Default Subpackage Names for Business Components (11g); Bug?

Does anyone know how to enable the ability to specify the default packages under Tools -> Default Project Properties ->Business Components -> Packages?
Mine are all greyed out.
Also, even when I have the bare minimum of an ADF model project, before even checking "Initialize Project for Business Components", the defalt packages are greyed out.
Further, once I do check "Initialize Project for Business Components", the section for Default Subpackage Names is complete gone.
I want to be able to specifiy the subpackages, so that when I regenerate entities etc. from tables the components go to the right packages.
Thanks for any help.

This seems like a bug to me. If you select Initialize Project for Business Components, everything is enabled. And stays that way even after you open a different application.
But , You can set these values under Tools - Preferences - Business Components - Packages. This works nicely. Once you set these, create a new application and things will be fine. If you have existing application, it may require some xml file (.jpr) manipulation. That seems to be a nicer approach. I don't know what is the purpose of Default Project Properties, when you can set everything by Tools - Preferences.

Similar Messages

  • "Untitled" as default document name for new documents

    I have one installation of Adobe Illustrator CS2 in a Mac with which I have the following problem:
    Whenever I go to File->New, to create a new document, the default document name is blank, and it should be "untitled".
    Is there a way (without reinstalling) to correct this? (turn the default blank document name to "untitled" default document name, for new documents)
    Thank you.
    Juan Poniachik

    On what Mac? If it's on a new Mac with Snow Leopard, I would guess it is one of those compatibility issues of new OS vs. legacy software. If so, you can't change any of that. Other than that I can only think of trying to edit the document templates...
    Mylenium

  • Default caller name for a given phone number

    If you have multiple contacts that have a phone number in common, is it possible to decide which of those contacts is the default display name for that number?
    For example, I have an entry for my wife. I also have an entry for "ICE" (In Case of Emergency). They're essentially the same. When my wife calls or texts me, the display says "ICE." I want it to say "Wife."
    Is this possible?

    Nope.
    BTW, I am curious, do you have a passcode lock on your phone? If so, doesn't that pretty much make any ICE contact pointless since they cannot access the phone?
    Understand your desire to have it there though. Also, there are apps out there (think called ICE) that can let you put a icon on your screen that says ICE and then link that to a number.
    Message was edited by: DaVBMan

  • Default Last name for Spouse in Family infotype 0021

    Hi,
    We have a requirement and wondering somebody could help me with that:
    when ever we maintain the Family infotype 0021 - If the person is married the spouse last name is automatically populating in the last name field. Is there any functionality which would allow the last name of the female spouse come in as blank as it is not standard for the last name to be same as husband.
    Regards,
    Raghu

    Hello there,
    Looks like defaulting last name is standard behavior in different countries specifics:
    Note 1001323 - Defaulting of Last name in IT0021 (Family/Related Person)
    [https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1001323]
    Note 1083523 - Defaulting Last name in IT0021
    [https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083523]
    Note 625670 - MASTER DATA: Default family name for all IT0021 subtypes
    [https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=625670]
    MP002120     35     IF P0021-FANAM EQ SPACE AND PSYST-IOPER EQ 'INS'.    "note 1083523       
                   36       MOVE P0002-NACHN TO P0021-FANAM.                                       
    MP00212R     50    IF P0021-FANAM EQ SPACE AND PSYST-IOPER EQ INSERT.      "JM#1001323  
                   51       MOVE P0002-NACHN TO P0021-FANAM.
    So if you wish, you can overwrite this according to sandbisw1983 instructions.
    Greetz.

  • UIX JSP For Business Components

    I am looking for option under Web Tier - UIX JSP For Business Components - Complete UIX JSP Application. I cannot see that option in Jdeveloper 10g which was avaialble in 9i. What is the turnaround for it.
    I have an application which I wanted to convert it to jsp, so that I could deploy it on the web.
    Thanks in advance.

