power book G4 17" osx 10.4.10

    I noticed this being a problem under Leopard and the update for 8.1.2 of Acrobat Pro. I just Can not get those .joboptions settings to load into IDCS2.. The permissions are set the same as those on working Macs (who are running Tiger BTW). I then opened Distiller and manually loaded each setting and resaved them out- The icons show as being .joboptions files-
    IDCS2 still won't see them. It won't have anything to do with them. Oddball stuff- not every computer has the problem only those with the combination of Leopard and the Acrobat update applied. I don't have any leopard Macs with 8.1.1 or 8.1 installed so I can't report on that.

  • Default Export Presets completely vanished

    Hi all;
    I was busy exporting images for a project, and when I went back to export another, all the default export presets were suddenly gone - all that is left in that box is something called untitled with all the settings set at 0. How do I get them back? Where did they go? Is it a view options problem or something more serious? Do I need to re-install Aperture to get them back? I would just make up my own preset, but I know diddly about gamma and color stuff etc. etc.
    Thanks to all in advance!

    Hi!
    I figured this one out by calling Mac support. I couldn't say exactly what they guided me through, but I did have to go to applications - library and delete some presets plists. All is good now.

  • Could not load default Extrusion presets because the file was not found.

    Hello,
    I am getting the above error when starting photoshop CC.
    I am working on an iMac with 10.7.5 system software.
    I can find the 'Default Extrusion Presets.p3e' file in the repousse folder but not elsewhere and dont know if it should even be elsewhere?
    Thanks

    So there's something wrong in my whole system, where I'm using all kinds of different tools (big and small tools) for my various projects without a single hitch... but somehow photoshop has encountered a problem within his own set of files.
    Again, a problem that photoshop error checking capabilities shows as a single file missing, which one would thing that's like a 5 min solution, but no. The entire monster needs to be reinstalled.
    You understand my login right?

  • Modifying the default .pdf presets

    Using CS3
    I've made my own preset for saving .pdf proofs from Illustrator. However it always defaults to the 'illustrator default' .pdf preset.
    Is there a way to either;
    - Make my preset the default so that I don't have to select it every time.
    OR
    - Modify the existing 'illustrator default' preset to be my own settings permanently.
    99% of the time I'm using my preset and it sucks having to go to the dropdown every time and choose it.

    Record an action, it remembers the preset you chose. I like to send mine to the desktop, and then I put them in the correct folders afterwards.
    Tip: I record a save prior to teh save as pdf, so I don't accidentaly make a pdf and not save my revisions to the .ai file. I do get a false positive saying that save is not available (if this has already been saved) but to me that is worth not losing track of work/revisions.
    The action is fast, and occasionally crashes illustrator sometimes(have found this true on different computer at different agencies I work at), so set your flyout menu playback settings to 1 sec delay.

  • Missing default pdf presets???

    I recently got a new computer
    I reinstalled Illustrator CS2
    Now my default pdf presets are missing - so I cant save a copy of the Illustrator file as a pdf for high quality print or screen because the 5 default presets are Missing - there is only the Illustrator default?
    I looked everywhere to find them  - not there?
    My previous OP was Windows Xp
    Now I am on Vista Home Premium
    Can anyone help?
    [email protected]

    Stephen,
    It may be time to Move the folder while Illy sleeps. Remember to reboot Windows before you wake her up again.

  • Enforce Default Printer Presets Across Multiple Users

    Hi
    Please could anyone tell me if there is a way to enforce the default printer preset across multiple users on the same computer for a network attached printer?
    I want to make sure that all of my family who each have separate accounts all print using greyscale by default.
    I would like to do this without copying plists about. I was hoping that there is some global way to do it as an administrator.
    TIA

    Hello Ian,
    I did a couple of simple tests on this topic and from what I can see there is no easy way for this to be done. The preferences (plists) are being saved in each users preference, and depending on which printer you are using the located and format for this preference is not easily copied.
    Unless there is a third party app (or something I missed) then I don't see a simple solution to this.
    Regards,
    Paul

  • Missing default filter presets in Library View [Lightroom 3.6]

