Default swatch application - fill vs line?

Hi, normally when I select a swatch for an object the default was to apply it to the fill color.  I don't know why but it started applying a swatch when selected to the outline/stroke instead.
How can I change the default application of swatches back to the fill color?

in your tool pallette at the bottom you'll see a large icon for the fill and stroke. you'll see one is in front of the other. the one that is in front is the currently active one and if you were to choose a color or a swatch it will apply to that. if you click on the stroke icon, it will come to the front and if you click on the fill icon, it will come to the front. pressing X on the keyboard is a shortcut to switch back and forth between the 2.
also if you press shift+x, the attributes will swap fron one to the other. so if you have a white box with a black outline and press shift+x, you'll get a black box with a white outline.

Similar Messages

  • Error - Balancing Line Item Profit Center not filled in Line Item 007

    Hi
    I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
    Regards
    Vaibhav

    hi  vaibhav
    you go through this Tcode  FAGL3KEH  and maintain default profit centre. in the  error message system shown GL accounts
    hope you userstand
    thanks
    dharmendar

  • How do I disable Numbers as the default spreadsheet application?

    A couple of days ago I was opening a Microsoft Office Excel spreadsheet, as usual. Unexpectedly, the Numbers application launched without prompting, presented an introductory page (Welcome to Numbers etc.) then asked a question (which I unfortunately don't recall). I clicked on the button that seemed to lead me out of the program, but it did not. Instead, Numbers made itself the default spreadsheet application. I cannot find a way to "undefault" it. I know how to use "Open with" in the menu and can select xlsx of course, but when I try to download new spreadsheets they automatically download as Numbers spreadsheets. I don't want to disable the Numbers application completely, but I also don't want to learn a brand new application with all its ins and outs right now. I just want to get my work done in EXCEL!!!

    Anne,
    In Finder, navigate to one of your Excel documents. Select the Excel document, but don't open it. Then choose File > Get Info from the Finder menu line.
    In the Info pane, about half way down, in Open With:, select Excel and then click the Change All... button.
    Jerry

  • Xdg-default-chooser - Register default XDG application

    Hi archers.
    I have python-glued together xdg-mime and dzen2, so that when xdg-open hits an mimetype that is not associated,
    it fires up a dzen2 menu that allows user to choose between applications capable of handling this mimetype.
    I find it quite useful:).
    Improvement tips are welcome. Enjoy!
    #!/usr/bin/python
    # xdg-default-chooser
    # A simple script that fires up a dzen2 menu allowing user to
    # register default XDG application for a file passed as argv[1]
    # requires dzen2 to run
    # USAGE: setup environment variable BROWSER so that it points to xdg-default-chooser.py
    # This will cause xdg-open to launch xdg-default-chooser.py instead of attempting
    # to open file in a browser.
    # by shpelda at gmail dot com
    from os import environ,walk
    from os.path import join
    from re import sub
    from sys import argv
    from subprocess import check_output
    from tempfile import NamedTemporaryFile as tempfile
    def maxlen(array_of_string):
    mx=-1
    for x in array_of_string:
    if mx < len(x):
    mx=len(x)
    return mx
    entries=[]
    mime=check_output(["xdg-mime","query","filetype",argv[1]])
    mime=mime.decode('us-ascii').strip()
    mime=sub(r'([^;]*);.*',r'\1',mime)
    mime='%s'%mime
    for xdg_data in environ['XDG_DATA_DIRS'].split(':')\
    + [environ['XDG_DATA_HOME']]:
    for root, dirs, files in walk(xdg_data+'/applications'):
    for filename in files:
    if not filename.endswith('.desktop'):
    continue
    absfile=join(root, filename)
    with open(absfile) as f:
    for row in f:
    if row.startswith('MimeType'):
    if mime in row:
    entries.append(filename)
    entries.sort()
    result=None
    with tempfile() as w:
    w.write(bytes('%s\n'%mime,'us-ascii'))
    for e in entries:
    w.write(bytes('%s\n'%e,'us-ascii'))
    w.flush()
    # dzen2 -m -p -l 5 -e 'entertitle=uncollapse,grabkeys,grabmouse;button1=menuprint,exit;button4=scrollup;button5=scrolldown;'
    with open(w.name) as r:
    result=check_output(['dzen2','-m','-p','-l','%s'%len(entries)
    ,'-w','%s'%(maxlen(entries)*10)#FIXME magic
    ,'-e','entertitle=uncollapse,grabkeys,grabmouse;button1=menuprint,exit;button4=scrollup;button5=scrolldown;']
    ,stdin=r)
    if not result:
    raise "Nothing selected"
    result=result.decode('us-ascii').strip()
    check_output(['xdg-mime','default',result,mime])
    check_output(['xdg-open',argv[1]])
    Last edited by shpelda (2011-12-05 12:44:45)