    We removed the "complete application" wizard in JDeveloper 9.0.5 since the application it was generating was hard to customize. Check out the tutorials on the JDeveloper home page to see how to build a complete application.

  • JDeveloper 9.0.5 and creating JSP for Business Components (BC4J)

    Hi,
    We've been creating Web applications from our BC4J projects quite happily using JDeveloper version 9.0.3 using the option on JSP for Business Components under the Web Tier Category. Recently we've been looking at version 9.0.5 and this option doesn't exist anymore. Does anyone know what the equivalent in 9.0.5 is to achieve this automated production of web applications.
    Regards

    Catherine,
    This wizard no longer exists in JDeveloper 10g.
    We found that in the overwhelming majoring of cases, developers would use the wizard to generate a number of pages and then "hit a wall" because they didn't understand how to evolve the applications to do something more close to what they really wanted. The results produced didn't lend themselves well to iterative modification, which in the end is what the bulk of application development ends up being.
    In JDeveloper 10g, the developer builds up pages and ties them together in a less fully-automated way, but in a way that means encourages the interative and consistent "RAD" approach using visual editor, property palette, code editor, and structure window.

  • Can you create a different default Opportunity name for Lead conversion?

    We're using CRMOD for a high-volume call center and we end up with leads with the same name. According to the online help, "The First Name and Last Name for the lead appear in the Opportunity Name field by default." That's working correctly, but it would make our lives easier if it did something different, like maybe First Name, Last Name, and ZIP code, or First Name, Last Name, and a Timestamp. Is there a way to do that? I realize the users could do something manually, but then I get all the associated issues.

    I'm not quite sure how that would work. I attempted this in staging using [<AccountName>]+" "+[<AccountLocation>], and I checked the Post Default box. When I go to convert a Lead, it still defaults to First Name and Last Name on the Convert Lead screen.

  • Logical Sys Name for Business system in SLD for Third Party

    Hi !!
    I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
    thanks
    Gowri

    Hi Gowri,
    sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
    Regards,
    Udo

  • How to set the default file name for upload

    Hi All,
    I have the following BSP app for a file upload of a csv file. I want the page when displayed show the default file name to be loaded as c:\db1\currentPM.csv
    What changes do I need to make to get the default file name in the BSP app.
    Thanks
    Karen
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content id               = "content"
                   design           = "classicdesign2002design2003"
                   controlRendering = "sap"
                   rtlAutoSwitch    = "true" >
      <htmlb:page title="File Upload " >
        <htmlb:form method       = "post"
                    encodingType = "multipart/form-data">
              <htmlb:textView text   = "File:"
                              design = "STANDARD" />
              <htmlb:fileUpload id          = "uploadID"
                                onUpload    = "UploadFile"
                                upload_text ="Upload"/>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    On Input Processing
    event handler for checking and processing user input and
    for defining navigation
    DATA: EVENT TYPE REF TO IF_HTMLB_DATA,
          DATA TYPE REF TO CL_HTMLB_FILEUPLOAD,
          LV_OUTPUT_LENGTH TYPE I,
          LV_TEXT_BUFFER TYPE STRING,
          FILE_NAME TYPE STRING,
          FILE_PATH TYPE STRING ,
          INTERN TYPE TABLE OF  ZALSMEX_TABLINE.
    DATA: LT_BINARY_TAB TYPE TABLE OF SDOKCNTBIN .
    TYPES: BEGIN OF TY_TAB,
           FIELD1(2) TYPE C,
           FIELD2(2) TYPE C,
           FIELD3(2) TYPE C,
           FIELD4(2) TYPE C,
           FIELD5(2) TYPE C,
           END OF TY_TAB.
    DATA:  WA_TAB TYPE TY_TAB,
           IT_TAB TYPE TABLE OF TY_TAB.
    TYPES: BEGIN OF TY_LINE,
              LINE(255) TYPE C,
           END OF TY_LINE.
    DATA:  WA_LINE TYPE TY_LINE,
           IT_LINE TYPE TABLE OF TY_LINE.
    EVENT = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
    IF EVENT IS NOT INITIAL AND EVENT->EVENT_NAME = HTMLB_EVENTS=>FILEUPLOAD.
      DATA ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST = RUNTIME->SERVER->REQUEST NAME = 'fileUpload' ID = 'uploadID' ).
      FILE_NAME = DATA->FILE_NAME.
      FILE_PATH = FILE_NAME.
      IF DATA IS NOT INITIAL.
        CALL FUNCTION'SCMS_XSTRING_TO_BINARY'
         EXPORTING BUFFER = DATA->FILE_CONTENT
         IMPORTING OUTPUT_LENGTH = LV_OUTPUT_LENGTH
         TABLES BINARY_TAB = LT_BINARY_TAB .
        CALL FUNCTION'SCMS_BINARY_TO_STRING'
        EXPORTING INPUT_LENGTH = LV_OUTPUT_LENGTH
         IMPORTING TEXT_BUFFER = LV_TEXT_BUFFER
         TABLES
         BINARY_TAB = LT_BINARY_TAB.
        IF SY-SUBRC = 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        SPLIT LV_TEXT_BUFFER AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE IT_LINE.
        IF SY-SUBRC = 0.
          LOOP AT IT_LINE INTO WA_LINE.
           SPLIT WA_LINE AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
            split wa_line at ','
            INTO WA_TAB-FIELD1 WA_TAB-FIELD2 WA_TAB-FIELD3 WA_TAB-FIELD4 WA_TAB-FIELD5.
            append wa_tab to it_tab.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDIF.