    Hi there,
    It's my first topic on this forum.
    Yesterday I have installed Windows 8. At beggining everything was fine with lightroom. I have left computer turned on whole night to let lightroom generate previews to my whole collection.
    In the morning I have noticed that filters are missing in Library View:
    When I create a new filter from File -> Library Filters -> Filter By I have got filter enabled but in this view from screenshot there is no option "No filter".
    What should I click to recover all filters?
    Thanks in advance for your replies.
    EDIT:
    Topic solved.
    It occured that missing presets are not build in by default in Lightroom 3 and I got them since Lightroom 1.1. Copying catalog "Lightroom Settings" from another computer solved issue:

    Geoff the Kiwi
    Fortunately I had backed up the catalogue earlier in the day and I have the
    option set to optimize it after it gets backed up, also the option is set to
    check the integrity prior to back up. I'll back it up again since I've made no
    changes since recovery from the hang up.
    Any suggestions on steps to take the next time this happens to help in
    diagnosing the problem as I have lots of metadata work to do?
    Ken

  • Setting default printing presets for all users, esp. guest user

    i want to set black/white, two sided printing as the default for all users (9 macs, 30 users on each).
    i set up and save this preset as admin, and copy the files
    com.apple.print.custompresets.plist
    com.apple.print.custompresets.forprinter.nameofprinter.plist
    from admin home/library/preferences to the other users preferences-folders.
    but logging on to any of the other users, i still dont even get the new preset listed.
    i tried entering cups, but there, only the printer setup is editable.
    especially i would like to set the custom preset as default for the guest account, without being wiped every log off.
    is there any alternative way to do this? i dont want to manually log in to the 300 accounts to change this.

    You can do that for new users via a file user.js in the default template folder for new profiles.
    C:\Program Files\Mozilla Firefox\defaults\profile\
    *http://kb.mozillazine.org/user.js_file

  • Default printing presets

    Does anyone know of a way to make the "preset" field in the Print dialog box always default to a particular value?
    The current behavior, in Leopard at least, is for the preset field to be set to the previous choice. I typically print using a preset called "Grayscale" but then change to "Color" for one job. I would prefer that preset is reset back to "Grayscale" the next time I try to print. At the moment it stays at "Color" until I reselect "Grayscale."
    I've poked around the plist files that seem to be related to printing with no luck. Anyone have another suggestion?

    You can change the printer defaults via the CUPS web page. But by default, the CUPS page is blocked. To enable it, open Terminal and type "sudo cupsctl WebInterface=yes" (without the quotation marks). Enter the admin password when prompted and then refresh the browser view.
    With CUPS web page open, select the Printers tab and then select the printer you want to modify. Then from the Administration drop menu, change to "Set Default Options".
    This will show a new page with four menu headings (links); Options Installed, General, Banners and Policies. Select General.
    Scroll down the list until you find the option you want to set as default.
    With the option select you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button.
    When you click the 'Set Default Options' button you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
    You can now exit the CUPS admin page and check that the change is set.

  • Allow Aspect Ratio Save as Default or Preset

    Requesting feature; aspect ratios can be saved as camera default or as a develop preset.

    Hello,
    What do you have under favorites? Are there some old network shares that the computer tries to access? Do you have any other this kind of objects on your desktop or in other libraries.
    you could try to download "Wireshark" OR "network monitor" start log and capture events of whats happening on your network when you press the save as... button. This could give you a clue of WHERE the computer is trying to connect when pressing the button.
    If you logon using different account do you still get slow response on "save as..."
    BTW. Do you also get slow response when you press "Open" on the file menu?
    Download links
    Network Monitor:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    WireShark:
    http://www.wireshark.org/download.html

  • Setting a Default PDF Preset

    I have made a custom PDF Preset for my students to use.  It is loaded in all the programs fine, but I can't figure out how to make it the Default when saving/exporting from the various programs (inDesign, Illustrator, Photoshop, AutoCAD, etc). I don't want to delete the other options available but I would like the one I have made to be the Default.
    As a side note, does anyone know if there's a way to add metadata to a preset so I can see in Acrobat Pro which preset was used? Right now I just have to assume that they've used the correct one.