    File "./xdg-chooser", line 28, in <module>
    mime=check_output(["xdg-mime","query","filetype",argv[1]])
    IndexError: list index out of range

  • Restoring Default Swatches?

    sometimes when i open a file the default fill and stroke swatches are empty (see attached image).  i suspect this is caused by the attributes of the file that is opened – for example, i just opened a PDF file in illustrator, which consists of only variantes of black text.  perhaps since it is not an Illustrator file it will not display the default color swatches.  is that correct?
    i've since saved the PDF as an Illustrator file and i would like to know how to restore the default swatches.
    i am aware that i can open swatch librarys and use the swatch panel, but this does not solve my issue.

    You are mpre or less correct. If you open a file that do not contain swatches such as an image raster file iit will not have the default swatches.
    What you do instead of opening that file is you create a new file and place the file you would have opened in that blank file, which will have default swatches by default.
    You  can also load the swatches from the default new document procile orr any documdnt that contains them.
    From the Swatch Panel flyout select Load Swatches then navigate to file that contains the swatches.

  • How can I set Yahoo mail as my default mail application on Mac Mail?

    I am trying to make Yahoo Mail (free version, not Yahoo mail Plus!) my default mail application. This would allow me to cick on any link sending e-mails and it will launch the yahoo mail application to send mail from there, obviously. For this to happen I need to open Mac "Mail > Preferences >" and choose "Default email reader" under the "General". I then choose the email application of my choice (Yahoo in my case). "GMail Notifier" for Google fans.
    I am not able to find a Yahoo application mail in my application folder or on the Internet, and frankly speaking, Yahoo mail support absolutely suck, and getting a hold of them is nearly impossible! There is a free applet out there called "Yahoomailer" that might do the job, but either I am installing it wrong since when I download and click on it nothing happens, or it does not work properly on my machine. So, I am turning to the community to get some help with this issue. All I need is to know if there is a Yahoo mail app out there that can be installed on MAC and shows up on my Mail > Preferences > Default email reader.
    Thank you,
    I am using MAC OS X 10.8.2

    My tools menu does not show "options" as a choice - any idea why? Thanks

  • Get Rid of 'Would You Like to make iCal Your default calendar application'

    Since installing the Plaxo 'helper' / Pref Pane - I now get the following message every time I launch iCal (and Address Book) ...
    'Would you like to make iCal your default calendar application?'
    Even when selecting 'Make Default' it still asks the next time. Is there a setting in com.apple.ical.plist (or similar) that controls this that I can look at, or is there a terminal command to try setting this another way?
    I'm bothered a) why I get this at all - suspect Plaxo b) why I can't just set this the once. Any help gratefully received.
    If it is Plaxo monitoring and then setting/changing a flag on the fly it's soon going to be heading for the trash....

    OK, here I am answering my own question... It turns out there's another Discussion which has the following solution:
    I had the same message pop-up. I quite iCal and then went to ~/Library/Preferences and trashed the apple.ical preference [plist]. After that, I re-launched iCal and checked the box in the message box and it took that time.
    I tried this... we'll see if it works for me.

