Default Tabs - Beware, I'm a Beginner :-)

Hello everyone, as the title suggests, I am very much a
beginner at the SPRY menus, so please bear with me.
I have implemented a tabbed panel in my website, however,
when I click on a link, it sets the menu back to the first tab,
rather than the tab of the topic i am in.
As an example. Please see
http://www.fitzroyreds.com.au
Click on "Our History", and then the link to "Fitzroy Reds
History".
At this point it takes me to right page (I got that bit
right), but the menu returns to the first tab, when i would have
expected "Our History" to remain highlighted.
Is there something in the .css, or the .js file that i need
to ammend ? The only reference to panels allows you to change the
default, but not necessarily to the current one.
I'd really appreciate a bit of guidance here.
Cheers
Mappa

Mappa01 wrote:
> Hello everyone, as the title suggests, I am very much a
beginner at the SPRY
> menus, so please bear with me.
>
> I have implemented a tabbed panel in my website,
however, when I click on a
> link, it sets the menu back to the first tab, rather
than the tab of the topic
> i am in.
Yes, this is what is supposed to happen, unless you "tell"
the tabs differently. Take a read up on this page:
http://foundationphp.com/tutorials/spry_url_utils.php
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Similar Messages

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Set as default tab doesn't save

Because it shows the name of the last poster, I would prefer to have Overview as the default view for forums I visit. (I would hope that the names of the OP and last poster will be reinstated as soon as possible for all page views. As many others have already mentioned, this is very useful information to have.)
For some reason, only in 10.4 Tiger does Overview remain as the default. (And, I don't remember even having to use Set as default tab for the Tiger forum to remain in Overview. It has just always appeared that way.) With any of the other forums I frequent, even if I click on Set as default tab for Overview, if I leave that forum and return it always reverts to Discussions view. It doesn't save that view.
In addition, Set as default tab doesn't even appear as an option for several of the forums I visit.
Is this a bug, or do I need to know something about making the save work?
Unless it's some setting I'm missing on the Personalize/Widgets page, I don't see anything I can use there. I already have browser bookmarks for any of the forums I visit.

Don Archibald wrote: The 'set as default' option will not be available when you are viewing the collection using the tab which has already been set as default.
But, for example, neither in Tiger nor iTunes, did I set Overview as the default. They appear that way without having done anything. And thanks for the clarification on points.
Before setting to Overview, Set as default is available:
After setting to Overview, Set as default is now missing and I can not make Overview the default. Something I'm not getting?

How do you get rid of default tabs on a document in pages 09?I h

Hi.
I am wanting just one tab on my document, but there are many popping up that I believe are default tabs. I am trying to delete them in inspector but it is not letting me. Any tips???
Thanks!

Select the text you want to apply your tab to and set the tab on the ruler by clicking on it.
In the absence of any specified tabs the tabs will jump to set intervals on the ruler.
Peter

Set Default Tab For A Step

We have a system that has been installed at a couple of affiliate sites in Japan and Romania (we've been developing in Australia). It runs on TestStand 4.2 with supporting code written in LabVIEW 8.6 (although the Romanian site uses TS4.2.1 and LV2010). We have numerous custom steps in a types palette file.
One of the sites has complained that when they add some specific steps (custom Numeric Limit Tests, in particular) to a sequence, the tab shown in the Step Settings pane is the "Limits" tab. It would be more convenient and more useful to show the Edit tab (the one that shows the buttons for the Edit sub-steps).
I realise it's just a matter of clicking on the relevant tab. I also realise that once a file is saved, the last-selected tab is shown for each step when it's re-opened. However, the customer is always right, so I need to see if it can be "fixed".
Is there a way of setting the default tab for a custom Numeric Limit Test step to something other than the "Limits" tab?
Help files, Google and the NI pages don't seem to be forthcoming on this issue.
Thanks,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge
Solved!
Go to Solution.

Thanks Rohama,
I will mark the issue as "not fixable" and be done with it.
Regards,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge

Default tab in Process Purchase order

Hi All,
We are in SRM 4.0 and we recently we upgraded our system to SP12.
After the upgrade, while entering into Process Purchase order transaction "Find" tab is showing by default. But before the upgrade it was showing Worklist as the default tab where we can see all the open work items in that tab.
Is there a way to set "Worklist" as the default tab?
Please advise.
Thanks.

Once the PO is published, you cannot delete it. If you have created a change version for the published PO, you can delete the change version but not already published PO.

Spry Tabbed Panels - Start with no default tab??

Hi all,
Is there any way that I can have a spry tabbed panels widget
and NOT have any tabs open when the page loads? I want to put
multiple tabbed panel widgets on one page for an artist's
discography
example:
Singles
- tab 1 - tab 2 - tab 3 - etc. etc.
Albums
- tab 1 - tab 2 - tab 3 - etc. etc.
Misc
- tab 1 - tab 2 - tab 3 - etc. etc.
I just want the page to look clean and compact - I don't want
any default tab to display. Is this possible? I looked on the Adobe
customization help for the widget but I can't seem to find an
answer. I managed to achieve this by deleting the
(this.defaultTab); part of this line in the .js file:
if (this.defaultTab)
this.defaultTab = this.getElement(this.defaultTab);
But when I did this, if I created multiple widgets, the
second widget and so on's tabs would not work properly, for some
odd reason. I'm kind of a newbie so I apologize for not making much
sense.
Thanks in advance.