    This is the answer I got via someone who knows way more about PDF's than me:
    There is no way to make a specific Adobe PDF Preset a default selection across all applications. Silly, I know, but they are only shared and you have to make sure you select the proper setting when creating a PDF.
    As for the metadata that contains the preset, the only way to include the PDF preset that was used to create the PDF file is to create PostScript and go thru Distiller (making sure that “Save Adobe PDF Settings Inside PDF File” is checked under the “Advanced” tab when you edit the PDF setting in Distiller. When exporting directly from CS applications, I’m not aware of any way to embed the preset.

  • Can I modify default print "Presets"

    Hi -
    We recently purchased a Ricoh color-laser multi-function device that prints in color and black/white. Under "Printer Features/Color Mode" within the Print dialog, I can select "Black and White" or "Color" (the default is "Color"). I know how to use 'Presets' within the Print dialog to create a preset that automatically uses the "Black and White" mode.
    In order to avoid accidently using color toner, I would like to be able to have the Print command AUTOMATICALLY default to this "Black and White" mode. (I.E., I would like for "Black and White" to be the default under "Printer Features / Color Mode".
    Is this possible? (Does this make sense?)
    Thanks -

    Hello doogles,
    If your Ricoh is a PostScript device and therefore uses a PPD, you could modify the PPD so that b&w was the default rather than color (which I believe is what you were actually asking about).
    Below is some information I have used for our previous Canon iRC3200 which used an imagePASS (Fiery) C1.
    1. Open the PPD in a text editor of some sort.
    2. Go to the section describing:
    *OpenGroup: FPColorWise1/ColorWise1
    *%EFIFlags *EFColorMode Spooler|Command|Column|Setup|Rerip
    *%EFIGroup *EFColorMode FPColorWise/ColorWise
    *OpenUI *EFColorMode/Color Mode :PickOne
    *OrderDependency: 12.0 AnySetup *EFColorMode
    **DefaultEFColorMode: EFColorModeDEF*
    *EFColorMode EFColorModeDEF/Printer's default: ""
    *EFColorMode CMYK/CMYK: " userdict /XJXsetcolormode known
    { (CMYK) XJXsetcolormode } if "
    *End
    *EFColorMode GRAY/Grayscale: " userdict /XJXsetcolormode known
    { (Grayscale) XJXsetcolormode } if "
    *End
    *?EFColorMode: " currentpagedevice /ProcessColorModel get == } if "
    *CloseUI: *EFColorMode
    *CloseGroup: FPColorWise1
    This is the section in the PPD that relates to the Color Mode and what options that will be displayed in the properties of the driver.
    3. Change this section to this:
    *%EFIFlags *EFColorMode Spooler|Command|Column|Setup|Rerip
    *%EFIGroup *EFColorMode Color/Color
    *OpenUI *EFColorMode/Color Mode :PickOne
    *OrderDependency: 12.0 AnySetup *EFColorMode
    **DefaultEFColorMode: GRAY*
    *EFColorMode EFColorModeDEF/Printer's default: ""
    *EFColorMode GRAY/Grayscale: " userdict /XJXsetcolormode known
    { (Grayscale) XJXsetcolormode } if "
    *End
    *?EFColorMode: " currentpagedevice /ProcessColorModel get == } if "
    *CloseUI: *EFColorMode
    The changes to the original ppd are setting the "DefaultEFColourMode" to "Grayscale" and removing the "EFColorMode CMYK..." entry.
    4. With the changes made to the ppd, create a new printer but point to the modified PPD.
    If the Ricoh uses a proprietary printer language rather than PostScript, then it may not be possible to change.
    However, if the machine also supports PCL6, you could create another printer queue to the Ricoh and select the Generic PCL6 driver included with OS X. You could then call this queue B&W and have this set as the default printer. Then, if the user wants to print color, they simply select the current Ricoh driver.
    Note that the Generic drivers have limitations regarding finishing and don't support some larger paper sizes, such as A3. But if these are not required, then it may prove an easy alternative to modifying the PPD.
    PaHu

Maybe you are looking for