Default storage location setting

Hi,
how can i set the default storage location.
I need to reflect it autometically while booking any order.
Regards,
Rajdeep

Hi Rajdeep,
there are quite different ways to achieve this,
- If you are open for enhancement, then write the piece of coding to default the storage location in Includ:MV45AFZB under
USEREXIT_SOURCE_DETERMINATION which could be applicable for all doc types or set of doc types/ item cat's
OR
- You can achieve the same requirement with Transaction variant in Tx:SHD0 while recording enter this field manually & at the time of save , save it as "with content" & assign this variant in order doc type details in VOV8.
then whenver you create sales order using this doc type, storage location will be defaulted. ( assumption is - you have single storage location which has to be defaulted in order)
Hope it helps,
Regards,
ReazuddinMD

Similar Messages

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

Default Storage Location of Child items in BOM

Hi Experts,
We are facing a problem, when we create BOM, we have to manually put default Storage location (Backflush Storage Location) in each of the line item. Can somebody suggest me some solution sothat it should come automatically in all the line items.
Ishu

Dear Ishu,
1.Backflushing storage location can be set either in the material master in MRP 2 view or else in the BOM under status/Long text
tab page.
2.The reason why SAP has provided this option at 2 places is if the material is always backflushed from the same storage
location for any assembly(assuming if this material is used in diferent assembly) means you can set it in the material master.
3.If it's BOM or assembly specific means,set it in the BOM.
4.You have to set this if the backflushing storage location is getting varied for the same component for different assembly
structure.(This system will not propose automatically).
Regards
S Mangalraj

IMovie cannot share and no storage location set

I am using iMovie 10.0.6 on a Retina iMac running Yosemite.
iMovie suddenly developed the following maddening behavior, which I have yet to resolve despite trying many of the usual tricks:
Attempting to import to an event using my isight camera or my Canon HV20 camera in a library on my internal SSD results in the following popup message: "No storage location set: Cannot start ingest because there is not storage location set. Please set one under Storage in Preferences and try again."
It is possible to import by loading a file to my local library. However creating a project with that file results in the strange behavior that the clips from that file remain blue and don't fill in with the preview.
I cannot share or export any project. Clicking "Share" in file or the "Share" button displays the options, by when I click on the share option, nothing happens.
Importing to library in an external hard drive succeeds without the error message. The clips in the projects created in the external libarary do fill in with the preview pictures. However, I am not able to share or export a project in the external library either.
When I log into my son's account on the same machine, iMovie works fine. I am able to import to his accounts library and I'm able to share, the share button works as normal.
I have tried the following remedies, none have worked:
1)delete the iMovie app and reinstall.
2)delete every iMovie preference in ~/Library/preferences
3)delete iMovie caches
4)delete iMovie receipts
5)repair permissions using disk utility
6)reset user permissions and ACLs using "reset user password" in terminal
7)reinstall Yosemite from recovery (preserving user files)
8) reset pram and SMC
There must be some very hidden persistent setting corrupted that is either verry hidden or not explicitly part of iMovie; perhaps a common sharing or video import application? Does anyone have any ideas?

Brilliant - it worked for me, although I had to look around inside the
/var/folders/
and found it under another with two letter
Thank you ultrahertz

'No Storage Location Set' - warning on a loop!

I get this message when trying to import from my Sony Camcorder:
"Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again."
In Preferences.... there is no option to set one

I think these are the steps I took:
1 Shut down the computer completey and then startup again (Camcorder disconnected)
2 Connect camcorder and in iMovie follow the procedure to import from camera. This triggers the launching of iPhoto - but as iPhoto started to launch I had the mouse pointer on the iPhoto icon at the bottom of the screen and right clicked the mouse with the option button held and selected 'Force Quit'
It worked for me and I hope it works for you! Later when I went to import again, both iPhoto and iMovie behaved as expected.
The whole thing is a mystery to me and the original message is no help at all and gives no guidance as to how to solve this (common?) problem.
Hopefully this 'bug' can be fixed by Apple engineers -fingers crossed.

I Movie message:No Storage Location set while importing from HD Handycam

While importing media from sony handycam (HD file based cam) the following message appears after the clips are ready to be imported:No Storage Location set. Cannot start ingestbecause there is no storage location set. Please set one under Storage in Preferences and try again.

I think these are the steps I took:
1 Shut down the computer completey and then startup again (Camcorder disconnected)
2 Connect camcorder and in iMovie follow the procedure to import from camera. This triggers the launching of iPhoto - but as iPhoto started to launch I had the mouse pointer on the iPhoto icon at the bottom of the screen and right clicked the mouse with the option button held and selected 'Force Quit'
It worked for me and I hope it works for you! Later when I went to import again, both iPhoto and iMovie behaved as expected.
The whole thing is a mystery to me and the original message is no help at all and gives no guidance as to how to solve this (common?) problem.
Hopefully this 'bug' can be fixed by Apple engineers -fingers crossed.

