Default Tab settings in Text:Show Ruler Menu

How can I change the default number of tabs and their positions when using the Text menu in an application developed with Interface Builder and XCode?

In IB, select the NSTextView area, enter some text (a single character seems to do), set the new default tabs with Format:Text:Show Ruler and save the nib file with the new tab defaults.

Similar Messages

What are the default font settings for 7.0.1 I have messed with them a bit and now my text is blotchy. I want to start clean.

I tried to adjust font settings to a font that I prefer and a size I can read. It was all kind of messed up so I searched what the default settings should be to start at ground zero again which I found but now it is worse. The main issue is that text is blotchy, dark some places, light another. Monitor is new so it's not issue. What exactly are the Default settings for 7.0.1 I'm not sure mine are correct ??? What other things can I look at if the default doesn't improve everything? I have Windows 7 and turning clear text on or help has no effect. PLEASE HELP ???

You can see the defaults in a screenshot in this KB article:
* https://support.mozilla.com/kb/Some+text+shows+up+bold+after+upgrade
You can check the font setting in: Tools > Options > Content : Fonts & Colors > Advanced
Default Font: Times New Roman (16)
Fonts for : Western
Proportional: Serif (16)
Serif : Times New Roman
Sans-serif : Arial
Monospace : Courier New (13)
[X] "Allow pages to choose their own fonts, instead of my selections above"
Are there any problems reported in the Graphics section at the bottom of the Help > Troubleshooting Information page?
If you have an ATI graphics display try to disable "Morphological Filtering" in the Catalyst display driver:
* Catalyst Control Center > 3D Settings > Disable Morphological Filtering
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

20.0.1 Update: right-click on page shows ALL menu options, many (all?) don't work, no "view page source", no "open in new tab"

after update to 20.0.1 a few hours ago, right click shows ALL menu options, many (all?) don't work, like "view page source", "open in new tab" etc. etc.

I'm having the same issue on Firebug 1.11.3....The "more robust" right click menu does return when I disable the extension. Would you recommend downgrading Firebug to 1.11.2? Hate to have to turn off Firebug "except when I'm working" but either option seems to have both pros/cons.
This behavior happens on both PC and Mac (although the above information was tested on my PC - I'll have to check the Mac later and see if Firebug is doing the same thing there. I believe I have the most recent Firebug there, too)
The PC is on Firefox 20.0.1, Mac should be as well.
Thanks

I have a iPad mini, I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
Try the link above. Try to find a phone number for your country, call and ask for account security.

Firefox 21 does not show start menu and taskbar sub-links of new tab,private window

Firefox does not show start menu icon 's submenu containing links to new tab,new window and new private window.Same happens with taskbar pinned shortcut. It does not show the above three options when I right click on it. I have installed Firefox stable,beta,aurora and nightly at the same time.All the four use different profiles.I have this setup since Firefox 12.There was no problem before v21.I tried reinstalling all the four.Resetting the stable version profile.The options do appear in othe ruser accounts.I want this option for stable version only.I think these are not available for testing versions.I tried all the suggestions in this thread:
https://support.mozilla.org/en-US/questions/943198
I am on Windows 7 64 bit.

You may be experiencing this Windows 7 bug:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=870529 bug 870529] - Windows jumplist not showing anymore
Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html

Tab Settings, Show tabs at right or left...!!!

Hi, the new monitors of pc are wide screens, the high is less than wide. I will need to put the tabs of the open pdfs at right or left side of the view-screen. I don't like to reduce the high of the view-screen. The toolbars are easy to doc (place) at right or left side of the view-screen. Have you got any solution ?
Farther more, when I read only one pdf, I don't like to view a single tab. I think, it is too much and the view-screen is reduced without any reason.
I use the Adobe Reader version 9.1.4 under of ubuntu 10.10 (maverik) kernel 2.6.35-24-generic.
Thanks.

You could use the "Panorama/Group Tabs" ([[What are Tab Groups?]]) feature to sort your tabs into different groups in order to have the more organized. For the most frequently used sites you can use "AppTabs"([[What are App Tabs?)]] Or you could simply close some of the rarely used tabs (Maybe save them as a Bookmark ([[How do I use bookmarks?]]) to find them again later).
But this doesn't really solve the problem. First I have to ask if you are using "Tabs on top"? (On the menu bar, click on the View menu, go down to Toolbars and tell me whether "Tabs on Top" is checked or not). Then: How many tabs do you have? Firefox does only show the vertical scrolling arrows when they are needed. How many tabs you can have without the arrows appearing depends on the width of your window, so could you please make a screenshot of your Firefox window and upload it here? If you don't know how to take screenshots: [[Adding screenshots]] (just follow steps 2 to 8) and then add it blow your post . :)

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

Paragraph Indents vs Tab Settings

Trying to format a book length document using paragraph styles. So far, so good.
I've made separate styles for 'chapter body text - first paragraph,' and 'chapter body text.'
I'd like regular 'chapter body text' to be indented by, say, 0.25".
Question is, do I use Paragraph Indents or Tab Settings to achieve this?
Paragraph Indents seems to work, but I don't really know what Tab Settings are, and haven't been able to determine their behaviour by experiment.
thanks,

