Default tab in Business Partner
Hi,
How can we change the default tab in the business partner specific to a role.
Thanks
Surender
Hi Vikash,
Tried in BUPT, BUSD - Bp roles, could not find a way to change the default tab. Tried in Cross application components, BP-field groupings also but no luck. The only way i can think is any field which is 1st in the tab sequence in the VCT screen configuration is defaulted, so can we change the default in any other way.
Thank You
Surender
Similar Messages
-
How to add a New Tab in Business Partner Transaction
Hi Friends,
Please help me out to "How to add a new Tab in Business Partner Transaction?
Regards,
RickyHi Rajendra,
It will be gratefull to have some EEWB docuement.Can you please forward me ?
Regards,
Ricky
Edited by: Ricky Maheshwari on Dec 21, 2009 6:51 PM -
Hiding a field in Address tab of Business Partner Using BDT
Hi,
I want to Hide the title field in the Business Partner transaction, which exists in the Address Tab using BDT.
Could you please let me know whether i need to create a custom screen for this or is there any other way where we can modify the predefined screen directly?
Kindly help me regarding.
Thanks and Regards,
Gopi.Hi Gopinath,
Please go through this link..,
http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/696d360856e808e10000009b38f839/frameset.htm
This is the introduction regarding BDT ( Business Data Toolset)
Here you will find some information, I think it may help you.
Cheers,
Swamy Kunche -
Any opinions on setting default values on Business Partner level?
Hi All,
I do not have a question, but would like to have a good discussion on how you should preferably be setting default values on a business partner and it's assignment blocks.
In my opinion you have two main alternatives:
1. The "old fashioned" way by using the get_<attribute_name> method and doing some checks for the perticular attribute in the context node.
2. Using the Badi BADI_CRM_BP_UIU_DEFAULTS to fill fields with a default value. With some enhancements on the assignment blocks (making typed_context attribute public and, when not called yet, calling the badi) you can use the badi for all assignment blocks.
Because I discovered via debugging that in the, by many forums suggested, badi code a programm error/exception is used so that the default values are only set during creation mode, I started doubting to use the badi. Because once I had set my data declarations to the right references and the exception did not occur anymore, suddenly it always fills the values even when there are already values filled. So additional checks are needed to assure that I am in creation mode.
Although I like the use of the badi, because all my default values on the whole business partner object can be found in the same place, it is getting a bit strange to: first still enhance the view and context node class, adjust the visibility of the typed_context, call the badi and do all kind of checks to assure that you are in the right view/context node, where this all is faster and more lean and mean when done directly in the get_<attribute_name> method on a context node.
Anyone who wants to give there opinion on this?
Regards,
Martijn.Cameron,
Unfortunately you cannot pass the Account and Contact name before saving the record. Post default tries to capture the name just before the record gets saved, but as the record is yet to be created, the relationship wont exist and only the respective id fields will have values. If you try using account id/ contact id it will work else just pass the time stamp in the name field which will make sure there is some value when the record is saved. later in the back end you might need WS to update the field values. -
Dump in Condition tab in Business partner
Hello,
I am trying to create a business partner in the role sold to party in transaction BP, in CRM.
Now, when i go on to enter the details in general data, and click on the condition tab, the system throws a dump.
Below is the message:
Termination occurred in the ABAP program "CL_OS_TRANSACTION=============CP" -
in "EXCEPTION_RAISER".
The main program was "SAPLBUPA_DIALOG_JOEL ".
In the source code you have the termination point in line 78
of the (Include) program "CL_OS_TRANSACTION=============CM00D".
when 4.
The top transaction could not be ended in compatibility mode
(External Commit). There are no means to inform the calling
application that its COMMIT WORK failed because the Object
Services top transaction failed.
raise OS_COMMIT_TOP_FAILED.
endcase. "I_EXCEPTION_TYPE
endmethod. "EXCEPTION_RAISER
Kindly help me to solve this issue.
Regards
AryaI am closing the topic....the issue got solved on its own by upgrading the enhancement package.
Regards
Arya -
Tabs in Business Partner Master Data
One customer of us demands some changes within the Business One.
The support in Ireland advised us to post this requirements in this Forum.
There are 8 Tabs within the Business Partner Master Data.
But if you open the Master Data and try to search for the city for example, this is not possible, because three tabs are missing in search mode.Hi Kiran,
Can you post the query here, which you used in fromatted search.
I believe you mean to say that by this formatted search, user will have flexibility to choose the field and enter the search value.
thanks in advance,
Samir Gandhi -
Add new folder/tab into business partner master data form
Hi, All
Please show code example: Add folder/tab "business partner master data" form
add tab folder into "Accounting" this sub folder "General", "Tax", "Example Folder" <=
Thank you
MdiawWelcome to the forums; this has been covered in lots of posts here so if you do a search you will find lots of replies:
e.g
Re: Adding subFolders under a Main Folder
or
Add new tabbed page
or
Re: Folder within Folder
or many other returned by searching for "add folder" -
BAPI for document tab of business partner
In Business Partner we have Documents tab. At document tab We can attach some URL
or some document. Please tell me the BAPI for this functionality.Hi Anupam,
FM SKWV_KWUI_DOC_CREATE requires PACKAGE_ID as mandatory Import Parameter. Do you know how to determine its' value and what does this parameter represent?
Thank you in advance,
Maro -
Adding a additonal TAB in Business partner Overview ( Tr : FMCACOV)
Dear Experts,
I am working ECC6.0 system.I have to add a additional TAB in a TABstrip for a screen (FMCACOV:Business partner overview).