Default Storage Location

Hello Gurus,
I am creating a stock transport order and creating a delivery through VL10G, when i create the delivery the default storage location should be X, but it is taking Y as default storage location. Can you guide me through config and also would there be any userexits that can be kept for this storage location.
Thanks,
Sri

Hi,
Can you check the below config done?..
1)SPRO>LE>shipping>Picking>Determine Picking Location..
2) Define rule for picking locn determination for the delivery type..in your case for deli typ..NL or NLCC
3)Go to "assign picking location" submenu and maintain default picking storage location for the data as per Rule. e.g. if rule is shipping point plant and storage condition...you need to maintain X SLoc for particular shipping point, plant and storage condition.
Hope this will help..
Reg,
Sudhir

Import problems. "NO STORAGE LOCATION SET"

Hi, I'm having issues importing footage into FCPX. I keep getting the error message "NO STORAGE LOCATION SET"
I have tried everything including re-installing the program and deleting relevant files from final cut library preferences.
The footage is save onto my drive. I've tried different footage on different drives.
Any one else had this problem?
I'm really stuck here.

I think these are the steps I took:
1 Shut down the computer completey and then startup again (Camcorder disconnected)
2 Connect camcorder and in iMovie follow the procedure to import from camera. This triggers the launching of iPhoto - but as iPhoto started to launch I had the mouse pointer on the iPhoto icon at the bottom of the screen and right clicked the mouse with the option button held and selected 'Force Quit'
It worked for me and I hope it works for you! Later when I went to import again, both iPhoto and iMovie behaved as expected.
The whole thing is a mystery to me and the original message is no help at all and gives no guidance as to how to solve this (common?) problem.
Hopefully this 'bug' can be fixed by Apple engineers -fingers crossed.

No storage location set

Hi Im trying to import some footage into FCP X 10.1.1 but I get the following message "Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again"
Can someone please help?

I'm getting same problem:
(FCP 10.1.1/OS 10.9.2)
Here are the import settings:

CJ20N, auto-defaulted storage location at activity level

Hi all,
we have this problem at CJ20N (PS) screen.
At activity level, componenent overview, if user keys in the material no, a storage location is auto-defaulted
later we found out that if the material is extended to only 1 storage location, the storage will be auto-defaulted at componenet overwview, is there any setting to prevent the auto-defaulted storage .. pls advice

Hi,
Carry out these IMG steps:
SPRO
Logistic Execution
Basic Shipping Functions
Shipping Point and Goods Receiving Point Determination
Set Up Storage-Location Dependent Shipping Point Determination
Assign Shipping Points According to Storage Location,,,,,,,,
Put in your combination of Shipping Conditions / Loading Group/ Plant/ Storage Location/ Proposed shipping point
Next time you create a Delivery document,, the system will pick up the above values from the Material/Customer master records and propose a Storage Location at line item number.
I just tried it and it works, let me know if this works.
Cheers,
Mohammed
Edited by: Mohammed Raheel on Jun 5, 2009 1:09 PM
Edited by: Mohammed Raheel on Jun 5, 2009 1:11 PM

Default Storage location from PO to GR

Dear All,
How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
regards,
qsm sap

Hi,
First Storage location should be extended in Material master.
Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
One other option is In IMG settings if you set the checkbox set storage location automatically.
Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
No matter if you extended in material master/PR/PO
rgds
Chidanand

Change default storage location during creation of PO

Hello all,
I have the following question.
When creating a purchase order using ME21N and filling in the items, the storage location is retreived from the material masterdata and displayed as default.
I need to change this default, because the storage location must be determined in another way.
So when entering the values for the item in the screen, another Stloc needs to be determined and displayed, overwriting the Stloc from the material master data.
For this I probably need a BAPI.
Can anyone tell me which BAPI to use and how I can implement this?
Because I also no experience with BAPI's.
Thanks in advance.
Kind regards,
Marco

Hi Van,
You need to goto SE18 -> give 'ME_PROCESS_PO_CUST' in BADI Name - > Click on Enhancement Implementation at the header -> Create -> Give some implementation name starts with 'Z ->provide some short description -> Here you need to click on 'Interface' tab -> and double click on the method which serves your purpose.
I think you need to do the enhancement for storage location so you need to use the method 'PROCESS_ITEM'.
<text removes>
Thanks,
Siva
Message was edited by: Matthew Billingham - don't ask for points

Purchase Order - Issue storage location set mandatory entry

Hello All,
When create subcontracting PO, want to set the field of Issue storage location as mandatory.
I tried to find configuration "Materials Management>Purchasing>Purchase Order-->Define Screen Layout at Document Level", but there is not entry "Issue storage location" to set the screen layout field.
I searched previous threads, but only find some to mention issue storage location for STO. Now, I just use subcontracting PO that is same as NB document type.
Please your kind suggestion or any method to set Issue storage location as mandatory in PO.
Thanks very much!
Mag

Hi ,
Please, could you re-check it again, I have found storage location and issue storage location fields under define fields for fields selection group.
Under Field selection group NBF Purchase order
Selection group                    supplying plant
Issue storage location required entry chose
Under Field selection group NBF Purchase order
Selection group                    Basic data item
Storage location   required entry chose
After this setting, I can be find this storage location fields as Mandatory.
Regards,
Thiru

Default storage location for transfer posting

Hi Gurus,
In transfer posting using mvt type 311,i want to make the storage location defaulted by a particular storage location. In other words system should not allow transfer posting if i use other storage location. Is this possible?
Regards,
Kumar

[Restrict user to post to a particular storage location|Restrict user to post 313 to a particular storage location.]

Default Storage location from the Material master

Can we default the storage location from the material master into the reservation line item in trasaction MB21?

enter the production storage location in material master MRP2 view.
Edited by: Jürgen L. on May 7, 2008 6:52 PM

Default storage location setting

Similar Messages

Maybe you are looking for