  • FIRST TIME RUNNING THE DEFAULT BSP APPLICATION IN ABAP

    Hi BSP experts,
            I am happy to see many people are solving the problems on BSP in sdn.
    I am running the bsp application for the first time by taking the t-code se80 into consideration and executing the default bsp application given there.But I am getting the error   The URL http://nwrbcs:8000/sap/public/bsp/sap/system/login.htm was not called due to an error.The error is common as to all RABAX_STATE and in addressbar the address displayed is
    http://nwrbcs:8000/sap/public/bsp/sap/system/login.htm?sap-url=%2fsap%2fbc%2fbsp%2fsap%2ftutorial_1%2fdefault%2ehtm&sap-ffield_b64=c2FwLXNlc3Npb25jbWQ9b3Blbg==.
    Mainly my problem is i am not able to goto logon page.I am using the version Netweaver’04 to run this application.Are there any special prerequisites to run a bsp application.I had donwe some settings in t-code SICF all services are activated(subservices also) and in path /default_host/sap/bc/bsp rightclick display service in handler list tab I added CL_HTTP_EXT_BSP. In RZ10 I added the parameter icm\host_name_full (as I am using workgroup instead of domain in my system) for instance profile.In t-code SCICM status is running.
    If not clear with the above details I will send the screenshots of required t-codes and runtime errors to the mail-id immediately.
    But I am not able to retrieve the problem.Is it necessary to check any kernel updates.I don’t know more about that, I will send the required screenshots clearly to know all the details.I will send the trace file also if u need.It is very urgent for me to work on bsp but I can’t.If u r  familiar with particular version I will send that screenshots as I tried it in 4.7ee(R/3),ECC5.0(R/3) AND Netweaver’04(abap).I am getting different errors in all the three versions.pls go through this and help me.
        Helpful answer will be rewarded unfailed.

    you need to configure the FQDN. That is causing the issue in your case.
    the URL shd start something like abc.mycompany.com:port_number...
    Refer below thread & blog:
    /people/durairaj.athavanraja/blog/2005/08/21/running-your-first-bsp-application-in-sap-netweaver-04-abap-edition--nsp
    - step by steby link to configure the FQDN - Re: Unable to run any BSP application
    Raja T

  • Precompilation of JSPs for default web application

    Hello,
    Once in a while I need to redeploy my "Default" web application. I would like to have its all JSPs precompiled, so that it was immediatly available after redeployment.
    However, if I try to redeploy my web application (.war file) under, let's say, "DefaultWebApp" root context, using the administration console, with the "Precompile JSPs" option enabled, it does compile all JSPs, but ONLY those deployed under the "DefaultWebApp" root context.
    However, If I access a url like "http://somehost/SomeResource.jsp" (a file that belongs to that default web application"), I can see (due to a pause) that my JSPs have not been compiled under the root context.
    Is there any way to precompile JSPs for my default web applications?
    Sincerely,
    Sergei Batiuk.

    Hello,
    Once in a while I need to redeploy my "Default" web application. I would like to have its all JSPs precompiled, so that it was immediatly available after redeployment.
    However, if I try to redeploy my web application (.war file) under, let's say, "DefaultWebApp" root context, using the administration console, with the "Precompile JSPs" option enabled, it does compile all JSPs, but ONLY those deployed under the "DefaultWebApp" root context.
    However, If I access a url like "http://somehost/SomeResource.jsp" (a file that belongs to that default web application"), I can see (due to a pause) that my JSPs have not been compiled under the root context.
    Is there any way to precompile JSPs for my default web applications?
    Sincerely,
    Sergei Batiuk.

  • Office documents does not open in the default office application from Search Results

    1 WFE + 1 App Server + 1 server for OWA + 1 separate DB server make up our DEV SharePoint 2013 environment. We migrated many web applications from our SP 2010 environment to SP 2013 environment. Client integration is enabled and "Open
    Documents in Client Applications by Default" feature is enabled at the site collection level. OWA is enabled and working on the search results, such as showing preview.
    From the document libraries, if I open office documents like word, excel and PowerPoint, they open in the respective office applications. However, from the search results, when I try to open by clicking on the result, it opens on the browser.  I want
    OWA to show document preview but still want to open the document in the default office application. How to overcome this?
    I have IE 8.
    Thanks, Soumya | MCITP, SharePoint 2010

    Go to the bottom of the Search page, you will see a Preferences link:
    From there, you can set your preference. This is a per-user setting and as far as I'm aware, cannot be set globally.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How do you change default swatches?

    Where is the default color swatches file located for Photoshop CS6? I'm tired of constantly deleting dozens of useless swatches; I want Photoshop to start with a blank Swatches palette every time.

    Photoshop loads the last used swatches by default when it loads.
    If you want a blank swatch palette, follow instructions here http://help.adobe.com/en_US/photoshop/cs/using/WSb2031e05d0354a70-1a6fe757133ae6e6508-8000 .html and empty out your default swatches, click on Fly-out menu > Save Swatches > Give a name for your 'Blank swatch'. Close Photoshop.
    The next time you open Photoshop, you'll only see the 'Blank Swatch' that you had saved earlier unless you append/ change the swatches in your workflow and quit photoshop with the available swatch panel.