    Also, I missed another point.
    In the folder c:\dbdata I have a number of CSV files on the user frontend. I would like the BSP application to get the list of files in the folder and process them one after the other. How can I get the list of files on the folder in the user PC and how to process them one after the other.
    I want the form to display only the default folder and once I press on upload it must process all files and display the status of processing on the same page.
    Please kindly share ideas how I can implement this app.
    Thanks
    Karen

  • Default system names for several RFCs in a WebDynpro project

    Hi , I have a doubt, currently I am adding several RFCs to a WebDynpro project , all of them with the same "Default system logical name" for model instances and RFC metadata..
    It is ok to give the same "default system logical name" for all my RFCs" or should I give a different name for each RFC I add to my project ?
    Which way do you recommend to configure all RFCs in my project?
    Thanks in advance....

    Hi ,
    check the below link reg Effective Web Dynpro - Adaptive RFC Models , hope it will help you
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
    Regards,
    Sunitha Hari

  • What is the appropriate product name for CSS 11500 on Bug Toolkit

    Today I tried to search DDTs of CSS 11500 on Bug Toolkit (http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl), however I can not find out appropriate product name corresponding to CSS 11500.
    Before I had searched DDTs of CSS 11500 on Bug Toolkit many times, at that time, if my memory correct..
    I selected "Cisco CSS 11500 Series Content Services Switches" in the list of "Search for bugs in other Cisco software and hardware products" on Bug Toolkit.
    But I can not find this product name today.
    Do you know what product name appropriate for CSS 11500 on Bug Toolkit ?
    Your information would be appreciated.
    Best regards,

    Hi Gilles,
    Thank you for your cooperation.
    Today, I can find the CSS at "new Bug Toolkit".
    http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    Select Product Category: Application Networking Services
    Select Product: Cisco CSS 11000 Series Content Services
    So I understand I should go "new Bug Toolkit" instead of old "Bug Toolkit" to
    search any DDTs for CSS 11500.
    Many thanks.
    Best regards,

  • Default partition name for Interval partitioned tables

    Hi ,
    Can we change the default partition names which are generated by Oracle.
    For Example :
    CREATE TABLE part_interval (
    id NUMBER,
    created_date DATE
    PARTITION BY RANGE (created_date)
    INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))
    PARTITION part_01 values LESS THAN (TO_DATE('01-NOV-2007','DD-MON-YYYY'))
    Now if I insert values which doesn't fall in the 01-NOV-2007 date, a new partition is created like SYS_P43. Can I change this default partition name in the SQL statement itself . Not through procedures or functions.
    Regards,
    Raghunathan A
    Edited by: 869187 on Jun 29, 2011 6:08 AM

    869187 wrote:
    Hi ,
    Can we change the default partition names which are generated by Oracle. post SQL & results that show you can change partition names generated by YOU.

