Default system names for several RFCs in a WebDynpro project

Hi , I have a doubt, currently I am adding several RFCs to a WebDynpro project , all of them with the same "Default system logical name" for model instances and RFC metadata..
It is ok to give the same "default system logical name" for all my RFCs" or should I give a different name for each RFC I add to my project ?
Which way do you recommend to configure all RFCs in my project?
Thanks in advance....

Hi ,
check the below link reg Effective Web Dynpro - Adaptive RFC Models , hope it will help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11c3b051-0401-0010-fe9a-9eabd9c216de
Regards,
Sunitha Hari

Similar Messages

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • System name for alias GD4_500 not found in portal

    Hi people,
    I want to launch a query from analyzer, but i have the next error message "System name for alias GD4_500 not found in portal".
    What can i do??
    More thanks

    Read,
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/93ed3d72fe4b5ae10000000a11405a/content.htm
    Regards
    Juan

  • Same logical system name for two productive systems - BW, PI issues

    Dear all,
    we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
    There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
    As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
    However as far as I know:
    - we cannot connect systems with same logical system name to BW,PI
    - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
    How can we overcome the problem?
    Please advice.

    > However as far as I know:
    > - we cannot connect systems with same logical system name to BW,PI
    > - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
    Right.
    > How can we overcome the problem?
    Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
    Markus

  • Giving logical system name for PI 7.11 system

    Hi,
    how can i give logical system name for PI 7.11?
    Thanks.

    Check if this helps http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/frameset.htm
    if you are loking for naming conventing : use  CLNT{client no.} eg: PIDCLNT001
    Regards,
    Srinivas

  • Logical system name for this BI is not allowed

    Working under Data Warehouse Workbench, when I click BI Content button, I get pop-up: "Logical system name for this BI is not allowed". Then I get three options from NW system: "Create",  "Assign" or "Cancel".
    What can I do? How to create a new Logical System?
    Thanks,
    Mike

    Refer this link to create a Logical System...
    http://help.sap.com/saphelp_nw70/helpdata/en/aa/b4b13b00ae793be10000000a11402f/content.htm

  • "Untitled" as default document name for new documents

    I have one installation of Adobe Illustrator CS2 in a Mac with which I have the following problem:
    Whenever I go to File->New, to create a new document, the default document name is blank, and it should be "untitled".
    Is there a way (without reinstalling) to correct this? (turn the default blank document name to "untitled" default document name, for new documents)
    Thank you.
    Juan Poniachik

    On what Mac? If it's on a new Mac with Snow Leopard, I would guess it is one of those compatibility issues of new OS vs. legacy software. If so, you can't change any of that. Other than that I can only think of trying to edit the document templates...
    Mylenium

  • Default caller name for a given phone number

    If you have multiple contacts that have a phone number in common, is it possible to decide which of those contacts is the default display name for that number?
    For example, I have an entry for my wife. I also have an entry for "ICE" (In Case of Emergency). They're essentially the same. When my wife calls or texts me, the display says "ICE." I want it to say "Wife."
    Is this possible?

    Nope.
    BTW, I am curious, do you have a passcode lock on your phone? If so, doesn't that pretty much make any ICE contact pointless since they cannot access the phone?
    Understand your desire to have it there though. Also, there are apps out there (think called ICE) that can let you put a icon on your screen that says ICE and then link that to a number.
    Message was edited by: DaVBMan

  • Default Last name for Spouse in Family infotype 0021

    Hi,
    We have a requirement and wondering somebody could help me with that:
    when ever we maintain the Family infotype 0021 - If the person is married the spouse last name is automatically populating in the last name field. Is there any functionality which would allow the last name of the female spouse come in as blank as it is not standard for the last name to be same as husband.
    Regards,
    Raghu

    Hello there,
    Looks like defaulting last name is standard behavior in different countries specifics:
    Note 1001323 - Defaulting of Last name in IT0021 (Family/Related Person)
    [https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1001323]
    Note 1083523 - Defaulting Last name in IT0021
    [https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083523]
    Note 625670 - MASTER DATA: Default family name for all IT0021 subtypes
    [https://websmp130.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=625670]
    MP002120     35     IF P0021-FANAM EQ SPACE AND PSYST-IOPER EQ 'INS'.    "note 1083523       
                   36       MOVE P0002-NACHN TO P0021-FANAM.                                       
    MP00212R     50    IF P0021-FANAM EQ SPACE AND PSYST-IOPER EQ INSERT.      "JM#1001323  
                   51       MOVE P0002-NACHN TO P0021-FANAM.
    So if you wish, you can overwrite this according to sandbisw1983 instructions.
    Greetz.

