Default storage in qa11
Dear Friends
when we do stock posting during quality lot clearing, from qa11, a storage location is defaulted on the screen.Where from the system takes this storage location?
suppose we have 2 sls, a & B
for a specific material a storage location B is defaulted in qa11. I want storage location A is to be defaulted. This creates mistake by the end users. How to change this? where from I can change this?
Thanks
Chandra
Hi,
That is at which storage Location your GR has been done. That will be defaulted in UD screen.
Suppose you are performing GR for Production i.e. confirming the Production Order and for that in Goods Movement Screen for 101 movement whatever storage location you enter that will be defaulted in Inspection Lot and thus UD.
Again, this storage location in Goods Confirmation can be defaulted from Production Order->Header->Goods Receipt->Storage Location field.
To default that Production Storage Location in Production Order, set 'Production Storage Location' field in MRP2 or Work Scheduling view of Material Master.
Regards,
Tanuj Parikh
Similar Messages
-
CJ20N, auto-defaulted storage location at activity level
Hi all,
we have this problem at CJ20N (PS) screen.
At activity level, componenent overview, if user keys in the material no, a storage location is auto-defaulted
later we found out that if the material is extended to only 1 storage location, the storage will be auto-defaulted at componenet overwview, is there any setting to prevent the auto-defaulted storage .. pls adviceHi,
Carry out these IMG steps:
SPRO
Logistic Execution
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Set Up Storage-Location Dependent Shipping Point Determination
Assign Shipping Points According to Storage Location,,,,,,,,
Put in your combination of Shipping Conditions / Loading Group/ Plant/ Storage Location/ Proposed shipping point
Next time you create a Delivery document,, the system will pick up the above values from the Material/Customer master records and propose a Storage Location at line item number.
I just tried it and it works, let me know if this works.
Cheers,
Mohammed
Edited by: Mohammed Raheel on Jun 5, 2009 1:09 PM
Edited by: Mohammed Raheel on Jun 5, 2009 1:11 PM -
Set default storage categories
Hello,
We have content server on MaxDB with several repositories and storage categories.
How can I limit users for storage categories/repositories?
How can I configure a default storage category for user/document?
Thank you for your support,
YossefHi Yossi
You can use profile option in DMS for this. More information on Profile option you can get in the community.
You can get detailed help in help.sap.com>erp>dms.> ..>defaut values for original application files.
Regards
Prasad -
i have the razr hd and i was wondering if anyone knew how to change the default storage to the external sd card? i have moved the camera settings to this one but i dont know how to change the default phone settings to it. little help please?
Good Afternoon gacrkr85,
We would be delighted to help out today. We fully understand how important it is to be aware of applicable storage options on your device. When it comes to your device storage allowances, generally speaking only pictures, videos, & music can be stored to the SD Card. Applications and system information/settings can only be stored on the internal memory of the device. What type of information/files are you attempting to send to the SD Card? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
Default Storage Location - in DMS
Dear Gurus,
I am trying to integrate SAP Easy Document with DMS. I am able to chekc-in the file with Tcode CV01n in to storage category whcih I have created. But when I try to check-in the file through SAP Easy Document, system will give the error as " Error while check in storing".
I think SAP easy document is taking some other storage catogory by dafult. How can I default the storage catogory which I have created.
Thanks
Damodar PaiHi,
please check the following
1.)When logging on via Easy DMS for the first time, system will prompt you to create a root folder. Confirm dialog box with u201Cyesu201D and enter name of the root folder.
2.)When creating the first document (see Business Process Procedure script) of a particular document type, select the appropriate type from the dialog box (for example XLS for Microsoft excel files) and activate the checkbox Use this application for all files with this extension. Choose OK.
3.)When creating the first document (see Business Process Procedure script), select default storage u201CDMS_C1_STu201D and activate the checkbox Use this storage category for all files. Choose OK.
note : use your storage catagory!
Benakaraj
??P -
Default Storage versus Uniform size at creating Tablespace
anybody can explain if those two concepts mean same? in my practice, i need to dump all data from 9i to 10g database, in 9i a tablespace created by :
CREATE TABLESPACE DATA_TS
DATAFILE '/opt/oracle/u01/data_04.dbf' SIZE 11M AUTOEXTEND ON NEXT 1024K MAXSIZE UNLIMITED
EXTENT MANAGEMENT DICTIONARY
LOGGING
DEFAULT STORAGE(INITIAL 112K
NEXT 112K
MINEXTENTS 1
MAXEXTENTS 1017
PCTINCREASE 0)
ONLINE
PERMANENT
SEGMENT SPACE MANAGEMENT MANUAL
so in 10g I created tblsp like:
CREATE TABLESPACE DATA_TS
DATAFILE '/opt/oracle/u10/data_04.dbf' SIZE 11M AUTOEXTEND ON NEXT 1024K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 112K
LOGGING
ONLINE
SEGMENT SPACE MANAGEMENT MANUAL
are they same?Hi,
Two concepts are not same.
