Default text in description for a task

Morning,
I was wondering if it is possible within a task or appointment if a value is chosen from a pick list it would then load default text in a description field.
For example i am hoping for users to choose a value then default text would appear in the description field asking questions for the users and then this information could be passed onto a department via workflow as well as the information stored on the system.
Any assistance would be greatly appreciated.

It is possible to set up workflow so that every time the Type field is updated the Description field is populated with the value in the Type field. The workflow condition would be PRE('<Type>') <> [<Type>] and the action would be update values and set the Description field to FieldValue('<Type>'

Similar Messages

Send to: Changing default texts/system-url for emails

Hi, I would like to change the default texts for emails send by "Send to". The specific problem is, that the system-url in the link to the object isn't correct.
for example: http://testsystem... instead of http://productive...
Have you got any ideas where to change this?
Thanks a lot
Sandra

Hi Sandra,
I don't know where you have this problem but if this when you create a room you should modify in:
System Administration-System Configuration-Collaboration- Room Backend Properties- you can generate the access url to collaboration room.
Patricio.

How do i restore default text/font settings for fire fox?Text is not displaying correctly some letters not dark and see odd characters inplace of letters in words

How do i restore my text so that all words are uniform in darkness?Now some letters are fragmented or missing a part of it and see odd characters instead of letters in some sentences.Ive tried different fonts in the Options still the same.Would like to
be able to restore my default settings for text/fonts.Would that eliminate this problem?

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Default text for html:textarea..

Hi All.
How to populate a textarea in struts(<html:textarea>) with some default text.
Waiting for your suggestion in this regard.

Why are you duplicating the answer after 2 days? The answer is already given. Just leave the thread as it is as long there are no unanswered questions from the topicstarter.

DEFAULT Heading, Title, Main Text...for google search result??

Hi,
Every pages when we added in iWeb it'll come with some default Text Box shown as
*"Type a heading for your webpage here", "Type the main text for your page here", "Type the title for the page" ...*
Do the above default text box helps for Google search result?
Any other useful purpose for that?

mactreouser wrote:
What bout Adding a Text Box? Isn't the same thing of the Default Title Box? Or it must be place at the Top ? or it already pre-set for search engines?
You could find out if its the same thing by doing the following:
Add a text box to your home page, publish your iWeb site to a folder, click on +"Visit Site Now"+ and then in Safari do +View > View Source+. Then look for the title tag that the article talks about:
<title>Your title here</title>

Change of description in standard task TS 10407929

How to change the description for standard task TS 10407929 in T code pftc_chg, it says, to maintain the object TS 10407929 in its original language Deutsch.

hi George,
use the TX pftc, select the task 10407929 and view (not change).
Basic Data Tab you will have a button "redefine work item text"
As far as I know this should work also in english language

Default text for a dimension in Webi

Hi Experts,
What is the default text which a dimension takes up in Webi report created on a universe and Bex query ?
Here i have all three text maintained for a dimension - short, medium, long.
and the properties in the IOBJ set as - Text and key,Text Type as medium text, Bex description as Long descritpion.
I have not changed anything at the universe level (any text definition)
The text which is coming in my webi report is coming as short text even though medium is set in the IOBJ properties.
Please help me on this in understanding how the text are pulled in BO Webi report.
regards,
Amit Jain

Hey Amit,
I faced with same problem,
The WEBI view text according to definition in BEx Query in display properties of characteristic.
If you build selection prompt based on this characteristic , there WEBI search engine use Provider Specific properties.
I wrote a little blog post about this issue
http://digilov.blogspot.com/2011/11/searching-by-bex-medium-text-problem-in.html
I hope it will help you
Regards,
Aharon

Default description for Activity

Hi Experts,
I need to set a default text for the description field of an activity type.
How can I do so?
Best regards,
Cristina

Hi Daviz,
Thanks for your answer.
We are working with CRM 4.0. In the meantime we have found the solution by our own:
Copi of Badi: CRM_ORDERADM_H_BADI.
Here within the method if_ex_crm_orderadm_h_badi~crm_orderadm_h_merge
Move description to table CS_ORDERADM_H_BADI, in the field DESCRIPTION.
IF IU_ORDERADM_H_WRK-process_type = 'Z001'.
CS_ORDERADM_H_BADI-DESCRIPTION = 'your description'.
endif.

Default text size in Compressor is too small for normal human eye

Is there any way to change the text size in Compressor 4 in the windows? I can't find any.
The normal default text size is way too small for any normal human being eye to read clearly.
Please, have mercy on us, whoever designed the tiny fonts! Not fair to the rest of us . . .