  • How to disable pop up Make Adobe Reader my default PDF Application in registry

    Hi
    I am wondering if there is a registry setting that can disable the pop-up Make Adobe Reader my default PDF Application ?
    I have seen there is a setting under Edit\Preferences\General\"Tell me if Adobe Reader is not my default PDF Application" but cannot find a registry setting to disable this. This message pops up for some users in a remote desktop session host environment even though I have disabled the messages on the session hosts.
    Thanks,
    Andrew

    Hi Andrew_Dell,
    Thank You for posting on the forums. Kindly try the below mentioned steps and check ,if it helps.
    1) launch adobe Reader
    2) Click on Edit>Preferences
    3)Go to General under Categories
    4) Click on "Select Default Pdf Handler"
    5) Choose adobe Reader
    After performing this workflow, you might see an installation window. do not worry, it is just a new configuration of PDF handler being updated in the system.
    Thanks,
    Vikrantt Singh

  • Default swatch palette?

    Upon opening a new document in RGB mode in Illustrator CS4, I'm greeted by the Default CMYK swatches palette. Where do I switch the settings to launch the Default RGB palette as the default swatches menu? Thanks!

    O.K.... I think I figured it out. It seems what I should do is choose Basic RGB from the dropdown menu in New Document window. When I make changes, such as Raster Effects or Size, the status becomes [Custom] but the Default RGB palette launches upon opening. I must have previously been modifying a Basic CMYK document to RGB color mode in the New Doc window thinking Custom was Custom was Custom You get the idea... Thanks for the help!

  • Default Web Application - new bug in SP1?

    Just rebuilding everything from scratch to test out SP1. Have noticed
    that the admin console now always seems to report only "(none)" in the
    Default Web Application drop-down, even if other web apps are deployed
    to the server. Editing the config.xml directly detours the problem, in
    that the default app can be set and used, but the admin console still
    says "(none)".
    Lots of other good things fixed in SP1 though!
    Chris

    What you can do if you may shutdown the server is to replace the
    console.war from WLS6.0SP1 with that from WLS6.0, do the mods and put
    the new back in place. If you may stop the server, this is I think the
    easiest sollution.
    Regards,
    Merg
    "Rich " <[email protected]> wrote in message
    news:3ad33260$[email protected]..
    >
    Is there a fix for this issue, or a work around? I am having adifficult time
    getting the web application to show up...and be accessible in abrowser.
    >
    Thanks.
    Chris Palmer <[email protected]> wrote:
    Just rebuilding everything from scratch to test out SP1. Have noticed
    that the admin console now always seems to report only "(none)" in
    the
    Default Web Application drop-down, even if other web apps aredeployed
    to the server. Editing the config.xml directly detours the problem,in
    that the default app can be set and used, but the admin console still
    says "(none)".
    Lots of other good things fixed in SP1 though!
    Chris

  • Default Web Application is not visible in Weblogic Console

    We are using Weblogic 5.1.0 SP7
              We moved our Application from the Implicitly Defined Default Web
              Application which is configurated by the
              weblogic properties to a Web Application. Because we don't want to
              change any URL in our Application, we
              decided to deploy it as Explicitly Defined Default Web Application.
              By this we recordniced that the weblogic.httpd.defaultWebApp property
              worked not that way descibed in the
              Weblogic Documentation. You have to write the path to the WebApp not the
              name!
              So we have the following Entry in the weblogic.properties:
              weblogic.httpd.defaultWebApp=i:/if_home2/web
              This works fine. The Server starts and serves the WebApp the way we
              expected. But wenn we start the Weblogic
              Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
              applications" folder. This one is empty
              now! Previously the "General" Entry for the Implicitly Defined Default
              Web Application was shown here, which
              showed our Servlets and JSP's and their hit count and parameters.
              So there is no chance to monitor the Servlets and JSP's of the default
              Web Application.
              I tried to deploy our WebApp a secound time with
              weblogic.httpd.webApp.OurApp=i:/if_home2/web
              but this create a second independent WebApp. OurApp is shown in the
              Weblogic Console but it does not monitor
              the hits to the default WebApp. So this is not a solution!
              Any idea to make the default Web Application visible in the Weblogic
              Console?
              

    in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
    Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
    I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
    As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
    please tell me what could be another workaround. 
     

Maybe you are looking for