Check this link:
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96521/tspaces.htm
Starting with Oracle9i, the default for extent management when creating a tablespace is locally managed. However, you can explicitly specify that you want to create a dictionary-managed tablespace. For dictionary-managed tablespaces, Oracle updates the appropriate tables in the data dictionary whenever an extent is allocated, or freed for reuse. -
Hello Gurus,
I am creating a stock transport order and creating a delivery through VL10G, when i create the delivery the default storage location should be X, but it is taking Y as default storage location. Can you guide me through config and also would there be any userexits that can be kept for this storage location.
Thanks,
SriHi,
Can you check the below config done?..
1)SPRO>LE>shipping>Picking>Determine Picking Location..
2) Define rule for picking locn determination for the delivery type..in your case for deli typ..NL or NLCC
3)Go to "assign picking location" submenu and maintain default picking storage location for the data as per Rule. e.g. if rule is shipping point plant and storage condition...you need to maintain X SLoc for particular shipping point, plant and storage condition.
Hope this will help..
Reg,
Sudhir -
Default Storage Location of Child items in BOM
Hi Experts,
We are facing a problem, when we create BOM, we have to manually put default Storage location (Backflush Storage Location) in each of the line item. Can somebody suggest me some solution sothat it should come automatically in all the line items.
IshuDear Ishu,
1.Backflushing storage location can be set either in the material master in MRP 2 view or else in the BOM under status/Long text
tab page.
2.The reason why SAP has provided this option at 2 places is if the material is always backflushed from the same storage
location for any assembly(assuming if this material is used in diferent assembly) means you can set it in the material master.
3.If it's BOM or assembly specific means,set it in the BOM.
4.You have to set this if the backflushing storage location is getting varied for the same component for different assembly
structure.(This system will not propose automatically).
Regards
S Mangalraj -
Default storage for locally managed tablespaces
the documentation says you cannot have a default storage parameter for locally managed tablespaces. Does this mean that we cannot specify
INITIAL
NEXT
PCTINCREASE
MINEXTENTS
MAXEXTENTS for such tablespaces, or is there another way we can, without using default storage?
thanksI amnot sure where you read that part that the default storage clause can't be given.Please see here,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1149
From the doc,
Creating a Locally Managed Tablespace
If the CREATE TABLESPACE statement includes a DEFAULT storage clause, then the database considers the following:
If you specified the MINIMUM EXTENT clause, the database evaluates whether the values of MINIMUM EXTENT, INITIAL, and NEXT are equal and the value of PCTINCREASE is 0. If so, the database creates a locally managed uniform tablespace with extent size = INITIAL. If the MINIMUM EXTENT, INITIAL, and NEXT parameters are not equal, or if PCTINCREASE is not 0, the database ignores any extent storage parameters you may specify and creates a locally managed, autoallocated tablespace.
If you did not specify MINIMUM EXTENT clause, the database evaluates only whether the storage values of INITIAL and NEXT are equal and PCTINCREASE is 0. If so, the tablespace is locally managed and uniform. Otherwise, the tablespace is locally managed and autoallocated.
HTH
Aman.... -
Default storage location setting
Hi,
how can i set the default storage location.
I need to reflect it autometically while booking any order.
Regards,
RajdeepHi Rajdeep,
there are quite different ways to achieve this,
- If you are open for enhancement, then write the piece of coding to default the storage location in Includ:MV45AFZB under
USEREXIT_SOURCE_DETERMINATION which could be applicable for all doc types or set of doc types/ item cat's
OR
- You can achieve the same requirement with Transaction variant in Tx:SHD0 while recording enter this field manually & at the time of save , save it as "with content" & assign this variant in order doc type details in VOV8.
then whenver you create sales order using this doc type, storage location will be defaulted. ( assumption is - you have single storage location which has to be defaulted in order)
Hope it helps,
Regards,
ReazuddinMD -
Default Storage Category for easyDMS
Hello Everyone,
I currently assigned default storage category (using KPRO) for my user on,
easyDMS -> Organize -> Preferences -> System (Tab)
How can I make this storage category defaulted for all the users using easyDMS?
Regards,
MohanHello Chandu,
I already have above mentioned settings available in SPRO, these settings works for GUI and NWBC.
What that means is, there is no pop up window with Storage Categories to select while performing Document Check-In.
In easyDMS, system still asks user to manually select the Storage Category, I added Storage category for my user profile on easy preferences and I believe this needs to be done for all the users using easyDMS.
I would like to know how can I apply this change to all the users from configuration/system point of view.
Thank you
Mohan -
ORA-25143: default storage clause is not compatible with allocation policy
Dears,,
While running the following command , it gave me error:
ALTER TABLESPACE USER_DATA default storage (MAXEXTENTS unlimited);
ERROR at line 1:
ORA-25143: default storage clause is not compatible with allocation policy
I tried a lot for that error and tested all possible solutions but without result.
Is there any one faced this error before?
Thanks & Best regards,,Dear,,
As i said before in previous reply that:
I can not give a default storage clause to a local managed tablespace.