  • Resolving errors during Oracle 8i Corba Deployment for Business Components Project

    Below is an excerpt from the messages that were put out while creating a deployment profile for Corba for a Business Components Project. I am using JDeveloper 3.0.
    resolving: oracle/jbo/server/DatabaseTransactionFactory
    Error while resolving class oracle/jbo/server/DatabaseTransactionFactory
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/common/remote/PiggybackReturn
    resolving: oracle/jbo/server/xml/JTPersistable
    resolving: oracle/jbo/server/util/JboSQLUtil
    Error while resolving class oracle/jbo/server/util/JboSQLUtil
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/server/xml/XMLContextCustImpl
    oracle/jbo/server/xml/JTStorageOutput is already resolved
    resolving: oracle/jbo/server/java/util/Iterator
    resolving: oracle/jbo/server/rules/JboSQLCompareValidator
    Error while resolving class oracle/jbo/server/rules/JboSQLCompareValidator
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/server/ValidationManager
    Error while resolving class oracle/jbo/server/ValidationManager
    Exception java.sql.SQLException: End of TNS data channel
    initialization complete
    resolving: oracle/jbo/server/TransactionListener
    Error while resolving class oracle/jbo/server/TransactionListener
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/common/CheckedListResourceBundle
    resolving: oracle/jbo/DeleteEvent
    Error while resolving class oracle/jbo/DeleteEvent
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/common/PiggybackObjRemovedEntry
    resolving: oracle/jbo/server/rules/SQLBindUtility
    resolving: oracle/jbo/server/ViewRowCache
    Error while resolving class oracle/jbo/server/ViewRowCache
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/server/ContainerObjectEvent
    resolving: oracle/jbo/domain/Char$1$facClass
    Error while resolving class oracle/jbo/domain/Char$1$facClass
    ORA-29554: unhandled Java out of memory condition
    resolving: oracle/jbo/server/xml/JTStorageInput
    resolving: oracle/jbo/server/java/util/ArraySet
    resolving: oracle/jbo/common/JboInitialContext$HomeNameParser
    oracle/jbo/server/java/util/ListIterator is already resolved
    resolving: oracle/jbo/server/xml/VersionProcessException
    resolving: oracle/jbo/ScrollEvent
    Are these known errors, are they likely to cause problems? Was the deployment "successful"? The process did continue after summarizing the number of errors during the resolution process and eventually terminated.

    Hi Peter,
    The process of resolving the transitive closure of a large set of java classes (like the BC4J framework) can be quite memory intensive in JServer for the resolution phase.
    You can alleviate this problem by turning the verifier (-noverify option) off.
    That will speed up the resolution process a bit.
    Also in your init.ora file check the java pool size and if it is less than 50 MB, do increase it to 50 MB or larger (The higher the better.)
    Hope this helps,
    -Kishore
    null

  • How do I change the default bookmark name for my iWeb site?

    I'm not sure where the label is coming from that automatically appears as the bookmarked name for my iWeb site and I want to change it.

    I found my answer in the archived discussion "Bookmarking my site". It worked - thanks!

  • SLD: Adjust / Add logical system name for Business System [XI 3.0]

    Hi,
    In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
    I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
    Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
    Is there another possibility to add the logical system name to an exisiting business system?
    Regards
    Kristian

    In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
    After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
    Regards
    Stefan

Maybe you are looking for