The Program for the transaction is RFMCA_COV. Please let me know the steps to proceed for these.
Thanks in Advance.
Regards,
SudhiraHello,
The following MAY be useful to you.
https://www.****************/Tutorials/ABAP/Tabstrips/Selectionscreen.htm
Rgds
Rajendra -
Collection Specialist - Collections Profile Tab of Business Partner.
Hi,
We are using the SAP FSCM Collections Management module. When I assign the collection profile to the Business Partner on the Collections Profile Tab, the Collection Segment, Collection Group are populated based on the configuration but the Collections Specialist does not get populated.
Can someone please throw some light on this if they have experienced this issue?
Thanks & Regards,
Bhairav Naik.Hello Mark , actually I dont think that is possible to transfer data related to collection profile (displayed in BP master data for a BP with colletion managemnt role) from Cusotmer master data because this kind of information are not availabe as my knowledge in Cusotmer master
Solution could to transfer all other available data from Cusotmer data to BP and once transferred update mannually the collection profile.
I have seen also a program ( transaction UDM_BP_PROF) to update collection profile automatically, but I did not manage to make it work on a exidting BP.
What do you think about this approach? -
How can i add new tab in Business Partner
hi every body,
Present i am working on SAP CRM 3.0 version. i need to add new tab in BP. Here EEWB not available. How can i add new tab?Hi babu,
you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
i hope this is helpful
Rewards points if helpful
Thanks®ards
kishore kumar -
Reconciliation account is not defaulting in the business partner screen
Hi,
I am working for IS-H Implementation Project right now. I am facing issue FI customer is not created during business partner creation. The error message appeared when I am trying to create business partner is "Required field Reconciliation acct has no entry".
When I checked in the system parameters, for parameter AKTO_FR is maintained in the system. I tried to find any OSS notes related to this issue, but I can not find it.
Anyone can help this issue ?
Regards,
OscarHi !
Check whether you have configured the “Application Parameters” (ONK5).
Make sure that you maintain reconciliation account for the following parameter values,
AKTO_KTR -
Customer reconciliation account - insurance providers
AKTO_SZ -
Customer reconciliation account - patients
Regards
Subash Sankar -
Credit Segment Data Tab in Business partner master data
Hi
I have a situation where i am able to create Business partners from the Existing customers in ECC 6.0.
For Credit management, when i am in UKM000 role i am unable to see Credit segment Data tab. Do i need to activate this any where?
Your input is appreciated.
Thanks in advance.Hi Kiran,
Can you post the query here, which you used in fromatted search.
I believe you mean to say that by this formatted search, user will have flexibility to choose the field and enter the search value.
thanks in advance,
Samir Gandhi -
Making Visible-False to Business Partner's Tabs
Dear ALL
I Would like to disable some tabs in Business Partner ,how ever am able to do it but when i navigate ,disabled fields are blinking and showing and finally it comes to disabled position but how ever i have put freeze(False),Please provide a solution ASAP
Regards
ZubairHI,
itemevent and menuevent can handle this
itemevent
If pVal.FormTypeEx = "134" Then
If pVal.EventType = BoEventTypes.et_FORM_LOAD And pVal.BeforeAction = False Then
Dim oBpForm As SAPbouiCOM.Form = sbo_application.Forms.GetForm(pVal.FormTypeEx, pVal.FormTypeCount)
oBpForm.Items.Item("4").visible = false
End If
End If
menuevent
If pVal.BeforeAction = False Then
If sbo_application.Forms.ActiveForm.TypeEx = "134" Then
Dim oBpForm As SAPbouiCOM.Form = sbo_application.Forms.ActiveForm
oBpForm.Items.Item("4").Visible = False
End If
End If
it is always works....
regards,
J. -
New relationship category for business partner
I want to create a new relationship category for the business partner. Could anybody guide on this, how to create?
--hariHi Karunakar,
I went to transaction BUMR and created the new relationship category. I can see this in the SPRO -> cross application components -> SAP business partner -> BP Relationships -> Properties of relationship categories.
Go to BUMR -> Relationship Control -> Relationship Categories (BUBA)
I have copied the existing contact person relationship as my new relationship category
But it is not visible when I went to relationships tab in business partner.
Any ideas?
Thanks
--hari
Maybe you are looking for
-
Different GL needs to pickup when we do PGI for specific Customers
Hi Team, our client is looking for scenario as below. when we do the PGI system will pickup the GL's from the OBYC settings based on the condition. i.e COGS 123 a/c DR inventory A/c for all scenarios. now client is expecting when i creat SO
-
The app store no longer works since iOS 5.1 update?
Ever since I did the most recent iOS Update for my iPod Touch 4G (purchased Dec 2010), the app store no longer works. I know for a fact it is NOT a billing problem with missmatched security code on my credit card. I had that before and resolved it. T
-
Adding 9971 and 8961 - Not Showing up in CUCM
System version: 7.1.3.30000-1 Trying to add the 8961 and 9971 phones. Have uploaded the default phone loads, but they are not showing up. Am I missing something?
-
While forcing the install of the device software in an attempt to get my phone working again, a pop up box came up that said "Application loader cannot connect to this device. Please reconnect device and if prompted, enter password". I am confused be
-
How to disable iMessage for an old Apple ID which is only used for AppStore?
How to disable iMessage for an old Apple ID which is only used for AppStore? I used my old Apple ID for iMessage and AppStore Apps. Now I'm using my iCloud Account (second Apple ID) on my Mac as iCloud and iMessage Account. New Apple ID - iCloud & iM