So, only i increased spaces for data files
Also,see the following . . .
SQL> ALTER TABLESPACE ts_name default storage (MAXEXTENTS 1000);
ALTER TABLESPACE ts_name default storage (MAXEXTENTS 1000)
ERROR at line 1:
ORA-25143: default storage clause is not compatible with allocation policy
SQL> ALTER TABLESPACE ts_name storage (MAXEXTENTS 1000);
ALTER TABLESPACE ts_name storage (MAXEXTENTS 1000)
ERROR at line 1:
ORA-02142: missing or invalid ALTER TABLESPACE option
I already solved my issue by increasing spaces for data files
Thanks for support and help
Best regards,, -
Change default storage location during creation of PO
Hello all,
I have the following question.
When creating a purchase order using ME21N and filling in the items, the storage location is retreived from the material masterdata and displayed as default.
I need to change this default, because the storage location must be determined in another way.
So when entering the values for the item in the screen, another Stloc needs to be determined and displayed, overwriting the Stloc from the material master data.
For this I probably need a BAPI.
Can anyone tell me which BAPI to use and how I can implement this?
Because I also no experience with BAPI's.
Thanks in advance.
Kind regards,
MarcoHi Van,
You need to goto SE18 -> give 'ME_PROCESS_PO_CUST' in BADI Name - > Click on Enhancement Implementation at the header -> Create -> Give some implementation name starts with 'Z ->provide some short description -> Here you need to click on 'Interface' tab -> and double click on the method which serves your purpose.
I think you need to do the enhancement for storage location so you need to use the method 'PROCESS_ITEM'.
<text removes>
Thanks,
Siva
Message was edited by: Matthew Billingham - don't ask for points -
How to check in document in default storage when using CV01N?
Hi community!
I was in the process of configuring content server for an ECC 6.0.
I had installed the content server version 4.6 in a separate system and its working well.
Then i finished all the configurations relating to creation of repository and linking it to content server through CSADMIN. I am setting in DC10 use KPRO. In transaction spro Cross-Application Components --> Document Management --> General Data --> Define Profile. I am create a profile, which can be assigned either to a role. Under "Determine definitions for applications" i am define a storage category to a workstation-application. However, when I go to CV01N, and try to check in a new document i did not even get the drop down list instead of my default value. Saves if I manually select "Check In". Am I missing a step??
Edited by: Igor Polushkin on Apr 15, 2010 1:55 PMHi Igor,
If there is no profile based on user-id then it calls FM SUSR_USER_AGR_ACTIVITYGR_GET to check if there are any roles existing with the user-id assigned to it. For example: it returns one role.
Now if this role is assigned to two different profiles, then the system picks anyone profile and accordingly use the settings maintained to this profile.
Please make sure that if a user-id is assigned to more than one role and both these roles is used in different profiles then in this case you have to explicitly mention the user-id in the profile directly rather than using only the role name.
Below is the explanation with example :
Consider that USER_1 is assigned to ROLE_1 and ROLE_2. And this USER_1 is linked to two different profiles using these roles. If you want that USER_1 should use Profile_1 please make the settings as below :
Profile_Key Role User Name
Profile_1 ROLE_1 USER_1
Profile_2 ROLE_2 -
The below settings does not work, as system can pick wrong profile.
Profile_Key Role User Name
Profile_1 ROLE_1 -
Profile_2 ROLE_2 -
I hope this information could be useful for you and help to get your profile settings work.
Another solution for controlling which storage category will be choosen is to use an implementation of BADI DOCUMENT_STORAGE01 with method BEFORE_LIST_STORAGECAT.
Best regards,
Christoph -
Default storage location for transfer posting
Hi Gurus,
In transfer posting using mvt type 311,i want to make the storage location defaulted by a particular storage location. In other words system should not allow transfer posting if i use other storage location. Is this possible?
Regards,
Kumar[Restrict user to post to a particular storage location|Restrict user to post 313 to a particular storage location.]
Maybe you are looking for
-
No send button when trying to send a direct message on twitter
I have an ipad mini and every time i want to reply to a dm, i cannot see what i am writing or even send the message. Please help!!
-
Add link to placeholders in mail
Does anybody know of a way to add a link to a image in an imageholder of mail stationery?
-
Hi! I'm plannig to order a Mac Mini i7, 8gb RAM, 750gb/256 SSD. I'm a Final Cut 7, After Effects and Photoshop user. I'm worry about the Mac Mini specs. Can this machine support dual screens. Will I be able to do smooth editing...?
-
Itunes Store will not load again.
Here we go again. Upgraded to iTunes 10.5, now iTunes Store will not load again in iTUnes. Tried the prior answer in Aug. 17, but does not work this time. Uninstalled iTunes and Apple App. Servce and Quicktime. Reinstalled iTunes from new download. S
-
I can only hear my record enabled track when recording,not when just playing
This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording. I must have accidentally selected an option i am unaware of - can someone please h