  • Default logical system names for application and metadata in models.

    hi,
    I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
    how do we change them and re import after changing? in abap we cant change our code in test and prod systems right  so how is it in web dynpro java ?
    thanks

    Hi Jeschael,
    thanks for the reponse.
    When I create the model, I give the default logical system names and on the next screen I give the
    ip address of the backend system, client , login, password etc
    Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
    thanks
    B

  • Logical system name for acknowledgement in BPM

    Hi,
    I have a szenario:
    IDOC --> BPM --> MAIL
    Inside BPM I check the message and depending on an xml-element I stop the process or I send the message by mail.
    When I stop the process the BPM sends back an acknowledgement and in SXMB_MONI I can see an error of the acknowledgement:
    "Sender Test_BPM_IDOC_TO_MAIL kann nicht in ein ALE Logisches System umgeschlüsselt werden" (Sender can not convert in a ALE logical system)
    What can I do?
    Possible Solution 1:
    I can define my BPM "Test_BPM_IDOC_TO_MAIL" as a logical system (including WE20 for ALEAUD).
    Possible Solution 2:
    I can enter an existing logical system name in the "adapter specific attributes".
    BUT it is not use the same logical system name twice (BAD ... or is there a workaround?
    Is Solution 1) a common way?
    Thanx
    Regards
    Wolfgang Hummel

    Hi,
    there are many ways:
    some for aleaud are described in my book:
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    >>>>Is Solution 1) a common way?
    no this is not good a good idea
    BTW
    you can also supress aleaud raport IDX_NOALE
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Can you create a different default Opportunity name for Lead conversion?

    We're using CRMOD for a high-volume call center and we end up with leads with the same name. According to the online help, "The First Name and Last Name for the lead appear in the Opportunity Name field by default." That's working correctly, but it would make our lives easier if it did something different, like maybe First Name, Last Name, and ZIP code, or First Name, Last Name, and a Timestamp. Is there a way to do that? I realize the users could do something manually, but then I get all the associated issues.

    I'm not quite sure how that would work. I attempted this in staging using [<AccountName>]+" "+[<AccountLocation>], and I checked the Post Default box. When I go to convert a Lead, it still defaults to First Name and Last Name on the Convert Lead screen.

  • SLD: Adjust / Add logical system name for Business System [XI 3.0]

    Hi,
    In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
    I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
    Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
    Is there another possibility to add the logical system name to an exisiting business system?
    Regards
    Kristian

    In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
    After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
    Regards
    Stefan

  • Defining Logical System name for ALE using T.C- SPRO?

    Hi,
    Can anybody tell, how to define logical system name using T.C SPRO?
    Where can I find the "Define Logical System for ALE"?
    Thanks
    Balaji

    HI,
    Use the SALE transaction , there you can have all steps clearly,
    please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
    Regards
    Chilla..

  • Incorrect logical system name for datasources - entry not in TADIR

    Hi all,
    I currently can't replicate or edit any of my data sources because, after we applied some patches, the logical system name appears to be incorrect and a message is displayed saying the R3TR RSDS entry does not exist in table TADIR.
    For example:
    Object directory entry R3TR RSDS 0EMPLOYEE_0016_ATTR           R3DEV does not exist.
    That's correct, because all entries exist for my actual source system CD1CLNT175, not for SAP standard R3DEV.
    Does anybody have any idea how I can update my source system configuration/mapping? I've looked on the forum but couldn't
    find a clear cut answer.
    Thanks a lot!
    Markus

    Hi all,
    I think the solution lies in SAP note 1604726 "DataSources with package assignment cannot be activated"
    1. When you access the change transaction RSDS, the system issues error message TK 753 "Object directory entry R3TR ... does not exist" twice.
    2. When you try to activate the DataSource, the system issues error message TK 425 "Invalid call sequence for interfaces when recording changes".
    My message is TK753.. and before that I receive TK425, I guess we have to apply SP28... time for Mario and Luigi to apply some pizzas... ehmm patches...!
    I will let you know if that solved the problem, thanks for your help guys!
    Markus

Maybe you are looking for