Hi SSS,
Your paragraph indent is the way to go! Keep with it.
Tabs: You might find View > Show Rulers helpful. To add a tab stop, click on the ruler. In this screenshot, there is a tab stop (blue right pointing triangle) at 1 cm in from the left indent (blue down arrow) on the ruler.
The Tab stop will align a Tab character typed from the keyboard. You can have several tabs stops per line.
Another way to add a tab stop:
Inspector > Text > Tabs > Tab Stops and click on the + button. The screenshot shows there is a left tab stop at 1 cm. You can double click to edit the position, or drag the Tab Stop on the ruler.
Page 94 of the Pages'09 User Guide: Setting Tab Stops to Align Text.
Download the Guide from the Help Menu in Pages.
Regards,
Ian

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

How do you get rid of default tabs on a document in pages 09?I h

Hi.
I am wanting just one tab on my document, but there are many popping up that I believe are default tabs. I am trying to delete them in inspector but it is not letting me. Any tips???
Thanks!

Select the text you want to apply your tab to and set the tab on the ruler by clicking on it.
In the absence of any specified tabs the tabs will jump to set intervals on the ruler.
Peter

Set Default Tab For A Step

We have a system that has been installed at a couple of affiliate sites in Japan and Romania (we've been developing in Australia). It runs on TestStand 4.2 with supporting code written in LabVIEW 8.6 (although the Romanian site uses TS4.2.1 and LV2010). We have numerous custom steps in a types palette file.
One of the sites has complained that when they add some specific steps (custom Numeric Limit Tests, in particular) to a sequence, the tab shown in the Step Settings pane is the "Limits" tab. It would be more convenient and more useful to show the Edit tab (the one that shows the buttons for the Edit sub-steps).
I realise it's just a matter of clicking on the relevant tab. I also realise that once a file is saved, the last-selected tab is shown for each step when it's re-opened. However, the customer is always right, so I need to see if it can be "fixed".
Is there a way of setting the default tab for a custom Numeric Limit Test step to something other than the "Limits" tab?
Help files, Google and the NI pages don't seem to be forthcoming on this issue.
Thanks,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge
Solved!
Go to Solution.

Thanks Rohama,
I will mark the issue as "not fixable" and be done with it.
Regards,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge

How to set "Date Modified" as default tab in Open File window

Photoshop CS5.1
When I click on Open File, the window that comes up has several default columns (FileName, Date, Size, etc).
I can right-click on the tab bar and add "Date Modified" to the tabs, but I would like to have "Date Modified" be a default column whenever I open the file selector (and no matter which folder I open up).
I cannot find a way to do this. I want to know the last date I modified a file, not when it was created.
Is there a way to universally set this column as a default?

Date modified always shows for me in Details view.
I believe what columns are showing has to do with what columns you've set in Windows Explorer...
Here's an excerpt paraphrased from my Configure the Windows 7 "To Work" Options book that may cover what you need:
Open Windows Explorer...
Navigate to a folder of the type you want to see (e.g., one containing your Photoshop images) and set Details view.
Make the window look the way you'd like future Explorer windows to look. Reorganize Details view columns, e.g., to Name, Size, Type, Date Created, Date Modified, Attributes, etc. and size them so they fit.
Choose Tools - Folder options, then click the View tab.
Click [ Apply to Folders ] to apply the above settings to all folders.
[ OK ] to exit.
Hope this helps.
If the Date modified still doesn't stick for you, there are some other things I've done (and documented) to tweak the configuration of my systems that may help make my seeing the columns being set as shown in the attached image when I choose File - Open in Photoshop.
-Noel

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

Default font size for Text screen in customer document

We use the text function to enter additional customer data for customer invoice correspondence. The data is pasted from a Word document onto an existing invoice document using menu Extras - Texts - select Correspondence then paste.
Once pasted the tab funstion is used to line up the data.
The default font within the 'Text' screen is different from the default font used in the correspondence. This causes a misalighnment of the text when printing the invoice.
How do I change the default font size in the 'Text' screen. This is probably more of a techie than functional uestion. The SAP screen is SAPLSTXX (via either FB03 or FBl5N)

ABAP

Default tab in sapscript

Hi ABAP Gurus,
How do you set the default tab in SAPSCRIPT?
I need to put a tab prior to the item text (or to this statement):
/: INCLUDE &RT_NAME& OBJECT EKPO ID F01 LANGUAGE EN
I went to SE71>header>basic settings
then i added a certain value at "Tab Stop"; Unfortunately, when i tested the form. The "tab" was not implemented.
Thanks in advance. Points will be given...
Best Regards.
Brando

Hi,
You can put the Default paragraph fprmat in the SAPSCRIPT, then inside the paragraph format, maintain the TAB so that this will become defalut TAN for that SAPSCRIPT
Regards
Sudheer

Default Tab settings in Text:Show Ruler Menu

Similar Messages

Maybe you are looking for