Well, guess we folk with not-too-good vision will simply have to keep on trucking the best we can, eh? We can't enlarge text, so as a result we can't use software like Compressor like the rest of the population. Sad to say, especially with a company like Apple . . .
Yeah, well I gave the Apple Compressor Team my feedback, just like I've done the last 3 months with other things, then of course the feedback from us all melts into the either, and we never really know if anyone reads it, like they say. Me thinks not. This is the only feedback I'll ever get, I'm afraid:
QUOTE:
Thank you for your feedback on Compressor.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the Compressor Team. If we need to follow up with you on your ideas for improving Compressor, we will contact you directly.
We appreciate your assistance in making Compressor better.
Compressor Team
Apple

Filling of S table fails for fields with free form text or description

Hello Everyone,
We are trying to rollup a new InfoCube into our BWA system and it fails with a short dump CONVT_CODEPAGE with exception being CX_SY_CONVERSION_CODEPAGE when filling up S table for a description field.
The only difference between the new InfoCube we are trying to load and the other existing InfoCubes is that, the new InfoCube we are trying to load has a field/InfoObject which is free form description for a line item field.
Also, when I checked the application log the system gives out the message "A Character Set conversion is not possible".
Did anyone encounter this issue when trying to create BWA indexes for InfoCubes which have text columns in the InfoCube.
We are currently at revision 52.
Thanks in advance.

Hi Dharma,
It's an interesting and new BWA case for me, so sorry no direct answer. I'll try to replicate it in free time I hope you opened a message with SAP Support for this.
From pure BW modeling perspective I normally model this in a way that this "description" Characteristic A is marked as "Attribute-only" and then used as a display attribute of another Characteristic B, e.g. Line Item Number. From BWA perspective it means that A is not indexed into the accelerator and joined only for display during OLAP time.
Regards,
-Vitaliy

I have created a form that contains fields with default text for a user to update/personalize. Is there a way to style the text so I can quickly identify changes to default text in a field?

I have created a form that contains fields with default text for a user to update/personalize. Is there a way to style the text so I can quickly identify changes to default text in a field?

George - Thanks you so much! Actually, i'd love for the text color to be red font color. Could you send me the script for that? And I assume I just copy and paste the script into the field properties (see screenshot)?
thanks again!
Seth

Default text size for a scaling/auto field

Hi All,
Im currently using Adobe Acrobat X Pro and am working in a PDF all written in size 10 font. I have text fields that need to be entered and scale if too much text is written. I've set the font size as 'Auto' and this scales without issue, however when the field is first entered and not yet scaled (as in, there is enough room for the text) it defaults to size 12. I'm needing this to default to size 10, and still be able to scale if too much text is entered, but I can't find any options for this. I essentially lose my ability to set the default text by setting it to 'Auto' yet it's still going to size 12 by default - how can I change this setting to size 10?
I've tried searching various forums for this answer but can never find exactly what I'm after - Any help will be appreciated.
Joel

Thanks for the response George.
If that's the case, would I be able to write an 'on mouse down' java script as a work around, or will these font sizes be dealt with the same. As in, if I change font size with a script to 10, will this effectively remove my 'auto' text size that allows scaling?

How to Check LT check box in IA02 - for Long text for Equipment Task list operations

Hi Experts,
I am trying to upload text for Equipment task list,i am able to upload texts at header,but not for operations.
At operations level - we have a check box LT which is grayed out - when am manually making an entry ( LT Check box - is getting checked when am creating entry manually ) - after manual entry - when i tried uploading text is working fine.
Can someone please tell me how to get the check box - checked - while saving text - using FM : SAVE_TEXT .
Cheers,
Rali K

Try this:
function findNodes(vNode){
 if (vNode.className === "field"){
 if (vNode.isPropertySpecified("name")===true){
 var myStateName=new RegExp(vNode.name);
 var returnValue = GFL.search(myStateName);
 if (returnValue!=-1){
 this.ui.oneOfChild.border.fill.color.value="192,192,192";
 this.access="readOnly";
 else{
 this.ui.oneOfChild.border.fill.color.value="255,255,255";//whatever colour is open access
 this.access="open";
 for (var a=0;a<vNode.nodes.length;a++){
 findNodes(vNode.nodes.item(a));
findNodes(xfa.form);
Kyle

[svn] 3148: You can now use CSS styles to set the default text format for TextView.

Revision: 3148
Author: [email protected]
Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
Log Message:
You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
Reviewer: Glenn
Bugs: -
QA: Lots of new stuff to test!
Doc: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
Thanks for taking a look though!
Shaun

Changing default text color for new emails

My wife has decided that she wants all of her out going messages to be in a blue 18 pt font. I figured out how to get the 18 pt font, but can't find how to chaneg the default text color. Any help would be appreciated.

Changing your SIP domain will effect both Lync 2010 and 2013 (it happens at the top level).
Here is some information on doing this: http://blog.insidelync.com/2013/06/anatomy-of-a-sip-domain-change/
I'd suggest getting it right prior to adding in your Lync 2013 topology, just for the sake of simplicity.
Rather than changing your SIP domain, is simply adding an additional SIP domain an option?
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Default text in description for a task

Similar Messages

Maybe you are looking for