Hi all,
Is there any way that I can have a spry tabbed panels widget
and NOT have any tabs open when the page loads? I want to put
multiple tabbed panel widgets on one page for an artist's
discography
example:
Singles
- tab 1 - tab 2 - tab 3 - etc. etc.
Albums
- tab 1 - tab 2 - tab 3 - etc. etc.
Misc
- tab 1 - tab 2 - tab 3 - etc. etc.
I just want the page to look clean and compact - I don't want
any default tab to display. Is this possible? I looked on the Adobe
customization help for the widget but I can't seem to find an
answer. I managed to achieve this by deleting the
(this.defaultTab); part of this line in the .js file:
if (this.defaultTab)
this.defaultTab = this.getElement(this.defaultTab);
But when I did this, if I created multiple widgets, the
second widget and so on's tabs would not work properly, for some
odd reason. I'm kind of a newbie so I apologize for not making much
sense.
Thanks in advance.

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

Set a default tab in ME23N transaction

Hi Guru's
   How can i   set a default tab (Purchase order history ) in ME23N transaction ?
   Thanks and Regards .
   Priyank Dixit

Hi Anil ,
    i am calling ME23N Trancation in a report ...when i click on any purchase order of alv out put ,it calls the transaction ME23N..
Now i want the Purchase order history tab as default for any item which have a GR .
Thanks and Regards ..
Priyank Dixit

Change documents for DEFAULTS tab in su01

Hi all!!
Somehow SPOOL CONTROL option-> output device for a user changed(under SU01--> DEFAULTS tab) in my Production system.
Question> can i find out change documents for DEFAULTs TAB in SU01 for a user ID?

In fact I was believing the same.
I was wondering if we could add one new column to sap standard tables which will store any change documents specific to defaults tab for users. But no idea how lengthy this could be!!
Any suggestions???
Please do reply if there is any other option to find.

Transaction iView - pass parameters to non-default tab

Hi Experts,
I have a requirement to call transaction iView from Webdynpro ABAP application by passing some default values.
I am able to call the iView and also able to pass parameters. My requirement is to pass values to the tab in iView which is not the default tab when I execute the TCode.
Is this possible using absolute navigation...??
If yes please let me know how can that be achieved...
Thanks in Advance....!!!!
Regards,
Shruti Shah

Hi,
Do you already know a way to reach this transaction to a desired tab with out using webdynpro ?. Is it possible at all in any way to start this transaction and position to a particular TAB.
If you do not know that then i am afraid that no one could help you out in forum.
Good luck

[svn:fx-trunk] 12909: Pre-FP10.1, set default tab stops in TLF.

Revision: 12909
Revision: 12909
Author:   [email protected]
Date:     2009-12-14 10:33:13 -0800 (Mon, 14 Dec 2009)
Log Message:
Pre-FP10.1, set default tab stops in TLF. Without this, if there is a tab and TLF is measuring width, the tab will measure as the rest of the remaining width up to 10000.
QE notes:
Doc notes:
Bugs: SDK-24589
Reviewer:
Tests run: checkintests
Is noteworthy for integration: yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24589
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as

SpryAccordion.css
You have an error that is killing the rest of your code shown below in red. Remove it.
.AccordionPanelContent {
    margin: 0px;
    padding: 2px; /**suggest using 12px or more**/
    background-image: url(../infobkgd.png);
    background-attachment: fixed;
    background-repeat: repeat;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 12px; /**suggest using 16px or more**/
    color: #FFF;
    overflow: hidden;
    height: 40
[x;
    height: 100%;
Nancy O.

Default tab in sapscript

Hi ABAP Gurus,
How do you set the default tab in SAPSCRIPT?
I need to put a tab prior to the item text (or to this statement):
/: INCLUDE &RT_NAME& OBJECT EKPO ID F01 LANGUAGE EN
I went to SE71>header>basic settings
then i added a certain value at "Tab Stop"; Unfortunately, when i tested the form. The "tab" was not implemented.
Thanks in advance. Points will be given...
Best Regards.
Brando

Hi,
You can put the Default paragraph fprmat in the SAPSCRIPT, then inside the paragraph format, maintain the TAB so that this will become defalut TAN for that SAPSCRIPT
Regards
Sudheer

Help! Refresh default tabbed panel

Hi,
I have a problem with my spry tabbed panels. The default tab
is set to be the 1st tab, when I move to 2nd tab and navigate
through the content, as the page refreshes, and before it is fully
loaded it shows the content of the first tab for about 20 seconds
or so....then the page finally goes to the desired content on the
2nd tab....
How can I make it so this does not happen and it looks like a
smooth transition as I navigate through my pages?
Thanks,
Brandan98

Hi Ken:
When I insert a new spry panel it appears with all the css from the other page.
When I began to make changes the other page reflexs those changes.
Don't know how to get a separate SpryCss sheet. Do you?

Default tab in Business Partner

Hi,
How can we change the default tab in the business partner specific to a role.
Thanks
Surender

Hi Vikash,
Tried in BUPT, BUSD - Bp roles, could not find a way to change the default tab. Tried in Cross application components, BP-field groupings also but no luck. The only way i can think is any field which is 1st in the tab sequence in the VCT screen configuration is defaulted, so can we change the default in any other way.
Thank You
Surender

Default Tabs - Beware, I'm a Beginner :-)

Similar Messages

Maybe you are looking for